SCRIPT_LOAD_ERROR:Failed to load script

Hi,
I have IPCC 3.5(3) and I wanted to extend some features of existing script. So I made a new one and add features like:
- informing the caller of his/her position in the queue
- the caller can leave a message and that message will be sent to the e-mail
- adding holidays and so on.
When I wanted to to add the application for that script, I got the following message:
Server reported error while loading the application. Please check the log for details.
And the part of the log associated with this issue is in attachment.
As I can see it says there is no java Class, but how I can check that? Or what should I do to resolve this problem?
I was looking for error code for MIVR-APP_MGR and suggested solutions are: verify and update the configuration or restart the CAR server. I tried to restart CRA Engine service, but without any success. Did anyone have some similar issue?
I would appreciate any help.
Best regards,
Jelena

Looks like you may have few errors in your script. Check to see if you can load your previous or any other working script on the same application.
I assume you are on express.

Similar Messages

Error: Failed to load script file; java.lang.ArrayIndexOutOfBound.Exception: 3184

Script editor was working find when I last used it last week. Tried to open a script today to make some changes and now I'm getting this error message. I have uninstalled and re-installed editor, checked the compatibility mode and it wont open the script. any ideas out there what the problem could be? need some trouble shooting help.
Error:
failed to load script file: java.lang.ArrayIndexOutOfBound.Expception: 3184
Thanks
Lora

Hmmm....   I haven't seen that, but I can tell you what I would do if I were you. This is kind of drastic, but the alternative may be a workstation reimage.
Open the windows control panel, and open the add/remove programs snap in.
Uninstall the CRS editor.
Uninstall all the JRE instances you have. They may be listed as something like Java (TM) update....   or they may appear as J2SE Runtime....   Check in the J's (it's alphabetical) and uninstall all of them.
Reboot the machine.
Download and reinstall Java 1.6.0.17   (This is what's running on my workstation right now, and it works with the editor).
Reinstall the CRS editor
Reboot the machine
Try it and see if it behaves. If it doesn't, you may need to rebuild the whole thing.

Failed to load script class for script ...

We are trying to run a script in Thin Client mode, recorded in Oracle Functional Testing,
But get: "Failed to load script class for script ...".
Anyone has any tips for what we should check to solve this problem?

Hi,
There was no option for "java client", and it was set to "thin client" by default.
Anyway, changing the setting back and forth between "thick client" and "thin client" solved the problem.
Thanks.

UCCX Failed to load script

Hello,
i am relatively new to uccx and scripts. i copied some (many) scripts from the customer i am working with to use in my lab for testing purposes. We both are running uccx 8.5.1.11003-32 and all the scripts seem to open except 1.
When trying to open the script in cisco unified cxx editor ( ver 8.1(1.0) ) i get the following error :
Failed to load script file; com.cisco.ScriptException: Failed to load script: \default\scriptname.aef; nested exception is: java.lang.ClassNotFoundException: org.jdom.Document
Any ideas ?? i would really like to get this lab working and any help would be much appreciated
Thank you in advance

Hi, the script probably contains a reference to the jdom library, ask the customer about the version they are using and get it at jdom.org.
G.
Sent from Cisco Technical Support Android App

FireFox images not loading in local folders (firebug error-Failed to load given URL)

I am having difficulty when developing websites in local folders (Windows7 computer). The webpages I make are showing images in IE9 & Chrome but not FireFox (nor Safari nor Opera).
In FireFox I get Firebug "Failed to load given URL" prompt.
I am using html5 & external linked css stylesheet & the html/html5 & css code validates.
I have tried using rel path ie images/image.gif & absolute path references ie C:/RPD_Programming/RPD WEB/amwcsnew/index.html
and have tried using % to eliminate whitespace in references but I cannot get FireFox to display images!!
This has been a problem for me for around 2 weeks now & is very frustrating. Some website code/templates I have downloaded from the internet display the websites properly (ie load images fine) when I open them locally in FireFox. Why does my code not allow the images to load in FireFox (paths/permissions/other issue??). How can I fix this?
Here is example css & html5 not displaying images from local directory in FireFox (fine in IE9 & Chrome):
style.css
/* CSS Document */
/*Basic Reset*/
margin:0;
padding:0;
html{
/* HTML5 display-role reset for older browsers */
article, aside, details, figcaption, figure,
footer, header, hgroup, menu, nav, section {
display: block;
body{
width:1200px;
margin:0 auto;
header{
height:450px;
background:url("C:/RPD_Programming/RPD WEB/amwcsnew/images/header.gif");
background-repeat:no-repeat;
#mid{height:750px;
background:url('C:/RPD_Programming/RPD_WEB/amwcsnew/images/mid.gif')no-repeat;
footer{height:286px;
background:url('C:/RPD_Programming/RPD WEB/amwcsnew/images/footer.gif')no-repeat;
index.html
<!doctype html>



<html lang="en" class="no-js">
<head>

<meta charset="utf-8">
<title>amwcs-new</title>
<meta name="description" content="amwcs">
<meta name="author" content="rpd">


<link rel="shortcut icon" href="/favicon.ico">

<link rel="apple-touch-icon" href="/apple-touch-icon.png">



<link rel="stylesheet" href="css/style.css?v=2">


<script src="js/modernizr-1.6.min.js"></script>


</head>


<body>




<header>

<hgroup>
<h1>amwcs</h1>
<h2>tagline</h2>
</hgroup>

<nav>
<ul>
<li><a href="#">Home</a></li>
<li><a href="#">About</a></li>
<li><a href="#">Services</a></li>
<li><a href="#">Contact</a></li>
</ul>
</nav>
</header>

<div id="mid">

<section class="hs1">


<p>Some content...</p>

<h2>Demonstrating EM and STRONG</h2>

<p><strong>This text will have more importance (SEO-wise and contextually)</strong></p>

<p><b>This text has visual importance but has no contextual or SEO importance</b></p>

<p>This is a <em>very</em> colloquial expression.</p>


</section>

<section class="hs2">
<h1>This is another section</h1>
<p>This is some dummy content</p>
</section>
</div>



