Screen junk issue not fixed with 10.5.2

I'm still getting intermittent screen junk on my 30" monitor on my Mac Pro and also on my MacBook Pro. I was kind of hoping 10.5.2 would have fixed that. Nope.
And Apple's web team needs to get on the ball and add a 10.5.2 option for the OS drop down menu option in the entry screen where I'm entering this.

After reading about the problem in the April issue of MacWorld, page 96 I think, I brought the computer over to the Apple store, showed them the article, and they ordered me a new graphics card (well, it was a little more difficult and time-consuming than that, but you get my drift) - a more recent version of the card.
Et voila!!! No more screen junk. Isn't that kewl?

Similar Messages

RSS Problems not fixed with 10.5.2

I've upgraded to Mac OS 10.5.2 and I'm still having the same problems with RSS feeds as I did before in both Mail and Safari. I am unable to receive new RSS articles to Mail or Safari. Apple said that this issue was fixed with 10.5.2 but it wasn't for me. Please help.
Message was edited by: slh06

After reading about the problem in the April issue of MacWorld, page 96 I think, I brought the computer over to the Apple store, showed them the article, and they ordered me a new graphics card (well, it was a little more difficult and time-consuming than that, but you get my drift) - a more recent version of the card.
Et voila!!! No more screen junk. Isn't that kewl?

My passcode is working to unlock the screen but does not work with restriction passcode. Should they be different?

My passcode is working to unlock the screen but does not work with restriction passcode.
Tried it several times but it did not work, though i can use the phone and all features even after 13 failed attempts.
Should restriction passcode be different from what i set?

There is no default restriction password. If you didn't set it someone else may have. If you can't find it then you may have to follow the steps here:
Forgot passcode for your iPhone, iPad, or iPod touch, or ...
Do you have a backup which might not have this restriction passcode? If so restore to that backup?

ACR 7.1 RC Issue Not Fixed in ACR 7.1

The issue I identified in ACR 7.1RC is not fixed in the production release of ACR 7.1. Maybe I did not explain this in enough detail, it's very easy to miss.
1. Select a RAW file that was previously adjusted using PV2010. When you open the file with ACR 7.1 it will open with PV2010 since the xmp file was saved with that process version.
2. Click on the "!" next to the image and it changes to PV2012 with suggested slider settings. Adjust one of the sliders in the Basic Panel - this is very important becasue if you don't adjust a slider the issue does not show up.
3. With the Basic Panel still selected, click on the three dashes to the right of the Basic Panel to get the pop down menu and select "Image Settings". The image changes back to PV2010 with settings that are saved in the XMP file. Now click on the three dashed again to get the pop down menu and "Custom Settings" is checked, but the image is displaying PV2010, not PV2012 like it should if "Custom Settings" is checked. You just lost your PV2012 settings. ACR 7.0 does not have this issue.
4. If in #3 above you select another panel before you click "Image Setting" the first time you can switch between PV2010 and PV2012 by clicking "Image Settings" for PV2010 and "Custom Settings" for PV2012. After you do this first in a panel other than the Basic Panel for the first time you can then do it in the Basic Panel without the problem occuring.
I discovered this while converting images that were adjusted using PV2010 to PV2012 and like to compare the two Process Versions. I did not have any problems with ACR 7.0, but when I installed ACR 7.1RC the issue occured. I was hoping it would be resolved in the Production Release of ACR 7.1, but it's still there.
I am using Photoshop CS6 on a Windows 7 Professional 64 bit computer, don't know if this same issue exists in Lightroom.

None of the issues reported on this forum have been fixed in Camera Raw 7.1, near as I can see.
The Camera Raw 7.1 software was built on May 15, but Adobe appears to ignore beta feedback unless it's a real show-stopper. I can only imagine the definition of "show-stopper" must include users' systems actually catching fire or something.
Camera Raw 7.1 puts columnar color artifacts like this into images, for example:
Compare the above to the same conversion done with Camera Raw 7.0:
Plus Adobe has removed several color-fringing reduction features without providing suitable substitutes.
I recommend eveyone avoid upgrading to this release.
-Noel

When I try to open the "markets" page on the Firefox hompage, it displays for 3 or 4 seconds and then drops off; I get a white screen; this does not happen with Explorer.

When I open "markets" from the homepage, it comes up but drops off after a few seconds and
I get a white page. This does not happen with Explorer. A similar but much more extensive
problem happened a month or so ago (I couldn't open attachments). I called Microsoft and the
fellow messed about with my computer for an hour or so, but ended up saying he couldn't help
me. However, when he went away, the problems went away.
== This happened ==
Every time Firefox opened
== two weeks ago?

