Screen Display Problem in Windows 7 OS

Hello Gurus,
I have a scenario for creating sub screen area in sales order 'Additional data B' tab.I created screen and its working fine.But problem is if open sales order in Windows XP system its displaying screen properly,but if i open same thing in windows 7 screen is not showing screen completely. Sub screen is displaying only 70%. I thought it is issue on SAP GUI side.But am not able to find a solution.Please help to solve this issue.
Thanks,
Chittoor.

Hello.
As Miguel mentioned, it might be because of different screen resolutions.
I feel this is one of the drawbacks in SAP screen developments. There is no way we can develop a screen that looks uniform across all screen resolutions which is possible with web application programming.
I would suggest you to develop the screen in a resolution that is most common across PCs and layout various screen elements from the left end of the screen.

Similar Messages

CR 2008 UI display problems on Windows Vista

Hi all,
I have just installed CR 2008 SP2 on my Windows Vista PC, and I am intermittantly having UI display problems when I go between "Design" and "Preview" views of my reports. It seems most often that the "Design" view has the screen redraw problem, in the left-hand sction where is shows Groups / Parameters / Find results. It basically fails to redraw the screen in that area, showing what was on the screen before.
I had previously run CR XI on this workstation with no problems.
Is this a known problem, or does anyone have any suggestions?
Thanks,
Will

Hi Will,
Your monitor size does not matter, unless it's very low resolution, big issue is the drivers they use and something like this is typical of driver problems. My son is gamer and he finds problems like this all the time, even between different versions of the the updated drivers.
If you don't want to update those drivers CR can not add code to work around a buggy video driver. You can always un-install them if they break something else.
You don't need the CD/DVD to do a repair install, go to Control Panel, Add/Remove Programs and select Crystal. It should give you an option to repair.
Thank you
Don

Screen/display problem

I have a problem with my screen/display on a four year old Macbook Pro running OS 10.6.8. Sometimes it goes black but isn't really asleep, just very dark, but I can't wake it up or brighten it. I have to force it to restart. It also gets vertical light patches in the screen, which I can reset using keystrokes, but it still recurs sometimes. This is starting to happen more often. Any ideas what the problem might be?

Could be LED board has a bad back light, logic board is on the way out. Take it to an Apple store, they have a flat repair rate, it's worth a trip ,as they do a diagnostic for free. I had the same issue and they repaired a bunch of stuff for the flat rate, which is about 1/3rd of the cost of the cheapest MBP.

Screen display problem with Lenovo 3000 N100

Hi,
My Lenovo laptop is having a problem with screen display. When i boot the laptop (keeping the screen at 90 degrees to the key board) , there is no display . However, when i tilt it down (lesser than 45 degrees) the display comes back to normal.
In addition, the mystery is that this doesnt happen if do the same after 5 minutes. No matter at what position i have the screen, it works perfect!
Is there a solution for this ? Can some one explain why the display is normal after warming up, but not in the begining (booting) stage.
Senthil.

Lose / pinched wires possibly.
http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-63486upper
I had to re-seat mine , and I still have to wiggle the upper right corner .
A common issue I here,although I just purchased a second used N100 and the screen has no issures.

Screen display problem with Ubuntu on SL400

I just installed Ubuntu latest release 9.04 and having problems witht he screen display. The display does not use the entire screen width. I am losing about one inch and each side. (Note that at times, the display is just right). I tried fixing it using the Display option in System but with not much succes. Any idea how I could resolve this?
Here the output from running lspci in the terminal:
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03)
02:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection
0c:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
0d:00.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
0d:00.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
0d:00.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
0d:00.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
0d:00.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff)
Thanks,
Mathieu

Look:
http://forums.lenovo.com/t5/Linux-Discussion/SL400-running-Ubuntu-Linux/m-p/55236/page/6
and
https://lists.ubuntu.com/archives/universe-bugs/2009-April/081223.html
https://lists.ubuntu.com/archives/universe-bugs/2009-May/088989.html

Full screen mode problems on Windows XP

I've added a full-screen feature to an application. Everything works fine for me. MacOS+Safari. But I another developer on my team is having problems...
He says, "In my Windows XP environment using Internet Explorer 8.0.6xxx I experience the following:
when change to full screen mode, the application does not resize. The browser clearly switched and takes entire screen by our main panel stays the same size and is displayed in the corner.
when in full screen mode no mouse activity works at all, system is unusable
sometimes I see standard message regarding using <esc> key to wexit full screen and our message regarding some keyboard functions won't work. These messages do not appear all the time."
(The second message he refers to is something I wrote, not a system message).
Apparently, if he clicks escape, the application returns to within the browser window, and everything works as normal again.
Has anyone else experienced this behaviour switching to full-screen?

