Screen dims after a minute or so

How do you set the time it takes the screen to dim after not touching the notebook for a minute or so?

I was wondering the same exact thing. In the Energy Saver area, I have "Put the computer to sleep when it is inactive for:" set to Never, "Put the display to sleep when the computer is inactive for:" set to 1.5 hours, and "Automatically reduce the brightness of the display before display sleep" unchecked. I also have "Automatically adjust brightness as ambient light changes" unchecked in the Display settings.
Even with all these settings, the screen goes dim after about 1 minute of inactivity. Can't seem to figure out what would cause it.

Similar Messages

Screen Dims after a few minutes

My screen dims after a few minutes.It is annoying when trying to watch a news segment or DVD.I have went to the energy section and can't find anything to do with Dimming unless I am looking in the wrong section.The only thing I can find are settings adjustments for screen saver and such.
This is my fisrt Mac and I have had it for only 4 days.Yikes!!
I have only seen a couple people post on this subject.I take it that maybe there is no real solution except to take it to Apple.
`

+~ Go into System Preferences open Energy Saver choose Options. Uncheck Automatically reduce the brightness of the display before display sleep. ~+
I don't mind the dimming (except in extended viewing situations), but is the apparent battery-saving effect of the dimming preferable to the presumable wear-&-tear on the screen of the frequent brightness changes that result from having 'automatic dimming' active?
Also, is there a way to put this under real-time control so that you can switch b&f between having/not having automatic dimming without having to keep opening System Prefs. each time?
Thanks.

My screen darkens after 1 minute and turns off after 3. All of a sudden, now, after the screen shuts down, it comes right back on????

My screen darkens after 1 minute and then turn off after 3 minutes (energy saver). Now, all of a sudden, after it shuts down it comes right on???

thank you so much sir... i am very thank ful to u... it was an breath taking moment ... i was almost dead as it didnt work

Screen goes very dim after 3-minutes using Leopard

Has anyone had the same experience? I have tried all energy saving settings without success!! Its similar to the screen dimming that MBP users experience with Tiger (I could get around this by unplugging the power supply, and plugging it back in again) only with Leopard the screen goes very dark, almost to the extent that you can't see anything on the screen, and there appears to be no workaround. It takes hold without fail every time the notebook is left to sit untouched for spot on 3-minutes.
Any help would be greatly appreciated!

If it's a consistent 3 minutes to lights out I'd suspect the Energy Saver setting has got 'stuck' somehow, it might be worth trying a Parameter RAM reset - hold down apple/option/p/r keys at start up and wait for three chimes before releasing.

VZ Navigator Screen Dim after ICS update

Since the update to Android 4.0.4, the VZ Navigator application my Droid Razr Maxx is almost unusable during the day. Entering the application immediately dims the display so low that it is almost unreadable. Exiting the application immediately returns the screen back to normal.
I have disabled 'night' mode on VZ Navigator, uninstalled and reinstalled the VZ Navigator application (currently at 8.0).
Has anyone else seen this behavior?

I have the same problem after I accidentally installed ICS this afternoon. Also affected Navigator unless kept touching the screen at timeout. Called tech support--no help. Read threads then TRIED THIS TEMPORARY SOLUTION:1
1. Go to Preferences->Display->NIGHT MODE->ON.
2. Set Night Mode Brightness to 100 (slide right).
May have to take phone display off automatic and manually set brightness.
I also set screen timeout to 10 minutes for Navigator (Google) to prevent dimming until solve that one too
A few other points. VZNavigator, which was working perfectly on my Droid Razr Maxx prior to ICS, provides your speed and posted speed limits on screen. Has a better display in some ways (3D is pretty real) and has found better routes at times. My wife has a Droid Razr and now also agrees VZN has some advantages. Neither is perfect, glad to have both so when one is not working or gives bad route can switch to the other. And it's $5/ month and worth it.
When she upgraded to ICS, it caused battery drain almost visibly dropping. Full charge gone in less than an hour.
I also found some apps are SLOWER in loading on my Maxx and ICS changed my settings on email and other apps. I personally do not like the newer visuals/graphics--harder to see, some controls easier in previous version, widgets had to be reloaded after power down trying to solve dark screen problem.
Lots of things they could have fixed instead of an "a la Microsoft" let's give 'em lots of "new" features and looks (even if they don't like it). After all, we're Microsoft (substitute Verizon)--we're big, we don't have to care.
I loved the tech response (translated) "we'll get to it".

Screen dims after keyboard use

After several minutes of inaction on the keyboard, my screen will dim around 30%. A bit annoying when watching a video stream, for example. I'm assuming it's just a basic preference setting, but couldn't find it anywhere on my Mac or in the forum. Anyone know this one?

As an alternate, use the freeware utility Caffine @ http://lightheadsw.com/caffeine/ I use it on my laptop. Easier than changing the preference every time.
 Cheers, Tom

[SOLVED] GNOME starts into black screen, crashing after a minute.

