Screen element with help values..

hey,
for example i want to have a ship to user entry in my screen, how do i create it ? i need only the ship to customers to be listed when he selects the drop down arrow..pl advise the code and the field name.
thks

You want that F4 options in the Selection screen or Dialog screen.
If it is selection screen
You can define it using MATCH CODE oBJECt
parameters: p_a type c matchcode object <shelp>. if no help then you have to use at selection screen on value request event.
if it is Dialog screen then you can Set the F4 help u, set the Attribute in for that field in screen painter.
if no Search help then You have to use POV( process on Value Request event)

Similar Messages

Screen element search help

hi all,
i set input/output field search help in screen.
when i choose one of the values in f4 help i hav to do modify another screen element how to do it.
please reply if u know..
thanks in advance.

Hi,
Attaching a search help to a screen element
A search help can be directly assigned to a screen field in two ways.
The name of the search help must be entered in the Screen Painter in the Attributes for the field in the field Search help.
The name of the search help can be defined for selection screens in ABAP reports in the PARAMETERS or SELECT-OPTIONS statement directly following the supplement MATCHCODE OBJECT.
However, input help is only available for this particular screen.
In this case, the search help is only available for this screen.
OR by useing FM
refer this code
TYPES : BEGIN OF ST_OBJID_SH,
OTYPE TYPE HRP1000-OTYPE,
OBJID TYPE HRP1000-OBJID,
END OF ST_OBJID_SH.
DATA : IT_OBJID_SH TYPE STANDARD TABLE OF ST_OBJID_SH.
DATA : WA_OBJID_SH TYPE ST_OBJID_SH.
***********SELECTION SCREEN DESIGN***********************
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
*SELECT-OPTIONS : S_OTYPE FOR HRP1001-OTYPE NO INTERVALS .
SELECT-OPTIONS : S_OBJID FOR HRP1001-OBJID NO INTERVALS .
SELECT-OPTIONS : DATE FOR SY-DATUM NO-EXTENSION OBLIGATORY.
SELECTION-SCREEN END OF BLOCK B1.
**********END OF SELECTION SCREEN DESIGN*****************
*********VALIDATION FOR SCREEN FIELDS********************
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_OBJID-LOW.
IF S_OBJID IS NOT INITIAL.
SELECT OTYPE OBJID FROM HRP1000
INTO TABLE IT_OBJID_SH
WHERE OTYPE = 'D'.
IF SY-SUBRC EQ 0.
SEARCH HELP FOR QUALIFICATION.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
RETFIELD = 'OBJID'
PVALKEY = ' '
DYNPPROG = SY-REPID
DYNPNR = SY-DYNNR
DYNPROFIELD = 'S_OBJID'
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
VALUE_ORG = 'S'
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
MARK_TAB =
IMPORTING
USER_RESET =
TABLES
VALUE_TAB = IT_OBJID_SH
FIELD_TAB =
RETURN_TAB = RETURN_TAB
DYNPFLD_MAPPING =
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
Reward Points if found helpfull..
Cheers,
Chandra Sekhar.

Selection Screen: change F4 Help values

HI,
i using a selection screen with:
parameters: pstat like edidc-status obligatory.
is it possible to midify the entries in the case the user is performing the F4 help ?
example: i want to show the values beginning with "5*" only (in the F4 help screen)
Edited by: Gordon Breuer on Oct 27, 2008 2:48 PM

Now, it´s working but without any entries.
at selection-screen on value-request for p_status.
data: begin of value_tab occurs 0,
         status type edids-status,
         STATXT type edids-statxt,
               end of value_tab.
data : return_tab like ddshretval occurs 0 with header line.
data : x type string.
refresh value_tab[].
refresh return_tab[].
value_tab-status = '53'.
value_tab-statxt = 'processed'.
append value_tab.
value_tab-status = '51'.
value_tab-statxt = 'not processed'.
append value_tab.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
    exporting
    retfield               = 'STATUS'
   dynpprog               = sy-repid
   dynpnr                 = sy-dynnr
    dynprofield            = 'P_STATUS'
    tables
    value_tab              = value_tab
    RETURN_TAB             = return_tab
   exceptions
     parameter_error        = 1
     no_values_found        = 2
     others                 = 3
if sy-subrc eq 0.
p_status = return_tab-fieldval.
endif.

