Scrap Sales GL , which type of cost centers need to assign in OKB9

Dear Seniors,
G L account : Scrap Sales:
For this GL a/c , cost element created with Cost element category u201C11u201D (Revenues).
Now in OKB9 i want to make assignments:
With each b.area and cost centers.
Now my doubt is :
In OKB9 which type of cost center I need to assign from the below.
1.Cost center should be with
Cost cntr category u201CFu201D (Production)
Or
2.Cost center category u201DVu201D (Sales)
and another doubts is , in Cost center -control tab: Actual revenues check box, should i select or not in any case.
Please clarify my doubt.
Thanks in Adv

Hi,
As scrap sales are revenue to the company, undernoted things to be noted here :
1. The cost element category is V - Sales and the control indicator actual revenues box to be unticked.
     The posting will be statistical for revenue elements.
2. The revenue recognition has to be equally done in VKOA for the account assignment of this account.
3. You can create a seperate order type for scrap sales and a sales pricing procedure in SD.
4. Check whether the scraps are defined to capture Tax Collected at Source, if so, you have to define
     condition types for them too.
5. If the material itself is defined as scrap material then in Material master the Profit Center would have
     been assigned and to capture the revenue assign the scrap sales revenue in VKOA.
Best Regards,
Sadashivan

Similar Messages

How many cost centers can we assign to a org unit

can anyone pls tell me tht How many cost centers can we assign to a org unit ??
thanks
waiting for reply asap

Hi,
As mentioned above the common is to assign one cost center. You will see it in IT0001. But in case you need mor cost center to be assign to one employee you have the option to go to IT0027 and in there you may assign more cost centers base on different percentage.
Hope it helps.
Kind Regards,
Edoardo

Scrap Sales-VAT Condition Type Not Copying into Billing Document.

Dear All
I am facing problem while billing a scrap sales order.
1. Even though condition record has been maintained for JIVP, the condition is not picked automatically.
2. I enter it manually and save the document and later do delivery and billing; in billing, if I go to Conditions Tab, I do not see VAT condition copied into the document.
Naturally, when I am doing analysis, only PR00 condition type is showing.
Kindly require your suggestion as to where I might have gone wrong.
Thanks and Regards
Adithya

Prasanna,
It is fine to press Release to Accounting button, but the issue has not yet been identified to fix and then Release to Accounting.
When I go to document flow and check the accounting documents in Goods Issue Document, Accounting document has not been created only, only Profit Centre and Controlling Documents are created. Am looking on the same y it has happened like this.
Thanks and Regards
Adithya

Which type of setting we need to maintain in query to get Multi Provider data

HI Friends.
I created query on top of Multi Provider. Multi Provider created on top of Hybrid provider and Standard cube.
When i executed the Query on top Multi Provider, i can't see the data of Hybrid Provider through Query.
In BW side i can see the data on Multi provider.
Can any one help me.

Hi,
First need to understand what is the use of Hybrid Provider in what cases we prefer provider.
Multiprovider :can be created based on DSO & Infocube
Hybrid Provider : Can Be created based on DSO / HybridProviders based on direct access.
For more Info on Hybrid Provider : Creating HybridProviders - Modeling - SAP Library
There are no settings to get Hybrid provider data Or Multiprovider data in Bex .
Even though if we need to do any settings we can do it in SPRO , check once in SPRO tcode related to Bex reporting settings.
Regards,
Seshu.P

Several cost centers in one sales order

The situation is.
Weu2019ve got the task to find solution how to create sales order document with several cost centers.
Now we use order reason to assign cost center in sales order.
We use only one order reason in one document and it means one cost center in one sales order document.
But we need to have opportunity to choose several cost centers. We mean assign different cost center for each item.
For example sales order items:
Material 1: Electricity u2013 X1 (cost center u2013 Y1);
Material 2: Gas u2013 X2 (cost center u2013 Y2 );
Material 3: Petrol u2013 X3 (cost center u2013 Y3);
u2026
Material n: Services u2013 Xn (cost center - Yn).
The document sequence :Quotation (VA21) -> SALES order (VA01) -> Billing (VF01)
Could you give me the recommendation or advice for this task?
Many thanks.

