Component Learning Interactions

Anybody familiar to this component and want to help me
out?:-) I am trying to make an online quiz with this, but since I
am norwegian and working with flash 8 (yes, I a about to upgrade to
cs4 in the near future) and the norwegian alphabet has specific
characters...is it possible to change the languag in the component?
Appreciate an answer:-)

Hi Conrad!
As you have no doubt already realized, using the Learning
Interaction templates that are available in Flash MX / MX2004 and 8
will not work at all in Presenter content.
The coding methods conflict while playing back within the
Breeze environment and I
think it has to do with the _dropTarget property as part of
the interaction's codebase. The _dropTarget method is NOT supported
in Breeze, but the hitTest() method IS!
I have written a few drag and drop exercises that do work
within Breeze content, and you have to use the hitTest() method to
accomplish it.
As you already have discovered, the bottom line is that the
learning components were intended to be "stand alone" objects that
could be incorporated into a web page (or even a CD as these
objects are nothing more than swf files). Aside from the fact that
the prebuilt/preconfigured learning objects in flash don't always
work in Breeze, in my mind, the bigger question here is the ability
(or more accurately) the inability to connect these SCO's to an LMS
for tracking. As stand alone objects, they're actually pretty
handy...but not in Breeze.
I realize this doesn't help much with what you're trying to
do, but from my perspective, you're better off creating your own
drag n' drops.
I've got a bunch of examples to share if you'd like to take a
look...just send me a PM or email if you're interested.
Rob
[email protected]

Similar Messages

Flash learning interactions, what am i doing wrong

Hi all
everytime after i modify and then save and publish a learning
interaction...... i get a standard error message and flash shuts
down. also none of the modifications i make save...... how do you
save the the modifcations made to a learning interaction ? one i am
in the component inspector and i make changes to the Learning
interaction...... where do i go to save it, there is nothing in the
component inspector and paramters that points to saving..... so i
have been saving the fla as normal... eg under file menu 'save
as'... i then test the movie and get nothing.
Can anyone help ?

Dave,
> I have a Flash 8 FLVPlayback component on stage, with
> an instance name of 'vid'. In a frame script I have:
>
> vid.setMedia("dd2.flv");
> vid.play();
The FLVPlayback class does not feature a setMedia() method,
that I can
see. According to the docs, FLVPlayback "wraps"
mx.video.VideoPlayer. Not
sure if that means "inherits," but assuming for sake of
argument that it
does, the VideoPlayer class does not faeture a setMedia()
method, either.
Unfortunately, the docs get a bit cryptic at this point, IMO.
The FLVPlayer
Component has a contentPath property, as you mentioned, but I
don't see the
same property in either of the aforementioned classes.
Perhaps something in the inheritance chain provides for a
FLVPlayback.setContent property. I see references to a
mx.video.NCManager
class, but can't seem to find that class reference anywhere.
If you can do without the FLVPlayer Component, you may just
want to use
a Video object to load your external FLV.
http://www.quip.net/blog/2006/flash/how-to-load-external-video
David
stiller (at) quip (dot) net
Dev essays:
http://www.quip.net/blog/
"Luck is the residue of good design."

Learning interactions and Flash player

I am trying to place a standalone multiple choice learning
interaction on my timeline. I can place it on the stage and see
everything in the component inspector, (only broke apart once!) but
when I test it, it appears that I cannot see any of the UI
components such as the checkbox or radio buttons. Searching this
forum, someone suggested previously that I had to be running Flash
Player 65? I installed Flash Player 9 from this site to ensure I
had the latest and it still does not work. I tried it at work,
where we are running Flash Player 7 and it seems to work fine. Is
it still my Flash Player? Do these interactions ONLY work with a
specific player? If so I need to know so that I can specify that in
the delivery. Thanks.

open the fla in flash and see if there's an flvplayback component on stage. if there is change its size to match your flv. if not, search for .source (as3) or .contentPath (as2). that will lead you to the object that plays the flv and you can assign its size using actioscript .

