Screen problems, need info

A horizontal grey bar has appeared in the center of my ipod that spans nearly the entire length of the screen. The bar is visible even when the ipod is off but it is not lit up so it is harder to see. I have observed it grow in size and shrink little by little usually by a few pixels at a time. Resetting did not get rid of it and I was wondering if anyone could tell me what's wrong.
The ipod itself has not taken any physical hits that I am aware of but I have not been keeping my eye on it constantly. Also, I keep the ipod in a leather case with a magnetic flip top cover if that is of any use.

I have the same issue with my IPT 32GB. Out of the blue, while watching a movie on a plane a grey bar appeared, small at first, then others and now there is a yellowish area where other bars have appeared and are spreading...
It is still under warranty, so that's good, and Ipod is sending the package so that I can return it.
Wondering if anyone knows what could have caused this? I did not drop it, nor spill liquid whatsoever on it...very strange.
J

Similar Messages

Selection-screen problem:need to go back to selectionscreen not source code

Hello experts,
Please help me on my dillema. I have 2 reports, zreport1 and zreport2. Now, zreport1 submits
values via selection-screen to zreport2. Now here is the problem, when I press 'BACK' on the
selection-screen of zreport2(rememeber we used submit statement via selection-screen on zreport1)
instead of going back to the selection-screen of zreport1 it goes to the source code of zreport1 which
is wrong. And there are 2 selection-screens on zreport1 depending on the user if he is controller or not.
So what I need to do here is that whenever I press 'BACK' either I'm adding or modifying or displaying records
it should go back to whatever screen I called in zreport1.
Here's a diagram.
ZREPORT1**
if v_controller = 'X'
    display selection-screen 1500
else
    display selection-screen 500
endif.
if user wants to add records, submit values from zreport1 to zreport2
and return via selection-screen.
*same goes for edit option.
if user wants to display, get all records then display in ALV.
ZREPORT2**
So lets assume user decides not to add records and decides to go back. so he presses
the BACK button in selection-screen of zreport2. Now here's the nasty part, instead of going back to either
selection-screen 500 or 1500 in zreport1, it goes to the source code of zreport1!. I hope I explained it clearly.
Again, thanks a lot guys for your help!

Hi,
Try this
START-OF-SELECTION.
*----------Sumbit Report-------*
Sumit Report......AND RETURN
*----------Check Condition & back to select screen-------*
IF condition.
    MESSAGE s207(zusm_gen) DISPLAY LIKE lc_e .
    EXIT.
ENDIF.
Set something in the memmory.
this can be used to check the completion of the report.
if the 2nd report executed porperly then u further execute the code.
If u dont have any thing to execute after sumbit report
then u can do is.
START-OF-SELECTION.
*----------Sumbit Report-------*
Sumit Report......AND RETURN
    MESSAGE s207(zusm_gen) DISPLAY LIKE 'S' .
    EXIT.
Message was edited by: Manoj Gupta

Iphone 4 wierd screen problem(need help ASAP)

hi guys,firstly thanks for look into my thread..just now my iphone just had a wierd screen issue. The screen totally bcome like got a blue n greenish stripe..im so confused i really need ur help guys. Now i cant use my phone anymore..totally black w a stripe

yes i did get dropped,but it was long long time ago..it just happen minutes ago..i was chatting w my girl n then like suddenly the screen goes dim,n blank with a greenish stripe. help me pls..this is wierd.i alrdy tried reset button..

Screen problems, need advice

I dropped my iphone a couple month ago. I really would like to buy a new one but I really just don't have the money. So I would really like to know whats wrong with the one I have. I dropped it straight on its face while it was in a rubber case. the screen did not crack but now all the colors streak across the screen. It is hard to explain so here is a link to the picture:
http://img14.imageshack.us/my.php?image=dscf0662m.jpg
If this is something I could fix on my own even by opening it up and doing some work It would be better than nothing. My warranty is already up anyways. Thanks!
(I was thinking maybe a wire came loose for the lcd or backlight or something like that?) HELP!

The only way you could ever find out what the problem is would be to have the phone examined. It could be anything, since the phone was dropped. I think it might be an exposed or out of place wire or other internal mechanism that conflicts with the display.

