SCVMM Logical switch setup from not using SCVMM

I'm playing around with SCVMM 2012 SP1 with my Hyper-V 2012 setup. I have a test server but I'm looking at migrating from the way I was doing thing to the way SCVMM does things (with logical switch and multiple virtual network adapters per VLAN)
This is how I currently have my production setup:
Each Hyper-V host has two nics
Those two nics are teamed together using Windows 2012 Teaming (Hyper-V port, switch independent)
They were not configured with SCVMM
The Hyper-V virtual switch is named "Trunk"
All VM's are part of the Trunk virtual switch and tagged on the guest level
What I'm trying to do after watching this video: http://technet.microsoft.com/en-us/video/tdbe13-network-management-in-system-center-2012-sp1-vmm.aspx
Created my logical network "Datacenter"
Added my three VLANs to the Network site: (VLAN 1 is management, VLAN 10 is client, VLAN 505 is DMZ)
Created my Native Port Profile with HyperVPort and Switch Independent and mapped it to my network site and used the Datacenter logical network (DID NOT check network virtualization.. don't want to use that)
Created my logical switch with uplink mode TEAM and bound to my uplink port profile
Now on my test host:
I broke the existing TEAM I had. So now it is a server with two nics and the IP it had on one nic (10.10.0.207)
Went to properties of VM
Virtual Switches -> New Logical Switch -> Mapped to my "datacenter" logical switch, picked both physical adapters and mapped to my only uplink port profile I have
New Virtual Network Adapter
Name: Management, Checked this adapter inherits settings from physical, mapped to my Management Network, set to "Host Management" port profile"
New Virtual Network Adapter
Name: Client, adapter inherits is not checked, mapped to my Client Network, set to medium bandwidth port profile
However when I do this:
Error (2940)
VMM is unable to complete the requested file transfer. The connection to the HTTP server HYPERV07.mgmt.local could not be established.
Unknown error (0x80072ee2)
Recommended Action
Ensure that the HTTP service and/or the agent on the machine HYPERV07.mgmt.local are installed and running and that a firewall is not blocking HTTP/HTTPS traffic on the configured port.
What I noticed:
I never lose connectivity to the host during this process
Always failes at 65%
Is this because I don't have a dedicate NIC for management? Also would there be an easy way to migrate from how my production is setup to what I'm trying to do?

I am actually just finishing up but I redeployed and went to 2012 R2. It seemed to be able to do it.
What I did was created one logical switch with one vSwitch (which is a trunk). Then multiple VM Networks that have the different VLAN ID's.
It seemed to work OK except during the creating it wouldnt TAG VLAN 1 on the vSwitch when it created which was needed for it to communicate on my network. Once I saw it creatd it and lost connectivity I manually put the VLAN 1 on the vSwitch and set the
IP address for the host.
So far seems ok but I'm still associating VM's with the Logical Switch I setup and bringing everything back up... 

Similar Messages

  • How to know active user in Ad ? & how many days from not use user id ?

    How to know active user in Ad ? & how many days from not use user id ?
    Thanks & Regards, Amol . Amol Dhaygude

    Hi Amol,
    You can use the below command from the command prompt of DC to get all the AD users who are inactive for last
    X weeks,
                                    dsquery
    user -inactive X 
    To extract the inactive user information to a CSV file use the below command,
                   dsquery user -inactive X > c:\TestFolder\InactiveUsers.csv
    NOTE: The value
    X represents number of weeks, for example if your requirement is to find the inactive users for last 90 days then the
    X value should be 13.
    Regards,
    Gopi
    JiJi Technologies

  • My iphone 4 keeps switching off if not used for an hour or so and needs the reboot to turn it on

    My IPhone 4 keeps switching off if not used for an hour or so and needs the reboot to turn it back on again?

    Hi, DREWidz.  
    Thank you for visiting Apple Support Communities.  
    It sounds like you are experiencing an issue with your device unexpectedly restarts.  Here are some troubleshooting steps that may help.  
    iOS: Device unexpectedly restarts, displays Apple logo, or powers off
    http://support.apple.com/en-us/TS5356
    Cheers, 
    Jason H.  

  • I need to find a hard drive to stream films from not using the internet.

    I am looking to purchase a hard drive that my partner can watch movies from on his iPad, he is in the Navy so won't have internet or a router to go through, I did find one on PC world but wasn't sure if it would actually work or not. has anyone got a hard drive that the iPad can connect to?