Modify Learning Interactions properties panel

Hi there,
I was wondering if I can modify the parameter panel of a
Learning Interaction component to make it more user-friendly for a
Flash author? For example, I would like to change a single line
textfield to a multi-line textarea. Has anybody tried that and
could provide me with some direction and help?
Thanks,
Dan

Are you trying to assign the value from the array:
SessionArray[0].interaction_ID to your variable qresult?
If so, you're using the wrong operator symbol. "==" is a
comparison operator (it tests to see if something is equal to
something else and returns a "true" or "false")
To assign the value you'd do this: qresult =
SessionArray[0].interaction_ID; (note the single "=")
Then you can load the value of qresult into your text field
in a separate function called from your button event
handler.

Modifying components in learning interactions

I've created a multi-choice quiz, but now I want to be able to change the location and text color of the interactive messages that appear when the user takes the quiz.
I created the quiz by dragging the learning interaction component to the stage. Everything works beautifully. Just want to format and change the values of some of the properties, such as the location of the feedback text, the text color, etc. How do you do that?
Thanks for any help you can give me!

An update . . . I'm able to change the question text font, color and size using the values box in the properties of the component. However, I can't figure out how to format the options' values, as well as the feedback boxes. Specifically, for the feedback text boxes, I would like to change their placement.
Thanks so much for any pointers.

Customize learning interactions

Hello everybody!
I have added some learning interactions directly from the
common library "learning interactions" to my flash project).
I would like to know:
1) how to add a page result with the user's score
2) if I can access learning interaction's properties by
action script (i.e. I have added to the stage a "Fill in the blank"
interaction. Can I set the question dinamically, reading, for
example, a xml file by action script or the only way to do it is
editing manually the component inspector? As a matter of fact I
want to develop the same e-learning project in various languages,
if it is possible to set questions, answers and messages of each
interaction dinamically I will save a lot of work).
Every whitepaper, article, tutorial about it would be very
precious.
Thanks a lot and have a nice day
Stefano

Well,
I have found a solution to the first problem, that is to add
a result page to a project where have been added some learning
interactions directly from the common libraries (instead of using
Quiz Template).
Values about user's answers are stored in the array
SessionArray, so it is possible to do something like this:
var tot:Number=0;
for (i=0,i<SessionArray.length;i++){
if (SessionArray [ i ] .result=="C"){
tot++;
By these code lines you count the amount of user's correct
answers (C is for Correct and W is for Wrong).
Pay attention: for some reason square brackets are truncated
so I had to insert a space between them and array index i.
So long
Stefano

Problem with Button in Learning Interaction

I have created a Flash file with 4 "Fill in the Blank" questions (from the Learning Interactions continued within Flash CS3) at the end. I'm then using the swf file in two different ways. One way simply loads the swf file onto a 'stand-alone' page on my website and it works perfectly.
The other way I want to use it is integrated into a more complicated website where I have a Flash File into which various swf files are loaded when needed. In this version the "Control Button" doesn't change to "Check Answer" and "Reset" as it should and the whole question doesn't work.
The working version is at http://web.me.com/ginneswatsonkelso/New_Chemical_Resources/Name_Isomers_Alkanes.html
Select "4 For You to Try" to go directly to Quiz Questions.
The non-working version is at http://web.me.com/ginneswatsonkelso/New_Reaction_Pathways/New_Reaction_Pathways.html
Go to "Extras" in Menu and select Naming Alkane Isomers, then "4 For You to Try" again.
I'm using ActionScript2 and set for Player 9.

Yes, my original technique was to upload the Parent SWF to a folder and then the HTML widget on my webpage would load the file from that location. As you say, all the daughter swf's had to be uploaded into the folder created for that webpage when iWeb uploads my website to MobileMe. This has worked fine for all my other daughter swf's but (I'm presuming) there is something about the Learning Interaction that doesn't let it work this way.
The other disadvantage of doing it that way is that anytime I tweak the original webpage and iWeb uploads the changes, it recreates the page folder minus all my daughter swf's and I have to upload them manually again.
What I've now done is uploaded all the daughter swf's to the same folder as the Parent and added a full web address to this folder in all my loadMovie commands in the Parent swf. Done this way, the swf with the Learning Interaction works as intended.
Many thanks for taking the time and interest to help.

Learning Interactions not working in Chrome

This is my first time using Captivate (8.01). My problem is that 3 widgets/learning interactions are not working when viewed in Chrome. It is a responsive project. They work fine in Safari.
Would greatly appreciate any information about how I can fix this. Thanks.

