Screen application split

How do i make my screen split into equal sections (two)? I accidently made it happen somehow with my bluetooth mouse, and I can't figure out how to do it again. It maximized two aplication screens and split the screen in two. How do I do this again? Thanks
MacBook Pro 17' Mac OS X (10.4.7)

You might be talking about Expose which is a function that allows you to view all open windows and then select the one you want up front. Under System Preferences, click on Dashboard and Expose. There you will see keyboard and mouse shortcuts. You can select for example the right click button to activate Expose.
Let us know if this is what you had in mind.

Similar Messages

How to setup the Home Screen Application

Hi,
I'm using Nokia 5630 XpressMusic.
When I goto Menu->Settings->Settings->General->Personalisation->Standby Mode->Home Screen Application, there is a list of application available for selection(Mark/UnMark) as below:
O Shortcut bar
O Calendar
O WLAN
O Contacts on OVI
O Contacts bar
I will be able to check the applications that I wish to appear on the Home Screen. My question is how to setup a list of application available for selection. For example,
O Shortcut bar
O Messaging
O WLAN
O Calculator
O Web
Pls advise!
Regards,
Toyogo

Hi,
to switch on and off the mode go to menu- settings- main display -active standby - active standby mode - on or off.
Sorry, I cannot get the option path you mentioned. I'm using Nokia 5630 model which is based on S60 3rd Edition software. When I goto main menu->settings: there are 4 options: "General", "Phone", "Connection" and "Applications"; I goto "General", there are "Personalization", "Date and time", "Enhancement", "Security", "Factory settings", "Positioning". I goto "Personalization", there are "Display", "Standby mode", "Tone", "Themes", "Language","Voice commands". I goto "Personalization", there are "Home screen applicaitons", "Shortcuts", "Standby theme", "Notifica.light", "Email notification". I cannot find the option that allow me to change the list of applicaitons on "Home screen applications".
Pls indicate which option path that I should use.
Regards,
Toyogo.

How do I run two full screen applications on separate screens?

I have two screens for my MacBook Pro with Lion; the laptop screen and a stock screen hooked up by a VGA cable. Currently, when I use a full screen application, my second screen just changes to the grey fabric pattern. How do I run a full-screen application on each screen?

Hi Jared,
Connect/turn on the external monitor. Open System Preferences on your MBP > Displays. There should be two windows, one for the external monitor and one for the MBP. Click on the window for the external monitor. Click on the Arrangement tab. Uncheck the box for Mirror Displays. This willallow you to set each display to its own resolution. On the external display, click on the pref window for the external monitor display setting. Click on Display. Set the resolution to what you want. On the MBP's display, click on the pref window for the MBP's display and set the resolution to whatever you want. You'll be in what's called "extended desktop mode." You'll have to move the "pointer" all the way to the edge of one display to get it to go onto the other display. Open whatever you want, and drag it to the extended monitor. Set it to full screen. Open another whatever on the MBP's display and set it to full screen. You should be full screen on both displays.

USB adapter for docking port Screen hp split x2

Hi! I would like to know if there is a USB adapter to connect to the expansion port on the bottom of the screen Hp Split x2 m121sa. The USB adapter for HP Elite h n46aa pad is compatible with my HP Split x ? I thank

Hi, No. The product says: Expand what you can do with a suite of accessories designed specifically for the HP ElitePad and turn a true business tablet into a total business solution.Simply connect one end of the adapter to the HP ElitePad, and connect to your USB device on the other end. Then pack and go when you’re ready to disconnect.Get the peace of mind of a one-year limited warranty. Additional support is available (North America only) seven days a week, 24 hours a day by phone as well as through online support forums. and your machine: http://support.hp.com/us-en/product/HP-Split-13-x2-PC/5401170/model/5442928/document/c03944512/ Regards.

How many push buttons can u place on selection screen application tool bard

hi
how many push buttons can u place on selection screen application tool bar
and what is default function code for that buttons.

Hi Chaitanya,
You can place maximum 5 push buttons on Application Toolbar.
please award the points incase if you are able to get the solution.
Thanks
Sivaram

Command Button on selection screen application tool bar

Hi All,
I want to add command Button on selection screen application bar.
it is my z progarm .
please suggest one sample code .
regards,
Ajay reddy

Goto SE41, create a Status and the call it in your app.
SET PF-STATUS 'TEST'.
Greetings,
Blag.

My new Macbook Pro 13 keeps minimizing full screen applications and sending me back to the desktop. Any Help?

