Script command 'BOX WIDTH ...' TAKES NO EFFECT

HI:
In my script ,i use many
'POSITION XORIGIN '2.1' CM YORIGIN '3.4' CM
BOX WIDTH '32.4' CM HEIGHT '0.1' MM INTENSITY 100'
command like this , but some of this didn't work, i dont
know why ,pls help me, tks !!

ye, it takes effect, thanks a lot!
but i wonder why some '0.1' mm line can display and some cant?

Similar Messages

SAP Script Box Width Vs Font Size

Hi All,
I have a SAP Script where Boxes Width are based on CH for ex..
BOX YPOS 1 LN WIDTH 3 CH HEIGHT 1 LN FRAME 1 TW'
BOX YPOS 1 LN XPOS 3 CH WIDTH 18 CH HEIGHT 1 LN FRAME 1 TW
Now i have to populate the value in that 2 box with some values say mandt and matnr which are 3 and 18 char in length (Keeping those length in mind i desined the boxes)
When i use Courier Font Size 12 , it fits fine in box boxes but when i use font size 8 then everything is messed up...
It start up properly then the first character of matnr is displayed in the first box...
How do i determine the box size width based on the font size ...
In SAP Script header setting i have char/inch set up as 10 --Would that make any difference
Please the client needs in SAP Script only...
Thanks

Any suggestions will be appreciated

Regarding SAP SCRIPT COMMAND

Hi all,
Can anyone tell me the which command i use in sap script for &itab-kunnr&.
so many command are there so please suggest me...........
and give command tutorial or link also....
Zenithi.

hi
good
check out all these SAP SCRIPT commands
New-page <page name> Prints the text following this command on a new page (when a page name is specified then that page is taken as the next page)
Protect .. Endprotect This acts like a conditional page break. Putting the text within this command prevents the breaking of the text across multiple pages. If there is not enough space for the entire paragraph to be printed in the space remaining on the page, then the entire paragraph is printed on the next page
Box <xpos> <ypos> <width> <height> <frame> <intensity>
Position <xorigin> <yorigin> <window> <page>
Size <width> <height> <window> <page>
The BOX command draws a box as per the specifications. The x y co-ordinates are for the upper left corner relative to the values in the position command.
POSITION command is used to set the x y co-ordinates with respect to the start position of the window.
SIZE command is used to specify the size of the box that we need to draw.
Varying these parameters also helps to draw a line instead of a box.
IF .. END IF This allows the conditional printing of the text on the output document. The various conditional operators that can be used are as follows
= EQ Equal to
< LT Less than
> GT Greater than
<= LE Less than or equal to
>= GE greater than or equal to
<> NE not equal to
The logical operators that can be used are as follows
NOT, AND, OR
reward point if helpful.
thanks
mrutyun^

Script command

Hello All,
Please let me know the below script command how to make and how to debug this command.
Below text in the Standard text.
e.g. /: SIP_TABLE STAB_01
Thanks in advance.
Regards
Vikas

Looks like this is a text element in SAP script and if so it will be called using WRITE_FORM from print program.
You could activate the SAP Script debugging from SE71==> Utilities==>Activate debugger.
Furter you could debug the script and reach your text elements for values.
or
Putting one breakpoint @ the write form of this element and check the values which are used in this element.
If it is a standard text you need to add prefix as INCLUDE for printing. Above mentioned debugg will take you to that standard text.
Hope this helps you.
~thomas.
Message was edited by: Thomas Mann

Portal: custom i-view definition (transaction) how to hide command box

Dear Sirs,
we are trying to define a transaction i-view (displaying a SRM transaction)
in portal but hiding the command box.
The i-view has been defined under portal content \..\iview\GUI\
We have tested some values in "Parameters Forwarded to Transaction" in I-VIEW definition,
like...
noheaderOkCode = 1
WEBGUI_SIMPLE_TOOLBAR = hide, no etc..
listed in other threads
but whitout any effect.
Is this a possible feature and what are the correct values ?
From SRM side we have tested the transaction in SE93 in both modes, EWT and normal.

Sorry but we have any result with these values
~NOHEADEROKCODE = 1 or
~WEBGUI_SIMPLE_TOOLBAR = 0
In the "Parameter forwarded to transaction" in the iview definition from portal.
The command box appears in any case.
Whe should remove also the "menu" button.

Why with Safari do I keep getting a slow script dialog box?

When using Safari I constantly get a slow script dialog box. How can I fix this problem? It has been happening for two or three days now. It makes every thing I do, watch take so much longer.
Please help!
Idashuman

get a script blocker soonest! Install and set ... Javascript Blocker is a good one and comes with a pretty good blacklist set default.

Problem with Script window(Box frame)

i draw a box in script window,iam able to get it in print view of SP01,but the box was not displaying on printed output.
i tried in allways increasing window size,decreasing box frame size...etc
please let me know any reason behind this and suggest me the solution

Hi anil,
Check this
/: BOX FRAME 10 TW
Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
/: BOX INTENSITY 10
Fills the window background with shadowing having a gray scale of 10 %.
/: BOX HEIGHT 0 TW FRAME 10 TW
Draws a horizontal line across the complete top edge of the window.
/: BOX WIDTH 0 TW FRAME 10 TW
Draws a vertical line along the complete height of the left hand edge of the window.
/: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
/: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
Regards
Naresh

ERROR: red-white checkered box when exporting Motion effects from FCP-COMPR

Hello, im having an export issue with motion clips inside Final Cut Pro 2.
I exported the shortfilm using quicktime-same as project.
Suddently in the exported file i get red and white chekered box where the motion effect takes place.
Im using chroma to replace images from a tv set, i use the same effect around 15 times across the shortfilm, but only in two places it shows this red & white box...
Does anyone knows why this happens, how can i solve it?
I tird to export using compressor, but in compressor´s preview window, it shows exactly this red and white box everytime my motion efects apears.
PLEASE HELP!!!!
Thanks a lot for any suggestion
ger

sorry for a mistake, im working on Final cut Studio 2

Can I use my iPhone 6 out of the box to take photos, before syncing it with my computer?