This is happening after recently upgrading GNOME to 3.8 from 3.6. I attempted to downgrade, but it still refuses to start.
Here's the Xorg log.
[ 3050.246]
X.Org X Server 1.14.2
Release Date: 2013-06-25
[ 3050.246] X Protocol Version 11, Revision 0
[ 3050.246] Build Operating System: Linux 3.9.7-1-ARCH x86_64
[ 3050.246] Current Operating System: Linux dash 3.10.2-1-ARCH #1 SMP PREEMPT Mon Jul 22 08:47:24 CEST 2013 x86_64
[ 3050.246] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=5acc63bb-de83-4282-bc5e-f89b0c21e8be ro quiet
[ 3050.246] Build Date: 01 July 2013 10:48:42AM
[ 3050.246]
[ 3050.246] Current version of pixman: 0.30.0
[ 3050.247] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 3050.247] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3050.247] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul 28 14:09:23 2013
[ 3050.247] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 3050.247] (==) No Layout section. Using the first Screen section.
[ 3050.247] (==) No screen section available. Using defaults.
[ 3050.247] (**) |-->Screen "Default Screen Section" (0)
[ 3050.247] (**) | |-->Monitor "<default monitor>"
[ 3050.247] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 3050.247] (==) Automatically adding devices
[ 3050.247] (==) Automatically enabling devices
[ 3050.247] (==) Automatically adding GPU devices
[ 3050.247] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 3050.247] Entry deleted from font path.
[ 3050.247] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 3050.247] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 3050.247] Entry deleted from font path.
[ 3050.247] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 3050.247] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 3050.247] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 3050.247] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 3050.247] (II) Loader magic: 0x7fdc20
[ 3050.247] (II) Module ABI versions:
[ 3050.247] X.Org ANSI C Emulation: 0.4
[ 3050.247] X.Org Video Driver: 14.1
[ 3050.247] X.Org XInput driver : 19.1
[ 3050.247] X.Org Server Extension : 7.0
[ 3050.248] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 3050.250] (--) PCI:*(0:0:2:0) 8086:0126:17aa:21db rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00005000/64
[ 3050.250] Initializing built-in extension Generic Event Extension
[ 3050.250] Initializing built-in extension SHAPE
[ 3050.250] Initializing built-in extension MIT-SHM
[ 3050.250] Initializing built-in extension XInputExtension
[ 3050.250] Initializing built-in extension XTEST
[ 3050.250] Initializing built-in extension BIG-REQUESTS
[ 3050.250] Initializing built-in extension SYNC
[ 3050.250] Initializing built-in extension XKEYBOARD
[ 3050.250] Initializing built-in extension XC-MISC
[ 3050.250] Initializing built-in extension SECURITY
[ 3050.250] Initializing built-in extension XINERAMA
[ 3050.250] Initializing built-in extension XFIXES
[ 3050.250] Initializing built-in extension RENDER
[ 3050.250] Initializing built-in extension RANDR
[ 3050.250] Initializing built-in extension COMPOSITE
[ 3050.250] Initializing built-in extension DAMAGE
[ 3050.250] Initializing built-in extension MIT-SCREEN-SAVER
[ 3050.250] Initializing built-in extension DOUBLE-BUFFER
[ 3050.250] Initializing built-in extension RECORD
[ 3050.250] Initializing built-in extension DPMS
[ 3050.250] Initializing built-in extension X-Resource
[ 3050.250] Initializing built-in extension XVideo
[ 3050.251] Initializing built-in extension XVideo-MotionCompensation
[ 3050.252] Initializing built-in extension XFree86-VidModeExtension
[ 3050.253] Initializing built-in extension XFree86-DGA
[ 3050.253] Initializing built-in extension XFree86-DRI
[ 3050.254] Initializing built-in extension DRI2
[ 3050.254] (II) LoadModule: "glx"
[ 3050.254] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 3050.254] (II) Module glx: vendor="X.Org Foundation"
[ 3050.254] compiled for 1.14.2, module version = 1.0.0
[ 3050.254] ABI class: X.Org Server Extension, version 7.0
[ 3050.254] (==) AIGLX enabled
[ 3050.255] Loading extension GLX
[ 3050.255] (==) Matched intel as autoconfigured driver 0
[ 3050.255] (==) Matched intel as autoconfigured driver 1
[ 3050.255] (==) Matched vesa as autoconfigured driver 2
[ 3050.255] (==) Matched modesetting as autoconfigured driver 3
[ 3050.255] (==) Matched fbdev as autoconfigured driver 4
[ 3050.255] (==) Assigned the driver to the xf86ConfigLayout
[ 3050.255] (II) LoadModule: "intel"
[ 3050.255] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 3050.255] (II) Module intel: vendor="X.Org Foundation"
[ 3050.255] compiled for 1.14.2, module version = 2.21.12
[ 3050.255] Module class: X.Org Video Driver
[ 3050.255] ABI class: X.Org Video Driver, version 14.1
[ 3050.255] (II) LoadModule: "vesa"
[ 3050.256] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 3050.256] (II) Module vesa: vendor="X.Org Foundation"
[ 3050.256] compiled for 1.14.0, module version = 2.3.2
[ 3050.256] Module class: X.Org Video Driver
[ 3050.256] ABI class: X.Org Video Driver, version 14.1
[ 3050.256] (II) LoadModule: "modesetting"
[ 3050.256] (WW) Warning, couldn't open module modesetting
[ 3050.256] (II) UnloadModule: "modesetting"
[ 3050.256] (II) Unloading modesetting
[ 3050.256] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 3050.256] (II) LoadModule: "fbdev"
[ 3050.256] (WW) Warning, couldn't open module fbdev
[ 3050.256] (II) UnloadModule: "fbdev"
[ 3050.256] (II) Unloading fbdev
[ 3050.256] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 3050.256] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), HD Graphics, HD Graphics 4600,
Haswell Desktop (GT3), HD Graphics, HD Graphics 4600,
Haswell Mobile (GT3), HD Graphics, HD Graphics P4600/P4700,
Haswell Server (GT3), Haswell (GT1), Haswell (GT2), Haswell (GT3),
HD Graphics, Haswell (GT2), Haswell (GT3), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT3),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT3), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4400,
HD Graphics 5000, Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Iris(TM) Graphics 5100, Haswell ULT (GT1), Haswell ULT (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4200,
Iris(TM) Graphics 5100, Haswell CRW Desktop (GT1), HD Graphics 4600,
Iris(TM) Pro Graphics 5200, Haswell CRW Mobile (GT1),
HD Graphics 4600, Iris(TM) Pro Graphics 5200,
Haswell CRW Server (GT1), Haswell CRW Server (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, ValleyView PO board
[ 3050.257] (II) VESA: driver for VESA chipsets: vesa
[ 3050.257] (++) using VT number 3
[ 3050.257] (WW) Falling back to old probe method for vesa
[ 3050.257] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 3050.257] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 3050.257] (==) intel(0): RGB weight 888
[ 3050.257] (==) intel(0): Default visual is TrueColor
[ 3050.257] (--) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2+)
[ 3050.257] (**) intel(0): Relaxed fencing enabled
[ 3050.257] (**) intel(0): Wait on SwapBuffers? enabled
[ 3050.257] (**) intel(0): Triple buffering? enabled
[ 3050.257] (**) intel(0): Framebuffer tiled
[ 3050.257] (**) intel(0): Pixmaps tiled