    I agree. I've been researching these for a while and Seagate sounds pretty good.
    However, before you buy it, please know that it is not simply plug and play. I read many reviews on Amazon and learned a lot about how it will work if we get one. And while you usually have to click on comments to see if there's more info that will also help, Seagate responds with boxed answers right under people's complaints/ concerns that can make the hard drive work properly. (I tend to over research most things like this before I buy them, but then I'm always happy with what I buy.) You might also want to google your question for reviews of the Seagate wireless mobile external and get professional tech reviews.
    Making your decision and setting everything up will take time, but your partner will be able to enjoy movies, music, and books.
    Hope this helps.

  • How to restrict end-user from not using certain movement-types in MB1B

    Dear Gurus,
    My client wants that end user has access to only particular movement types in MB1B.i.e only to 311 and 412,421E.
    They do not want any other movement types to be access by end-users in MB1B
    How to go about this requirement?
    Thanks in advance
    Regards
    Ram
    Edited by: RAMKUMAR WARIYAR on Jun 27, 2009 2:14 PM

    hi,
    This is possible you can restrict and allow user for movement type which they can do through any t code.
    Contact yours BASIS consultant for that
    Regards,
    Vishal
    Edited by: VS on Jun 27, 2009 5:46 PM

  • Cannot Add Logic Switch To host When Teaming two 10Gbe ports on the same CNA or on different CNAs

    We are trying to set up a new Hyper-V environment for a customer with VMM2012 SP1.  We have the hosts configured, imported, and clustered.  The Uplink Port-Profile is set to the proper LACP teaming method for our switching.  The Logical switch
    is created in uplink mode Team and includes the proper Uplink Port Profile.
    When we go to create a logical switch on the Hosts using the two interfaces to be teamed, we get Warning (25259), Error while applying physical adapter network settings to the teamed adapter.  Error code details 2147942484.
    I reasearched and found articles about setting up NICs in a correct order in the team from least capable to most capable, but in this case we are trying to team two ports on the same adapter... We have tried with Intel X520-2's and Brocade CNA1020's.  The
    odd thing is, if we try to do it on the onboard 1Gbe Broadcom cards, it works fine.
    This happens on both clustered and non-clustered hosts as well.  All VMM components are the latest versions with the latest updates.
    Thanks!

    We are trying to set up a new Hyper-V environment for a customer with VMM2012 SP1.  We have the hosts configured, imported, and clustered.  The Uplink Port-Profile is set to the proper LACP teaming method for our switching.  The Logical switch
    is created in uplink mode Team and includes the proper Uplink Port Profile.
    When we go to create a logical switch on the Hosts using the two interfaces to be teamed, we get Warning (25259), Error while applying physical adapter network settings to the teamed adapter.  Error code details 2147942484.
    I reasearched and found articles about setting up NICs in a correct order in the team from least capable to most capable, but in this case we are trying to team two ports on the same adapter... We have tried with Intel X520-2's and Brocade CNA1020's.  The
    odd thing is, if we try to do it on the onboard 1Gbe Broadcom cards, it works fine.
    This happens on both clustered and non-clustered hosts as well.  All VMM components are the latest versions with the latest updates.
    Thanks!

  • Recovering deleted notes using Time Capsule

    How do I find a deleted note from "Notes" using Time Machine back up?

    See this thread:  https://discussions.apple.com/thread/4179465
    Looks like it's this folder:
    ~/Library/Containers/com.apple.Notes/Data/Library/CoreData/ExternalRecords

  • VMware ESX Cluster Port Groups not Replicated as Network Sites in SCVMM 2012 Logical Switch

    To whom it may concern,
    We have added our ESX 4.1 Update 2 Cluster that's being managed by VMware vCenter to SCVMM 2012 because we want to create a private cloud and use the resources of the ESX cluster. SCVMM is replicating all the vSwitch from the ESX cluster as a logical network
    but it's not replicating the port groups on the vSwitch as Network Sites associated to the Logical Network.
    May you please advise or confirm that this is the normal behaviour of SCVMM? Or is there any way that SCVMM would be able to recognize the port groups associated to the ESX vSwitch and replicate it a a Networks Sites associated to Logical Switches?
    Your prompt response will be greatly appreciated.
    Thanks in advance!

