Sdlc configuration

hi
i have a RS232 device that connect to 2600 router and the router configuration is:
interface Serial0/1
no ip address
encapsulation sdlc
no keepalive
nrzi-encoding
clockrate 19200
sdlc role primary
sdlc vmac 4000.0018.6600
sdlc address A5
sdlc xid A5 05D018A5
sdlc partner 6600.0000.9918 A5
sdlc line-speed 19200
sdlc dlsw default
This is a cisco router with DLSW configuration and i have a problem with the work speed of the device,any operations took many time more than the same device how connect to ibm router,why that maybee configuration or ios.
please answer me.
it very urgent.
Thanks.

This question was also posted on the WAN Routing and Switching forum where it has gotten some responses. I suggest that we consolidate the discussion on the WAN forum.
HTH
Rick

Similar Messages

Service Registry SDLC import export of services

hi ,
I am intrested to know how is the SDLC process work in service registry?? I have a service in my test environment and is published to service registry test environment. Now I wanted to promote the service to production enviornment and publish it to production service registry env. How can I achieve this.
appreciate your help.
thanks
Srini

Hello Gourav,
Thank you for this information; it is very helpful.
However - the export appears to only include the entries in the namespace http://uddi.sap.com/classification. Since that is a protected namespace I am not able to create my custom classification values there. (I'm also going to assume that this namespace gets overwritten during system upgrades, so I would not want my custom values in it anyway.) Subsequently my custom values are in a separate namespace that does not seem to be included in the export process.
Is there a way to configure this export utility so that it retrieves the data from my namespace, rather than (or in addition to) the standard SAP namespace?
Thanks again,
-- Chris

DlSW/SDLC 1841 ROUTER.

I have just tried to implement by first 1841 router.
I used the same template that I have for over 400 sites ( 1600 , 1700 , 2500 and 3600 series routers )
I get the dlsw peers established no problem.
The problem is on the serial interface in the router.
It is an IBM 5494 controller .
Here is the configuration that I have for the serial interface.
I have added the routers configuration.
Any ideas??? Is there something that I need to add to the serial interface on the 1841's that was not required before ???
My IOS is (C1841-ENTBASE-M), Version 12.3(11)T2
tks.

Hi,
please open a case with the tac. There have been a few problems with sdlc and 12.3T, also there are some issues depending on the hardware you are using.
The Tac will help you to collect all the needed information to understand your problem and then guide you to a resolution.
thanks...
Matthias

How to handle DLSw for SDLC and token-ring to same remote peer

We have the need to have SDLC and token-ring connections from one local router to a the same remote site. Currently we have a remote peer for token-ring:
dlsw port-list 10 TokenRing0/0
dlsw remote-peer 10 tcp a.b.c.d lf 1500
We have an SDLC link on a serial port. I understand that SDLC is part of group 0. How do I also get the SDLC traffic to the same remote peer? Is it as simple as adding another remote peer statement to the same IP?
dlsw remote-peer 0 tcp a.b.c.d lf 1500

Do you have your token ring configuration complete to bridge to DLSW ?
for example;
source-bridge ring-group 2000
dlsw local-peer peer-id 150.150.10.1
dlsw remote-peer 0 tcp 150.150.10.2
interface loopback 0
ip address 150.150.10.1 255.255.255.0
interface serial 0
ip address 150.150.11.1 255.255.255.192
interface serial 1
description PU2 with SDLC station role set to secondary
no ip address
encapsulation sdlc
no keepalive
clockrate 9600
sdlc role primary
sdlc vmac 4000.9999.0100
sdlc address 01
sdlc xid 01 05d20006
sdlc partner 4000.1020.1000 01
sdlc dlsw 1
interface serial 2
description Node Type 2.1 with SDLC station role set to negotiable or primary
encapsulation sdlc
sdlc role prim-xid-poll
sdlc vmac 1234.3174.0000
sdlc address d2
sdlc partner 1000.5aed.1f53 d2
sdlc dlsw d2
interface tokenring 0
no ip address
ring-speed 16
source-bridge 100 1 2000
source-bridge spanning
If your SDLC link is working through DLSW (it is in DLSW ring group 10 according to your first configuration statement and port list statement and must match at both ends), it should be an easy modification to add the token ring configuration to join the bridge to the remote DLSW router.
See;
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fibm_c/bcfpart2/bcfdlsw.htm#1003756
best of luck