Question regarding creation of xml-elements with numerical values

When i create xml-documents from xml stored in the database (xmltype table based on an xml-schema), i find that numerical values which were stored as 0.395 (with the "." as the decimal separator) are retrieved as .395.
Is it possible to apply a format mask so that the numerical value is retrieved as 0.395?
thanks, Bart
N.b. Note that i select a complete xml-fragment. So my problem seems related to the storage or retreival of 'schredded' XML. I do not use SQL/XML-functions with relational data, in which case i know how to apply a format mask.

I don't use XSLT, i just query the XML-documents stored in an XMLType column with a simple SQL-statement.
I have posted a simple example over here Re: Is it possible to influence the creation of empty elements?

Task.getPayload / getPayloadAsElement not returning elements with no values

I am using BPEL 10.1.3.1.
So, I have a task payload that has 9 elements. When I retrieve the payload as an element, it only contains those nodes that actually had data. So, if I had an element like <creator/>, this element is not returned when using either of the getPayload methods.
Is this a bug? or intended functionality? I don't really like this functionality if it is working the way it is intended....
Input welcome.
BradW

Did you find the solution to this problem.
For my payload the values are null also.
for(int i=0; i<task.getPayload().getContent().size(); i++){
XMLElement xMLElement = (XMLElement)task.getPayload().getContent().get(i);
for(int j=0; j<xMLElement.getChildNodes().getLength(); j++){
System.out.println("getChildNodes map " +
xMLElement.getChildNodes().item(j).getAttributes().toString()
+ " values " +xMLElement.getChildNodes().item(j).getNodeValue()
+ " name " + xMLElement.getChildNodes().item(j).getNodeName());
Any advice would be greatly appeciated

How can I find the element with the closest value to a calculated "target value" in a 1D array?

Hello all,
may be the following question is very simple, but I am relatively new in labview and it would be great if somebody could help me:
I have a acquaried 1D array of data-points. Now, I have to find the element in this array which value is the closest to a calculated "target value".
After finding the element with the value close to the "target value", I have to get the position of this element (i.e. the index) in the 1D array.
Now, I have to use this index to find and extract the element at this position in an other 1D array.
It would be very nice if somebody could help me with this problem.
Thank you,
beam

Find attached a sample vi that you can modify.
Attachments:
select_target_value.vi ‏22 KB

Best Way To transfer screen elements to ABAP variables

Hi all,
whats the best way to attach the abap elements to screen elements
normally earlier versions before 4.7C i always used TABLES : MARC in abap program
and in screen design i used to click "GET from DICTIONARY" to design the screen in Screen painter
The advantage with this approach is all data base elements are attached to our screens like search helps
atomatic checks etc and more over all the information valid for a particular plant are retrived by the system search helps themselves like
for example on the screen we have screen elements/ fields Plant , MRP controller.
in the plant i typed "X110'.
now in the mrp controller i pressed F4 to search for valid mrp controller . Since we associated the screen elements with database elements with TABLES statement all the MRP controller relevent to that plant X110 are displayed. this is quite valid.
But i read usage of tables : in Object Oriented abap is Obsolete is this still the correct way of programming.
I can also use Some thing like this Data : st_marc type type MARC.
and in Screen design i can click "Get from program" This approach will loose all the database assignments to screen elements.
Now i can no longer retrieve the MRP controller relevent for plant 'X110'. F4 will show me all the MRP controllers in all plants.
Is there any other approach to do this. Thanks.
Edited by: Kavitha on Mar 13, 2008 2:37 PM