I will be receiving a new iPhone 6 at the beginning an upcoming trip and would like to use the great camera on it to take photos. The problem is I won't have my computer with me during this trip. Will I be able to use my iPhone right out of the box to take photos, and when I sync my iPhone for the first time will I risk losing those photos? Thank you for the help.

Will I be able to use my iPhone right out of the box to take photos
Once you have activated the iPhone with a sim inserted
when I sync my iPhone for the first time will I risk losing those photos?
Yes unless you transfer Photos off iOPS device to your PC/Mac
see this
Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support

For some reason I cannot download and install the latest version of iTunes. 11.0.2. Could you help please? Each time I try, I get a command box saying 'The feature you are trying to download is on a network resource that is unavailable. Click Ok to try ag

For some reason I cannot download and install the latest version of iTunes. 11.0.2. Could you help please? Each time I try, I get a command box saying 'The feature you are trying to download is on a network resource that is unavailable. Click Ok to try again or enter an alternate path to a folder containing the installation package iTunes.ms in the box below.
Please help!
Many thanks in advance
Ben Bentley
West Midlands
UK

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

FF 7.0.1 on Mac OSX 10.6.8: I sometimes get the "unresponsive script" dialog box in the top left corner of the screen, so far out that I can see only the bottom right corner of the dialog box. Is there any way of re-centring it?

FF 7.0.1 on MacOSX 10.6.8 (not this machine!): I sometimes get the "unresponsive script" dialog box jammed into the top left corner of the screen so that only a quarter of it is visible.
Is there a way of re-centring the dialog box (in particular, when its top edge is off the screen)?
Thanks!

There is no way to preserve view preferences.Just remember or annotate the zoom % used in the package.
You may want to open an MS Connect item asking to add such a feature.
I can tell you it may not be implemented because a package may be opened on different size monitors.
Arthur My Blog

Hide Command Box through Sap ECC 6.0

Hi, SAP GURU's
How is it possible to globally hide command box in a Sap ECC 6.0. or hide it only from Enterprise Portal.
Regards
Sumeet Sharma

Hello Sumeet Sharma
Hiding the command box in SAPgui for windows is not possible.
Disabling it would probably mean you have to rewrite the SAPgui interface (not feasible).
Restricting your users from accessing content they are not supposed to access is based on authorizations, if you give everyone all rights you are bound to heading for trouble and issues restricting where they are going. Also when you get an audit they will surely flag this point as being dangerous.
You can check with SAP by opening a customer message.
Kind regards
Tom

Hide Command box in transactional iview

hi,
I have imported the Best practices for EP package. In the package we have webgui transactional iviews. my concern is when i run the iview i can see the command box and from that i can run other transactions. I want to hide the command box so that user can run only that particular transaction.
using webgui (ITS) this can be done by setting the service parameter ~NOHEADEROKCODE = 1. But when we import the business package where do we need to set this service parameter.
Is there a way to do it?
Thanks in advance,
Gopi

Gopi,
Are you using V2.60.
You are best to log an OSS message under component
SV-SMB-AIO-BP-EP.
James

Hide command-box in portal

I create a ABAP report with ALV grid layout.
I link the report to a transaction.
This report will be used in the gui and add to a roll in the portal.
The transaction iview works well, but the command box is also visible.
We use ~webgui_simple_toolbar in the iview as paramater to restrict the command-box.
This is working. When the report first appear only the execute button appear.
The problem is after execute, the ALV grid info appear with the command-box. .
Although the user cannot use the command-box, i stll want ot prevent this from appearing.
I try to use PF-status in my program, but can't get rid of the command-box, menu.
Regards
Frances

Hi Shelly,
I've recently configured ITS transactions to publish on portal setting this parameters on SICF to limit actions, header, possibility to open other transactions:
SAP Library - SAP ITS in the SAP Web Application Server
~TRANSACTION
Transaction code to be executed
<<Your transaction code>>
~NOHEADEROKCODE
Hide transaction launcher
1
~GENERATEDYNPRO
Enable screen html generator.
1
~WEBGUI_SIMPLE_TOOLBAR
This simplifies toolbar.
137
~SINGLETRANSACTION
User only could access to transaction defined by parameter ~TRANSACTION.
1
~WEBGUI
Enables a set of html properties to get a better UX.
1
Hope this helps,
Kind regards!

The tabs have been moved to the top of the screen. I want to move them to the bottom like before. I am having a continuous battle with my drop down webcamera command box dropping over my tabs.

The Firefox tabs used to be at the bottom of my screen. Now they are at the top and as I open more sites the tabs walk from left to right across the top. There comes a point where the pointer command triggers a drop down web camera box to appear. This box does not disappear quickly nor can I can access to the tabs under the camera command box. No, I can move the camera command box as then it is in the way on either the right or left hand side of the screen impacting other commands.

For some reason it's the new FF default. Follow this menu chain to toggle it off. 
For Mac: 
View | Toolbars | Tabs on Top. 
For Win: 
Control-Click on any empty area of the Tab Strip to bring up the Customize Toolbar window. 
Click Tabs on Top. 
Now is also a good time to move the Home, Refresh and Stop icons back over to the left. Click Customize ... , grab them, drag them over, click Done. 
Cheers.

Script command 'BOX WIDTH ...' TAKES NO EFFECT

Similar Messages

Maybe you are looking for