    Hi Graham,
    Thanks for your reply. 
    I understand that we need to configure the port groups in the vCenter server but SCVMM is only replicating the vSwitch as a Logical Network but not the port groups. It should also replicate the port group as a network site associated to the logical network.
    On our VMware environment, we have port groups on different VLANs and being mapped to one physical NIC. When creating a VMware VM in a private cloud with a self-service user role we can't select the option to connect the port group that we've created from
    the vCenter server. The only option it gives is the logical network (vSwitch) not the port groups within that logical network (vSwitch). Even if we create network site within the logical network (with assigned VLAN) in SCVMM, it randomly selects the port group
    within the VMware vSwitch when we create a VM. We need the users with a self-service role to be able to select the port group from our vSwitch to assign the virtual NIC of the VM to a specific port group. In this way, they don't have to call or email us to
    assign the VM to a port group.
    I still don't understand why SCVMM does not map the port groups we've created from VMware vCenter server with user that has a self-service role. Is there any other way so that we can map the port group automatically to SCVMM? 
    Please advise. Thanks!

  • SCVMM 2012R2 - change port profiles and logical Switches

    Dear all,
    we are runnings a few clusters with Hyper-V 2012R2, managed by SCVMM 2012R2.
    I have configurad a Logical switch "Cluster-Default" with the necessary Logical networks, Port Pofiles etc., everything works fine.
    Now I have to make an additional network available to some of our VMs that is currently not configured in the Switch and the Uplink Port profile.
    Can I add Logical and VM Networks to a port profile that is "in use"?
    If Yes, how will these changes be applied to the hosts that are using the switches?
    (I have searched through technet and have found a lot about creating switches and profiles, but not about changing them)
    If No - how can I proceed?
    best regards
    Markus

    Yes, Network Sites can be added to Uplink Port Profiles that are in use.  The VM Networks for the associated Logical Networks will then be available for use by vNics connected to the Logical Switch using the updated Uplink Port Profile.

  • How to get Port Classifications for Logical Switch via scvmm console

    Hello  All,
    We are creating some automation tool based on SCVMM console scripts.
    In order to create vm we need to assign port classification  based on Virtual Switch and then logical switch. The problem is that I could not find any way to retrieve port classifications assigned to logical switch (Virtual Port tab in SCVMMs logical
    switch properties). There is Get-SCLogicalSwitch that return just name, description and some properties. There is also Get-SCUplinkPortProfileSet which returns Uplink tab data of SCVMMs logical switch properties. But no api to retrieve port classifications
    for switch. Get-SCPortClassification also doesn't return switch assignments. Any ideas how to get this data?

    I think you are looking for
    Get-SCVirtualNetworkAdapterPortProfileSet.
    This posting is provided "AS IS" with no warranties, and confers no rights. User assumes all risks.

  • HT1695 My iPhone is not giving me the option to use wifi it won't let me switch it from off to on

    My iPhone 4S won't give me the option to turn my wifi on it won't let me switch it from off to on

    http://support.apple.com/kb/TS1559

  • FAQ: Creating PDF Files from FrameMaker v.6 & earlier Documents -- Why you should not use "save as PDF"! -- Windows & MacOS Only!