I just found this great site, America Free TV, for watching streaming movies. It goes to full screen mode, but after 15 minutes, it stops and reverts back to the normal size. This is the link I paste into my Quicktime to open a URL stream:
http://www.horrorfree.tv/unicast_mov/AFTVHorrorH264250.mov
Based on "site information," would conclude that the URL cited above is an H.264 file streamed as QVGA at 250 Kbps. Don't see why it would ever have been "full screen" unless you set this mode yourself or you were watching two different files and each was presented differently. In that case, I assume switching files would re-set to default dimensions. Only other thing I can think of is a "periodic scripted refresh" and have no idea if/how that would be done.
Anybody know how I can keep it from reverting to the regular screen? I can't seem to find any posts here about this particular quirk.
Believe this action would be automatic, but you can, of course, revert to "Full Screen" on your end. (I.e., Command-F or selecting "Full Screen" in View menu if watching in QT Player.)
Also, anyone know a different URL I can test to see if it is only this site and their channels?
Go to the Home Page or Index Page.

RemoteFX Display problems with Windows 8.1 VM but not with Windows 7 VM running on Hyper-V VDI Server 2012R2

Has anyone seen anything like this?
After many, many, hours of wading through and eliminating potential variables the issue has been narrowed down to being present with a Windows 8.1 VM and not on Windows 7 VM.
The problem is with glitchy display issues (Random Pixellation, Fuzzy Screen areas, Entire Screen filled with random shapes/colors etc.).
This is a Server 2012 R2 environment it is running Hyper-V Remote Desktop Virtualization Host.
An Nvidia Quadro K2200 adapter has been enabled for RemoteFX and passed through.
Also have tried Nvidia Grid K2 adapter. Both adapters use same driver set and multiple driver versions have been tested.
Two Generation 1 VM's have been created. One for WIndows 8.1, One for Windows 7. All updates installed.
Each VM uses the same set of Hyper-V resources, Virtual Switch etc. (The settings for each VM are the same).
With RemoteFX disabled on each VM the issue is not present on either VM.
With RemoteFX enabled on each VM the issue is present on the Windows 8.1 VM and not the Windows 7 VM.
There is no difference if only one VM at a time is enabled and running. (Not GPU load related)
Talmage D. Holt

Hi,
Generation 2 virtual machines have a simplified virtual hardware model, and supports Unified Extensible Firmware Interface (UEFI) firmware instead of BIOS-based firmware. The majority of legacy devices have also been removed from generation 2 virtual machines.
You can check below article might helpful for your case.
Generation 2 Virtual Machine Overview
https://technet.microsoft.com/en-us/library/dn282285.aspx
RemoteFX vGPU Improvements in Windows Server 2012 R2
http://blogs.msdn.com/b/rds/archive/2013/12/04/remotefx-vgpu-improvements-in-windows-server-2012-r2.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

RemoteFX Display problems with Windows 8.1 VM but not on Windows 7 VM. Both running on Hyper-V VDI Server 2012R2

After many, many, hours of wading through and eliminating potential variables the issue has been narrowed down to being present with a Windows 8.1 VM and not on Windows 7 VM.
The problem is with glitchy display issues (Random Pixellation, Fuzzy Screen areas, Entire Screen filled with random shapes/colors etc.).
This is a Server 2012 R2 environment it is running Hyper-V Remote Desktop Virtualization Host.
An Nvidia Quadro K2200 adapter has been enabled for RemoteFX and passed through.
Also have tried Nvidia Grid K2 adapter. Both adapters use same driver set and multiple driver versions have been tested.
Two Generation 1 VM's have been created. One for WIndows 8.1, One for Windows 7. All updates installed.
Each VM uses the same set of Hyper-V resources, Virtual Switch etc. (The settings for each VM are the same).
With RemoteFX disabled on each VM the issue is not present on either VM.
With RemoteFX enabled on each VM the issue is present on the Windows 8.1 VM and not the Windows 7 VM.
There is no difference if only one VM at a time is enabled and running. (Not GPU load related)
Does anyone have any ideas?
Talmage D. Holt

Hi,
Generation 2 virtual machines have a simplified virtual hardware model, and supports Unified Extensible Firmware Interface (UEFI) firmware instead of BIOS-based firmware. The majority of legacy devices have also been removed from generation 2 virtual machines.
You can check below article might helpful for your case.
Generation 2 Virtual Machine Overview
https://technet.microsoft.com/en-us/library/dn282285.aspx
RemoteFX vGPU Improvements in Windows Server 2012 R2
http://blogs.msdn.com/b/rds/archive/2013/12/04/remotefx-vgpu-improvements-in-windows-server-2012-r2.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

HT201257 Screen/ Display Problems- maybe hardware related?