SCREEN PROBLEMS NEED TO CHANGE SCREEN

HAVE A MACBOOK PRO 15'' LATE 2008 AND I BROKE THE LCD SCREEN AND I WANT TO INSTALL ANOTHER BUT HERE IN BRAZIL IT IS TO EXPENSIVE SO I WANT TO KNOW HOW I KNOW THE ESPECIFICATION OF THE SCREEN TO BUY IT ONLINE AND ONLY ASSEMBLE IT HERE THANX A LOT

Look through here for parts and repair instructions.
http://www.ifixit.com/Guide/Browse/Mac
Regards

Z10 screen problem

I have a damaged Z10 screen and received a replacement Z30 from service provider, however unable to device switch on Blackberry Link as cannot login to old Z10 device due to screen problem. Is there a way to device switch so that I can recover info on my old device? Is there a way to erase Z10 device as don't want to return it with info on it despite the damaged screen does not allow access? Regards

The data backups on BlackBerry Link are associated with your BlackBerry ID. You need to sign in to your BlackBerry ID on your new phone then you should be able to restore it with your backup file. One you've logged in to the new phone, you'll be asked if you want to associate your BB ID with the new phone. Once you say yes, any information associated with your BB ID should be accessible by your new phone.
The Device Switch feature might not work but to sign in to your new phone then load a backup file should work.
Cheers.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

Palm Z22 Screen Problem (Unique?)

So I know there are tons of posts about screen problems, but after some searching, I think mine is a little bit different.
My screen is not responding to taps, but at the same time it acknowledges them. I'll try to explain: I cannot write or navigate with my stylus (navigation buttons still work), however if I turn off my unit with keylock and try to turn it back on, the screen seems to acknowledge that I'm trying to tap it (stays on as long as I keep tapping it instead of just turning off), although I cannot actually hit the "unlock" button. I opened up the case and made sure there are no wedgies. Additionally I tried writing while the cover was off and the screen was clean, and the situation is still the same. Again, it does not turn off when I try and disable the keylock, but will not respond to specific stylus inputs.
I also tried to check the screen-to-board connection and it seems secure but since I don't know how to test its connectivity I cannot actually confirm if the input connection works (I'm assuming it's the smaller of the two cables, as the larger seems to supply power).
Any ideas what could be causing this?
Post relates to: Palm Z22

After performing the soft reset, press "done" with the buttons on your palm. You will be brought to the preferences screen. Use the 5 way navigator to move to the "touchscreen." Then, tap the center of the target (the x around three circles) and see if the target moves around the screen - to the top corner, middle and bottom corner. If it does, then after 3-5 taps, the touch should be aligned and your palm should be fine.
If the target moves from one corner to the other, your palm is probably at the end of it's life.
You could try one more thing - the hard reset which wipes everything off your palm. A hard reset is performed by holding down the power button while sticking something thin (your stylus, paper clip) into the back reset hole of your device. Keep your hand on the power button while you release the paper clip from the reset hole. The screen will now say "Palm Powered." Take your hand off the power button. You will now see a screen in 5 languages prompting you to erase all data from the palm. The screen will say "erase all data? Yes - up, no - down" and you need to click on the up arrow (silver button on the 5 way navigator on the bottom of the palm). This will erase all the info from your device.
If after the hard reset you are still not able to get the palm to move...well then, it's all over...
Message Edited by ComputerWiz on 10-30-2009 12:15 PM

TS1424 Needing info on an album I just purchased. Every song on the album seemed to download except the last. Then when I went back to play them it seemed to only download 2 minutes of each tune

Needing info on an album I purchased. Thought every song had downloaded . But the last song didn't download and then on the playback every song only had 2 minutes of play on it .It's like they are only partially downloaded. Thanks for any comments!

If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

How to How to install ATI Radeon HD2600 driver on bootcamp 3.0 windows 7 partition w/black screen problem