Please read the following two links. These experts explain it better than I could put in words!:
/people/thomas.jung3/blog/2005/09/08/oo-abap-dynpro-programming
/people/horst.keller/blog/2007/04/24/from-abap-ipo-to-abap-objects-and-the-separation-of-concerns
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4fbafc9e-0e01-0010-dea9-9d23d1b269fb (Under section Modularizing your programs)

StartDrag element with rotationY or rotationX bug

Hello there,
I´ve looked a lot in the web but it seems that no one got this problem... or at least not published it.
I´m making a startDrag with bounds on a element with rotationY value. Ok, it drags, but when got in the bounds it just give a huge bug, distorting the element scale. I tryed some other things but nothing worked - like put the drag canvas without rotationY inside another canvas with the rotationY. I tryied on Flex Builder 3 and Flash Builder and both gives the same bug. Does anyone has an idea or got this error?
PS: in Flex Builder 3 we need to configure it to accept rotationY or rotationX parameters.
This bug is cleared related to rotationY for me because this parameter modifys the 2d into a 3d space, so the rectangle could not be right. I wish someone can help me! Thanks!
http://www.keek.me/testes/drag2.swf
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"
          layout="absolute"
        verticalAlign="top"
          backgroundColor="white"
          backgroundGradientColors="[#0694F7, #501A82]"   backgroundGradientAlphas="[1.0, 1.0]"
          horizontalScrollPolicy="off" verticalScrollPolicy="off" >
      <mx:Script>
        <![CDATA[
            public function   allowDrag():void{
                window_1.cacheAsBitmap = true;
              public function startDragg():void{
                  window_1.startDrag(false,new Rectangle(0,10,300,0));
              public function stopDragg():void{
                  window_1.stopDrag();
            private function   stage_mouseUp(evt:Event):void {
                stopDragg();
          ]]>
    </mx:Script>
    <mx:Canvas   id="window_1" mouseUp="stopDragg();" rotationY="20"   mouseDown="startDragg();" width="564" height="240"   backgroundColor="#FFFFFF"/>
</mx:Application>

Repost!
Hi,
please, can someone from Oracle give me a statement?

Capturing the values of screen elements on click of execute button

Hello folks,
Is there a way to capture the values entered in the screen on click of the execute button?
What I want to do is, I have a selection screen where-in a user can fill the input fields (parameters and select-options). Now when the user clicks on the execute button, the values of all the screen elements (no matter if they are filled or empty) should be stored in variable, so that I can use these values again when I am calling this program from another program.
I want to do something similar to saving a variant, but this save should happen on click of Execute button and user need not require to explicitly save these values as variant.
Hope I am clear enough to put my query in front of you all.
It would be a great thing if you could help me.
Need your help.
Thanks in advance.

Hi,
You need something like this
REPORT A.
TABLES: sflight.
PARAMETERS: pa_scarr   TYPE sflight-carrid.
SELECT-OPTIONS so_conn FOR sflight-connid.
DATA: BEGIN OF it_selscr_values OCCURS 0.
        INCLUDE STRUCTURE rsparams.
DATA END OF it_selscr_values.
START-OF-SELECTION.
CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
    EXPORTING
      curr_report     = sy-repid
    TABLES
      selection_table = it_selscr_values. "here you have all parameters' values from selection screen
"later in some other program you can use this table to call report A filling its selection screen with these default values like
SUBMIT a WITH SELECTION-TABLE it_selscr_values.
Regards
Marcin

Search help on screen elements

Hi I have a screen where I need to include a seach help on the screen element. The element itself is just a generic char 8 field with no dictionary reference. I have tried using the VRM_SET_ VALUES in the PBO but as soon as I press enter it looses the value selected. So I have now tried the using the process on value_request but despite finding and populating 138 values in the search help pop up, the actual pop up screen shows a blank list, with the text at the bottom saying 138 values.
Any ideas what I am doing wrong?
Set list values
    call function 'VRM_SET_VALUES'
      exporting
        id              = lv_vrm_id
        values          = it_values
      exceptions
        id_illegal_name = 1
        others          = 2.
    if sy-subrc <> 0.
   MESSAGE I000 WITH 'Failed to populate username list values'.
    endif.
process on value-request.
field my_field module fill_my_field.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
    exporting
      retfield        = 'MY_FIELD
      dynprofield     = 'MY_FIELD'
      value_org       = ' '
      dynpprog        = progname
      dynpnr          = dynnum
    tables
      value_tab       = it_values "it contains 2 fields that will be shown in the list box
    exceptions
      parameter_error = 1
      no_values_found = 2
      others          = 3.