Yes. Jeopardy, Process Circle and Millionaire. I did find out (through a nice, long -and helpful -chat with Adobe support) that these interactions will work on the Chrome browser when accessed from an LMS. I needed to send them out to reviewers because I didn't have access to an LMS. I just defaulted and asked them to use a different browser.
Thanks for replying and offering to help.

How Can I Remove Tabs That I Added in a Learning Interaction Widget?

Hello, I inserted a "Tabs" Learning Interaction widget into a Captivate 8 project I'm working on. Adding tabs is easy enough by simply hitting the plus button. But when I want to remove a tab, I can't for the life of me determine how. Any help would be greatly appreciated! Thanks

When you double-click on a Tab button in the Interaction Properties, you'll see a minus sign that will allow you to delete that tab. Beware: you need a minimum of at least 2 tabs, maximum is 5 tabs.

Using Flash Learning Interactions in Captivate

Hi there,
I am developing a short practice quiz in Captivate, but for
one of the questions I want to use a Flash CS3 learning interaction
(the "Hot Spots" one). I get the Flash file built, import it into
Cpativate, and everything works.
Now for the big question - how do I get Captivate to track
the successful/unsuccessful action from this question in a quiz? I
want to present users with a results page at the end of the
practice quiz, but since this question is not built with a
Captivate question slide (like m/c, t/f, etc.), how can I track the
result and include it on the results slide at the end?
Thanks in advance for any help!
Cheers,
Shawn

Hi J and welcome to our community
There is no way (back door or otherwise) that I'm aware of to
do this. Unless, of course, you mean to use Flash 8 and export the
Flash in a version 6 format.
Hopefully we will see Flash 8 files working just dandy in
Captivate version 2.
Cheers... Rick

Flash learning interaction - extension

Hellou everybody, please, i need Flash learning interactions wich is the extension for creating elearning apps and quizzes inside flash cs6 and older version as a part of eLearning Suite product. Because adobe stopped any suites, new flash cc have not this extension. Is there some way to download it?
Thanks for any response and sory for my language
Best regards
Yarik

Thanks for answer. I have licensed eLearning Suite 6 wich include Flash CS6 and learning interactions extension, but now i use Flash CC and i think will need not to install flash cs6 specially only because i need learning interactions.
The same problem about Dreamweaver and Course builder interactions...
Do you think will adobe release this small but usefull extensions?

Adobe Captivate Help | Smart learning interactions

This question was posted in response to the following article: http://helpx.adobe.com/captivate/using/smart-learning-interactions.html

Is the Scrolling List interaction just a fancy way of displaying content versus a traditional text caption? Thank you.

Captivate 8: Learning Interactions.

How can I:
1). Add additional options to "Millionaire" like in "Jigsaw". I am working with multiple-choice questions that have 5 options but "Millionaire" only allows 4. Working with "Jigsaw", I can add options but cannot with "Millionaire".
2). Attach images to questions and correct/incorrect boxes in "Millionaire" and "Jigsaw". Some questions have diagrams.
3). Attach audio to questions and correct/incorrect boxes in "Millionaire" and "Jigsaw".
4). Print certificate widget after "Millionaire" and "Jigsaw".

Double post, is also in the Advanced section.
Learning interactions are canned, you cannot change more than what is provided. Create your own interactions if you want to do that.
None of those game learning interactions will take the score from the game itself, score attached to it will be given if the game has been played (even for only a limited time).

Flash learning interaction and Course Builder for CC products?

Hi all, Could anyone advise me where I could get extension Flash learning interaction for Flash CC and Course Builder for Dreamweaver CC? Sometimes their use and after stopping the development of eLearning Suite I anywhere on the Adobe site found these extensions.
Thanks for any response.
Yarik

You would be better advised to ask these questions on the Flash or Dreamweaver forums. This is the Adobe Captivate forum.

Flash learning interaction and Course Builder extensions for CC products?

Hi all, Could anyone advise me where I could get extension Flash learning interaction for Flash CC and Course Builder for Dreamweaver CC? Sometimes their use and after stopping the development of eLearning Suite I anywhere on the Adobe site found these extensions.
Thanks for any response.
Yarik

You would be better advised to ask these questions on the Flash or Dreamweaver forums. This is the Adobe Captivate forum.

Component Learning Interactions

Similar Messages

Maybe you are looking for