[ 3050.257] (**) intel(0): 3D buffers tiled
[ 3050.257] (**) intel(0): SwapBuffers wait enabled
[ 3050.257] (==) intel(0): video overlay key set to 0x101fe
[ 3050.257] (II) intel(0): Output LVDS1 has no monitor section
[ 3050.257] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 3050.259] (II) intel(0): Output VGA1 has no monitor section
[ 3050.283] (II) intel(0): Output HDMI1 has no monitor section
[ 3050.283] (II) intel(0): Output DP1 has no monitor section
[ 3050.283] (II) intel(0): Output HDMI2 has no monitor section
[ 3050.283] (II) intel(0): Output HDMI3 has no monitor section
[ 3050.284] (II) intel(0): Output DP2 has no monitor section
[ 3050.284] (II) intel(0): Output DP3 has no monitor section
[ 3050.284] (II) intel(0): EDID for output LVDS1
[ 3050.284] (II) intel(0): Manufacturer: LGD Model: 2d8 Serial#: 0
[ 3050.284] (II) intel(0): Year: 2012 Week: 0
[ 3050.284] (II) intel(0): EDID Version: 1.3
[ 3050.284] (II) intel(0): Digital Display Input
[ 3050.284] (II) intel(0): Max Image Size [cm]: horiz.: 28 vert.: 16
[ 3050.284] (II) intel(0): Gamma: 2.20
[ 3050.284] (II) intel(0): DPMS capabilities: StandBy Suspend Off
[ 3050.284] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 3050.284] (II) intel(0): First detailed timing is preferred mode
[ 3050.284] (II) intel(0): redX: 0.600 redY: 0.355 greenX: 0.334 greenY: 0.559
[ 3050.284] (II) intel(0): blueX: 0.149 blueY: 0.114 whiteX: 0.313 whiteY: 0.329
[ 3050.284] (II) intel(0): Manufacturer's mask: 0
[ 3050.284] (II) intel(0): Supported detailed timing:
[ 3050.284] (II) intel(0): clock: 75.2 MHz Image Size: 277 x 156 mm
[ 3050.284] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1478 h_blank_end 1582 h_border: 0
[ 3050.284] (II) intel(0): v_active: 768 v_sync: 772 v_sync_end 779 v_blanking: 792 v_border: 0
[ 3050.284] (II) intel(0): LG Display
[ 3050.284] (II) intel(0): LP125WH2-SLB3
[ 3050.284] (II) intel(0): EDID (in hex):
[ 3050.284] (II) intel(0): 00ffffffffffff0030e4d80200000000
[ 3050.284] (II) intel(0): 00160103801c1078ea8855995b558f26
[ 3050.284] (II) intel(0): 1d505400000001010101010101010101
[ 3050.284] (II) intel(0): 010101010101601d56d8500018303040
[ 3050.284] (II) intel(0): 4700159c1000001b0000000000000000
[ 3050.284] (II) intel(0): 00000000000000000000000000fe004c
[ 3050.284] (II) intel(0): 4720446973706c61790a2020000000fe
[ 3050.284] (II) intel(0): 004c503132355748322d534c42330059
[ 3050.284] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 3050.284] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 3050.284] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 3050.284] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 3050.284] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 3050.284] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 3050.284] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 3050.284] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 3050.284] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 3050.284] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 3050.284] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 3050.284] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 3050.284] (II) intel(0): Printing probed modes for output LVDS1
[ 3050.284] (II) intel(0): Modeline "1366x768"x60.0 75.20 1366 1414 1478 1582 768 772 779 792 +hsync -vsync (47.5 kHz eP)
[ 3050.284] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 3050.284] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 3050.284] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 3050.284] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 3050.285] (II) intel(0): EDID for output VGA1
[ 3050.309] (II) intel(0): EDID for output HDMI1
[ 3050.309] (II) intel(0): EDID for output DP1
[ 3050.310] (II) intel(0): EDID for output HDMI2
[ 3050.310] (II) intel(0): EDID for output HDMI3
[ 3050.310] (II) intel(0): EDID for output DP2
[ 3050.310] (II) intel(0): EDID for output DP3
[ 3050.310] (II) intel(0): Output LVDS1 connected
[ 3050.310] (II) intel(0): Output VGA1 disconnected
[ 3050.310] (II) intel(0): Output HDMI1 disconnected
[ 3050.310] (II) intel(0): Output DP1 disconnected
[ 3050.310] (II) intel(0): Output HDMI2 disconnected
[ 3050.310] (II) intel(0): Output HDMI3 disconnected
[ 3050.310] (II) intel(0): Output DP2 disconnected
[ 3050.310] (II) intel(0): Output DP3 disconnected
[ 3050.310] (II) intel(0): Using exact sizes for initial modes
[ 3050.310] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 3050.310] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 3050.310] (II) intel(0): Kernel page flipping support detected, enabling
[ 3050.310] (==) intel(0): DPI set to (96, 96)
[ 3050.310] (II) Loading sub module "fb"
[ 3050.310] (II) LoadModule: "fb"
[ 3050.310] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 3050.310] (II) Module fb: vendor="X.Org Foundation"
[ 3050.310] compiled for 1.14.2, module version = 1.0.0
[ 3050.310] ABI class: X.Org ANSI C Emulation, version 0.4
[ 3050.310] (II) Loading sub module "dri2"
[ 3050.310] (II) LoadModule: "dri2"
[ 3050.310] (II) Module "dri2" already built-in
[ 3050.310] (II) UnloadModule: "vesa"
[ 3050.310] (II) Unloading vesa
[ 3050.310] (==) Depth 24 pixmap format is 32 bpp
[ 3050.310] (II) intel(0): [DRI2] Setup complete
[ 3050.310] (II) intel(0): [DRI2] DRI driver: i965
[ 3050.310] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[ 3050.311] (II) UXA(0): Driver registered support for the following operations:
[ 3050.311] (II) solid
[ 3050.311] (II) copy
[ 3050.311] (II) composite (RENDER acceleration)
[ 3050.311] (II) put_image
[ 3050.311] (II) get_image
[ 3050.311] (==) intel(0): Backing store disabled
[ 3050.311] (==) intel(0): Silken mouse enabled
[ 3050.311] (II) intel(0): Initializing HW Cursor
[ 3050.311] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 3050.312] (==) intel(0): DPMS enabled
[ 3050.312] (==) intel(0): Intel XvMC decoder enabled
[ 3050.312] (II) intel(0): Set up textured video
[ 3050.312] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 3050.312] (II) intel(0): direct rendering: DRI2 Enabled
[ 3050.312] (==) intel(0): hotplug detection: "enabled"
[ 3050.336] (--) RandR disabled
[ 3050.346] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 3050.346] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 3050.346] (II) AIGLX: enabled GLX_ARB_create_context
[ 3050.346] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 3050.346] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 3050.346] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 3050.346] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 3050.346] (II) AIGLX: Loaded and initialized i965
[ 3050.346] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 3050.346] (II) intel(0): Setting screen physical size to 361 x 203
[ 3050.373] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 3050.373] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 3050.373] (II) LoadModule: "evdev"
[ 3050.373] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 3050.373] (II) Module evdev: vendor="X.Org Foundation"
[ 3050.373] compiled for 1.14.2, module version = 2.8.1
[ 3050.373] Module class: X.Org XInput Driver
[ 3050.373] ABI class: X.Org XInput driver, version 19.1
[ 3050.373] (II) Using input driver 'evdev' for 'Power Button'