<footer >
<p>copyright © year</p>
</footer>


<script src="http://ajax.googleapis.com/ajax/libs/jquery/1.4.4/jquery.min.js"></script>
<script>!window.jQuery && document.write(unescape('%3Cscript src="js/jquery-1.4.4.min.js"%3E%3C/script%3E'))</script>


<script src="js/general.js"></script>


<script>
var _gaq = [['_setAccount', 'UA-XXXXX-X'], ['_trackPageview']];
(function(d, t) {
var g = d.createElement(t),
s = d.getElementsByTagName(t)[0];
g.async = true;
g.src = ('https:' == location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js';
s.parentNode.insertBefore(g, s);
})(document, 'script');
</script>
</body>
</html>
I am most grateful for help & look forward to replies & fixing this-thanks
NB
Is there a FireFox guide/manual in pdf format available anywhere? I have not found one yet & a FireFox reference might be useful!

You need to use file:// as the protocol instead of C:/. The latter may never work (C:\ might).
Where is the main HTML located ?
Easiest if to store the images in a sub folder of the location because you can't go back via ../ beyond that root location for security reasons.
See:
*http://kb.mozillazine.org/Links_to_local_pages_do_not_work

Linux - Oracle - Crystal Report Server XI : Error in File Report1: Failed to load database information.

I am using Crystal Reports Server XI on Linux Server with Oracle Server 10g.
I did install Oracle Client on Report Server and config Oracle SID in tnsnames.ora also. It works well with tnsping command. Then, I published a report which was created in Crystal Reports developer on this server.
When I preview the report on Report Server. I got the following error message:
Error in File Report1: Failed to load database information.
Try to fix the problem I ran web Central Management Console -> Objects ->Report1->Process -> Database and set there the following parameters:
Database driver: Oracle
Server: servers_host_name
Database: (tried both ORACLE_SID and tns_name)
User: oracle_user_name
Password: oracle_pw
It still got the same problem.
I will appreciate any help.
Tham.

I was having a similar problem in Crystal Reports Server 2008 v1, and had to install the full client to resolve it, which I didn't like. I poked around some, and was able to get the Instant Client working with a few minor changes. Note that I tried it only with the 32-bit Instant Client even though I was on a 64-bit system because that was what SAP recommended when I talked to them.
The changes I had to do was initialize the Oracle environment variables (the instant client doesn't have a script to do this for you) and to create a soft-link which is included in the full client, but not in the instant client.
To setup the environment variables I created a file called env.sh and put it in /opt/crystal/bobje/setup/oracle/, where /opt/crystal was my install path. This ensured that it got called by the /opt/crystal/bobje/setup/env.sh script which runs as part of the System init scripts to initialize the environment. The following is what I put in my file (again for the 32-bit 11g R2 instant client):
     export ORACLE_SID=summitdb
     export ORACLE_HOME='/usr/lib/oracle/11.2/client'
     export ORACLE_BASE='/usr/lib/oracle/'
     export TNS_ADMIN='/usr/lib/oracle/11.2/client/network/admin'
     export PATH="$:/usr/lib/oracle/11.2/client/bin"
     export LD_LIBRARY_PATH="$$/usr/lib/oracle/11.2/client/lib"
After that, I created the missing soft link using this command:
     ln -s "$/lib/libclntsh.so.11.1" "$/lib/libclntsh.so.10.1"
Once I had done those two things, and restarted the service using the /etc/init.d script, it worked fine.

[Solved] Ncmpcpp Visualizer Failed To Load (Blank)