I'm still having problems with this. Here is my VRM set values - the problem I have with this is as soon as i choose a value from the list and press enter, the value dissappears from the screen element:
data: lv_vrm_id(80)    type c.
    data: lv_key(3)        type n value 1,
          lv_index         type sy-tabix.
    data: it_values type standard table of vrm_value,
          s_values   type vrm_value.
    lv_vrm_id = i_type.
    lv_key    = 1.
    clear it_values.
    loop at it_cabn into s_cabn
                    where ATNAM = i_type.
      read table it_cawn into s_cawn with key atinn = s_cabn-atinn
                                     binary search.
      while s_cawn-atinn = s_cabn-atinn.
        lv_index = sy-tabix.
        s_values-key = 1.
        s_values-text =   s_cawn-ATWRT.
        condense s_values-text.
        append s_values to it_values.
        add 1 to lv_key.
        lv_index = lv_index + 1.
        read table it_cawn into s_cawn index lv_index.
        if sy-subrc <> 0.
          exit.
        endif.
      endwhile.
    endloop.
* Set list values
    call function 'VRM_SET_VALUES'
      exporting
        id              = lv_vrm_id
        values          = it_values
      exceptions
        id_illegal_name = 1
        others          = 2.
    if sy-subrc <> 0.
*    MESSAGE I000 WITH 'Failed to populate username list values'.
    endif.
And here is my code for the F4 lookup - the problem here is that the search help pop dispklays nothing depsite saying it has 138 values. I am wondering if its my it_values that is the wrong format, or is it the fact that my field type doesn't point to a dictionary element?
TYPES: BEGIN OF ty_values,
           type(8),
           descr(20),
         END OF ty_values.
DATA: it_values TYPE STANDARD TABLE OF ty_values,
        s_values type ty_values.
data: lv_key(3)        type n value 1,
        lv_index         type sy-tabix.
* Build lookup values for wood type test
clear it_values.
loop at it_cabn into s_cabn
                  where atnam = i_type.
    read table it_cawn into s_cawn with key atinn = s_cabn-atinn
                                   binary search.
    while s_cawn-atinn = s_cabn-atinn.
      lv_index = sy-tabix.
*      s_values-key = 1.
*      s_values-value1 =   s_cawn-atwrt.
      s_values-type =   s_cawn-atwrt.
      append s_values to it_values.
      lv_index = lv_index + 1.
      read table it_cawn into s_cawn index lv_index.
      if sy-subrc <> 0.
        exit.
      endif.
      add 1 to lv_key.
    endwhile.
endloop.
DATA: progname TYPE sy-repid,
      dynnum   TYPE sy-dynnr,
      dynpro_values TYPE TABLE OF dynpread,
      field_value LIKE LINE OF dynpro_values.
progname = sy-repid.
dynnum   = sy-dynnr.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
    exporting
      retfield        = 'ATWRT'
      dynprofield     = 'TYPE'
      value_org       = ' '
      dynpprog        = progname
      dynpnr          = dynnum
    tables
      value_tab       = it_values "it contains 2 fields that will be shown in the list box
    exceptions
      parameter_error = 1
      no_values_found = 2
      others          = 3.
if sy-subrc <> 0.
endif.