HI,
The Cost Center Determination settings is in OVF3, the standard works only at the header level though, so it would not work if cost center is needed on the line item.
For this case I suggest to try from CO view:
A material is linked to a profit center. From this profit center you can determine a cost center using txn OKB9
In combination with the material's account assignment field and account determination customizing, an alternate revenue account can be determined for this material. ("Normal" revenue accounts are to be used in combination with CO-PA).
If this account is a cost element with category type "1" you need the entries in OKB9.
Hope this help!
Regards!

Multiple Cost Centers in PO

When a PO is entered with Multiple Cost Centers, and Account Assignment Cateogry K, the GR Non-Valuated indicator in the item details (Delivery Tab), gets checked automatically. This caused the subsequent GRN to be non valuated as well and no accounting document were posted at the time of GRN. How can this be rectified ? i.e How to enter a PO with multiple cost centers and Acct Assignment Category K, which is valuated and thus costs are allocated at the time of GRN (mvt type 101) ?

Hi,
You GR is not valuated for Cost center PO as GR Non-Valuated Check box selected for cost object K which can be cross checked in OME9 t.code for account assignment category K,if want GR valuated, just remove the check box and create PO, do GR and find the difference.
As you want to post multiple accounts with single cost center, then use t.code:OME9, double click K, and enter 2 in I 1D-Acct assignment field instead of 1 and save. Now create PO, do GR and find the difference.
Regards,
Biju K

Reporting Restrictions by Cost centers

Hi
I have a cost center reporting role which has an object K_CSKS where we maintain cost center values. Now we have a many CCs maintained for this object. SO manager of CC 100 can also see reports for CC 200 which we want to restrict. How can we restrict CC access for a user. I want to avoid creation of 100s of roles by each CC.

Hello Vishwas,
I suggest you to do the following :
each cost center belong to a cost center group. you can see the connections with transaction KS13.
Anyway , to make the creation of this roles easier, you need that the fields KOSTKL (cost center) and the field RESPAREA (CO-OM Responsibility Area) will be in the ORGLEVEL area.
when this fields are there , you create a master role with all the transaction that are needed to manager of CC.
you create the first derive role with a specific cc or a cost center group which contain his cost centers .
the second derive role is a copy of the first one and all you need to do is to update the new cc and the cost center group at the orglevel area.
Regards,
Haim Brauner

Activity Types to Cost Center

hi,
how to assign activity types to cost centers ??
G

I got a message like this when i try to include the activity rates to work centers, what settings do i want to maintain ?
Activity type 10-140 not set up for cost center 1000 MPT080
Message no. CR061
Diagnosis
You are attempting to assign activity type 10-140 to the work center. However, this activity type has not yet been set up in controlling area 1000 for cost center MPT080.
Procedure
Assign an activity type set up for cost center MPT080 to the work center or
assign the desired activity type to cost center MPT080 within cost center accounting.
Thanks

Numbering convention for cost centers

Hi,
1. Can the cost centers be be assigned internal number ranges?
2. Can the cost centers be alpha-numeric to identify between company codes, if few company codes are assigned to 1 controlling area?
Thanks
Sridevi

Hi
Both are correct Cost Centres to manage internal no. range. One Controlling Area can manage morethan one company code.
Shammi
assign points if it is helpful

Which eSATA cable do I need?

I've never used a SATA device before and am confused about which type of cable I need to connect my external hard drive to my computer's SATA port.
The external drive is a 1TB Acomdata pureDrive with an eSATA interface (here are its specs). My computer is a Macbook Pro 5,5; I bought it in September of 2009, so I'm assuming it's the mid-2009 model. Thanks for any tips. The more specific you can get, the better, as I have no idea what I'm doing!

Your drive uses a 7-pin eSATA connector. This cable will work:
http://www.walmart.com/ip/StarTech.com-ESATA6-Shielded-External-eSATA-Cable/1307 8073?sourceid=1500000000000003142050&cisrc=14110944&cisku=13078073
Is this your computer?
http://www.everymac.com/systems/apple/macbook_pro/stats/macbook-pro-core-2-duo-2 .8-aluminum-17-mid-2009-unibody-specs.html
If so, you have an ExpressCard 34 expansion slot, so you can buy this
to add an eSATA connector to your computer:
http://www.walmart.com/ip/Sonnet-TSATAII-E342P-TEMPO-2-Port-eSATA-Express-Card-P C/13216233?sourceid=1500000000000003142050&cisrc=14110944&cisku=13216233
If your computer doesn't have an ExpressCard 34 slot, boo-hoo!
You'll have to try to get this to work with your Firewire connector,
but then it will have Firewire speed:
http://firmtek.stores.yahoo.net/spyderhub.html
if it works.