I've install ncmpcpp and mpd and I've followed each guide to enable visualization. Unfortunately I don't know what have cause it to failed to load.
Everytime I hit '9' to reveal it, it just showing blank terminal..for your information all of my songs just played fine.
I used config from one of our member via this thread. here is my .ncmpcpp/config:
##### connection settings #####
mpd_host = "localhost"
mpd_port = "6600"
mpd_music_dir = "/home/drfreddy/Music"
mpd_connection_timeout = "5"
mpd_crossfade_time = "1"
mpd_communication_mode = "notifications" (polling/notifications)
visualizer_fifo_path = "/tmp/mpd.fifo"
visualizer_output_name = "my_fifo"
visualizer_sync_interval = "1"
visualizer_type = "wave" (spectrum/wave)
system_encoding = "utf-8"
##### delays #####
playlist_disable_highlight_delay = "5"
message_delay_time = "4"
# Playlist
song_columns_list_format = "(7f)[cyan]{l} (25)[blue]{a} (40)[red]{t|f} (30)[magenta]{b}"
song_list_format = "{$3[%l]$9} {$5%a$9} - {$2%t$9} - {$6%f$9}"
now_playing_prefix = "$b$1» "
now_playing_suffix = "$/b"
playlist_display_mode = "columns" (classic/columns)
autocenter_mode = "yes"
centered_cursor = "yes"
cyclic_scrolling = "yes"
mouse_list_scroll_whole_page = "no"
# # Bars
song_status_format = "{%a - }{%t - }{%b}"
progressbar_look = "─╼ "
titles_visibility = "no"
header_visibility = "no"
statusbar_visibility = "yes"
# Browser
browser_playlist_prefix = "$2plist »$9 "
browser_display_mode = "classic" (classic/columns)
# Colors
discard_colors_if_item_is_selected = "yes"
header_window_color = "default"
volume_color = "cyan"
state_line_color = "white"
state_flags_color = "green"
main_window_color = "default"
color1 = "cyan"
color2 = "black"
main_window_highlight_color = "red"
progressbar_color = "cyan"
statusbar_color = "white"
active_column_color = "red"
visualizer_color = "cyan"
# Others
song_window_title_format = "MPD: {%a > }{%t}|{%f}"
search_engine_display_mode = "columns" (classic/columns)
follow_now_playing_lyrics = "yes"
display_screens_numbers_on_start = "no"
user_interface = "alternative" (classic/alternative)
And here is my .mpdconf:
# An example configuration file for MPD
# See the mpd.conf man page for a more detailed description of each parameter.
# Files and directories #######################################################
# This setting controls the top directory which MPD will search to discover the
# available audio files and add them to the daemon's online database. This
# setting defaults to the XDG directory, otherwise the music directory will be
# be disabled and audio files will only be accepted over ipc socket (using
# file:// protocol) or streaming files over an accepted protocol.
music_directory "/home/drfreddy/Music/"
# This setting sets the MPD internal playlist directory. The purpose of this
# directory is storage for playlists created by MPD. The server will use
# playlist files not created by the server but only if they are in the MPD
# format. This setting defaults to playlist saving being disabled.
playlist_directory "~/.mpd/playlists"
# This setting sets the location of the MPD database. This file is used to
# load the database at server start up and store the database while the
# server is not up. This setting defaults to disabled which will allow
# MPD to accept files over ipc socket (using file:// protocol) or streaming
# files over an accepted protocol.
db_file "~/.mpd/database"
# These settings are the locations for the daemon log files for the daemon.
# These logs are great for troubleshooting, depending on your log_level
# settings.
# The special value "syslog" makes MPD use the local syslog daemon. This
# setting defaults to logging to syslog, otherwise logging is disabled.
#log_file "~/.mpd/log"
# This setting sets the location of the file which stores the process ID
# for use of mpd --kill and some init scripts. This setting is disabled by
# default and the pid file will not be stored.
#pid_file "~/.mpd/pid"
# This setting sets the location of the file which contains information about
# most variables to get MPD back into the same general shape it was in before
# it was brought down. This setting is disabled by default and the server
# state will be reset on server start up.
#state_file "~/.mpd/state"
# The location of the sticker database. This is a database which
# manages dynamic information attached to songs.
#sticker_file "~/.mpd/sticker.sql"
# General music daemon options ################################################
# This setting specifies the user that MPD will run as. MPD should never run as
# root and you may use this setting to make MPD change its user ID after
# initialization. This setting is disabled by default and MPD is run as the
# current user.
user "drfreddy"
# This setting specifies the group that MPD will run as. If not specified
# primary group of user specified with "user" setting will be used (if set).
# This is useful if MPD needs to be a member of group such as "audio" to
# have permission to use sound card.
#group "nogroup"
# This setting sets the address for the daemon to listen on. Careful attention
# should be paid if this is assigned to anything other then the default, any.
# This setting can deny access to control of the daemon.
# For network
bind_to_address "any"
# And for Unix Socket
#bind_to_address "~/.mpd/socket"
# This setting is the TCP port that is desired for the daemon to get assigned
# to.
port "6600"
# This setting controls the type of information which is logged. Available
# setting arguments are "default", "secure" or "verbose". The "verbose" setting
# argument is recommended for troubleshooting, though can quickly stretch
# available resources on limited hardware storage.
log_level "default"
# If you have a problem with your MP3s ending abruptly it is recommended that
# you set this argument to "no" to attempt to fix the problem. If this solves
# the problem, it is highly recommended to fix the MP3 files with vbrfix
# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
# point gapless MP3 playback can be enabled.
gapless_mp3_playback "yes"
# Setting "restore_paused" to "yes" puts MPD into pause mode instead
# of starting playback after startup.
#restore_paused "no"
# This setting enables MPD to create playlists in a format usable by other
# music players.
#save_absolute_paths_in_playlists "no"
# This setting defines a list of tag types that will be extracted during the
# audio file discovery process. The complete list of possible values can be
# found in the mpd.conf man page.
#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
# This setting enables automatic update of MPD's database when files in
# music_directory are changed.
auto_update "yes"
# Limit the depth of the directories being watched, 0 means only watch
# the music directory itself. There is no limit by default.
#auto_update_depth "3"
# Symbolic link behavior ######################################################
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links outside of the configured music_directory.
#follow_outside_symlinks "yes"
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links inside of the configured music_directory.
#follow_inside_symlinks "yes"
# Zeroconf / Avahi Service Discovery ##########################################
# If this setting is set to "yes", service information will be published with
# Zeroconf / Avahi.
#zeroconf_enabled "yes"
# The argument to this setting will be the Zeroconf / Avahi unique name for
# this MPD server on the network.
#zeroconf_name "Music Player"
# Permissions #################################################################
# If this setting is set, MPD will require password authorization. The password
# can setting can be specified multiple times for different password profiles.
#password "password@read,add,control,admin"