Issue with selection screen element on At slection scree

Hi All,
I am facing an issue with a checkbox which is present within the subscreen of a standard selection screen.
The issue is that the value of the combobox get toggled by itselfon the event mentioned below. I am unable to find out how this combo box value gets changed by itself on the screen events.I tried clear statemetns etc nothing is helping. I debugged with a watch point on this screen element and found this to happen.It just changes the value of the element to a previously held state.I m trying to clear the combobox but this event puts back the tick mark.How can I stop this.
AT SELECTION-SCREEN ON COL_FROM. "COL_FROM is another screen element diffrent from the combobox
Thanks

Hi Vighneswaran CE,
This event corresponds to the PAI module of the COL_FROM field. So, it gets executed each time you press any valid function code on the screen (unless there was an error in a previous field). Nothing abnormal here.
That's difficult to help you on that topic, you'd better tell us exactly what report it is, where you have added your code (and what code) to change the checkbox, ...
Best regards,
Sandra

How to populate 2 screen-fields with one [ON VALUE-REQUEST FOR input] evnt?

I have a selection screen with 2 text inputs - input1, input2.
For the first one I have an "AT SELECTION-SCREEN ON VALUE-REQUEST FOR input1" event.
I successfully get a value there and that is set to the screen field. But I also want input2 to be automatically populated with a value corresponding to the selected input1 (eg. input1=ID, input2=Name).
I'm able to set input2 ABAP variable but not the screen-element.
(I guess that ON VALUE-REQUEST doesn't fire any events for screen fields update, because if I press ENTER after using my search-help, then input2 is set with the right value)
How to solve the problem?

Hi Ramchander,
Actually I used FM F4IF_FIELD_VALUE_REQUEST which doesn't have mapping parameters.
But after your advice I looked through F4IF_INT_TABLE_VALUES_REQUEST and found that it's
DYNP_VALUES_UPDATE FM that solves my task.
Thanks!

Getting values from screen to search help exit

Hi Experts,
I have created a search help in which I am not using selection method but search help exit. Dialog type is 'Dialog with value restriction'. My requirement is to get the values entered in restriction screen into search help exit. Please suggest a parameter which will hold this value in search help exit function module.

Hi M,
As you know there are 5 steps in search help exit. For each step, the values in parameter of your search help exit is different.
For your requirement, you need process in step 'DISP', and get the selection value from 'SHLP-SELOPT'.
Example:
*Build range for customer number
LOOP AT shlp-selopt INTO ls_selopt WHERE shlpfield = 'KUNNR'.
lr_kunnr-sign = ls_selopt-sign.
lr_kunnr-option = ls_selopt-option.
lr_kunnr-low = ls_selopt-low.
lr_kunnr-high = ls_selopt-high.
APPEND lr_kunnr.
CLEAR: lr_kunnr.
ENDLOOP.
Then using the lr_kunnr range in your select statement.
regards,
Archer

Problems with F4 Value Help in NW2004s Portal

Hello,
we are having some troubles with the F4 ValueHelp Extension from the Advanced BSP Programming book (and the blogs of course).
We've implemented the solution on a 4.7 backend and portal 6.0. No problems there, everything was working fine.
We now moved to erp2005 (WebAS 700) and NW2004s Portal (7.0).
The popup shows and I can select entries from the list. But when clicking the ok icon a javascript error is thrown stating that 'parent.document.getElementById(...)' is null or no object.
I think the problem is, that by making a call to 'parent' we are searching in the portal frame and not the BSP. There (in the portal frame) the element is not known so the error is thrown.
I allready changed from the dialog_ie6.js provided on the BookCD to the one delivered by SAP. Did nothing regarding the error.
I also tried changing ZCL_BSP_M_INPUT_HELP->BUILD_ACCEPT_SELECTION_SCRIPT. I changed all the "parent.document.get..." "to document.get...". The error message was still the same, 'parent.document.getElementById(...)' is null or no object.
So now I'm kind of stuck. If I try the example outside the portal everything works as expected. So this clearly seems to be a problem with the portal integration. All involved BSP-Apps are marked as "supports portal integration".
Any ideas on this topic?
Thanks and kind regards,
Alexander Sperling