I can't stay in full screen applications without being returned to the desktop within 30 seconds. Is anyone else experiencing this problem or can assist
I am testing it without running any applications other than safari in full screen. It act like it is "swiping" me back to the desktop screen. I am not touching my trackpad or keyboard.
Thanks,
Corey

Do you have Google Drive installed? At the following thread at least one person had a similar issue as you: for more details please check out this thread:https://discussions.apple.com/thread/5526061?tstart=0

Full screen application on Mac Os Lion

Hi,
I am trying to develop a full screen application in AS3 / Air. This application must run on Mac Os X Lion plateform.
The fact is that when I launch the application on Lion , a start up window appear, then the application is going to full screen mode, but the launch window still appear in front of it.
This problem is for Lion only, as the application work well on Snow Leopard.
Here is the code i'am using :
Init of the app :
<s:WindowedApplication xmlns:fx="http://ns.adobe.com/mxml/2009"
                                xmlns:s="library://ns.adobe.com/flex/spark"
                                xmlns:mx="library://ns.adobe.com/flex/mx"
                                showStatusBar="false"
                                applicationComplete="init()"
                                width="100%" height="100%"
>
Public function to initiate full screen
public function init():void
     // some stuff before, nothing to bother with full screen
      this.stage.displayState = StageDisplayState.FULL_SCREEN; // fullscreen --
Any clue to bring the full screen in front or to reduce the launch window ?
regards,
Taz

Hi there, i am usign Flex SDK 4.6 with Air 3.2 release candidate on OSX Lion 10.7.3 and i still have this problem too...
I did manage to find a workaround that work only with air 3.2 :
I wait for user mouse input before setting it to fullscreen and it works.
But i still can't make it go fullscreen automatically, it will be hidden by the app window.
One thing is weird, when i compile it in flash builder, i get this bug one time in 1000 compiles, but when it is installed as an air app on , it wont work at all.. unless i use the workaround stated earlier.
Thanks

How do I get blue/green screen option & split screen?

How do I get blue/green screen option & split screen? On iMovie, these options were presented to me, whenever I dragged a clip over another clip already in timeline. Where do I find these choices in Final Cut X ? Also, on iMovie, to resume project production, I would then hit the "done" button -- Where do I find a button to finalize changes? Also , where do I find the option of "precision editor" ? Thanks

Green screen is done with the Keyer effect.
There is no Done except for transformations in the viewer.
Double click an edit point to open the Precision Editor.

Screen is 'splitting' and computer is freezing in facebook chat and Skype - any ideas?

Hello - having issues with computer freezing during facebook chat and skype - also desktop 'splits' in half - like the 'apple' that should normally be in the top left corner is 2/3rds the way to the right and the time,date etc is in the middle of the screen.
Cannot force quit or get out of the programs once it freezes.
Anyone seen this?
Thanks.

If you've applied the latest updates for your system and it's still doing it and you've maybe already gone the extra mile and reloaded the OS, then it's a hardware issue and will probably require a physical fix.
I would suggest backing up your personal data and then do an OS reload and without putting anything back on it, try it then. If it still happens, then it's hardware.

Mac Mini / 23" Display / 10.5 - Screen resolution splits in half

Hey All,
I'm using a Mac Mini with a 23" aluminum display.
Recently installed Leopard on it, and now I'm having a really funny issue:
When I try and restore a window that has been minimized to the dock, the window does restore as its supposed to, and then for a split second, the display seems to swap the left and right side of my display. It almost looks like the image slides to the side 50%. So the pieces of my screen that were at the edges of the display, temporarily meet in the middle.
It then switches immediately back.
I think this might happen at other times too, but its 100% reproducible when restoring a minimized window.
Any thoughts?
Best,
Robert

I reported the same problem in another thread before.
I also have a G4 Mini, and I also have this exact same issue with a 3rd party (Dell 24") screen. It's not related to the screen or output (happens with the DVI and analog connection) but probably a memory issue with the video chip (out of memory maybe?)
It seems to happen only at the highest resolutions (I run 1920x1200, and have also seen it happen at 1920x1080). 1680x1050 and smaller works fine.
I hope it's a bug that can be fixed, since Tiger had no problems at all.