Ok....so i've posted this question in a different way, and i gotten several "scratch the surface" answers from people just saying to install "Ati catalyst", or insert the os x dvd and run set up.exe, and update to boot camp 3.1 or 3.2...while these all seem like great suggestions, I am finding myself needing more specific direction or "hand holding" so to speak.....here is the MAIN problem...
The Background/history
I used boot camp (3.0, and i found updates for 3.1 for imac and for windows, but can't find for mac pro, AND they all are ".exe" files which run on windows..which as you'll see is the big part of my problem...So I recently updated my mac pro (with the ATI Radeon HD2600 graphic PCIe card with 10.6.7 from 10.5.8. I created a single partitioned drive to install windows 7 professional 64 bit. The download software function didn't work (Thanks, APPLE for that poor level of support) so have to select the option that i have already downloaded, or have other media with the drivers already on it....i restarted with the windows 7 disk in....
The installation of Windows 7 Pro 64-bit
So the installation of windows 7 seemed to go flawlessly, was able to use my existing 23" hd apple cinema display (so somehow it has drivers that work with the graphics card, or maybe the motherboard's on board video components) and i select english, and install now, custom, blah, blah, blah...installation causes a few reboots, then restarts ultimately back in os x since that is the default boot os i use on this desk top and have to do the "opt" button to select booting in windows....so when i try restarting in windows, now using the actual boot drive on which i am installing it, it ran through another reboot or two, but then after that, my display goes black.... in the communities, the solution sounds super simple... "go download the ATI catalyst for the black screen problem....windows 7 doesn't have device drivers that work with the ATI radeon hd2600...no problem, just go download and install...."
The problem, re-emphasized : I cannot even finish the install for windows, because of this driver problem....i cannot see anything....I have tried to reboot in safe mode, and that then seems to invoke whatever basic drivers that do work, likely through the motherboards onboard video vs the actual graphic card, and the screen works and says that it's wanting to complete the installation, so i'm thinking awesome this is gonna work....and then.. "windows installation was not completed and cannot be completed in SAFE MODE, need to restart, blah, blah, blah" pops up...and forces reboot...so Safe Mode allows me to see, but won't allow me to finish the install of windows 7...and without completing the install i can't run (ranther I DONT KNOW HOW TO) any of the various .exe files everyone is telling me are the solutions to my problem...like update 3.1 and 3.2 bootcamp...they're all .exe files? not sure why, because bootcamp runs in 10.6.7 i thought, but whatever...it needs running Windows to execute...then the ATI radeon hd2600 driver for windows 7 that i downloaded from the site has an installation program that is an .exe file, which needs windows to run... Does this make sense, why i can't just use these fixes, that seem to be the only fixes out there....so can someone school me step by step here (not just the highlights) of how to update bootcamp, and how to install the ati radeon driver without having been able to complete the windows 7 installation because the monitor goes and stays black????
This is so very frustrating for the record...and any substantial help "not just go download this..." would be immensely appreciated.
Some other things i've been told to try that i've tried and nothing seems to happen as i'm told it will....
---I've been told to install the osx dvd and run "setup.exe" - AGAIN...it's an exe file...and 2 - when i put in the os x file it just wants to re install 10.6...so need more help if this is even a real solution to understand how to make it work...
---I've been told to update boot camp to 3.1 and/or 3.2 from 3.0, using Apple Software Update....Well, my software update is saying everything is up to date and there is nothing new to download at all, and when i reverify the bootcamp version it is still only 3.0.2...and again downloading the updates from www.apple.com/support/ for 3.1 and 3.2...all of those are .exe files...need windows to run them...again, refer to the problem described in detail above...
---I've been referred to the black screen on imac early 2011 thread saying it should fix my problem...and reading it it SEEMED like the most promising resolution...it involves creating a boot flash drive for windows 7 and an xml file that sets the imac drivers to auto install during the windows installation..and it got me farther than anything else..but still ultimately ended up in the darned black screen...my assumption is that it's because it's for imac and not mac pro so not ati-radeon specific drivers....ok....that's enough..please...anyone who thinks they can help...your help is desperately needed...thanks so much in advance!

hey Hatter, thanks so much for getting back...so just to be super clear...is there no way to install the drivers using an exe file given my current state? no way to do it with command prompt or something? if can make work with existing card, i'd prefer it...now when you say it's 'toast' how do you mean? it works well with the os x partitions and always has...so i'm not sure i follow, just want to be clear...
Now to your point of starting with only the one drive installed...so i would put that bootcamp drive in bay 1 and disconnect the rest...i'm not totally sure what you're suggesting the effect should be of doing this? just that i'm just installing windows without the bootcamp deal...but if windows 7 doesn't support the ati radeon hd2600, it still will go black screen no? or you're saying it will run video through the motherboard if it's the only bootdrive, and will run all the way through the windows install without trying to switch over to the hd2600? (slrry flr these questions..just really want to make sure i understand what you're telling me..thanks so much for your patience and help by the way...it's very greatly appreciated...your support is priceless!
So now, assuming none of the above is possible...referring now to the ati 5770 that you referred to...you mention it works with 10.6 well, and that windows 7 supports it ...2 questions on that
1) Windows 7 supports" meaning, out of the box windows 7 supports it? or will i have to install drivers still through some update, because again, if that's how i have to do it, then won't work, cuz can't start windows to see anything to install any drivers or run any thing at all...so it would have to just work with initial installation.
2)hardware wise for my Mac Pro 3,1...intel dual quad core xeon, blah blah....will this card work? it's a PCIe and should fit on my board no prob, etc?

