Script command

Hello All,
Please let me know the below script command how to make and how to debug this command.
Below text in the Standard text.
e.g. /: SIP_TABLE STAB_01
Thanks in advance.
Regards
Vikas

Looks like this is a text element in SAP script and if so it will be called using WRITE_FORM from print program.
You could activate the SAP Script debugging from SE71==> Utilities==>Activate debugger.
Furter you could debug the script and reach your text elements for values.
or
Putting one breakpoint @ the write form of this element and check the values which are used in this element.
If it is a standard text you need to add prefix as INCLUDE for printing. Above mentioned debugg will take you to that standard text.
Hope this helps you.
~thomas.
Message was edited by: Thomas Mann

Similar Messages

Report script command equivalent for @relative calculation command

HI ,
We have a calculation script which has a fix statement like below :
FIX( Grade, "w/o LO", "Line Options", AtLaunch, @DESCENDANTS("470.92"), @DESCENDANTS("Price Item"), @RELATIVE("Total Region", 0) )
We are trying to make a reportscript which gives us the format of the set of database being calculated.
So we are tranforming the above calc script commands into equivalent report script commands. We are struck with the @Relative command.
Can somebody tell us what is the equivalent report script command for @Relative calculation script function.
Regards
OKU

There's no direct analogue, but you can use the <LINK command along with <DESCENDANTS and <LEV to get pretty close. See: http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_esb_techref/rwriter/link.htm
JExport (if pre 9.3) or DATAEXPORT (if 9.3 or greater) may also be options and will in fact allow @RELATIVE to be used.
Regards,
Cameron Lackpour

Report script command to get all Level 0 members of a given member

Hi,
Is there any Report script command to get all Level 0 members of a given member (Parent)? (very similar to @RELATIVE (mbrName, 0) in Calc Scripts).
<DIMBOTTOM gives all the level 0 members in the dimension.
There is a command called
<LEAVES mbrName
This works only for ASO.
Is there anything similar for BSO?
Appreciate your thoughts.
Thanks,
Ethan.
Edited by: user11397030 on Dec 15, 2009 11:50 AM
Edited by: user11397030 on Dec 15, 2009 11:51 AM

from my blog on report scripts at
http://glennschwartzbergs-essbase-blog.blogspot.com/2008_07_01_archive.html
Third, there is a command to stay away from, its DimBottom. [edited] Like @CURRMBR in calc scripts, DimBottom is one of those commands that is very slow. If you use Query designer to create a report, it uses a better way. It uses the link command. In sample.basic to get all level 0 products it uses
<Link ((<LEV("Product", 0)) AND ( <DESC("Product")))

How to call unix script/command in ODI

Hello Gurus,
Please let me know how to call unix script/command in ODI?
Thanks
Shridhar

you can call shell script using the OS command found in Package.
Step 1. Drag the OS Command in the Packgae
Step 2. In the Text mentiond call the script say for ex sh /opt/path/script.sh
Step 3. Execute.
Note : Make sure the User through which ODI is triggering does have the required permission to execute shellscript , also always provide the full path , since scripts are execute from the oracldi/bin folder so its necessary to provide the complete path of the script location.
Hope this helps.

HELP - "Error in script command 1: InstallApp "

I've just upgraded my ipod to a jailbroken 1.1.4 and installed summerboard. But whenever I want to add a new application...i get the following message:
"Error in script command 1: InstallApp"
What do I've to do???

Sorry, these forums are only for supporting Apple's products - a jailbroken iPod is off limits.
Use Google.
Scott

Is there a DIAdem Script command that can automatically create folders/directories in Windows?

Hi there!
I need to automatically create folders/directories in the Windows file system? Is there a DIAdem Script command to do this (like the way you do it in DOS/Unix or even Matlab (mkdir command)? Thanks!