~~red:'''''displays for 3 or 4 seconds and then drops off'''''~~
If you have RealPlayer Browser Record Plugin '''extension''', disable/remove the RealPlayer Browser Record Plugin extension in the RealPlayer Preferences (RP: Tools > Preferences > Download & Recording) . Restart Firefox and test.
See Noah_SUMO's illustrated answer in this thread if the above is not clear: https://support.mozilla.com/en-US/forum/1/557689?
The RealPlayer Browser Record Plugin '''extension''' adds some extra features like saving media files.
Be sure not to get confused with the RealPlayer '''plugin''' (Tools > Add-ons > Plugins) that plays media files.
https://support.mozilla.com/en-US/forum/1/557689?
http://support.mozilla.com/en-US/forum/1/459823
https://support.mozilla.com/en-US/forum/1/446905?
https://support.mozilla.com/tiki-view_forum_thread.php?forumId=1&comments_parentId=472596
http://support.mozilla.com/en-US/forum/1/461211
http://support.mozilla.com/en-US/forum/1/376867
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]].
~~red:'''''Other Issues'''''~~: to correct security/stability issues
'''Update Java''': your ver. 1.6.0.17; current ver. 1.6.0.20 (important security update 04-15-2010)
''(Windows users: Do the manual update; very easy.)''
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
Do the update with Firefox closed.
'''Update Shockwave for Director''': your version 11.0; current version 11.5
NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
SAVE the installer to your hard drive (Desktop is a good place so you can find it). When the download is complete, exit Firefox (File > Exit), locate and double-click in the installer you just downloaded, let the install complete.
IMPORTANT: I have found it wise to always restart your system after doing anything with Adobe products.
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox#_Installing_Shockwave Installing Shockwave]'''

Goods Issue not possible with ref to Reservation using 201 mvt type when reservation created by 311 movement type

HI MM Folks,
My requirement is reservation should be created with 311 movt type. When we do good issue with 201 movt type with reference to reservation
system is throwing an error "Goods movement not possible with mvmt type 311". Due to MRP run we should create a reservation using 311 movement type but not 201 mvt type, (If we create a reservation 201 movt type, during MRP run automatically reservation quantity also taking into consideration, to avoid this we will be creating reservation as 311 movt type). Is there any enhancement to available to reach the requirement. If it is possible give me guidelines.
your help will be highly appreciable.
Regards
Vinay

Dear,
Movement type 311 is for doing transfer posting from storage location to storage location with single step.But Movement Type 201 is to have consumption entry with respect to cost center etc...
You are creating a reservation using 311 movement type and while posting the entry you are selecting the"Executable action in MIGO" is "A08-Transfer Posting" so system will always use the movement type used at the time of reservation only.Here you can not change.
And more over if you process entry with 201 movement type system creates accounting documents but with movement type 311 system will not create accounting documents.
Regards,
Pardhu

Keyboard issue still not fixed with Bootcamp 3.1

It appears that bootcamp 3.1 did nothing to solve the most annoying issue I face. Everytime I unplug my Mac keyboard from my MacBook Pro, and then plug it back in, bootcamp reverts the keyboard back to mapping the function keys using the apple standard regardless of the setting in the bootcamp control panel.
So everytime I unplug/plug-in the keyboard (which is a lot during the day given my job) I have to open the control panel, uncheck the "Use function keys as standard function keys" checkbox, click apply, then check the same checkbox again to re-enable it and click OK.
I've actually become quite used to doing this, but it's still annoying nonetheless.
I'm wondering if there is no way to fix this. Maybe it's a USB thing. Maybe it's a firmware thing in the apple keyboard. Who knows.
Apple, I have posted several times and have never had a response. It would be nice to hear something from someone on the issue.
Thanks.

Dear Deputy Dwane T.,
Hopefully this will help solve the constant setup problem. I found a solution for what may be a similar problem, but it was with the keyboard in OS X rather than in Windows. The problem I had was that I would start up in OS X and then connect the keyboard. I then would get a keyboard setup "wizard", and this problem would happen each time I connected the keyboard. I found that if I would start the computer up with the keyboard first connected before startup, then go through the keyboard setup, and then restart with the keyboard still connected, after that I never would get the setup stuff again. Now I could connect the keyboard at any time before or after startup, and the keyboard would be recognized properly. As for the mis-assignment of the key positions, is there no way to reassign these in the keyboard control panel item in Windows? I see that under the Control Panel "Region and Language" item, if one chooses the tab entitled "Keyboards and Languages" and then the "Change Keyboards" button, followed by the "Add" button, there is an option for "United States-International (Apple)". Does that keyboard layout solve the problem?
Sincerely,
Wilson

TS5216 Apple released on 10-2-13 a software update which fixes camera issue not working with third parties; google, skype etc

I just downloaded and all is back to normal. Took a while but all is well Hope this helps

Is anyone having a solution for this????? don't say that to sell the phone or upgrade it to the next version? I want to use this phone as it was a last gift given by one important person in my life and can't throw it away, please give me a solution.