Trying to update OS to fix White Screen problem.

Hello, I have had my Blackberry 8520 on a Virgin contract for about a year and a half now. Recently it has started randomly just changing to a black white screen that won't allow me to turn it off or perform any functions. The way I temporarily fix this is to plug it into the charger which acts like a reboot and brings it back to normal (pulling the battery to reboot it just restores the white screen after loading). In trying to find the resolve to this problem, which I haven't yet, I rang the Virgin helpline who told me to update my OS. I currently have the version 5.0 Bundle 1096 and I am trying to update it to the 5.0 Bundle 1168. I have been having increasing problems with trying to do this. I updated my desktop software for Blackberry but updating through this software always brings up the message at the install stage (after backing up my data) - "An error has occured while downloading software for your device. Please verify your internet connection or try again later, if the problem persists." My internet is working fine and I have tried many times to update through this way. I have also tried updating through the blackberry website "web based updates area" that brings up the same message. Looking through over message boards, I tried the attempt at updating through the LOADER.EXE way. However after trying to download the OS manually to my computer, which my internet explorer thought was dangerous, it came up after with another error message - "Error 1335. The cabinet file 'Data1.cab' required for installation is corrupt and cannot be used. This could indicate a network error, an error from reading from the CD-ROM, or a problem with this package.' I am now out of ways to try and update my Blackberry and have no idea how to solve the white screen problem. Any help would be much appreciated. Karen x

Just to specify the final type of the updating I tried was following the instructions on this links - http://us.blackberry.com/support/apps-and-software/desktop-and-device-download-sites.html I choose Europe, Virgin Media, Blackberry curve 8520. I got the software on to my computer and the error message that came up, appeared after choosing language and agreeing to the terms and conditions and starting the installation. Sorry about the big clump of writing; the post removed all of my paragraphs when I posted it. New to this! And need help! Thanks x

Screen problem making iPad unusable

My iPad2 is 15 month old and has developed a strange screen problem. It seems to have developed a mind of its own, typing ahead with random characters, doing its own thing when scrolling and trying to select in apps. Two days ago Apple support said restore to factory settings which I did. Same problem came back. Yesterday Apple support said the same thing which again I did. Same problem came back Today Apple support say it's a hardware issue out of warranty. We had a polite discussion about EU legislation but to cut a long story short, they basically said "sorry about that, but there is nothing our policies will let us do, you're on your own"
Not exactly the response I hoped for. So I've now got an iPad that is basically useless, unless I want to use it as a door stopper.
My business made a strategic commitmnt to Apple in Mid 2011 and this iPad was part of our shift away from PC/Windows. It's the first time I have needed to deal with Apple Support, and while each of the people I have spoken to have been professional, understanding and helpful, they have been unable / not allowed to assist any further.
Yes, we could have taken out Apple Care Agreements. We chose not to on the basis of 2 year statutory warranty and Apple's reputatiuon for reliability. Seems I made a big mistake here and am left wondering if we made the right decision in going down the Apple route. Our investment in Apple hardware and software is massive for an SME and our workflow depends on iPads.
I'm left with a problem. Thanks Apple.
I'm still a fan but my blinkers have been removed. No longer will you be giveen the benefit of the doubt when you screw up - Maps, WiFi etc - as you have had a direct and negative impact on my business and missed a chance to keep a very happy customer on board.
Does it help to post this? Not really, but it's off my chest.

And you are within your "rights" to post this. But you do realize that we are not Apple employees - correct? We are just other users like yourself. If you feel that you have been treated unjustly, move up the Apple chain of command. Politely demand to speak to the next higher up and go from there.