Has anyone experienced a problem with their display- where an open window repeats over and over the entire screen (sometimes appearing like random squares) and the only way to correct the display seems to be by opening finder and dragging it across the screen? This often occurs when using CS5 inDesign.
Does anyone have a solution/ diagnosis?
Thanks in advance!

That sort of problem correlates with a graphics Hardware problem.
It is possible that if your graphics card is clogged with dust, blowing out the dust and allowing it to stay cool will resolve the problem, but I would not get my hopes up.
The Apple 5770 works in all Mac Pro models, about US$250. Do not buy a non-Apple version, as it will not show a picture under Mac OS X.
http://store.apple.com/us/product/MC742ZM/A/ati-radeon-hd-5770-graphics-upgrade- kit-for-mac-pro-(mid-2010)?fnode=53
http://www.bhphotovideo.com/c/product/726537-REG/Apple_MC742ZM_A_ATI_Radeon_HD_5 770.html

Screen/display problems

I have a xMII web page (irpt) that will sometimes cause the display/screen to go crazy (don't know how else to describe) - no way to recover besides killing the browser window via the task manager. Not sure if it is an xMII problem or if a problem with my html??? The page that this happens on has ~10 applets in 10 different divs that are not displayed until a user clicks on the appropriate checkbox to refresh and display. Has anybody seen something like this?

Hi Sam,
I have seen issues in the past when applets are placed within div tags, especially if the the height and width are expressed as a percentage as opposed to defining the height and width in another measurement such as pixels (see the xMII Best Practices Guide on the xMII Wiki).
You could also consider an alternative technique - the iframe - which I have had better success using to hide and show applets.
Kind Regards,
Diana Hoppe

Is there a way to fix ipod touch screen display problem with song list?

I was wondering if anybody has had this problem? I have an ipod touch 64gig 5th gen for probably about 2 years. I hardly use it because I have it as a back up ipod until primary one dies. This is the first time I came across this problem. Upon turning on device, the first artist/song list I choose displays correctly. Once I start choosing any other artist/song list afterwards, the display for the 1st artist/song list re-appears. If the song list is only a single song to 3-4 songs it will display correctly. Any other song list I choose that consist more than 5 songs, the first artist/song list re-appears on screen like the display is messed up.
For example: Upon turning on device, I choose Aaliyah with a list of 9 songs displaying.
Upon trying to select a different artist and song, for example I choose Nachtmar with a list of 20 songs.
The Aaliyah with the list of 9 songs re appears in place of the song list I am attempting to choose. The songs play and it works, but the display is incorrect. Why is it doing this? Does anybody have this problem? I have tried resetting and it has currently been updated. I have came across this problem just very recently a couple of days ago. I have had a couple of hard resets requiring to erase all data in the past and I don't want to go that way again because I have about 3,500 songs. I have never experience this problem before in the past. I just want it to display the current list of songs. It's inconvenient having to type in every song while playing in the car instead of being able to easily pick an individual song.

I have this problem too and it drives me crazy. When I view my ipod, I don't want to see a list of the first 8 songs in my ipod library. I just want to see the current song playing. It's like the ipod display goes into some type of "sleep" mode while your music plays,and the display defaults to show the first few songs in your ipod touch library, even though none of those songs are currently being played. I have to take the time to either flip the ipod over a couple of times in order for that list to disappear just to see the current song playing.
This is an example of what I see on my display after the current song begins playing. These are the first songs in my ipod library. To get rid of this view, I have to either shake the ipod or flip it over a couple of times and the current song is now displayed, allowing you to see the current song, also allowing you access to the arrows to either fast forward or playback/reverse. On the display, the songs are in a grid or table format (unable to show that here).
Acoustic Soul
Aaliyah
Adventers on the Wheels
Adventures in Paradise
After Tonight
Will Downing

FULL SCREEN DISPLAY problema

Hello everybody!
I've written my first code for J2ME MIDP. I'm learning about paint method of Canvas class.
I put below code in the paint method:
g.drawString("Width: "+Integer.toString(getwidth()),0,0,Graphics.TOP|Graphics.LEFT);
g.drawString("Width: "+Integer.toString(getheight()),0,0,Graphics.TOP|Graphics.LEFT);
g.drawArc........ etc...
When I ran that application on my SE K700i, I can see the information of the width and height of the display screen, that is "W=176 H=176".
But when I ran it on my brother's Nokia 3660, I got "W=176" and "H=144".
Last, I ran it on my sister's Nokia 6610, I got only "W=128" and "H=96".
My questions are:
- Can I set it to a defined size, so when we ran it on any types of devices, we get the same size of display screen?
- There is a panel on top of the screen that show the battery and signal indicators, and one on bottom of the screen for command action. Can I set the application ran FULL SCREEN (no any panels)?
Thanks very much for any reply!