    An issue that has come up over and over again on several FrameMaker and Acrobat/PDF email lists as well on the corresponding Adobe User-to-User forums is that of creation of PDF files. FrameMaker 5.5.6 and 6 have what looks like a convenient feature that is supposed to allow you to create PDF files via simply saving the document as a PDF file. I have gone on record as advising end-users not to use this approach for reliable creation of PDF files from FrameMaker documents under Windows and MacOS with FrameMaker 6 and earlier. Why do I most vociferously offer this advice and why doesn't the problem get fixed? And how SHOULD you create PDF files from FrameMaker?
    GOOD NEWS
    I will start with the good news. The "next major version" of FrameMaker will indeed have "save as PDF" re-implemented in a manner that it will be as reliable as printing to the "Acrobat Distiller" printer instance under Windows or the "Create Adobe PDF" desktop printer under MacOS. I am personally working with the FrameMaker development organization to make sure this really happens and is fully and properly tested and debugged! Furthermore, this next major revision of FrameMaker, unlike FrameMaker 6, will come with a Distiller installer that will properly install the "Acrobat Distiller" printer instance under Windows and the "Create Adobe PDF" desktop printer on the Macintosh (of course assuring that the latest PostScript driver is also automatically and correctly installed).
    DON'T USE "SAVE AS PDF"
    But what's wrong with "save as PDF" as currently implemented?
    The following are some of the SYMPTOMS reported over the last few years by FrameMaker users that were traced back to use of "save as PDF" under FrameMaker:
    (1) No PDF file is produced at all, possibly with a log file showing not-readily apparent PostScript errors during distillation.
    (2) The PDF file "loses" color in images. All or some images (raster, bitmap images, NOT vector artwork) appear in the PDF file in grayscale.
    (3) The resultant PDF file is on the wrong paper size, i.e., the document's logical page size does not match the output page size as seen in Acrobat or Acrobat Reader.
    (4) Some or all text in the resultant PDF file is blotchy looking or overly bold.
    (5) Some or all text in the resultant PDF file cannot be searched or indexed.
    (6) Some or all text in the resultant PDF file appears in Courier or in some other substitution font.
    (7) Interword or intercharacter spacing is a bit irregular in the resultant PDF file.
    (8) Content is missing in the margin areas of the page, i.e. you cannot do full-page bleeds.
    (9) Some or all page content is missing (other than margin areas).
    (10) Relatively inefficient PDF is generated.
    If this list by itself isn't enough for you, please note that some of these symptoms are very subtle and may escape attention when the PDF is first viewed or printed. Oftimes, it is when one attempts to manipulate the PDF file in Acrobat or repurpose its content or even view or print on a system other than the one on which the PDF file was created, that some of these symptoms make themselves obnoxiously visible (or invisible in some cases I won't make any bad jokes here about graphic examples!).
    It is important to understand that FrameMaker does NOT have its own native ability to create PDF. Any and all PDF created from FrameMaker documents is actually done by creating PostScript via the PostScript driver and having the Acrobat Distiller create PDF from that PostScript. The only exception to this is creation of PDF via the Acrobat PDFWriter driver, which is likewise not recommended (see below).
    In order for "save as PDF" to work correctly, FrameMaker must do the equivalent of calling Printer Setup and selecting the "Acrobat Distiller" printer instance under Windows or the "Create Adobe PDF" desktop printer under MacOS followed by setting the driver's options correctly for paper size, page range, etc., followed by sending the proper commands to the driver to create PostScript.
    Contrary to popular belief, PostScript as generated by the Windows and MacOS PostScript drivers is VERY device-dependent. The information in the PPD file associated with a printer driver instance provides critical parameters for generation of PostScript including:
    Whether the printer supports color (Acrobat Distiller does)
    What PostScript language level is supported (Acrobat Distiller 4.x and Acrobat Distiller 5.x are both PostScript language level 3)
    Whether native TrueType support is available (Acrobat supports native TrueType as Type 42 fonts)
    Available binary communications (Acrobat Distiller supports pure binary and ASCII, but NOT TCP, TBCP, or PJL)
    Resident fonts (Acrobat Distiller doesn't really have resident fonts)
    Available paper sizes and custom paper size availability (Acrobat Distiller supports a wide range of predefined sizes and continually variable "custom" sizes up to 200" by 200")
    Margins / printable areas (for PDF and the Acrobat Distiller, there are no margins in which imaging is not permitted)
    Device resolution (Acrobat Distiller can be set to any value from 72 to 4000 dpi; as a convenience, the Acrobat Distiller PPD provides a series of values for use by the driver. Since there is no inherent "resolution" of a PDF file, this parameter is used only for purposes of allowing PostScript programs that query for such a value to be satisfied and for the driver to be able to communicate this value to the operating system and/or application as required.)