# This setting specifies the permissions a user has who has not yet logged in.
#default_permissions "read,add,control,admin"
# Input #######################################################################
input {
plugin "curl"
# proxy "proxy.isp.com:8080"
# proxy_user "user"
# proxy_password "password"
# Audio Output ################################################################
# MPD supports various audio output types, as well as playing through multiple
# audio outputs at the same time, through multiple audio_output settings
# blocks. Setting this block is optional, though the server will only attempt
# autodetection for one sound card.
# See <http://mpd.wikia.com/wiki/Configuration#Audio_Outputs> for examples of
# other audio outputs.
# An example of an ALSA output:
audio_output {
type "alsa"
name "Beats by Dr. Freddy"
device "hw:0,0" # optional
format "44100:16:2" # optional
mixer_type "software" # optional
mixer_device "default" # optional
mixer_control "PCM" # optional
mixer_index "0" # optional
# An example of an OSS output:
#audio_output {
# type "oss"
# name "My OSS Device"
## device "/dev/dsp" # optional
## format "44100:16:2" # optional
## mixer_type "hardware" # optional
## mixer_device "/dev/mixer" # optional
## mixer_control "PCM" # optional
# An example of a shout output (for streaming to Icecast):
#audio_output {
# type "shout"
# encoding "ogg" # optional
# name "My Shout Stream"
# host "localhost"
# port "8000"
# mount "/mpd.ogg"
# password "hackme"
# quality "5.0"
# bitrate "128"
# format "44100:16:1"
## protocol "icecast2" # optional
## user "source" # optional
## description "My Stream Description" # optional
## url "http://example.com" # optional
## genre "jazz" # optional
## public "no" # optional
## timeout "2" # optional
## mixer_type "software" # optional
# An example of a recorder output:
#audio_output {
# type "recorder"
# name "My recorder"
# encoder "vorbis" # optional, vorbis or lame
# path "/var/lib/mpd/recorder/mpd.ogg"
## quality "5.0" # do not define if bitrate is defined
# bitrate "128" # do not define if quality is defined
# format "44100:16:1"
# An example of a httpd output (built-in HTTP streaming server):
#audio_output {
# type "httpd"
# name "My HTTP Stream"
# encoder "vorbis" # optional, vorbis or lame
# port "8000"
# bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
## quality "5.0" # do not define if bitrate is defined
# bitrate "128" # do not define if quality is defined
# format "44100:16:1"
# max_clients "0" # optional 0=no limit
# An example of a pulseaudio output (streaming to a remote pulseaudio server)
#audio_output {
# type "pulse"
# name "My Pulse Output"
## server "remote_server" # optional
## sink "remote_server_sink" # optional
## Example "pipe" output:
#audio_output {
# type "pipe"
# name "my pipe"
# command "aplay -f cd 2>/dev/null"
## Or if you're want to use AudioCompress
# command "AudioCompress -m | aplay -f cd 2>/dev/null"
## Or to send raw PCM stream through PCM:
# command "nc example.org 8765"
# format "44100:16:2"
## An example of a null output (for no audio output):
#audio_output {
# type "null"
# name "My Null Output"
# mixer_type "none" # optional
# This setting will change all decoded audio to be converted to the specified
# format before being passed to the audio outputs. By default, this setting is
# disabled.
#audio_output_format "44100:16:2"
# If MPD has been compiled with libsamplerate support, this setting specifies
# the sample rate converter to use. Possible values can be found in the
# mpd.conf man page or the libsamplerate documentation. By default, this is
# setting is disabled.
#samplerate_converter "Fastest Sinc Interpolator"
# Normalization automatic volume adjustments ##################################
# This setting specifies the type of ReplayGain to use. This setting can have
# the argument "off", "album" or "track". See <http://www.replaygain.org>
# for more details. This setting is off by default.
#replaygain "album"
# This setting sets the pre-amp used for files that have ReplayGain tags. By
# default this setting is disabled.
#replaygain_preamp "0"
# This setting enables on-the-fly normalization volume adjustment. This will
# result in the volume of all playing audio to be adjusted so the output has
# equal "loudness". This setting is disabled by default.
#volume_normalization "no"
# MPD Internal Buffering ######################################################
# This setting adjusts the size of internal decoded audio buffering. Changing
# this may have undesired effects. Don't change this if you don't know what you
# are doing.
#audio_buffer_size "2048"
# This setting controls the percentage of the buffer which is filled before
# beginning to play. Increasing this reduces the chance of audio file skipping,
# at the cost of increased time prior to audio playback.
#buffer_before_play "10%"
# Resource Limitations ########################################################
# These settings are various limitations to prevent MPD from using too many
# resources. Generally, these settings should be minimized to prevent security
# risks, depending on the operating resources.
#connection_timeout "60"
#max_connections "10"
#max_playlist_length "16384"
#max_command_list_size "2048"
#max_output_buffer_size "8192"
# Client TCP keep alive #######################################################
# For clients connected by TCP on supported platforms.
# Allows detection of dangling connections due to clients disappearing from
# the network without closing their connections.
# This is not usually necessary but can be useful in cases such as wifi connectected
# clients that go in and out of network range or turn off wifi without closing their
# connections. Combined with low max_connections this can soon cause clients to not
# be able to connect.
# Enable tcp keepalive on new client connections (default is "no")
#tcp_keep_alive "no"
# Time in seconds since the last communication on the connection and before
# the keepalive probing is started. (default is 7200 seconds)
#tcp_keep_alive_idle "7200"
# Interval in seconds between keepalive probes, once a probe started.
# (default is 75 seconds)
#tcp_keep_alive_interval "75"
# Number of failed probes before the connection is pronounced dead and
# the connection is closed. (default is 9 times)
#tcp_keep_alive_count "9"
# Character Encoding ##########################################################
# If file or directory names do not display correctly for your locale then you
# may need to modify this setting.
#filesystem_charset "UTF-8"
# This setting controls the encoding that ID3v1 tags should be converted from.
#id3v1_encoding "ISO-8859-1"
# SIDPlay decoder #############################################################
# songlength_database:
# Location of your songlengths file, as distributed with the HVSC.
# The sidplay plugin checks this for matching MD5 fingerprints.
# See http://www.c64.org/HVSC/DOCUMENTS/Songlengths.faq
# default_songlength:
# This is the default playing time in seconds for songs not in the
# songlength database, or in case you're not using a database.
# A value of 0 means play indefinitely.
# filter:
# Turns the SID filter emulation on or off.
#decoder {
# plugin "sidplay"
# songlength_database "/media/C64Music/DOCUMENTS/Songlengths.txt"
# default_songlength "120"
# filter "true"
audio_output {
type "fifo"
name "my_fifo"
path "/tmp/mpd.fifo"
Can somebody tell me how to enable the visualization? Am I missing something?
Last edited by Archer1X (2013-02-07 10:48:34)