Disable selection screen application toolbar button

Hi All,
Could you please let me know how to hide or disable application toolbar pushbuttons in the selection screen default screen 1000??
Thanks & regards,
Santhosh

Hi,
Try this way.
"Create table for function codes
DATA: it_exclude TYPE TABLE OF sy-ucomm.
PARAMETERS: r1 RADIOBUTTON GROUP gr1 USER-COMMAND uco1,
            r2 RADIOBUTTON GROUP gr1.
INITIALIZATION.
"Create two buttons with function codes FCODE1 and FCODE2.
SET PF-STATUS 'MY_GUI'.
AT SELECTION-SCREEN OUTPUT.
IF r1 = 'X'.
    APPEND 'FCODE1' TO it_exclude.
    CALL FUNCTION 'RS_SET_SELSCREEN_STATUS'
      EXPORTING
        p_status = 'MY_GUI'
      TABLES
        p_exclude = it_exclude.
ELSE.
    REFRESH it_exclude.
ENDIF.
Thanks
Venkat.O

Button on report selection screen application toolbar

Hi,
I want to place Button (application tool bar)on report(executable program) selection screen.
Need your valuable suggestions.
Thanks,
Sreedevi

hii
1. create GUI status with "Status" name and "Short text"
2. Now a screen will appear with the following,
                a. Menu Bar
                b. Application tool bar
                c. Function keys
3. Click the down arrow near the application toolbar
4. Enter the function code like SAVE, EXIT, etc., You
can also give ur own meaningful naming convention .
          For example ( ZTEST)
5. Now press enter, it will ask for "Static text" or "Dynamic Text". Choose Static text and press enter
6. Now it will ask for function text and Icon name. Specify some function text ( what it does ) and Icon name u want to attach.
7. Press enter. It will ask for function keys. Specify a function key and press enter.
8. Now u can handle this function code (ZTEST) either in PBO/PAI like IF FUNCTION = ZTEST ...ENDIF
Note:
Don't forget to set the GUI status u have created in PBO event.
Example code to set PF status.
PROCESS BEFORE OUTPUT.
MODULE liste_initialisieren.
MODULE setstatus_0100.
LOOP AT extract WITH CONTROL
tctrl_ztufi_league CURSOR nextline.
MODULE liste_show_liste.
ENDLOOP.
In the above MODULE setstatus_0100 do the following,
SET PF-STATUS 'ZGUI'. ( The GUI status u have created).
Check this:
<b>http://www.sapdevelopment.co.uk/reporting/selscr/but_appbut.htm</b>
<b>http://www.sap-basis-abap.com/abap/add-button-to-alv-toolbar-with-reuse-alv-list-display.htm
Re: How to add push buttons in out put screen of ALV
http://www.planetsap.com/Tips_and_Tricks.htm</b>
Regards
Naresh

OS X maverick - I want the swipe function to switch from one full-screen application to another, is it possible?

Hi everyone,
I just updated my mid-2010 MacBook Pro to the OS X Maverick. However, a friend of mine has Mountain Lion, and she has this really cool function that lets her swipe the keyboard to change the view from one "screen" to another, so for example she might have word open in one screen and safari in another. Can I do it in OS X Maverick as well? And if it isn't possible in Maverick, can I somehow update it so that I get the function? I've been trying to do the same with mine but it isn't working.. Really keen to get it to work as it would make life so much easier with writing essays and what not. I'm not very good with anything related to software, so forgive me if this seems like a silly question. Also, I'm not a native English speaker so my terminology might not be the best..
Cheers

Not a silly question at all.
The function is called Spaces, which lets you switch between different desktops. You can read about Spaces here: Mac 101: Using Spaces to organize your windows and applications (Mac OS X v10.5, 10.6)
If you click the symbol with the two opposite arrows, in the upper right corner of the window of an application that supports it, an app will open in full-screen mode.
Then you can configure the gestures that control Spaces in Applications > System Preferences > Trackpad > more gestures.
On my mac, for example, if I do a three finger swipe upwards, it opens Mission Control. Mission Control organizes the different desktops in Spaces. I can open a new desktop for Spaces, remove a desktop, or switch apps between desktops.
It probably doesn't make much sense when this is described in words, but if I were you I'd just jump in and experiment with it a bit. If you have more questions report back here.
Message was edited by: arthur

How to design multi screen application?

Hello Everybody,
I am building a BI application(AIR) that will run on desktop(resolution is not fixed) as well as on device like ipad and variety of mobile phones.
But I am having trouble in making its design cross resolution. Please suggest me a proper way to build the app flexible to fit to any screen.
Thanks in advance

When a user clicks in a row in the JTable, I want that the JTable
disappears and shows all the info of the row selected. Once my user
finish the edition of this row the will return to the jtable and will show
the information updated.A more common design would be to display a modal dialog with the row information and then update the table when the dialog is closed.

Screen application split

Similar Messages

Maybe you are looking for