Hi,
There are no standard methods available for scaling images.
But, when you are using TiledLayers and moving Sprites, then you just can keep the images the same. On a phone that has a large screen, you just 'see' more of the game. When you're using a phone that has a smaller screen, then you just 'see' less of the game screen.
There are tutorials and other documents available on the web describing the creation of games using TiledLayer, Sprite and GameCanvas.
But, don't use (create) images that are as large as your screen. It will cause an attack on your device's heap memory and it will introduce inconvenient problems when running the game on different devices with different screensizes...
Good luck!
Cheers,
Jasper

3000/N100 Mouse/Screen Resolution Problems with Windows 7

This is my first post and I appreciate your service. My problem is that after I upgraded from Vista to Windows 7, I find that my touchpad mouse will freeze up & the screen resolution will changes occasionally when I boot up my computer. When this happens, I have to restart my computer and hope that the mouse works and screen resolution is correct. If it does work, it will continue to work until I turn off or restart the computer, then I cross my fingers again. All my drivers are updated. If the touchpad mouse is frozen, I can get my usb mouse to work, but I don't want to have to do that. Has anyone else had this problem, or can anyone offer suggestions?
I never had this problem until I upgraded to Windows 7.
Thanks in advance,
Mike

I am using the Win 7 Enterprise 32 bit trial version.
It is the FULL version, NOT an upgrade.
If you used Upgrade, that may be a clue?
Synaptics touchpad Ver 6.2 (From Synaptics)
File: v14_0_3_C_XP32_Vista32_Win732...
Graphics: Intel VER. 8.15.10.1930
From Windows update.
You did not post your model number, so you may have Alps and Nvidia, who knows?

Screen refresh problem with Windows 7

Hello all,
I've recently begun testing Oracle with Windows 7 on a new HP 2540p notebook computer. I've encountered a very strange issue so far. After logging into Oracle, and Windows switches to Windows Basic theme, I should be taken to the main Navigator screen. But instead, the screen is simply white. If I drag (or nudge) the title bar just a bit, the screen refreshes and I can see the menu items. Then if I click on something (or even use hotkeys - ALT+F to get the file menu, for example), I don't see anything happen. But if I move the window just a bit, the screen refreshes and I can see that it did actually take my input, it just didn't re-draw the screen. I'm wondering if this may be a graphics driver issue (I do have the latest driver for the Intel Graphics Media Accelerator HD adapter), or if someone could point me toward a resolution to this problem. Any help is much appreciated.

Dear All,
Same problem of REFRESH PROBLEM also faced by but only a single and specific Windows 7 client.
if you have resolved the issue , so please share with us.
Thanks
Eidy

Screen display problems, LCD?

I bought an iPhone 5 six months ago from Roger's Wireless and I also paid for the application of a screen protector, for a long time both of these worked very well and I had no problems. The other day I put my iPhone into my locker at work and came back a few hours later to find that two spots had appeared on the display. One was near the top of the screen and it looked like a dis-colored splotch while the other one, that was near the bottom of the screen, looked like someone tried to scratch the screen with a dull object . When I turn off the display and examined the outside of the phone there is no scratches or any other physical damage to the phone, I think it may have something to do with the LCD screen. Also, my locker was locked so I know no one was fooling around with it although humidity or something could have played a factor but I'm not entirely sure. The spots are relatively small but pretty annoying, before this my iPhone was in perfect shape . I'm not sure if I am covered by the one year warranty because my phone may have water damage (although I am not sure). I remember a few months back dropping it into a deep pile of snow and when I took it out it was pretty wet, but still continuted to work perfectly find. Regardless, I'm pretty sure thats accident caused the water damage indicators in my phone to be set off . I looked all over the internet and there is different ways of taking off the actual LCD screen and replacing it yourself but I think I would much rather get this done by a professional. I have also heard that the spots may go away eventually. I am not sure if I am going to send my phone in right away but any help at all would be awesome. Thanks!

Do not attempt to work on your iPhone yourself, doing so will result in Apple refusing all further support for you. Take the iPhone to an Apple store genius bar or Authorized Service Provider for evaluation. Water damage will result in an out-of-warranty status...replacement will be $229 in the US for an iPhone 5.

Screen Display Problem in Windows 7 OS

Similar Messages

Maybe you are looking for