[ 3050.373] (**) Power Button: always reports core events
[ 3050.373] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 3050.373] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 3050.373] (--) evdev: Power Button: Found keys
[ 3050.373] (II) evdev: Power Button: Configuring as keyboard
[ 3050.373] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 3050.373] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 3050.373] (**) Option "xkb_rules" "evdev"
[ 3050.373] (**) Option "xkb_model" "pc104"
[ 3050.373] (**) Option "xkb_layout" "us"
[ 3050.389] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 3050.389] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 3050.389] (II) Using input driver 'evdev' for 'Video Bus'
[ 3050.389] (**) Video Bus: always reports core events
[ 3050.389] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 3050.389] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 3050.389] (--) evdev: Video Bus: Found keys
[ 3050.389] (II) evdev: Video Bus: Configuring as keyboard
[ 3050.389] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
[ 3050.389] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 3050.389] (**) Option "xkb_rules" "evdev"
[ 3050.389] (**) Option "xkb_model" "pc104"
[ 3050.389] (**) Option "xkb_layout" "us"
[ 3050.390] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 3050.390] (II) No input driver specified, ignoring this device.
[ 3050.390] (II) This device may have been added with another device file.
[ 3050.390] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 3050.390] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 3050.390] (II) Using input driver 'evdev' for 'Sleep Button'
[ 3050.390] (**) Sleep Button: always reports core events
[ 3050.390] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 3050.390] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 3050.390] (--) evdev: Sleep Button: Found keys
[ 3050.390] (II) evdev: Sleep Button: Configuring as keyboard
[ 3050.390] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[ 3050.390] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 3050.390] (**) Option "xkb_rules" "evdev"
[ 3050.390] (**) Option "xkb_model" "pc104"
[ 3050.390] (**) Option "xkb_layout" "us"
[ 3050.390] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 3050.390] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 3050.390] (II) No input driver specified, ignoring this device.
[ 3050.390] (II) This device may have been added with another device file.
[ 3050.390] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[ 3050.390] (II) No input driver specified, ignoring this device.
[ 3050.390] (II) This device may have been added with another device file.
[ 3050.391] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event8)
[ 3050.391] (II) No input driver specified, ignoring this device.
[ 3050.391] (II) This device may have been added with another device file.
[ 3050.391] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event9)
[ 3050.391] (II) No input driver specified, ignoring this device.
[ 3050.391] (II) This device may have been added with another device file.
[ 3050.391] (II) config/udev: Adding input device Wacom ISDv4 E6 Pen (/dev/input/event12)
[ 3050.391] (**) Wacom ISDv4 E6 Pen: Applying InputClass "evdev tablet catchall"
[ 3050.391] (II) Using input driver 'evdev' for 'Wacom ISDv4 E6 Pen'
[ 3050.391] (**) Wacom ISDv4 E6 Pen: always reports core events
[ 3050.391] (**) evdev: Wacom ISDv4 E6 Pen: Device: "/dev/input/event12"
[ 3050.391] (--) evdev: Wacom ISDv4 E6 Pen: Vendor 0x56a Product 0xe6
[ 3050.391] (--) evdev: Wacom ISDv4 E6 Pen: Found absolute axes
[ 3050.391] (--) evdev: Wacom ISDv4 E6 Pen: Found x and y absolute axes
[ 3050.391] (--) evdev: Wacom ISDv4 E6 Pen: Found absolute tablet.
[ 3050.391] (II) evdev: Wacom ISDv4 E6 Pen: Configuring as tablet
[ 3050.391] (**) evdev: Wacom ISDv4 E6 Pen: YAxisMapping: buttons 4 and 5
[ 3050.391] (**) evdev: Wacom ISDv4 E6 Pen: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 3050.391] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input12/event12"
[ 3050.391] (II) XINPUT: Adding extended input device "Wacom ISDv4 E6 Pen" (type: TABLET, id 9)
[ 3050.391] (II) evdev: Wacom ISDv4 E6 Pen: initialized for absolute axes.
[ 3050.391] (**) Wacom ISDv4 E6 Pen: (accel) keeping acceleration scheme 1
[ 3050.391] (**) Wacom ISDv4 E6 Pen: (accel) acceleration profile 0
[ 3050.391] (**) Wacom ISDv4 E6 Pen: (accel) acceleration factor: 2.000
[ 3050.391] (**) Wacom ISDv4 E6 Pen: (accel) acceleration threshold: 4
[ 3050.391] (II) config/udev: Adding input device Wacom ISDv4 E6 Pen (/dev/input/mouse1)
[ 3050.391] (II) No input driver specified, ignoring this device.
[ 3050.391] (II) This device may have been added with another device file.
[ 3050.392] (II) config/udev: Adding input device Wacom ISDv4 E6 Finger (/dev/input/event13)
[ 3050.392] (**) Wacom ISDv4 E6 Finger: Applying InputClass "evdev touchscreen catchall"
[ 3050.392] (II) Using input driver 'evdev' for 'Wacom ISDv4 E6 Finger'
[ 3050.392] (**) Wacom ISDv4 E6 Finger: always reports core events
[ 3050.392] (**) evdev: Wacom ISDv4 E6 Finger: Device: "/dev/input/event13"
[ 3050.392] (II) evdev: Wacom ISDv4 E6 Finger: Using mtdev for this device
[ 3050.392] (--) evdev: Wacom ISDv4 E6 Finger: Vendor 0x56a Product 0xe6
[ 3050.392] (--) evdev: Wacom ISDv4 E6 Finger: Found absolute axes
[ 3050.392] (--) evdev: Wacom ISDv4 E6 Finger: Found absolute multitouch axes
[ 3050.392] (II) evdev: Wacom ISDv4 E6 Finger: No buttons found, faking one.
[ 3050.392] (--) evdev: Wacom ISDv4 E6 Finger: Found x and y absolute axes
[ 3050.392] (--) evdev: Wacom ISDv4 E6 Finger: Found absolute touchscreen
[ 3050.392] (II) evdev: Wacom ISDv4 E6 Finger: Configuring as touchscreen
[ 3050.392] (**) evdev: Wacom ISDv4 E6 Finger: YAxisMapping: buttons 4 and 5
[ 3050.392] (**) evdev: Wacom ISDv4 E6 Finger: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 3050.392] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/input/input13/event13"
[ 3050.392] (II) XINPUT: Adding extended input device "Wacom ISDv4 E6 Finger" (type: TOUCHSCREEN, id 10)
[ 3050.392] (II) evdev: Wacom ISDv4 E6 Finger: initialized for absolute axes.
[ 3050.392] (**) Wacom ISDv4 E6 Finger: (accel) keeping acceleration scheme 1
[ 3050.392] (**) Wacom ISDv4 E6 Finger: (accel) acceleration profile 0
[ 3050.392] (**) Wacom ISDv4 E6 Finger: (accel) acceleration factor: 2.000
[ 3050.392] (**) Wacom ISDv4 E6 Finger: (accel) acceleration threshold: 4
[ 3050.392] (II) config/udev: Adding input device Wacom ISDv4 E6 Finger (/dev/input/mouse2)
[ 3050.392] (II) No input driver specified, ignoring this device.
[ 3050.392] (II) This device may have been added with another device file.
[ 3050.392] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 3050.392] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 3050.392] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 3050.392] (**) AT Translated Set 2 keyboard: always reports core events
[ 3050.392] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 3050.392] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 3050.392] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 3050.392] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 3050.392] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 3050.392] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 3050.392] (**) Option "xkb_rules" "evdev"