Hi,
there are two ways to create folders within a DIAdem script:
Call FolderCreate("d:\New Folder")
Dim fso
Set fso = CreateObject("Scripting.FileSystemObject")
Call fso.CreateFolder("d:\New Folder 2")
Christian

Regarding SAP SCRIPT COMMAND

Hi all,
Can anyone tell me the which command i use in sap script for &itab-kunnr&.
so many command are there so please suggest me...........
and give command tutorial or link also....
Zenithi.

hi
good
check out all these SAP SCRIPT commands
New-page <page name> Prints the text following this command on a new page (when a page name is specified then that page is taken as the next page)
Protect .. Endprotect This acts like a conditional page break. Putting the text within this command prevents the breaking of the text across multiple pages. If there is not enough space for the entire paragraph to be printed in the space remaining on the page, then the entire paragraph is printed on the next page
Box <xpos> <ypos> <width> <height> <frame> <intensity>
Position <xorigin> <yorigin> <window> <page>
Size <width> <height> <window> <page>
The BOX command draws a box as per the specifications. The x y co-ordinates are for the upper left corner relative to the values in the position command.
POSITION command is used to set the x y co-ordinates with respect to the start position of the window.
SIZE command is used to specify the size of the box that we need to draw.
Varying these parameters also helps to draw a line instead of a box.
IF .. END IF This allows the conditional printing of the text on the output document. The various conditional operators that can be used are as follows
= EQ Equal to
< LT Less than
> GT Greater than
<= LE Less than or equal to
>= GE greater than or equal to
<> NE not equal to
The logical operators that can be used are as follows
NOT, AND, OR
reward point if helpful.
thanks
mrutyun^

Using a script command to refresh external data?

I can't seem to find the script command to refresh external data before I move it into the Data Portal. Can anyone point me in the right direction?
Also, is there a way to run this script without opening DIAdem, selecting the script and running it? I would like to generate a web page that is updated every X hours with a report generated with a DIAdem script.
Thanks
Todd

Hi toddho,
What do you mean by "refresh the external data before I move it into the Data Portal"? Do you mean change or add data to the external data file with VBScript? Or do you mean refresh the display of data files and folders in the NAVIGATOR? Or do you mean something else? I'm afraid I can't seem to make sense of this request yet.
If you want to run a DIAdem VBScript from an external program, such as a java script activated in a web page, then you should open an ActiveX connection to DIAdem and send it commands. This can be done in such a way that DIAdem is invisible, but you must have a DIAdem instance running in order to execute a VBScript with DIAdem commands or variables in it. DIAdem has 2 ActiveX servers that are well documented in the Help system:
DIAdem.ToDataSheet
DIAdem.ToCommand
Brad Turpin
DIAdem Product Support Engineer
National Instruments

I get the error message like this "open script command failed"

Dear Support,
from subject detail
my scripts in VBA path are failed
I need to edit that scripts again but Etester sent the error message that
"open script command failed"
"(Invalid procedure call or argument)"
and then I press enter "ok" button
Right now I cann't to see my script anymore because it has been invisibled my script already ,,,,, I can't to edit anything , can't to copy and paste sub script from another code
Please suggest me about this ,,,How to open it for edit that script ? I don't want to make it new.
Thanks,
Por
Edited by: user10668951 on Dec 2, 2008 6:37 PM

Hi,
I am getting the same pboblem right now,did you get the solution for this pboblem?

All sap script commands are supported by smartform?

hi experts
pls answer me
all sap script commands are supported by smartform?
rewads apply.
thanks.
naresh.

pls chk the link below:
http://www.geekinterview.com/question_details/37873
1.SCRIPTS ARE CLIENT DEPENDENT
SMARTFORMS ARE CLIENT INDEPENDENT
2.WE CANNOT ADD COLORS IN SCRIPTS
WE CAN ADD COLORS IN SMARTFORMS
3.WE CANNOT GET THE FUNCTION MODULE WHEN WE ACTIVATE THE PROGRAM
WHEN WE ACTIVATE THE PROGRAM WE GET FUNCTION MODULE
4.WE CAN WRITE ENTIRE CODE IN SMARTFROM ITSELF
with luck,
pritam.

Which .bash does "do shell script" commands use?

