Scroll all the rows in a table except the first row

I have an HTML table
for eg...
<html>
<div style="height:100px;overflow:auto">
<table>
<tr><td>xyz</td></tr> ///this row should not scroll
<tr><td>123</td></tr> ///the rows repeated 100 times to allow scrolling
</table>
</div>
</html>
it gives me a nice table with a vertical scroll bar. What I want is my first row should not scroll. The scroll bar should be applicable from rows 2-100. I am not able to use this <div> tag exclusively to <tr>. Any inputs as to how this can be achieved.
Raghav

The whole problem is I lose the table alignment. if I have a table like
<table>
<tr><td>heading1</td><td>heading2</td><td>heading3</td></tr>
<tr><td>value1</td><td>value2</td><td>value3</td></tr>
<tr><td>value1</td><td>value2</td><td>value3</td></tr>
<tr><td>value1</td><td>value2</td><td>value3</td></tr>
<tr><td>value1</td><td>value2</td><td>value3</td></tr>
<tr><td>value1</td><td>value2</td><td>value3</td></tr>
//so on
</table>
all my rows from 2-99 are aligned properly under the first row.
If I have a <div > tag or a new table for row "2-99"..the alignment is gone. "value1", value2 and value3 dont fall exactly under "heading1" "heading2" and heading3 respectively. I hope I made my point.
<table>
<tr><td>heading1</td><td>heading2</td><td>heading3</td></tr>
<tr><td>
<div style="height:100px; overflow:auto">
<table>
<tr><td>value1</td><td>value2</td><td>value3</td></tr>
<tr><td>value1</td><td>value2</td><td>value3</td></tr>
<tr><td>value1</td><td>value2</td><td>value3</td></tr>
<tr><td>value1</td><td>value2</td><td>value3</td></tr>
<tr><td>value1</td><td>value2</td><td>value3</td></tr>
//so on
</table>
</div>
</td></tr>
</table>
Raghav

Similar Messages

  • Can't get the pages sidebar to scroll all the way down

    If I'm using Acrobat 9, and I have the pages sidebar open, I am unable to scroll all the way down to the very last pages. For example, if I have the sidebar set so that each row has thumbnails for two pages, and the document has 51 pages, I can only drag the scrollbar down far enough to show page 50. I can access the last page, but I can't select the icon to, say, move it to another place in the document. Same thing if it is four pages wide and the document's lenght isn't a multiple of four: the sidebar doesn't want to show the last half-full row of pages. Any ideas what might be causing this?

    Useful article here on the causes of the Spinning Beach Ball and how to troubleshoot it:
    http://www.computerworld.com/s/article/9177479/Troubleshoot_the_spinning_beach_b all?taxonomyId=89&pageNumber=1
    and also this:
    http://www.thexlab.com/faqs/sbbod.html

  • When using safari, my screen will suddenly scroll all the way to the bottom and will not resound to any commands.  This affects all running programs.  How do I stop this?

    When I am on the internet, my screen will suddenly scroll all the way to the bottom and will not respond to any commands.  All of the other programs are then affected the same way and you cannot even use the commands at the top of the screen becayse they all scroll to the bottom.  After a while, the screen resets by itself.  Help.

    It sounds like a problem wih the backlight inverter. Usually they just go, instead of on and off.
    In a dark room hold a flashlight on the display when it blacks out. If you can see the items on the desktop, it's probably the backlight.

  • My iTunes won't scroll all the way to the bottom. How can I fix this?

    I have a large library, and I can't scroll all the way to the bottom. This is the same for the iTunes homepage, and any other pages, so that I cannot get to the bottom of the page. How can I fix this?

    ''downloads won't open from the Download List:''
    The Downloads Manager ("Ctrl+J") is more like a log of downloads, it does not verify that the download still exits. Make sure you are setup to download to a permanent location, not into temporary files that get cleaned by the browser or by CCCleaner or something designed to clear out temporary files.
    Tools > Options > General > Downloads: ...
    Tools > Options > Privacy > [x] Remember download history
    Don't clear your download history automatically, but having a lot there whether they exist or not, can slow down Firefox at least it was an issue:
    :http://img232.imageshack.us/img232/4928/clearcachew.png
    The may be additional about:config settings in addition to the above.

  • Strange...safari scrolls all the way down on random pages...