Nevermind..got it working after configured that I have to put this line in .ncmpcpp/config:
visualizer_look = "+|"
Anybody have a better look for the visualizer?
I also have tried several figures like "=="..hmm..kinda like it..
Last edited by Archer1X (2013-02-07 10:49:13)

Slew of bugs (similar to failed to download script thread)

This is a bug report listing all the problems I’ve encountered with Story and what I was doing when they occurred:
I logged into Adobe Story using the AIR application in online mode.
I attempted to open a script, which was originally imported from Movie Magic Screen Writer vs. 6 and had been edited several times in Story prior to this error with no problems. It has also been shared but only for review.
I received an error reporting that the script was unable to be downloaded.
I opened another script and worked on it with no errors.
I tried to open the original script again.
It opened.
Upon first scrolling of the script I received an error that Adobe Story encountered a fatal error and would have to be shut down. (Sorry I did not keep the detailed report)
Upon restart I attempted to open the script again, in online mode.
Script opens but there is no text.
I set Adobe AIR to offline mode and open script.
Script opens with text, but formatting is screwy with seemingly random spaces removed. Reads like this:
A man uses abetaversion of a program. He expereinceserrors with the program.
This is consistent every time I open this particular script: in online mode nothing is there, in offline mode formatting is a mess.
I have one other script in Story and it doesn’t seem to have these issues, however, I was looking for where Story stores offline scripts on my computer for backup purposes due to the above error and was surprised to find no files in the “Adobe Story” folder under “Documents”. I also found no option to select a location to save files to in Story. For backup of critical work this is a required feature. I have to be able to control where my material is stored and do so locally so that if there are fatal errors like above I can recover from a known good locally saved file.
This concerned me so I attempted to export to Movie Magic Screen Writer. I was alarmed to find no export to SCW option after having imported from it (I think a claim of 3rd party interoperability is pretty absurd if Story can’t export to this popular program). I exported as .txt to try and preserve a backup of work done in Story. This .txt file opens using the Notepad application and is formatted correctly there, but fails to import properly into Movie Magic (no text in script at all).
I perform a select all and copy in Story of the script.
I perform a paste in Movie Magic.
Formatting of text is messy in Movie Magic similar to the above problem.
Upon immediate return to Story, formatting of this script is also messy and matches exactly the formatting in Movie Magic. Only a select all and copy have been performed on this script. This error is consistent and hapens every time. I have a duplicate copy of this script in its original form in Story. I did a Save AS to create a new script that I used for the above testing and resulting erorrs.
I hope that you can resolve these issues, but I will only be using the program for sharing capabilities until final release from now on, except to test solutions to this problem if you have them. While I understand this is a beta version, a bug this critical that renders the application useless without a clear means of recoverable locally stored backup ensure that the program is not worth using for editing at this stage.

Update 2:
Thought I found work around, made the problem worse in the end but it still might be useful to some:
Placed AIR app in offline mode, told Story to “Lock Script”.
Opened script in offline mode, text garbled.
While still in the script (authoring or editing mode or whatever) placed AIR app into online mode.
Told Story not to unlock script when prompted.
After a quick load, script appears properly text is no longer garbled.
Export as .txt file.
Export completes buts Story encounters fatal error and has to restart. Detailed report of error:
<ErrorReport date="Thu, 22 Oct 2009 22:18:43 GMT">
<session clientVersion="" userName="null" userID="null" sessionID="null" lastSentSequence="0"/>
<documentMeta documentID="null" userRole="owner" documentVersion="0"/>
<error message="RangeError: Error #2006">null</error>
<command name="vu.editor.controllers.document::CmdSave" phase="commandEnd"/>
<platform version="WIN 10,0,32,18" playerType="Desktop" os="Windows Vista" isDebugger="false"/>
<trace></trace>
</ErrorReport>
.txt file is good, backup successful for use in other programs, so I continue to try and force Story to work.
Upon restart original errors persist.
Try above workaround this time saying “No” when prompted to lock scripts when going offline. Workaround is successful again.
Make a test edit of script in online mode.
Use standard “Save” command (not save as)
Close Script, try to reopen receive “Unable to download error”.
Attempt workaround and still receive error in offline mode.
Close and reopen AIR app.
When I place AIR offline and say “Yes” to the lock script prompt I receive the “unable to download” error even though the mode is offline.
When I say “no” script opens with no text or outline and I am not able to type anything, it is all just grey.
Checked the browser app, still receive unable to download error.
That will be all the debugging I’m doing. I was able to recover good versions of both scripts edited in Story using these methods, so I post them for others who may need help. I will however now be going back to Screen Writer.

Cannot load script for execution.

hi
iam creating the sisi package with in script task . script task was build successful . but when i was executive the ssis packages vs 2012.
it get error :Cannot load script for execution..
the code is
Microsoft SQL Server Integration Services Script Task
Write scripts using Microsoft Visual C# 2008.
The ScriptMain is the entry point class of the script.
using System;
using System.Data;
using Microsoft.SqlServer.Dts.Runtime;
using System.Windows.Forms;
using System.IO;
namespace ST_8cdbf584a74b48abb384d8f03cf42f4d.csproj
public partial class ScriptMain : Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTARTScriptObjectModelBase
#region VSTA generated code
enum ScriptResults
Success = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Success,
Failure = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Failure
#endregion
The execution engine calls this method when the task executes.
To access the object model, use the Dts property. Connections, variables, events,
and logging features are available as members of the Dts property as shown in the following examples.
To reference a variable, call Dts.Variables["MyCaseSensitiveVariableName"].Value;
To post a log entry, call Dts.Log("This is my log text", 999, null);
To fire an event, call Dts.Events.FireInformation(99, "test", "hit the help message", "", 0, true);
To use the connections collection use something like the following:
ConnectionManager cm = Dts.Connections.Add("OLEDB");
cm.ConnectionString = "Data Source=localhost;Initial Catalog=AdventureWorks;Provider=SQLNCLI10;Integrated Security=SSPI;Auto Translate=False;";
Before returning from this method, set the value of Dts.TaskResult to indicate success or failure.
To open Help, press F1.
public void Main()
byte[] dataByte = null; String errInfo = "";
try
String sDirectory = Dts.Variables["User::Directory"].Value.ToString();
String CreatePartitionFileXMLA = sDirectory + "\\partitionssales20010701to20010731.XMLA";
String ProcessPartitionFileXMLA = sDirectory + "\\partitionssales20010701to20010731.XMLA";
// Create XMLA Script
Dts.Variables["User::CreatePartitions"].Value = ReadFile(CreatePartitionFileXMLA, errInfo);
if (errInfo.Length > 0)
Dts.Log("Error while reading XMLA file: " + errInfo, 0, dataByte);
Dts.TaskResult = (int)ScriptResults.Failure;
//Process XMLA Script
Dts.Variables["User::ProcessPartitions"].Value = ReadFile(ProcessPartitionFileXMLA, errInfo);
if (errInfo.Length > 0)
Dts.Log("Error while reading XMLA file: " + errInfo, 0, dataByte);
Dts.TaskResult = (int)ScriptResults.Failure;
Dts.TaskResult = (int)ScriptResults.Success;
catch (Exception ex)
Dts.Log("Error Message: " + ex.Message, 0, dataByte);
Dts.TaskResult = (int)ScriptResults.Failure;
public String ReadFile(String FilePath, String ErrInfo)
String strContents;
StreamReader sReader;
try
sReader = File.OpenText(FilePath);
strContents = sReader.ReadToEnd();
sReader.Close();
return strContents;
catch (Exception e)
MessageBox.Show(ErrInfo);
ErrInfo = e.Message;
return "";
how to solve this issue
pleasse help me..