In which scenario sales order costing is needed ?

Is it mandatory to have every time for a sales order to have sales order costing?
is it mandatory to have SO costing in MTO scenerios always?
in which scenerio SO costing is not applicable in MTO scenerio ?

Dear ,
POC is a Cost object in Product Cost by Period that collects the periodic actual costs incurred in the production of a materia.
Product cost collectors are independent of the production type. This means that you can collect actual costs on product cost collectors in the following production environments:
In order-related production (that is, when you are using production orders) when you want to analyze the costs by period rather than by lot
In process manufacturing (that is, when you are using process orders) when you want to analyze the costs by period rather than by lot
Repetitive manufacturing : In repetitive manufacturing you always use product cost collectors as cost objects.
Few important points from Forum Experts
u2022 Object in cost accounting used in Repetitive Manufacturing.
u2022 A separate product cost collector can be created for each production version or material. The collected costs are settled to inventory at the end of the period.
u2022 The functions performed for product cost collector during the period end closing process include :
u2022 Work in process (WIP) caculation
u2022 Variance calculation
u2022 Settlement
u2022 In Repetitive Manufacturing, all costs attributed to the production of a material are collected on a product cost collector and settled periodically (period-based Controlling).
u2022 The product cost collector is settled periodically according to the posting period (for example monthly) .
u2022 For a material , product cost collector is made for each version
u2022 The actual cost collected can be viewed through product cost collector
you cannot use product cost collectorsfor the following:
- Production orders or process orders that are manufactured for a sales order stock or project stock
- Production orders or process orders that are part of a collective order
- Joint production environments
Hope this will give you an idea .
Regards
JH

Profit center which are allocated to Cost centers

Hi,
Can anyone tell me any transaction or report through which I can find out which profit centers are allocated to wich cost centers.
Thanks,

Run report KS13 - Cost Centers: Master Data Report . add profit center to your layout. It lists all the cost center master data.
pls assign points if helpful as a way to say thanks.

Which Access sequence will use for sales tax condition type for TAXINN

hi.,
which Access sequence will use for sales tax condition type for TAXINN procedure.pls give one example (Access sequence) and give fields.
Because i couldnot create the condition record,the system not accepted for tax indicator.
Regards.,
lakshmanan

We also got the same problem with our client and escalated it to SAP.
they advised to use the access sequence JIND which consists of condition tables in the order given below
Step Condn Table
10 354
20 355
30 40
Attach this to your condition types.
Rewards if it helps.
Regards,
Anbu

OKEOK: in which table can I see a certain Group and its Cost Centers ?

Hi All,
with reference to the Standard Hierarchy for Cost Centers (OKEON) , could anyone tell me in which SAP table i can find the Cost Centers associated to a certain Group?
Thanks a lot for your help.
G.Rossi
Moderator: Please, search SDN; this question has been asked several times on the forum

Hi,
all CO groups are stored in tables SETHEADER, SETLEAF, SETNODE. The values assigned to groups are stored in SETLEAF, for cost centre groups: SetClass 0101, SetName: the name of your cost center group (no matter if its standard hierarchy or not).
Best reards, Christian

Sales Commission poting to Cost Centers Through Sales Order

Dear All
I have a situation. My Client want to post commission on different Cost Centers for different materials on the processing of Sales Order.
I mean when a sale order is processed the Commission will be expended in One GL but it should be posted to different Cost Centers for Different Materials
Can any one please help me how i can configure this
Regards
Bilal Athar

Hi,
You can try to create a substitution in CO (OKC9) and to substitute cost centre based on material number - COBL-MATNR (grouped in sets).
Regards,
Eli

Scrap Sales GL , which type of cost centers need to assign in OKB9

Similar Messages

Maybe you are looking for