I have a working solution to the problem. It isn't the nicest solution because it will probably require some modifications to the application that hosts the value help, but we will get to that in a second.
I tried many different ways to come up with a solution that would still work via JavaScript. The portal is now loading the popup javascript in the master frame. It registers event handlers so that if any application triggers a popup internally it "hi-jacks" the event. So regardless of what I change in the BSP javascript library, it gets overriden by the portal one. The portal also now even enforeces its theme on the inner page in the popup. Truly the portal takes complete control over the inner html of the popup.
To make things worse the popop has not path to reach the source that triggered it. The source objects are tracked in the javascript, but because the master frame takes over; the popup window only has access and visibility to the master frame and the navigation frame. In essence in the DOM it is now higher in the stack than the object that actually triggered it.
Web Dynpro gets around this because it doesn't use any client side mechanisms to communicate it results back to the source frame. Web Dynpro has the luxury of always being stateful and therefore can make certain assumptions that would never work in BSP. The hi-jacking is an excellent solution for Web Dynpro. The portal can then override the functionality of Web Dynpro - providing the new functionality of floating the dialog box over the entire portal - without having to make any changes to the Web Dynpro Framework. However they never had our little BSP solution in bind obviously.
It might be possible to completely rewrite the popup_ie.js and popup_ns.js to use all different event, method and variable names. This separate version could then provide complete separation from the portal script. However this is just a theory. I'm afraid that I wouldn't have the bandwidth to rewrite the entire script right now so I focused on a quicker solution.
The only approach that I could come up was to follow the Web Dynpro approach and return to the server with the value. To do that I used Portal Eventing. Portal Eventing allows us to pass a value to the source frame regaurdless of our relative positions in the DOM.
In my inner BSP application for the value help (ZES_VALUEHELP), I made the following change in the model method BUILD_ACCEPT_SEL_SCRIPT_V2. At line 141 I changed the logic. Instead of using JavaScript to write the selected value back into the source element, we will just trigger a Portal Event:
****With an InputField we write the contents directly back into the element
      ELSE.
        CONCATENATE me->js_close1
        `portalFireEvent('com.sap','`
        me->element_id
        `',"`
        key
        `");`
         INTO me->js_close1.
        EXIT.
The other change is within the Element handler class for inputHelpV2 - ZCL_ES_BSP_ELMNT_INPUT_HELP_V2. We need to register the listener for the Portal Event. Therefore in DO_AT_BEGINNING we will add the follwing at line 23 (right after we place the Element Id into the URL Parameters Table.
data: portal_event type ref to cl_portal_event.
portal_event = cl_portal_event=>factory(
    name = <wa_params>-value
    namespace = 'com.sap' ).
while m_page_context->element_process( element = portal_event ) = co_element_continue.
endwhile. "End portalEvent Render
Overally using the portal eventing actually is an intersting approach. There is only one drawback, now we have a server side event. That being the case, our application now needs some event logic to process this event and populate the value. Depending upon if you are using MVC, Data Binding, or Flow Logic this could vary - and would have to handled by each application. The nice thing about the old approach was that it all happened via JavaScript on the Frontend and didn't require the application programmer to do anything - that was obviously its weakness as well.

PrE 12. How to deal with black screen "Created with Adobe Premiere Elements trial version"?

I'm really considering purchasing PrE 12 and would like to try it out. (I have another video editing software and would like to try this one.)
When I add video, I get a black screen "Created with Adobe Premiere Elements trial version". When I hit play, I can hear audio, but I don't get any video (just the black screen). Is there a work around, a setting that I can change, or is the trial version supposed to show the black screen?
Thanks,

To help with troubleshooting, some questions so people have more to work with
More information needed for someone to help... please click below and provide the requested information
-Premiere Elements FAQ http://forums.adobe.com/thread/1042180
And, exactly what are you editing?
Codec & Format information, with 2 links inside to read
-read both links in reply #1 http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
For Mac http://mediainspector.massanti.com/

Screen element with help values..

Similar Messages

Maybe you are looking for