Hi sheshu0022,
Based on my research, the issue can be occurred due to something get corrupted in the script task. To fix this issue, please copy the code in the task, then rebuild the script task with the same code to test again.
The following similar thread is for your reference:
http://stackoverflow.com/questions/15165760/ssis-script-task-fails-on-server-with-error-cannot-load-script-for-execution
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Need help in Load script

Hi All,
I have recorded a Load script with 5 classes(5 check boxes) and i press select all button,so if script is having 5 classes it will pass and if it is having less than 5 classes it is failing.
http.solveXPath("web.input.selected",".//INPUT[@name='selected[]']/@value", "3523", 0,EncodeOptions.None);-one checkbox
Need suggestions what should be done.
Thanks
Mahesh

hi, use this one, it's working, if any thing u want mail to this id [email protected] .
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML>
<HEAD>
<script type="text/javascript">
var newwindow;
function poptastic(url) {
newwindow=window.open(url,'name','height=300,width=400,left=100, top=100,resizable=yes,scrollbars=yes,toolbar=yes,status=yes');
if (window.focus) {
newwindow.focus()
} else {
newwindow.close()
} // if (window.focus) {newwindow.focus()} }
</script>
<TITLE> New Document </TITLE>
<META NAME="Generator" CONTENT="EditPlus">
<META NAME="Author" CONTENT="">
<META NAME="Keywords" CONTENT="">
<META NAME="Description" CONTENT="">
</HEAD>
<BODY>
World Environment
</BODY>
</HTML>

JavaScript blocked or failed to load

Hello,
Sometime ago I suddenly realized that JavaScript was not working in my Firefox. I get a very explicit error message from Stack Overflow:
"Stack Overflow requires external JavaScript from another domain, which is blocked or failed to load."
Many other websites also do not work.
I currently am running Windows 7 and on typing "java -version", I get the following output:
java version "1.7.0_40"
Java(TM) SE Runtime Environment (build 1.7.0_40-b43)
Java HotSpot(TM) 64-Bit Server VM (build 24.0-b56, mixed mode)
I know Java is installed and working because I can compile and run .java files from NetBeans.
I am in a fix as I have spent many hours troubleshooting this problem but could not solve it. I am very hopeful for a solution here.
Thanks

Firefox has a single global setting for JavaScript: either it's enabled or it isn't. If JavaScript works on any site, then that setting should be fine. If you're not sure, you can check here:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the search box above the list, type or paste '''java''' and pause while the list is filtered
(3) If '''javascript.enabled''' is not set to its default value of true, double-click it to switch it back to true.
Firefox does not have a user interface for applying site-specific scripting restrictions, but this can be done using extensions or using "capability" preferences. I don't see the best known script blockers on your extension list (NoScript, YesScript, Controle De Scripts) so I suggest checking for the hidden preferences first.
Open your current Firefox settings (AKA Firefox profile) folder using
Help > Troubleshooting Information > "Show Folder" button
Scroll down to prefs.js and open it in a text editor (note: you can't save changes while Firefox is running, but you can exit Firefox if you find something you need to edit out)
Search for '''capab''' (the beginning of the word capability). Do you find any preferences that contain capability and javascript and noAccess? If so, that may explain why scripts cannot run on some sites. Feel free to post those lines here for analysis.
To test the extension possibility, could you try some of the problem sites in Firefox's Safe Mode? That's a standard diagnostic tool to bypass interference by extensions (and some custom settings). More info: [[Troubleshoot Firefox issues using Safe Mode]].
You can restart Firefox in Safe Mode using
Help > Restart with Add-ons Disabled
In the dialog, click "Start in Safe Mode" (''not'' Reset)
Any change?

Random Bingads WSDL errors: Parsing WSDL: Couldn't load from...failed to load external entity, Could not connect to host, Parsing Schema: can't import schema from