Error while navigating planning 9.3.1 through workspace/ need info on cpx,

Hi all
Hey I installed the planning 9.3.1 and also I created the application name, using planning address. but the problem is I am unable to navigate through workspace. I am getting three dialog boxes....
" invalid or could not find module configuration"
"Required application module hyperioin planning app wizard is not configured.please contact your administrator"
" Communication error"
I'm able to see the application name in projects of shared services. Can any one face the same situation , and also I need info regarding how to initialize modules of capx and wfp.
regards
M.V

Hi,
If you did a standard install then it should be running on port 19000 as well.
I take it workspace is working fine on port 19000
http://<hostname>:19000/HyperionPlanning/LogOn.jsp
^ this will be your workspace servername..
When you run the configuration utility for Reporting and Analysis and the section "Configure Web Server", this is where you set up the Apache Server for workspace, there is an option for "Planning", this should be ticked and the correct planning server entered as it will default to the workspace server.
The apache server redirects requests on the standard workspace port 19000 to the correct server and port, so for planning it redirects to the planning server and port 8300.
Cheers
John

IMac G5 Graphic Card Replacement for blue screen problem

When I turn on iMac, I only see blue screen, the apple technician said Need to replace graphic card, Nvidia Gforce 7600GT 256.
1, can it install in IMac? Seem like it work for PC?
2, I had blue screen problem several time, I think I turn on iMac too long, so it burn out graphic card.
3, I have 2007 G5 24" screen model, is any durable and afford graphic card you recommend?
Where to buy for cheaper price?
Do I need to change mother board?
4, can I replace it by myself? Any picture or video for graphic card replacement?
Thank you.

If you look around, you might be able to find someone who will replace just the chip on the graphics card, which is what usually fails. It will take someone highly skilled; they really have to know what they're doing--it's not an ordinary soldering job.
Here's someone who found a non-Apple service to do this, and it proved to be far less expensive than a full logic board replacement. But I think this was in the UK.
https://discussions.apple.com/thread/4996559?start=0&tstart=0
I have no personal experience with this outfit, but you might check them out.
http://dttservice.com/

Need info on RA

Hi all,
i am in mid of RA Config...
where in i need to Assign the Line ids to cost elements
here we create the coding mask for the cost element to be assigned to line ids...
so we need to create diff cost elements a/c to the coding mask....????is it so....
so in next step ie in "Update of WIP calc and RA(OKG4)"
where in for our Cntrl area i need to maintain diff cost elements....
so now i am finding the problem in creating those cost elements.... for each diff cost element types ie primary,sec,rev,settled...do i need to create diff G/L account ???? coz it asking fo it so....and hw to create those diff cost element..
is it thru (ka01)....
i have link regarding RA...but it does nt say anything abt these cost elements...
need info on this...
reply soon for this thread...

Hi Amit,
While i was doing the config according to the notes given by u...
i was stuck in OKG8
they have told me to set RA cat as RFKA and POCB
BUT THOSE REC DOES NT EXISTS....
where in i can create these RA category.....or can i use any alternative RA category
so can u tell me wat these mean if u knw...and which P&L and Balance a/c need to be used or created and provide the TCOde if u have as the one of my CO consulatant hasnt turned up today....so i only have to create them..
AND TO ARCHIVE THE PROJECT IS THE STATUS OF PROJECT MUST BE SET TO CNF MCNF TECO
OR ITS ENOUGH THT ITS BEEN RELEASED...
REGARDS,
PREETI.P.G

EMac random black screen - advice needed

I have an eMac G4 1GB, max RAM, OS10.5 Leopard. I have recently had the black screen problem. It randomly turns black, with everything running in the background. The screen then returns to normal a few minutes later. It sometimes runs for hours without a problem, other times it will happen several times a day. The machine runs perfectly otherwise... would be great to fix it if possible.
So far I have tried the following:
- Opened the eMac and cleaned the interior of dust
- PRAM reset
- Replaced the battery (which was dying because the date would reset on unplugging).
Are there any other straightforward things I can try, or is this most probably a hardware failure and ultimately a write-off?
Any ideas appreciated.

For the Fetcher to show in Activity Monitor, you need to change AM's "Show" setting from its default of "My Processes" to "All Processes." The setting is in the top bar of the AM window:
Thus set, some other bandits might show up, too.
To neuter Top Sites so the Fetcher is not activated, go to Safari > Preferences and:
1) on the General tab, make sure no "open with" option is set to "Top Sites."
2) uncheck anything mentioning Top Sites in the Bookmarks tab.
3) go to "Reset Safari..." in the Safari menu and select the two boxes shown here:
then reset.
That procedure gets rid of a nuisance background process without deleting anything. You can restore Top Sites with a few mousclicks should you need it. On a PPC with limited RAM, I find Top Sites is not my friend.
Even when I upgraded to a hot quad-core i7 iMac, I still turned it off. It;s eye candy I don;t need.
Camino is more respectful of system resources than Safari in my experience.

Screen problems, need info

Similar Messages

Maybe you are looking for