ITunes player does not play songs since upgrading to 10.5.1; not fixed with 10.5.2 upgrade. What now?

After upgrading iTunes on my laptop to version 10.5.1, my player will NOT play any songs. My Library seems intact and no songs appear to be missing, but no song will play --not a song downloaded from iTunes Store, nor a song downloaded from a CD. I was hoping version 10.5.2 would fix this, but apparently not. Still not working. Songs do play on my iPod and on my iPhone and I can transfer songs from my laptop to my devices; I can also download Apps to my laptop through the iTunes Store, etc.--all other functions of iTunes seem to be okay, only the player is not working. (My laptop is an hp Probook with Intel i5 chip, Windows 7 Pro OS.)

Does it look like the song is playing at the top of iTunes? Can you see the timer moving?
Also, make sure the volume slider isn't all the way to the left (mute).
This Apple document may help too -> iTunes and QuickTime for Windows: Audio does not play or plays incorrectly

I can't believe it - network issues not fixed in Logic 8 ?

I like to have my Logic Projects stored on a network volume but couldn't do it because Logic 7 had one major network problem. If an audio file in your project is located on a network volume then you cannot edit that audio file in the Sample Editor. All the commands in the functions menu are greyed out. Now I tried that in Logic 8 and to my horror, the bug is still there.
I tried the scenario on different mounted volumes on my LAN and it is the same problem. Also creating cross-fades results in an -64 Error when trying to play back the cross-fade. Somehow the audio file (or directory path) is locked, at least as Logic sees it. The permission look ok. I set everything to read&write.
Can somebody confirm that behavior.
Here is the link to the threat on that issue in Logic 7:
http://discussions.apple.com/thread.jspa?messageID=1880622&#1880622
Strangely enough, if I use my iDisk as the network volume, then it works. At least that improved from Logic 7. But I have no idea why the local network volume still have problems.

First of all, when I talk about network volumes, I talk about local network (LAN) not the internet, although you can do that to (i,e, iDisk).
Here are some of the reasons why:
* I like to have as little as possible data on the local drive(s): Projects, Apple Loops, EXS instruments/samples, plug-in data you name it.
* All the data is stored on an XRAID in RAID5 mode that provides maximum security and an Xserve running OSX server acts as the file server
* Easy central retrospect backups of the XRAID for off-stite storage (security)
* When running a multi computer setup, i.e multiple Logic machines configured as one "über-Logic" (think about big EXS libraries, Vienna Instruments, etc), all the 100s of Gigabytes of data have to be stored only once (on the RAID)
* Same storage access convenience when having a multi room stup: mixing room, production room or drop in with your laptop.
* When editing one sound (i.e. EXS instrument) , that edit is available on all the Logic machines that access that network volume.
* When swapping out a Logic machine, you don't have to deal with 100s of gigs of sounds and data stored on that machine.
Networking should be on Apple's top ten list and I'm sure it is. Everything is about networking: Network MIDI (in Audio MIDI Setup Utility), Logic Node, Cluster compression (in Compressor), Bonjour, etc ...
Logic is a professional DAW used in very professional setup. Putting Logic on an iMac to play with some dance loops is just one very limited use of it. Even the disaster version 1 of Cubase SX (5 years ago ?) allowed me to work with the song from the netwok volume.
Logic 8 still not working properly in a network environment is really embarrassing, unless someone can report that it works and I'm just missing something here.

Crashing issues not solved with extensive troubleshooting... Please help!