    Paper handling (totally irrelevant to Acrobat Distiller if input or output tray selection via "setpagedevice" is found in the PostScript stream, it is ignored by Acrobat Distiller)
    Thus, if the wrong printer driver instance is selected (i.e., it isn't associated with the Acrobat Distiller PPD file) or that driver instance is improperly configured, improper PostScript will result and one or more of the symptoms described above can occur. As currently implemented, FrameMaker depending upon version will not necessarily choose the correct printer driver instance and/or correctly parameterize the print job via driver setup options. In fact, FrameMaker 5,5,6 might even try to generate PDF via calling a PCL driver, FAX driver, or even a non-PostScript inkjet printer!
    DON'T USE PDFWRITER
    The Acrobat PDFWriter is a relic of older versions of Acrobat. In fact, it is no longer installed by default in the "easy install" or the "typical install" of Acrobat 5. It hasn't really be updated since Acrobat 3 and only supports PDF 1.2. It is a GDI (Windows) / QuickDraw (MacOS) driver that directly generates PDF without any intermediary PostScript. Since it is not a PostScript printer driver, applications cannot pass through EPS graphics and/or PDFMark information (used for a wide variety of purposes by FrameMaker). For EPS graphics, most applications will send the low resolution TIFF (or PICT) EPS header in lieu of the PostScript text, if they send anything at all, to the driver. Forget about links, structure, or any other PDF "goodies." Expect that PDFWriter will fully "bite the dust" in the next major version of Acrobat.
    SO HOW DO I GENERATE PDF FILES FROM FRAMEMAKER 6 & EARLIER?
    The ONLY method that is really reliable for producing PDF files with FrameMaker 6 and earlier requires the generation of PostScript via a properly set printer driver instance associated with the Acrobat Distiller PPD and distillation of the resultant PostScript by Acrobat Distiller.
    Case 1: FrameMaker and the Full Acrobat 4.05 or Acrobat 5.0x Products
    PDF file from a "chapter" -- print directly to the Acrobat Distiller printer instance (Windows) or the Create Adobe PDF desktop printer (MacOS) already installed by Acrobat. If you check the "Acrobat data" option, then make sure to UNcheck the "print to file" option that gets set at the same time. As a result, the driver will automatically send the generated PostScript to the Distiller for you and delete the intermediate PostScript when done.
    PDF file from a "book" -- print directly to the Acrobat Distiller printer instance with the "print to file" option checked (Windows) or the Virtual Printer desktop printer (MacOS) associated with the Distiller PPD (see details below under Case 2/MacOS). You will need to manually process the resultant PostScript file through the Distiller (or use a "watched folder" arrangement).
    In both the above sub-cases, the default driver options generally will be OK, but check on paper size and communication protocol (Use pure binary, not ASCII, for optimal performance AND no CTRL-D characters under Windows. Make sure to set Level 3 only and Binary under MacOS. Font inclusion "All" for Acrobat 4.05 and "None" for Acrobat 5 under MacOS.). With Acrobat 4.05, make sure you preset the Distiller to use the joboptions you want. With Acrobat 5, you can set this on a job-by-job basis via the driver printer setup interface (or print dialog on MacOS).
    Case 2: FrameMaker 6 and the Bundled Acrobat 4.05 Distiller
    Windows -- Create a new printer driver instance using the latest version of the Adobe Universal PostScript Driver Installer, downloadable from Adobe's web site AND the Acrobat Distiller PPD file (located in the XTRAS subdirectory of the Distiller directory). This driver instance should be set to print to the local port named "FILE:". Name this driver instance as "Acrobat Distiller". The default driver options generally will be OK, but check on paper size and communication protocol (use pure binary, not ASCII, for optimal performance AND no CTRL-D characters). Make sure you preset the Distiller to use the joboptions you want. Print directly to this Acrobat Distiller printer instance. Make sure that the "print to file" option is checked. You will need to manually process the resultant PostScript file through the Distiller (or use a "watched folder" arrangement).
    MacOS -- Install the latest version of AdobePS 8.7.x, downloadable from Adobe's web site. In FrameMaker, go to Page Setup and select the "Virtual Printer" and go to the "Virtual Printer" window pane. Select the Acrobat Distiller PPD file (located in the XTRAS subfolder of the Distiller folder). Print directly to the "Virtual Printer" (Make sure to set Level 3 only, Binary, and font inclusion "All".). Make sure you preset the Distiller to use the joboptions you want. You will need to manually process the resultant PostScript file through the Distiller (or use a "watched folder" arrangement).
    Case 3: Acrobat 3
    Acrobat 3 is not officially supported for the latest OS versions and I personally would no longer recommend its use for generation of PDF files given that Acrobat 5.0.5 is the current version of Acrobat.
    - Dov