    It seems that with one page or two, Safari loads them just fine, but upon completion of loading, it instantly moves to the bottom of the page...
    this is VERY frustrating. Everytime I load the page I have to manually scroll back up. The page that this always happens with is torrentspy.com (no, not used for the torrents, but for their news).
    Could someone check to see if it's just me, or does safari just have a problem with torrentspy? Thanks.

    Hi Andy, Flipperbw
    Checked on the Pb 2.0.4. scrolled all the way ☟.
    On the fp 1.3.2 all the way down & the text is off. These errors generated
    in the console:
    [351] http://www.spikedhumor.com/feed/SpikedFeed.aspx?totalitems=3&title_length=30&desc_length=45&date_range=1&headfont_size=12px&bodyfont_ size=10px&font_face=Arial&title_color=1C5C9A&desc_color=548BC2&rating_color=F385 00&commentcolor=F38500:SyntaxError - Parse error
    [351] http://www.torrentspy.com/staticFrame.asp?z=Footer&c=US&a=0&r=7.35132694244385E- 02:TypeError - Undefined value
    [351] http://www.torrentspy.com/staticFrame.asp?z=Footer&c=US&a=0&r=7.35132694244385E- 02:TypeError - Undefined value
    Intel iMac 2.0.4 it will not load beyond 26 items to the 27 for at least 8 min. no logging created in console.
    http://validator.w3.org/check?uri=http%3A%2F%2Fwww.torrentspy.com%2F
    Eme♪;~[)

  • The sheet I am working on has lost the ability for me to scroll to the first few columns. I can't see the columns but I can cut and paste them so I know they are still there. Has this happened to others

    The sheet I am working on has lost the ability for me to scroll to the first few columns. I can't see the columns A & B but if I cut and paste the table to a new sheet, the columns I am missing will travel to the new sheet.  I have charts and other stuff related the the original table so I need to figure out why I can only see from column C  forward.  I tried to "UNHIDE" the columns but the function doesn't seem to recognise that there are columns missing. Has this happened to others and how did you fix it?

    I've seen it happen before, or at least it sounds something like what I've seen before. The table somehow gets into the margins of the page and the app doesn't know how to deal with it. Go into Print View and try moving the table away from the left side ofthe page. You might have to change content size or resize the table to get it to correct (then put you can put them back the way you like).

  • When editing a PDF document with fillable forms, I get an unhandled exception error when scrolling past the first page

    The first error is "An unhandled Win32 exception occurred in Acrobat.exe [4644]"
    A debug window comes up after this and I open Visual Studio (not my area of expertise), and a couple more messages come up that may be helpful.
    Unhandled exception at 0x625628db in Acrobat.exe: 0xC0000005: Access violation reading location 0x00000044.
    Then
    [Frames below may be incorrect and/or missing, no symbols loaded for AcroForm.api]
    This is on Windows 7, running Acrobat Pro version 9.5.5
    No new updates are available either.
    Any ideas where to start? This happens with a couple of documents, but not all that are being edited.

    I am also getting the same error for fill-able PDFs. Were you able to find an answer/solution for this problem?
    I am using Acrobat X Pro on Windows 7
    Any help would be appreciated..

  • In safari a lot web pages will not scroll all the way down

    a lot of web pages in safari will not scoll all the way to the bottom what do I do

    You can try to resetting Safari. Tap Settings, then tap Safari on the left side. Then on the right side - tap clear history, clear cookies, clear cache. Clear all three. Reboot your iPad. Hold down on the sleep button at the top until the red slider appears and slide to power off. Then hold down on the sleep button until the Apple logo appears and the iPad will restart. Launch Safari and see if helped.
    If you are trying to scroll through an area of text and can't scroll to the bottom try a two finger scroll.

  • How do i get to the top of an iTunes playlist without having to scroll all the way

    when i am down at the bottom of one of my playlists and i want to get to the top i have to scroll through thousands of songs and it takes forever i was just wondering if there is an easier way to get to the top of a playlist?