[ 3050.392] (**) Option "xkb_model" "pc104"
[ 3050.392] (**) Option "xkb_layout" "us"
[ 3050.393] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
[ 3050.393] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 3050.393] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 3050.393] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 3050.393] (II) LoadModule: "synaptics"
[ 3050.393] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 3050.393] (II) Module synaptics: vendor="X.Org Foundation"
[ 3050.393] compiled for 1.14.1, module version = 1.7.1
[ 3050.393] Module class: X.Org XInput Driver
[ 3050.393] ABI class: X.Org XInput driver, version 19.1
[ 3050.393] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 3050.393] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 3050.393] (**) Option "Device" "/dev/input/event11"
[ 3050.483] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 3050.483] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (res 75)
[ 3050.483] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (res 129)
[ 3050.483] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 3050.483] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 3050.483] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 3050.483] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 3050.483] (**) Option "TapButton1" "1"
[ 3050.483] (**) Option "TapButton2" "2"
[ 3050.483] (**) Option "TapButton3" "3"
[ 3050.483] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 3050.483] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 3050.483] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 3050.523] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event11"
[ 3050.523] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[ 3050.523] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 3050.523] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 3050.523] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040
[ 3050.523] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 3050.523] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 3050.523] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 3050.523] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 3050.523] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 3050.523] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 3050.523] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 3050.523] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event14)
[ 3050.524] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 3050.524] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 3050.524] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 3050.524] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event14"
[ 3050.524] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[ 3050.524] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 3050.524] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[ 3050.524] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 3050.524] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[ 3050.524] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 3050.524] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 3050.524] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input14/event14"
[ 3050.524] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 13)
[ 3050.524] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 3050.524] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 3050.524] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 3050.524] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 3050.524] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 3050.524] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse3)
[ 3050.524] (II) No input driver specified, ignoring this device.
[ 3050.524] (II) This device may have been added with another device file.
[ 3050.524] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 3050.524] (II) No input driver specified, ignoring this device.
[ 3050.524] (II) This device may have been added with another device file.
[ 3050.524] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event5)
[ 3050.524] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 3050.524] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[ 3050.524] (**) ThinkPad Extra Buttons: always reports core events
[ 3050.524] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event5"
[ 3050.524] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
[ 3050.524] (--) evdev: ThinkPad Extra Buttons: Found keys
[ 3050.524] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[ 3050.524] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input5/event5"
[ 3050.524] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 14)
[ 3050.524] (**) Option "xkb_rules" "evdev"
[ 3050.524] (**) Option "xkb_model" "pc104"
[ 3050.524] (**) Option "xkb_layout" "us"
[ 3050.673] (II) intel(0): EDID vendor "LGD", prod id 728
[ 3050.673] (II) intel(0): Printing DDC gathered Modelines:
[ 3050.673] (II) intel(0): Modeline "1366x768"x0.0 75.20 1366 1414 1478 1582 768 772 779 792 +hsync -vsync (47.5 kHz eP)
[ 3053.746] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 3057.566] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 3057.576] (II) intel(0): EDID vendor "LGD", prod id 728
[ 3057.576] (II) intel(0): Printing DDC gathered Modelines:
[ 3057.576] (II) intel(0): Modeline "1366x768"x0.0 75.20 1366 1414 1478 1582 768 772 779 792 +hsync -vsync (47.5 kHz eP)
[ 3057.604] (II) evdev: Wacom ISDv4 E6 Finger: Using mtdev for this device
[ 3057.604] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 3057.604] setversion 1.4 failed
[ 3059.233] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 3145.715] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 3145.719] (II) intel(0): EDID vendor "LGD", prod id 728
[ 3145.719] (II) intel(0): Printing DDC gathered Modelines:
[ 3145.719] (II) intel(0): Modeline "1366x768"x0.0 75.20 1366 1414 1478 1582 768 772 779 792 +hsync -vsync (47.5 kHz eP)
[ 3145.747] (II) evdev: Wacom ISDv4 E6 Finger: Using mtdev for this device
[ 3145.747] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 3148.360] (II) evdev: ThinkPad Extra Buttons: Close
[ 3148.360] (II) UnloadModule: "evdev"
[ 3148.360] (II) evdev: TPPS/2 IBM TrackPoint: Close
[ 3148.360] (II) UnloadModule: "evdev"
[ 3148.360] (II) UnloadModule: "synaptics"
[ 3148.360] (II) evdev: AT Translated Set 2 keyboard: Close
[ 3148.360] (II) UnloadModule: "evdev"
[ 3148.360] (II) evdev: Wacom ISDv4 E6 Finger: Close
[ 3148.360] (II) UnloadModule: "evdev"
[ 3148.360] (II) evdev: Wacom ISDv4 E6 Pen: Close
[ 3148.360] (II) UnloadModule: "evdev"
[ 3148.360] (II) evdev: Sleep Button: Close
[ 3148.360] (II) UnloadModule: "evdev"
[ 3148.360] (II) evdev: Video Bus: Close
[ 3148.360] (II) UnloadModule: "evdev"
[ 3148.360] (II) evdev: Power Button: Close
[ 3148.360] (II) UnloadModule: "evdev"
[ 3149.198] (EE) Server terminated successfully (0). Closing log file.
I'd appreciate any help I could get.
Last edited by erdi13 (2013-07-30 03:49:12)