Hi,
I am developing a web tool that accesses client's Bingads accounts via OAUTH2 granting. I am downloading data from clients daily.
Generally it worked, but for 2 days I am experiencing a weird issue, that in random times (but more and more often though) I receive random error messages from Bing server. I am pasting below a few example from my logs (with timestamp and request/response).
Must note that I launch these requests from the server where we have the webapp but also I launch it locally. The same is the result.
The timestamp is in France time (GMT+1).
Thanks ahead!
Best regards,
Steve
2015-01-14 15:08:05: Service\BingAds::initService => SOAP-ERROR: Parsing Schema: can't import schema from 'https://reporting.api.bingads.microsoft.com/Api/Advertiser/Reporting/V9/ReportingService.svc?xsd=xsd0'
---------Soap Request:--------------------------------------------
<?xml version="1.0" encoding="UTF-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="https://bingads.microsoft.com/CampaignManagement/v9"><SOAP-ENV:Header><ns1:CustomerAccountId>XXX</ns1:CustomerAccountId><ns1:CustomerId/><ns1:DeveloperToken>XXX</ns1:DeveloperToken><ns1:UserName/><ns1:Password/><ns1:AuthenticationToken>XXX</ns1:AuthenticationToken></SOAP-ENV:Header><SOAP-ENV:Body><ns1:GetDetailedBulkDownloadStatusRequest><ns1:RequestId>108277125</ns1:RequestId></ns1:GetDetailedBulkDownloadStatusRequest></SOAP-ENV:Body></SOAP-ENV:Envelope>
---------Response:------------------------------------------------
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/"><s:Header><h:TrackingId xmlns:h="https://bingads.microsoft.com/CampaignManagement/v9">XXXXX</h:TrackingId></s:Header><s:Body><GetDetailedBulkDownloadStatusResponse
xmlns="https://bingads.microsoft.com/CampaignManagement/v9"><Errors i:nil="true" xmlns:i="http://www.w3.org/2001/XMLSchema-instance"/><ForwardCompatibilityMap xmlns:a="http://schemas.datacontract.org/2004/07/System.Collections.Generic"
xmlns:i="http://www.w3.org/2001/XMLSchema-instance"/><PercentComplete>100</PercentComplete><RequestStatus>Completed</RequestStatus><ResultFileUrl>https://download.api.bingads.microsoft.com/ReportDownload/Download.aspx?q=XXX</ResultFileUrl></GetDetailedBulkDownloadStatusResponse></s:Body></s:Envelope>
2015-01-15 05:41:39: Service\BingAds::getCampaigns => SoapFault: Could not connect to host
---------Soap Request:--------------------------------------------
<?xml version="1.0" encoding="UTF-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="https://bingads.microsoft.com/CampaignManagement/v9"><SOAP-ENV:Header><ns1:CustomerAccountId>XXX</ns1:CustomerAccountId><ns1:CustomerId/><ns1:DeveloperToken>XXX</ns1:DeveloperToken><ns1:UserName/><ns1:Password/><ns1:AuthenticationToken>XXX</ns1:AuthenticationToken></SOAP-ENV:Header><SOAP-ENV:Body><ns1:GetCampaignsByAccountIdRequest><ns1:AccountId>XXX</ns1:AccountId></ns1:GetCampaignsByAccountIdRequest></SOAP-ENV:Body></SOAP-ENV:Envelope>
---------Response:------------------------------------------------
(empty response logged)
2015-01-15 05:45:00: Service\BingAds::initService => SOAP-ERROR: Parsing WSDL: Couldn't load from 'https://api.bingads.microsoft.com/Api/Advertiser/CampaignManagement/v9/CampaignManagementService.svc?singleWsdl' : failed to load external entity "https://api.bingads.microsoft.com/Api/Advertiser/CampaignManagement/v9/CampaignManagementService.svc?singleWsdl"
2015-01-15 11:58:46: Service\BingAds::getCampaigns =>
---------Soap Fault:--------------------------------------------
SoapFault catched:
Could not connect to host
---------Soap Request:--------------------------------------------
<?xml version="1.0" encoding="UTF-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="https://bingads.microsoft.com/CampaignManagement/v9"><SOAP-ENV:Header><ns1:CustomerAccountId>XXXX</ns1:CustomerAccountId><ns1:CustomerId/><ns1:DeveloperToken>XXXX</ns1:DeveloperToken><ns1:UserName/><ns1:Password/><ns1:AuthenticationToken>XXX</ns1:AuthenticationToken></SOAP-ENV:Header><SOAP-ENV:Body><ns1:GetCampaignsByAccountIdRequest><ns1:AccountId>XXXX</ns1:AccountId></ns1:GetCampaignsByAccountIdRequest></SOAP-ENV:Body></SOAP-ENV:Envelope>
---------Response:------------------------------------------------
(empty response logged)
2015-01-15 11:59:50: Service\BingAds::initService =>
---------Soap Fault:--------------------------------------------
SoapFault catched:
SOAP-ERROR: Parsing WSDL: Couldn't load from 'https://api.bingads.microsoft.com/Api/Advertiser/CampaignManagement/v9/CampaignManagementService.svc?singleWsdl' : failed to load external entity "https://api.bingads.microsoft.com/Api/Advertiser/CampaignManagement/v9/CampaignManagementService.svc?singleWsdl"
---------Soap Request:--------------------------------------------
<?xml version="1.0" encoding="UTF-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="https://bingads.microsoft.com/CampaignManagement/v9"><SOAP-ENV:Header><ns1:CustomerAccountId>XXX</ns1:CustomerAccountId><ns1:CustomerId/><ns1:DeveloperToken>XXXXX</ns1:DeveloperToken><ns1:UserName/><ns1:Password/><ns1:AuthenticationToken>XXXX</ns1:AuthenticationToken></SOAP-ENV:Header><SOAP-ENV:Body><ns1:GetCampaignsByAccountIdRequest><ns1:AccountId>XXX</ns1:AccountId></ns1:GetCampaignsByAccountIdRequest></SOAP-ENV:Body></SOAP-ENV:Envelope>
---------Response:------------------------------------------------
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/"><s:Header><h:TrackingId xmlns:h="https://bingads.microsoft.com/CampaignManagement/v9">XXXXX</h:TrackingId></s:Header><s:Body><GetCampaignsByAccountIdResponse
xmlns="https://bingads.microsoft.com/CampaignManagement/v9"><Campaigns xmlns:i="http://www.w3.org/2001/XMLSchema-instance"></Campaign>........</Campaigns></GetCampaignsByAccountIdResponse></s:Body></s:Envelope>
2015-01-15 12:05:55: Service\BingAds::getCampaigns =>
---------Soap Fault:--------------------------------------------
SoapFault catched:
Could not connect to host
---------Soap Request:--------------------------------------------
<?xml version="1.0" encoding="UTF-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="https://bingads.microsoft.com/CampaignManagement/v9"><SOAP-ENV:Header><ns1:CustomerAccountId>XXXXX</ns1:CustomerAccountId><ns1:CustomerId/><ns1:DeveloperToken>XXXXX</ns1:DeveloperToken><ns1:UserName/><ns1:Password/><ns1:AuthenticationToken>XXXXXX</ns1:AuthenticationToken></SOAP-ENV:Header><SOAP-ENV:Body><ns1:GetCampaignsByAccountIdRequest><ns1:AccountId>XXXXX</ns1:AccountId></ns1:GetCampaignsByAccountIdRequest></SOAP-ENV:Body></SOAP-ENV:Envelope>
---------Response:------------------------------------------------
(empty response logged)

Hi,
1. I am using the older version of the PHP library provided by Bing (updated on 1/20/2014), so that is doing the WSDL loadings. I initialize the proxy calling OpticoBingAdsClientProxy providing what it needs, and then do the requests.
2. I have a cron that reads data from client's accounts. I make several calls, like get search query report, get keyword performance report, get keyword bulk data. As the script progressed the first 2 worked and the third gave error. Or in other cases the
first request failed. The calls have quite some time in between them since I process data (sometimes even 160 seconds)
3. I did not change the code ion terms of requests, since as I said I use the PHP library (same credentials, ...).
As of today (2015-01-16 10:30 GMT + 2) running my script, still have the same issues.
Thank you!
Steve

Cannot load script for the required change in butt...