Hello community,
I'm still in the process of trying everything to resolve these issues, be it hardware related, software... Or both.
Here's an extensive account of the troubles I have been experiencing and maybe someone here who has encountered a similar issues can help me out!
Basically, Premiere will not stop freezing or crashing after loading up a larger project (project file is around 25mb) and a small amount of edits/minor adjustments to the timeline are made. I usually have to wait about 5 minutes before I can even start working because it's loading all of the media (it's footage from a 3 day wedding, i.e. DSLR footage, home video footage, audio files, video elements such as film burns, etc.). After about 5-10 minutes of reluctant work (I fear it'll crash if I work too fast) it inevitably does anyway. This issue did not exist earlier during the assembly edit process or during any other less extensive edit in the past. I upgraded to Premiere CC 2014 about three months ago after using CS6 for about 2+ years.
Trying to troubleshoot this myself I have allocated 13GB of ram for Premiere and while I use it I have no other apps open. I've cleaned out the media cache and attempted to shrink the project size by removing unnecessary content that is not in use. Also I set my previews to play back at 1/4 the resolution and try to keep the media in my bins set to the detailed view (as opposed to thumbnails). I'm unsure if the renderer is set to using CUDA because when I go to project settings, renderer is greyed out. I'm pretty sure my GPU cannot use CUDA in CC (but I used to be able to use it in CS6 I believe... strange). The GPU driver is updated and current.
I've uninstalled/reinstalled PP CC, imported a sequence into a new project (as to reduce the project size significantly to 6mb). I've cleaned up my Mac HDD (more than 10% is free). My working external HDD is a WD Passport Ultra 2TB USB 3.0 drive with 1.2TB free. When I run a benchmark test on the drive it maxes out at around 90MB/s for read/write. I'm using my MacBook's monitor + an external 24" running through the thunderbolt connection. Maybe if I run with the single MacBook monitor alone it could help free up some graphic processing space... ?
At this point I wonder what else there is to do... Basically it seems to me as if the program crashes because of effects that the GPU cannot handle or something (transitions, film burns with blending modes, colour correction, warp stabilizer, and some basic audio cleanup) ... I was pretty confident that my computer was more than capable of managing this type of workflow, but maybe I'm missing something...
If you've read this far thank you and hopefully you can suggest something!

Turns out I may have solved my issues with a very simple solution:
Larry Jordan - Premiere Pro: Trash Preferences | Final Cut Pro Training & Classes
Hopefully this could help others if you have similar issues.

Idoc issue - canbe fixed with enhancement?

Hi idoc Gurus,
I have issue related to idoc.
We have extended the DEBMAS with one custom segment(Z1KNA13).
Custom segment(Z1KNA13) has three fields. one of the field is to store customer's second address line(cust_address2).
When someone changes the customer's second address line in Mainframe. It updates the same in SAP.
And in WE05 under segment Z1KNA13
Field                                         Value
cust_address2                       B. P. road
But if someone deletes the customer's second address line in Mainframe, it does not deletes the same in SAP.
And in WE05 under segment Z1KNA13
Field                                         Value
Even field "Field" is empty.
Could anyone help me to figure out, where the problem could be.
Thank you so much in advance.

Hi,
Could you please clarify if my understanding is correct..
You are receiving the IDoc from the Mainframe...When you change the Customer Master in Mainframe then the MAinframe sends an IDoc to SAP with the change vales....the issue when deleting the record might be from mainframe side wherein they do trigger the IDoc exchange interface only for change and not for delete...if that is the case then you may have to extend your Idoc with another update indicator which states whether to change or delete the address record...
and based on the update indicator you can update or delete the record in the IDoc processing in SAP end...
Why I guess this is because you have sadi that the value in the IDoc field is empty..so if mainframe doesnot send the value in IDoc you will not get the value in SAP also...
Hope you find this helpfull...
Sitakant...

10.4.6 JPEG issue not fixed by the Combo Updater

Hi,
I have the Safari/WebKit issue of JPEGs not displaying (Safari, NetNewsWire) and running the Combo Updater just doesn't fix my issue.
Does anyone have any other tips? I have tried this 4 or 5 times.
this is the Combo I am trying:
12:10 backspace:~/Desktop% openssl dgst -sha1 MacOSXUpdCombo10.4.6PPC.dmg
SHA1(MacOSXUpdCombo10.4.6PPC.dmg)= c9fde5a23bcebd08149301b7ad300881a563c398
mini Mac OS X (10.4.6) 2gb/bluetooth/airport

Welcome to Apple Discussions
The Combo Updater fix has been the usual remedy.
Two suggestions:
Make sure "display images" is checked in your Safari Preferences>Appearance panel.
If it is checked, move your Safari preference file (.com.apple.safari.plist - search for it in Spotlight) to the trash. Restart Safari. If there is no change, move the preference file back to its original location (User Library>Preferences folder). If it does work, go to Safari Preferences and restore any custom settings.

My i-Pad2 won't charge after I downloaded some new stuff from i-Tunes. A note appears on the screen "Charging is not supported with this accessory". I have tried charging through two computers and with the wall socket plug (with another cable). I have

My i-Pad won't charge after I downloaded some stuff from i-Tunes. I have tried charging through two computers and using the wall socket,, with different cables. I have turned the i-Pad off & on a couple of times but it still won't charge. Any ideas will be gratefully received.

The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

L420 Screen Brightness does not change with Function Keys

I have installed the latest driers and since then I am unable to change the screen brightness using function keys. I have installed multiple driver updates hence it is difficult to find out which driver is causing the issue. Any pointers in this regards would be a good help.
Solved!
Go to Solution.

The newest Intel HD driver (from Intel) is causing this issue. Uninstall it and reinstall the driver provided from Lenovo.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

Screen junk issue not fixed with 10.5.2

Similar Messages

Maybe you are looking for