I tried entering GNOME with gdm.
Before gdm runs, it freezes at a black screen for about a minute, then flashes the "Oh No" screen. Afterward, it allows me to login. After logging in, it freezes on the grey background of gdm for another minute. Once it displays the "Oh No" screen, it takes me back to a black screen, repeating the cycle.
Also, I upgraded X11 at the same time as GNOME.
Edit: Here's a recent Xorg log, if it helps.
[ 23.867]
X.Org X Server 1.14.2
Release Date: 2013-06-25
[ 23.868] X Protocol Version 11, Revision 0
[ 23.868] Build Operating System: Linux 3.9.7-1-ARCH x86_64
[ 23.869] Current Operating System: Linux dash 3.10.2-1-ARCH #1 SMP PREEMPT Mon Jul 22 08:47:24 CEST 2013 x86_64
[ 23.869] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=5acc63bb-de83-4282-bc5e-f89b0c21e8be ro quiet
[ 23.870] Build Date: 01 July 2013 10:48:42AM
[ 23.870]
[ 23.871] Current version of pixman: 0.30.0
[ 23.872] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 23.872] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 23.874] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 29 16:06:24 2013
[ 23.876] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 23.878] (==) No Layout section. Using the first Screen section.
[ 23.878] (==) No screen section available. Using defaults.
[ 23.878] (**) |-->Screen "Default Screen Section" (0)
[ 23.878] (**) | |-->Monitor "<default monitor>"
[ 23.878] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 23.878] (**) | |-->Device "Intel Graphics"
[ 23.878] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 23.878] (==) Automatically adding devices
[ 23.878] (==) Automatically enabling devices
[ 23.878] (==) Automatically adding GPU devices
[ 23.885] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 23.886] Entry deleted from font path.
[ 23.886] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 23.886] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 23.886] Entry deleted from font path.
[ 23.886] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 23.886] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 23.886] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 23.886] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 23.886] (II) Loader magic: 0x7fdc20
[ 23.886] (II) Module ABI versions:
[ 23.886] X.Org ANSI C Emulation: 0.4
[ 23.886] X.Org Video Driver: 14.1
[ 23.886] X.Org XInput driver : 19.1
[ 23.886] X.Org Server Extension : 7.0
[ 23.886] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 23.888] (--) PCI:*(0:0:2:0) 8086:0126:17aa:21db rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00005000/64
[ 23.889] Initializing built-in extension Generic Event Extension
[ 23.890] Initializing built-in extension SHAPE
[ 23.890] Initializing built-in extension MIT-SHM
[ 23.891] Initializing built-in extension XInputExtension
[ 23.891] Initializing built-in extension XTEST
[ 23.892] Initializing built-in extension BIG-REQUESTS
[ 23.893] Initializing built-in extension SYNC
[ 23.893] Initializing built-in extension XKEYBOARD
[ 23.894] Initializing built-in extension XC-MISC
[ 23.895] Initializing built-in extension SECURITY
[ 23.895] Initializing built-in extension XINERAMA
[ 23.896] Initializing built-in extension XFIXES
[ 23.896] Initializing built-in extension RENDER
[ 23.897] Initializing built-in extension RANDR
[ 23.897] Initializing built-in extension COMPOSITE
[ 23.898] Initializing built-in extension DAMAGE
[ 23.899] Initializing built-in extension MIT-SCREEN-SAVER
[ 23.899] Initializing built-in extension DOUBLE-BUFFER
[ 23.900] Initializing built-in extension RECORD
[ 23.900] Initializing built-in extension DPMS
[ 23.901] Initializing built-in extension X-Resource
[ 23.901] Initializing built-in extension XVideo
[ 23.902] Initializing built-in extension XVideo-MotionCompensation
[ 23.903] Initializing built-in extension XFree86-VidModeExtension
[ 23.903] Initializing built-in extension XFree86-DGA
[ 23.904] Initializing built-in extension XFree86-DRI
[ 23.904] Initializing built-in extension DRI2
[ 23.904] (II) LoadModule: "glx"
[ 23.905] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 23.909] (II) Module glx: vendor="X.Org Foundation"
[ 23.909] compiled for 1.14.2, module version = 1.0.0
[ 23.909] ABI class: X.Org Server Extension, version 7.0
[ 23.909] (==) AIGLX enabled
[ 23.910] Loading extension GLX
[ 23.910] (II) LoadModule: "intel"
[ 23.910] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 23.916] (II) Module intel: vendor="X.Org Foundation"
[ 23.916] compiled for 1.14.2, module version = 2.21.12
[ 23.916] Module class: X.Org Video Driver
[ 23.916] ABI class: X.Org Video Driver, version 14.1
[ 23.916] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), HD Graphics, HD Graphics 4600,
Haswell Desktop (GT3), HD Graphics, HD Graphics 4600,
Haswell Mobile (GT3), HD Graphics, HD Graphics P4600/P4700,
Haswell Server (GT3), Haswell (GT1), Haswell (GT2), Haswell (GT3),
HD Graphics, Haswell (GT2), Haswell (GT3), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT3),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT3), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4400,
HD Graphics 5000, Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Iris(TM) Graphics 5100, Haswell ULT (GT1), Haswell ULT (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4200,
Iris(TM) Graphics 5100, Haswell CRW Desktop (GT1), HD Graphics 4600,
Iris(TM) Pro Graphics 5200, Haswell CRW Mobile (GT1),
HD Graphics 4600, Iris(TM) Pro Graphics 5200,
Haswell CRW Server (GT1), Haswell CRW Server (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, ValleyView PO board
[ 23.917] (++) using VT number 1
[ 23.920] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 23.920] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 23.920] (==) intel(0): RGB weight 888
[ 23.920] (==) intel(0): Default visual is TrueColor
[ 23.920] (**) intel(0): Option "AccelMethod" "sna"
[ 23.920] (--) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2+)
[ 23.920] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[ 23.920] (**) intel(0): Framebuffer tiled
[ 23.920] (**) intel(0): Pixmaps tiled
[ 23.920] (**) intel(0): "Tear free" disabled
[ 23.920] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 23.920] (II) intel(0): Output LVDS1 has no monitor section
[ 23.920] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[ 23.920] (II) intel(0): Output VGA1 has no monitor section
[ 23.920] (II) intel(0): Output HDMI1 has no monitor section
[ 23.920] (II) intel(0): Output DP1 has no monitor section
[ 23.920] (II) intel(0): Output HDMI2 has no monitor section
[ 23.920] (II) intel(0): Output HDMI3 has no monitor section
[ 23.920] (II) intel(0): Output DP2 has no monitor section
[ 23.920] (II) intel(0): Output DP3 has no monitor section
[ 23.920] (II) intel(0): Output LVDS1 using initial mode 1366x768 on pipe 0
[ 23.920] (==) intel(0): DPI set to (96, 96)
[ 23.920] (II) Loading sub module "dri2"
[ 23.920] (II) LoadModule: "dri2"
[ 23.920] (II) Module "dri2" already built-in
[ 23.920] (==) Depth 24 pixmap format is 32 bpp
[ 23.926] (II) intel(0): SNA initialized with Sandybridge (gen6, gt2) backend
[ 23.926] (==) intel(0): Backing store disabled
[ 23.926] (==) intel(0): Silken mouse enabled
[ 23.926] (II) intel(0): HW Cursor enabled
[ 23.926] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 23.928] (==) intel(0): DPMS enabled
[ 23.928] (II) intel(0): [DRI2] Setup complete
[ 23.928] (II) intel(0): [DRI2] DRI driver: i965
[ 23.928] (II) intel(0): direct rendering: DRI2 Enabled
[ 23.928] (==) intel(0): hotplug detection: "enabled"
[ 23.929] (--) RandR disabled
[ 23.956] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 23.956] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 23.956] (II) AIGLX: enabled GLX_ARB_create_context
[ 23.956] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 23.956] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 23.956] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 23.956] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 23.956] (II) AIGLX: Loaded and initialized i965
[ 23.956] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 23.958] (II) intel(0): switch to mode 1366x768 on pipe 0 using LVDS1
[ 23.980] (II) intel(0): Setting screen physical size to 361 x 203
[ 24.028] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 24.028] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 24.028] (II) LoadModule: "evdev"
[ 24.028] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 24.031] (II) Module evdev: vendor="X.Org Foundation"
[ 24.031] compiled for 1.14.2, module version = 2.8.1
[ 24.031] Module class: X.Org XInput Driver
[ 24.031] ABI class: X.Org XInput driver, version 19.1
[ 24.031] (II) Using input driver 'evdev' for 'Power Button'
[ 24.031] (**) Power Button: always reports core events
[ 24.031] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 24.031] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 24.031] (--) evdev: Power Button: Found keys
[ 24.031] (II) evdev: Power Button: Configuring as keyboard
[ 24.031] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 24.031] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 24.031] (**) Option "xkb_rules" "evdev"
[ 24.031] (**) Option "xkb_model" "pc104"
[ 24.031] (**) Option "xkb_layout" "us"
[ 24.045] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 24.045] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 24.045] (II) Using input driver 'evdev' for 'Video Bus'
[ 24.045] (**) Video Bus: always reports core events
[ 24.045] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 24.045] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 24.045] (--) evdev: Video Bus: Found keys
[ 24.045] (II) evdev: Video Bus: Configuring as keyboard
[ 24.045] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
[ 24.045] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 24.045] (**) Option "xkb_rules" "evdev"
[ 24.045] (**) Option "xkb_model" "pc104"
[ 24.045] (**) Option "xkb_layout" "us"
[ 24.046] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 24.046] (II) No input driver specified, ignoring this device.
[ 24.046] (II) This device may have been added with another device file.
[ 24.046] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 24.046] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 24.046] (II) Using input driver 'evdev' for 'Sleep Button'
[ 24.046] (**) Sleep Button: always reports core events
[ 24.046] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 24.046] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 24.046] (--) evdev: Sleep Button: Found keys
[ 24.046] (II) evdev: Sleep Button: Configuring as keyboard