    You're asking a lot of ancient Acrobat to work with an Office that never existed when it was made. "Just updated my office suite" is a massive change, and Window 8 didn't exist at that time either...

  • Switching hardware from Dell to Apple. Use Mostly Windows

    I need a little help. Don't shoot until you read the end. I am a business owner who runs equipment dealerships in AZ and CA and also a gadget hound. Have had 20 PDA's, etc and am always looking for the best hardware setup. I have a Dell Lattitude D820 with docks at home and office with 24" monitors. Running Exchange Server and Small Business Server. Have switched to alot of Apple hardware including iPhone recently. I run Adobe Creative Suite, ACT, AutoCAD LT, etc. all in PC. Not a normal business owner user. Sometimes have them all open and going.  
    I will be using Windows for 90% of what I need to do.  I am concerned that if I buy a new MacBook Pro loaded up and I will be running Windows XP or Vista most of the time if I will be driving myself crazy without a dock. Bookendz doesnt count. Ex: In Windows mode, will the MacBook still awake upon jogging a bluetooth mouse, etc.? I want to make the switch but have a great setup now docking wise. However, the specs on my two year laptop don't hold up anymore.
    Any ideas on how this transition will be. Is there anyone else out there mostly using Windows on a Powerbook Pro with external monitors? Is it a hassle to plug and unplug the DVI connection, power, etc? I am thinking of getting two bluetooth keyboard and mouse setups and then using the power and DVI only. Seems simple. Again, I don't know how that will work with Windows mostly being on.

    Good question. A couple of things:
    No other laptop out there has the combination of size, power, design and features that the MacBook Pro (sorry) has that I can see. I can get a 512 meg video card but with a web cam, backlit keyboard and 1" high? Not from Dell. I can get the same processor and hard drive as well but in heavier configurations. I am obviously paying for design and weight and some features. The cons are the lack of dock and the price but I don't mind. I also do use the Leopard OS for personal stuff but even iTunes I will have to run in Windows as it syncs my iPhone with Outlook on Exchange through CompanionLink software. I like working in Leopard but right now my world is built around Windows. I also like the learning more about the Leopard OS. Does that help?

  • ABAP query using logical database KDF is not populating custom fields

    Hi Experts ,
    I created two following queries
    1.       VENDORCATKDF – uses KDF logical database
    2.       VENDORCATLFA1 – uses table = LFA1
    I’m pulling the same information in both queries:
    ·         Vendor Number
    ·         Country
    ·         Vendor Name
    ·         Vendor Category  (custom fields added to LFA1)
    The results for the query that uses the logical database KDF is incorrect.  It doesn’t pull in the flag on the custom field LFA1-ZMRO.   Even though the logical database KDF is made up of the table LFA1 and has these fields. 
    Is there something that can be done – so that all of these “custom” category fields under LFA1 (such as LFA1-ZZMRO) – get pulled into queries – when we use the logical database KDF ?

    Hi,
    I have got the error removed by ensuring that fields from one table are a part of one line ( taking help of ruler) only. But the underlying problem remains, the output is not ALV but List output.
    I do not think having additional fields in the query is reason for this.
    Is it bcoz iI am adjusting the output length of columns to ensure no hierarchical error ?
    Can we not have a query using LDB which is shown as SAP List?
    Regards,
    Garima.

  • Logical identifiant for User Notes synchronized from LDAP

    After a synchronization from LDAP to Notes,
    The user entry is created, all attributes are OK
    The certificate is created and named with %uid%.id
    BUT the logical name of the user in the Notes database is constructed as "%givenname%SPACEd/DOMAIN".
    I don't understand the SPACE and the character d ?
    Thanks for your help !
    BRs
    Vincent

    For analyze, we have synchronized 15 LDAP Users to Notes
    FirstName, Lastname and login attributes are from 1 to 15 characters lenght as following :
    givenname, lastname, UID
    1,1,1
    F2,L2,ID
    F33,L33,ID3
    F444,L444,ID44
    F5555,L5555,ID555
    F66666,L66666,ID6666
    F777777,L777777,ID77777
    F8888888,L8888888,ID888888
    F99999999,L99999999,ID9999999
    Faaaaaaaaa,Laaaaaaaaa,IDaaaaaaaa
    Fbbbbbbbbbb,Lbbbbbbbbbb,IDbbbbbbbbb
    Fccccccccccc,Lccccccccccc,IDcccccccccc
    Fdddddddddddd,Ldddddddddddd,IDddddddddddd
    Feeeeeeeeeeeee,Leeeeeeeeeeeee,IDeeeeeeeeeeee
    Fffffffffffffff,Lffffffffffffff,IDfffffffffffff
    Between 6 and 8 characters, le logical Name of the user is correct
    He is constructed as %fistname% %lastname%/DOMAIN
    Less than 6 or more than 8 characters, the logical name is not correct
    We can show the partial path of the lotus's data directory.
    I can send screenshot to an email Adress if you want
    Why this ? It's not usable
    PS : All certificates can be viewed without provide password !
    Why the LDAP password of the user's entry is not used to open the ID ?
    Thanks for your help.
    BRs
    Vincent

Maybe you are looking for