I got the email saying Skype will be changed after 15 March. It says we need the new buttons. So I go the site, and then there is a big box which says: "cut and paste this" which is:
<script type="text/javascript" src="http://www.skypeassets.com/i/scom/js/skype-uri.js"></script>
<div id="SkypeButton_Call_[Removed for privacy]_1">
<script type="text/javascript">
Skype.ui({
"name": "call",
"element": "SkypeButton_Call_[Removed for privacy]_1",
"participants": ["[Removed for privacy]"],
"imageSize": 32
</script>
</div>
So where do I paste this script. Plus I get we need to do on our Ipads as well.

Hi sheshu0022,
Based on my research, the issue can be occurred due to something get corrupted in the script task. To fix this issue, please copy the code in the task, then rebuild the script task with the same code to test again.
The following similar thread is for your reference:
http://stackoverflow.com/questions/15165760/ssis-script-task-fails-on-server-with-error-cannot-load-script-for-execution
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Failed to load META-INF/application.xml when upgrading to wls9.2

We are migrating our weblogic server from 8.1 to 9.2. Tried to use DDConverter to convert the EJB deployment descriptor, but when I ran weblogic.appc, I got the following error :
<i><Error> <J2EE> <BEA-160197> <Unable to load descriptor D:\workspace\webshopEJB\wl9.2/META-INF/application.xml of module webshopLogic. The error is weblogic.descriptor.DescriptorException: Unmarshaller failed</i>
and
<i>Caused by: com.bea.xml.XmlException: failed to load java type corresponding to e=application@http://java.sun.com/xml/ns/j2ee</i>
Here is my application.xml
<b><?xml version="1.0" encoding="UTF-8"?>
<application xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" version="1.4">
<description>webshop EJB module</description>
<display-name>webshop Logic EJB</display-name>
<module>
<ejb>webshopLogic</ejb>
</module>
</application></b>
I checked for classpath, and still no clue about what's going wrong. Thanks in advance for any help.

I believe this likely is a classpath problem. I'd start by using the setWLSEnv.cmd or .sh script in the kit. That should set the classpath correctly.
Also, FWIW it wasn't required to run DDConverter. You could have used your 8.1 descriptors unchanged in 9.x as well.
-- Rob
WLS Blog http://dev2dev.bea.com/blog/rwoollen/

Java.rmi.UnmarshalException: Failed to load class com.msl.security.provider

Hi ,
I have the following error while i am stopping a Weblogic instance. Did anyone face a similar issue, please let me know. I see a classnotfound error , but not sure what is that jar file. Is it a application jar or a weblogic one?
Stopping Weblogic Server...
Initializing WebLogic Scripting Tool (WLST) ...
log4j: Trying to find [resources/comdev/default-log4j.properties] using context classloader java.net.URLClassLoader@183f74d.
log4j: Using URL [jar:file:/teamrule/10.2/modules/com.bea.cie.comdev_5.3.0.0.jar!/resources/comdev/default-log4j.properties] for automatic log4j configuration.
log4j: Reading configuration from URL jar:file:/teamrule/10.2/modules/com.bea.cie.comdev_5.3.0.0.jar!/resources/comdev/default-log4j.properties
log4j: Hierarchy threshold set to [ALL].
log4j: Parsing for [root] with value=[INFO, NA].
log4j: Level token is [INFO].
log4j: Category root set to INFO
log4j: Parsing appender named "NA".
log4j: Parsed "NA" options.
log4j: Finished configuring.
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
Connecting to t3://localhost:7009 with userid weblogic ...
This Exception occurred at Sun Apr 10 14:17:03 UTC 2011.
javax.naming.CommunicationException [Root exception is java.rmi.UnmarshalException: failed to unmarshal class weblogic.security.acl.internal.AuthenticatedUser; nested excep
tion is:
java.lang.ClassNotFoundException: Failed to load class com.msl.security.providers.SessionPrincipal]
at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:74)
at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:32)
at weblogic.jndi.WLInitialContextFactoryDelegate.toNamingException(WLInitialContextFactoryDelegate.java:773)
at weblogic.jndi.WLInitialContextFactoryDelegate.pushSubject(WLInitialContextFactoryDelegate.java:673)
at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLInitialContextFactoryDelegate.java:466)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:373)
... 48 more
Problem invoking WLST - Traceback (innermost last):
File "/web/10.2/user_projects/domains/dom/shutdown.py", line 1, in ?
File "<iostream>", line 22, in connect
WLSTException: 'Error occured while performing connect : Error getting the initial context. There is no server running at t3://localhost:7009 Use dumpStac
k() to view the full stacktrace'
Thanks a lot for your time.
Manish

Hi Manish,
It seems that you are using a custom security provider and the weblogic server is not able to find the class / jar file that contains the class.
java.lang.ClassNotFoundException: Failed to load class com.msl.security.providers.SessionPrincipal]
Make sure you have all the required jar files in the server classpath.
You can use the JarScan utility to find the jar that contains the class.
Refer the below link regarding the jarScan.
http://weblogic-wonders.com/weblogic/2011/01/26/finding-jar-files-using-jarscan/
Regards,
Anandraj
http://weblogic-wonders.com

SCRIPT_LOAD_ERROR:Failed to load script

Similar Messages

Maybe you are looking for