[ 24.046] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[ 24.046] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 24.046] (**) Option "xkb_rules" "evdev"
[ 24.046] (**) Option "xkb_model" "pc104"
[ 24.046] (**) Option "xkb_layout" "us"
[ 24.046] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 24.046] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 24.046] (II) No input driver specified, ignoring this device.
[ 24.046] (II) This device may have been added with another device file.
[ 24.046] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[ 24.046] (II) No input driver specified, ignoring this device.
[ 24.046] (II) This device may have been added with another device file.
[ 24.047] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event8)
[ 24.047] (II) No input driver specified, ignoring this device.
[ 24.047] (II) This device may have been added with another device file.
[ 24.047] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event9)
[ 24.047] (II) No input driver specified, ignoring this device.
[ 24.047] (II) This device may have been added with another device file.
[ 24.047] (II) config/udev: Adding input device Wacom ISDv4 E6 Pen (/dev/input/event12)
[ 24.047] (**) Wacom ISDv4 E6 Pen: Applying InputClass "evdev tablet catchall"
[ 24.047] (II) Using input driver 'evdev' for 'Wacom ISDv4 E6 Pen'
[ 24.047] (**) Wacom ISDv4 E6 Pen: always reports core events
[ 24.047] (**) evdev: Wacom ISDv4 E6 Pen: Device: "/dev/input/event12"
[ 24.047] (--) evdev: Wacom ISDv4 E6 Pen: Vendor 0x56a Product 0xe6
[ 24.047] (--) evdev: Wacom ISDv4 E6 Pen: Found absolute axes
[ 24.047] (--) evdev: Wacom ISDv4 E6 Pen: Found x and y absolute axes
[ 24.047] (--) evdev: Wacom ISDv4 E6 Pen: Found absolute tablet.
[ 24.047] (II) evdev: Wacom ISDv4 E6 Pen: Configuring as tablet
[ 24.047] (**) evdev: Wacom ISDv4 E6 Pen: YAxisMapping: buttons 4 and 5
[ 24.047] (**) evdev: Wacom ISDv4 E6 Pen: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 24.047] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input12/event12"
[ 24.047] (II) XINPUT: Adding extended input device "Wacom ISDv4 E6 Pen" (type: TABLET, id 9)
[ 24.047] (II) evdev: Wacom ISDv4 E6 Pen: initialized for absolute axes.
[ 24.047] (**) Wacom ISDv4 E6 Pen: (accel) keeping acceleration scheme 1
[ 24.047] (**) Wacom ISDv4 E6 Pen: (accel) acceleration profile 0
[ 24.047] (**) Wacom ISDv4 E6 Pen: (accel) acceleration factor: 2.000
[ 24.047] (**) Wacom ISDv4 E6 Pen: (accel) acceleration threshold: 4
[ 24.047] (II) config/udev: Adding input device Wacom ISDv4 E6 Pen (/dev/input/mouse1)
[ 24.047] (II) No input driver specified, ignoring this device.
[ 24.047] (II) This device may have been added with another device file.
[ 24.047] (II) config/udev: Adding input device Wacom ISDv4 E6 Finger (/dev/input/event13)
[ 24.047] (**) Wacom ISDv4 E6 Finger: Applying InputClass "evdev touchscreen catchall"
[ 24.047] (II) Using input driver 'evdev' for 'Wacom ISDv4 E6 Finger'
[ 24.047] (**) Wacom ISDv4 E6 Finger: always reports core events
[ 24.047] (**) evdev: Wacom ISDv4 E6 Finger: Device: "/dev/input/event13"
[ 24.047] (II) evdev: Wacom ISDv4 E6 Finger: Using mtdev for this device
[ 24.047] (--) evdev: Wacom ISDv4 E6 Finger: Vendor 0x56a Product 0xe6
[ 24.047] (--) evdev: Wacom ISDv4 E6 Finger: Found absolute axes
[ 24.047] (--) evdev: Wacom ISDv4 E6 Finger: Found absolute multitouch axes
[ 24.047] (II) evdev: Wacom ISDv4 E6 Finger: No buttons found, faking one.
[ 24.047] (--) evdev: Wacom ISDv4 E6 Finger: Found x and y absolute axes
[ 24.047] (--) evdev: Wacom ISDv4 E6 Finger: Found absolute touchscreen
[ 24.048] (II) evdev: Wacom ISDv4 E6 Finger: Configuring as touchscreen
[ 24.048] (**) evdev: Wacom ISDv4 E6 Finger: YAxisMapping: buttons 4 and 5
[ 24.048] (**) evdev: Wacom ISDv4 E6 Finger: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 24.048] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/input/input13/event13"
[ 24.048] (II) XINPUT: Adding extended input device "Wacom ISDv4 E6 Finger" (type: TOUCHSCREEN, id 10)
[ 24.048] (II) evdev: Wacom ISDv4 E6 Finger: initialized for absolute axes.
[ 24.048] (**) Wacom ISDv4 E6 Finger: (accel) keeping acceleration scheme 1
[ 24.048] (**) Wacom ISDv4 E6 Finger: (accel) acceleration profile 0
[ 24.048] (**) Wacom ISDv4 E6 Finger: (accel) acceleration factor: 2.000
[ 24.048] (**) Wacom ISDv4 E6 Finger: (accel) acceleration threshold: 4
[ 24.048] (II) config/udev: Adding input device Wacom ISDv4 E6 Finger (/dev/input/mouse2)
[ 24.048] (II) No input driver specified, ignoring this device.
[ 24.048] (II) This device may have been added with another device file.
[ 24.048] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 24.048] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 24.048] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 24.048] (**) AT Translated Set 2 keyboard: always reports core events
[ 24.048] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 24.048] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 24.048] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 24.048] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 24.048] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 24.048] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 24.048] (**) Option "xkb_rules" "evdev"
[ 24.048] (**) Option "xkb_model" "pc104"
[ 24.048] (**) Option "xkb_layout" "us"
[ 24.048] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
[ 24.048] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 24.048] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 24.048] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 24.048] (II) LoadModule: "synaptics"
[ 24.048] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 24.050] (II) Module synaptics: vendor="X.Org Foundation"
[ 24.050] compiled for 1.14.1, module version = 1.7.1
[ 24.050] Module class: X.Org XInput Driver
[ 24.050] ABI class: X.Org XInput driver, version 19.1
[ 24.050] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 24.050] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 24.050] (**) Option "Device" "/dev/input/event11"
[ 24.148] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 24.148] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (res 75)
[ 24.148] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (res 129)
[ 24.148] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 24.148] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 24.148] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 24.148] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 24.148] (**) Option "TapButton1" "1"
[ 24.148] (**) Option "TapButton2" "2"
[ 24.148] (**) Option "TapButton3" "3"
[ 24.148] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 24.148] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 24.148] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 24.188] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event11"
[ 24.188] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[ 24.188] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 24.188] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 24.188] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040
[ 24.188] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 24.188] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 24.188] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 24.188] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 24.188] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 24.189] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 24.189] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 24.189] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event14)
[ 24.189] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 24.189] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 24.189] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 24.189] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event14"
[ 24.189] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[ 24.189] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 24.189] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[ 24.189] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 24.189] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[ 24.189] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 24.189] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 24.189] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input14/event14"
[ 24.189] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 13)
[ 24.189] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 24.190] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 24.190] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 24.190] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 24.190] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 24.190] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse3)
[ 24.190] (II) No input driver specified, ignoring this device.
[ 24.190] (II) This device may have been added with another device file.
[ 24.190] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 24.191] (II) No input driver specified, ignoring this device.
[ 24.191] (II) This device may have been added with another device file.
[ 24.191] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event5)
[ 24.191] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 24.191] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[ 24.191] (**) ThinkPad Extra Buttons: always reports core events
[ 24.191] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event5"
[ 24.191] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
[ 24.191] (--) evdev: ThinkPad Extra Buttons: Found keys
[ 24.191] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[ 24.191] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input5/event5"
[ 24.191] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 14)
[ 24.191] (**) Option "xkb_rules" "evdev"
[ 24.191] (**) Option "xkb_model" "pc104"
[ 24.191] (**) Option "xkb_layout" "us"
[ 24.612] (II) intel(0): EDID vendor "LGD", prod id 728
[ 24.612] (II) intel(0): Printing DDC gathered Modelines:
[ 24.612] (II) intel(0): Modeline "1366x768"x0.0 75.20 1366 1414 1478 1582 768 772 779 792 +hsync -vsync (47.5 kHz eP)
[ 178.286] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 289.940] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 289.940] (II) intel(0): switch to mode 1366x768 on pipe 0 using LVDS1
[ 289.974] (II) evdev: Wacom ISDv4 E6 Finger: Using mtdev for this device
[ 289.974] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 289.974] setversion 1.4 failed
[ 291.433] (II) AIGLX: Suspending AIGLX clients for VT switch
Last edited by erdi13 (2013-07-29 20:19:11)