    Hi Dlink123,
    To move to the top of the list, you would use the Home button as with most places on the Mac, fn-Left Arrow on a MacBook Pro.
    OS X: Keyboard shortcuts - Apple Support
    fn-Left Arrow
    Scroll to the beginning of a document (same as Home key)
    fn-Right Arrow
    Scroll to the end of a document (same as End key)
    Note you need to be in the song list so it knows what your are moving to the top of, so click on a song first if none is currently selected.
    Thank you for visiting Apple Support Communities.
    Nubz

  • HT201269 Following these steps, has anyone run into the problem of losing the 4s data ability?  My phone no longer acknowledges my data plan.  I have to reset to factory settings to get it back, but then I also lose all the first gen backup transfer info.

    Long story short, I'm trying to progress from my first gen iPhone to my iPhone 4s.  I sync my first gen as directed to create a backup, and then restore my 4s to the first gen backup.  However, once this is done (and it does successfully transfer my first gen phone apps, photos, texts, calendar, etc-etc to my 4s), my 4s phone no longer has 4g data like it did prior to syncing - it doesn't recognize my data plan at all.  The only way I can access the internet is through my wi-fi.  So then I have to reset to factory settings and re-plus my personal settings into the 4s but then I lose everything from the first gen transfer.  Any thoughts and/or recommendations/suggestions?  Many thanks.

    Long story short, I'm trying to progress from my first gen iPhone to my iPhone 4s.  I sync my first gen as directed to create a backup, and then restore my 4s to the first gen backup.  However, once this is done (and it does successfully transfer my first gen phone apps, photos, texts, calendar, etc-etc to my 4s), my 4s phone no longer has 4g data like it did prior to syncing - it doesn't recognize my data plan at all.  The only way I can access the internet is through my wi-fi.  So then I have to reset to factory settings and re-plus my personal settings into the 4s but then I lose everything from the first gen transfer.  Any thoughts and/or recommendations/suggestions?  Many thanks.

  • Using Lion.  Stamped a project with metadata and all the first pictures in a stack are now square when they were not before.  Any ideas how to get them back to their original shape?

    I created the metadata for a project and lifted the metadata, hit Command A to select over 1000 photos and stamed the entire project.  It rated all the pics with 3 stars and made them all square.  Clearly not my intent.  Can't seem to undo.  Any ideas?

    Let's start with this: do they all show that they have a Crop adjustment applied?
    Are they square in both the Browser and the Viewer?

  • My zoom won't zoom out even with tapping 3 fingers. It also won't let me scroll all the way up to select reset. How do I fix it?!

    I hit zoom "on" in accessability and now my phone is stuck. I have tried the double tap with three fingers, but that's not working. It also isn't letting me select any options. I can't even turn it off because it won't allow me to scroll up to get to it. This is so frustrating!!!

    Double tap with three fingers and slide the 3 fingure gesture downward on the second tap to zoom back out.

  • Iphone 3G does not scroll all the e mails is it the phone or the soft ware  software

    having trouble scrolling a full page of e-mails, there isa blank spac at the bottom of the bottom any ideas 

    Hello jdtracy1,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    Best of luck,
    Mario

  • How can I scroll all the way down in my inbox? There is no down arrow on the right side after severl e-mails are read.

    When reading my e-mail after about 20 or so I can't go down any farther. There is no arrow to scroll down on the right side of the screen. I have to delete some messages in order to go on down the mail list.

    And attached is a screen grab showing selected e-mails in the Inbox...the white space below are e-mails too!

  • How to adjust Numbers so I can scroll all the way to EE or FG etc without having to press that button for every column

    I need to make a sheet with about 150 columns, which is about up to ET but the only way i see to get there is by continually pressing the top right button to add one column at a time. This is very time consuming, how do I set up Numbers to show me 150 column, i.e. up to ET??
    thanks in advance

    This NI-DAQ function call directly accesses the nidaq32.dll. While the nidaq32.dll is multithread safe, it is not a multithreaded DLL. This is also described in the KnowledgeBase entry 1V9DSHDM: "Can NI-DAQ Handle Different Operations at the Same Time? Is It a Multi-threaded DLL?"
    You are correct that the SCXI_Set_Gain function is not asynchronous. Thus, you do have to wait till that function returns before calling the next one. LabVIEW has found a way around this. So, you can actually use the LabVIEW functions to set the gain on these modules without having to wait as you do with SCXI_Set_Gain.
    Regards,
    Geneva L.
    Applications Engineer
    National Instruments
    http://www.ni.com/ask

Maybe you are looking for