The "do shell script" command uses the Bourne shell "sh". But I am curious to know which .bash it uses to define the shell environment variables.
I ran into a problem installing a third-party unix program which required new environment variables to be defined in order to execute. Defining these variables and executing this program from the terminal worked fine.
But executing it within a "do shell script" command in an Applescript - the program died silently because the environment variables it required were not defined in the shell Applescript uses. It appears to invoke a new shell which does not inherit the environment variables defined in your home user shell.
(I found this out by 'do shell script "set"' which listed the environment variables Applescript knows about - the ones I defined for the third-party program were not listed).
A "brute force" way of fixing this is to pass the environment variables directly:
do shell script "export THIRDPARTY_ENVVAR=blah; /usr/sbin/thirdpartyprogam"
This works but not exactly elegant, particularly when you need to pass a number of variables.
So - any better ways to do this? Can I edit the .bash Applescript uses, and where is it?
Thanks.

Another option that might work for you... if you are saving/distributing your AppleScript as an "Application bundler" is to group all your shell env. variables and other commands into a separate shell script file. Then include the shell script inside your app bundle. Locate the shell script at runtime and run that with "do shell script".
For example, create "myShellScript.sh"
#!/bin/sh
export THIRDPARTY_ENVVAR=blah
# ... more variable declarations..
/usr/sbin/thirdpartyprogam
# ... more shell commands...
Store the shell script file inside your AppleScript bundle's Contents -> Resources folder (remember to make the shell script executable). Then your AppleScript can find your shell script at runtime and execute it like this:
set ssPath to quoted form of POSIX path of (path to resource "myShellScript.sh")
set stdout to do shell script ssPath
Steve

Wait for a "do shell script" command to finish

i have an applescript that has to call a few external applications. i currently do this by setting the exact syntax of the external command in a string variable, then issue a "do shell script cmd" (seen many examples across the net using this standard)
my applescript continues beyond these commands. how do i set the applescript to either wait for the above external command to finish, or not?
regards
jingo_man

Usually AppleScript will wait for a shell script to complete before it continues, but adding an ampersand (&) at the end of the shell script command will make it run in the background, which allows the AppleScript to continue. See Technical Note 2065: do shell script in AppleScript for more information.

Beginner question - testing for null string from shell script command

I'm trying to test the result of a shell script command. I want to put out a message if the result is a null string. At present I get this applescript error "The command exited with a non-zero status"
I'm sure this is a simple question ... but I can't figure out how to do it. Help!

You can use try clause for the problem:
set _result to ""
try
set _result to do shell script "/blah/andblah"
end

Script command to Save File From Portfolio

This is the script command to save as, app.execMenuItem("SaveAs")
What's the script command to Save File From Portfolio?
Do you know?

Hi,
We were looking for that before: Exporting XFA PDF from within Portfolio
Paul exposed the menu items and while I was hopefully that app.execMenuItem("ExtractFilesFromPackage"); would work - but it didn't.
It transpires that only a few of the app.execMenuItem commands are unrestricted and available.
So we continue to use the "open"button on the top right of the portfolio to open the file out of the portfolio:
I think you are stuck with that,
Niall

Complex shell script command

HI Experts
can anybody know what this complex shell script command is doing .. i know its looking for some character at some point but exact explanation will be good for learning.
egrep "^.{292}[CFOPRA][EPR]$" dn.dat
Thanks

A simple example can often demonstrate how things work:
# cat sample.dat
xABCDE1
xABCDE2
ABCDE3
ABCDE4
xDBCEA5
xDBCEA6
# egrep "^.A" sample.dat
xABCDE1
ABCDE4
Above matches lines that begin with any character followed by an "A".
# egrep "^.{2}A" sample.dat
xABCDE2
Above matches lines that begin with any 2 characters followed by an "A".
# egrep "^.{2}[AD]" sample.dat
xABCDE2
xDBCEA6
Above matches lines that begin with any 2 characters followed by an "A" or D".
# egrep "^.{6}[345]$" sample.dat
ABCDE4
xDBCEA5
Above matches any lines ending with "3", "4" or "5",
provided it's the 7th character.
# egrep "^.{5}[345]$" sample.dat
ABCDE3
Above matches any lines ending with "3", "4" or "5",
provided it's the 6th character.
# egrep "^.{6}[EA][26]$" sample.dat
xABCDE2
xDBCEA6
Above matches any lines ending with combinations of "E2, E6, A2, A6",
provided the combination starts at character position 7.
{code}

Script command

Similar Messages

Maybe you are looking for