Display automatically dims after a minute or so

Hi,
My display dims after a couple of minutes of inactivity which can be quite annoying if you are viewing a movie etc, I cant find the setting which controls this, any clues people
J

Try System Preferences > Energy Saver.
If 'System Preferences' is not in your Dock you should find it in /Applications.
Andreas

Macbook pro screen dims after waking from sleep?

Does anyone know why my macbook pro screen dims when waking from sleep or waking from my screen saver? I can't get it to stop doing this. Thanks.

It sounds like I have the same thing happening. It's more like the colors are washed out, like there is less contrast. I have a hot corner set up for my screen saver. Once I activate the screen saver for a second and then deactivate it, the Macbook screen goes back to normal. I have a 30" Samsung 305T monitor set up as a second (main) screen for when I'm working at home, which is most of the time. I haven't had it unplugged from the Macbook since this started, so I don't know if it happens by itself. I do know that the Samsung looks fine when waking up from the screen saver at the same time.
I tried to find others with this problem in this forum, but got tired of looking through all the other posts that had nothing to do with this problem.
Can anyone help us?

New Mac Mini -- permanent screen dims after installing Mavericks

Hello -- hope you can help. We just purchased a Mac Mini and installed Mavericks on it. It's driving a Panasonic Viera Plasma TV via HDMI, which is its only monitor/display.
As soon as we finished the install and authorized it as a computer for my iTunes account (I did these nealy at the same time so can't be exact at what time the event occurred), the screen dimmed drastically -- from quite bright to very dull. Has any one experienced this, and have you come up with a solution for it? Or do you have any ideas?
I have ensured that the radio buttons in Mission Control are off for multiple display options.
Thanks so much. Look forward to your response.

Some people have experienced problems with monitors attached via HDMI. Most of them are having issues of the windows resizing to an un-responsive window.
For some, the fix was to do a SMC reset. Since you have a Mac Mini, it's pretty easy. Power it down, unplug it for 15 seconds and plug it back in. Wait 5 seconds and turn it on and it should be reset.
http://support.apple.com/kb/HT3964
Here is the thread where peope have resizing problems.
https://discussions.apple.com/thread/5499569
Page two was the "fix".
KOT

Screen dimming after 20 seconds - not coming back to life

This morning, when I started my laptop, it was working fine. THen after about 20 seconds the screen went really dim - dimmer than you can make it go normally, and too dim to use, but you can still see somethign.
I put it too sleep, then brought it back again, and it came to life - but then did the same thing.
Can anybody tell me what is wrong?
Thanks

You also may want to check TVT Power Manager; there are a few options in there that dim the display, some of which really dim the display quite a bit.
Was this or another post on the forum helpful? Click the star on the left side of the screen to give kudos! Did someone solve a problem you encountered? Mark it as "solution provided" to help others with the same problem.

IPad 2 worked w/HDMI adapter but screen FLASHED after ten minutes

I bought an HDMI adapter when I bought an iPad 2. We hooked it up and were playing Monopoly on the iPad and watching on a Panasonic plasma TV. After about ten minutes the TV screen started to flicker/flash.
Is anyone else having a similar problem or maybe a solution to this problem?
Thanks.

Same problem here. iPad 2 + Apple digital AV adapter + 25ft. (thick-gauge) generic HDMI cable + Hitachi 42" HD1080 PlasmaTV. Constant flickering during mirroring and eventually audio disappeared entirely. Identical, but sporadic problem occured when using same setup but iPod Touch 4th gen instead of iPad 2.
Contacted Apple support and they sent me a free replacement AV adapter.
Package arrived in less than 20 hours! Wow! That is FAST!
(actually they goofed and sent me a free iPad 2-specific charging dock instead, but I'm not complaining). One email and a day later, the AV adapter arrived.
Situation improved but only slightly. Now flickering on TV screen is occasional rather than constant. Audio briefly self-mutes randomly also. It seems to be more stable when used in conjunction with the dock. It's much too easy for the AV plug to partially slip out of the input port on the iPad when held on my lap, so standing it in the dock helps to prevent that particular problem. More testing and trouble-shooting is planned.
[email protected]

Macbook air 11.6' (late 2010 model) screen dims after few seconds and does not recover.

Hi,
I am running win7 under bootcamp on a macbook air 11.6'' late 2010 model (1.4 dual core, 4Gb memory, 64Gb ssd). A few days ago the screen started to dim a few seconds after bootup. Even if I pres any of the keys it does not light up again. However, if I connect to an external display it works fine. I use it for work and often I am mobile so I really need the display to work. Any suggestions?
Thanks in advance!
sidirops

Found another forum with the same problem: http://forums.macrumors.com/showthread.php?t=1560774, including another youtube video: http://www.youtube.com/watch?v=vaGOKuwqsaw. The severity of the problem in this link looks worse than my problem. Mine is less severe than what's in this video, but more severe that what's in the first youtube link I provided.
The posts in that forum claim: 1) the problem began after upgrading to a newer OS, 2) it occurs after waking from sleep, and 3) that closing the lid for 10 seconds is a work-around fix.
Would be great if Apple fixes this. I won't buy another Mac, desktop or laptop, if they don't. Macs are too expensive to only get 2 years from, and in my opinion thay are not that much better than other options. I'm going to post a bug report on Apple's web site.

My ipod touch won't dim after one minute

I have an ipod touch 3rd gen and the other day I was changing some settings which changed a setting regarding the back light. I have it set to auto lock at one minute but as I have the music playing the ipod won't dim or lock itself unless I physically lock it.

Follow the instructions here: http://www.apple.com/support/ipodtouch/assistant/ipodtouch/
It will probably result in having to restore the iPod. Here are those instructions, with emphasis on some easily overlooked requirements:
Disconnect the USB cable from the Pod touch, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release only the Sleep/Wake button.
Continue pressing and holding the Home button while you reconnect the USB cable to the device. The device should turn on.Note: If you see the "low battery" screen, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears (iTunes icon and USB connector) release the Home button.
If necessary, open iTunes. You should see the "recovery mode" alert ("iTunes has detected a phone in recovery mode").
Use iTunes to restore the device.
If you do not see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Select the iPod in iTunes and choose "restore from backup".

Screen dim after battery failure

after my battery ran down and unit shut off, my screen is so dim upon startup that i can hardly read it. the brightness control is not helping. any suggestions? (the battery has been in need of replacement for a while) thanks

it could be that you have the auto brightness thing on? you may be near a bright light and have the auto brightness feature in the brightness settings turned on. that feature is ******** IMO

Screen dims after a minute or so

Similar Messages

Maybe you are looking for