STUN: AS400 to FEP SDLC

I am having issues in brining up the connectivity between AS400 connecting to FEP using SDLC. I am trying to perform STUN SDLC on the 2800 routers with low speed WAN interfaces facing AS400 and FEP, here is the toplogy;
as400----R1-------R2-------FEP
The links are on Low speed serial interfaces 19.2 Kbps. The interface states are all up/up, but STUN is closed.
AS400 is configured in *SEC role.
Router configs are as follows;
R1 (Router facing AS400)
stun peer-name 192.168.213.32
stun protocol-group 1 sdlc
stun quick-response
(config-if serial 0/0/0)#
description connection to AS/400 SDLC PU 2.1 address C1
mtu 2104
no ip address
encapsulation stun
serial restart-delay 0
clock rate 19200
stun group 1
stun sdlc-role primary
sdlc address C1
stun route address C1 tcp 192.168.213.33 local-ack
R2 (Router facing FEP)
stun peer-name 192.168.213.33
stun protocol-group 1 sdlc
stun quick-response
(config-if serial 0/0/0)#
mtu 2104
no ip address
encapsulation stun
half-duplex
serial restart-delay 0
clock rate 19200
stun group 1
stun sdlc-role secondary
sdlc address C1
stun route address C1 tcp 192.168.213.32 local-ack
Could you please let me know if I am missing anything major in the topology or configurations.
I can also provide AS400 line and FEP configurations if required
thanks

its looks like ok...
i also had configure BSTUN for one of my project but its of multiple BSTUN group because its used for the Frame Relay topology... and i think you need only one group...
just look at this it may help you..
Building configuration...
bstun peer-name 10.1.1.1.
bstun protocol-group 1 async-generic
bstun protocol-group 2 async-generic
interface loopback 0
ip address 10.1.1.1
interface serial1/0
encapsulation frame-relay
interface serial 1/0.1 point-to-point
ip address 20.1.1.1 255.255.255.0
frame-relay interface-dlci 100
interface serial 1/0.2 point-to-point
ip address 20.2.1.1 255.255.255.0
frame-relay interface-dlci 200
interface serial 2/0
physical-layer async
encapsulation bstun
asp role secondary
bstun group 1
bstun route all tcp 30.1.1.1
interface serial 2/1
physical-layer async
encapsulation bstun
asp role secondary
bstun group 2
bstun route all tcp 30.2.1.1
ip route 30.2.1.0 255.255.0.0 20.2.1.2
ip route 0.0.0.0 0.0.0.0 20.1.1.2
line 65
speed 4800
parity even
databits 7
stopbits 1
line 66
speed 4800
parity even
databits 7
stopbits 1
end
and its same as for the other end...
hope this will help you
rate this post if it helps
regads
Devang

Qllc to sdlc conversion

I'm trying to do QLLC TO SDLC conversion for this setup:
Remote units using SDLC PADs to access a public x.25 network come to a x25 access in a Cisco router. From the router I have an SDLC connection to the Host.
It is working fine for one device, but I cannot make it working for 2 remote units at the same time. I cannot define more than 1 partner under the "qllc dlsw vmacaddr 0302.0302.10c1 3 partner 0303.0303.10c1". I know that I can use the subaddress field but this will not help as all the remote devices are calling the same addresses and there is no subaddress field.
Please advice,
Thanks,
Florin
version 11.2
service timestamps debug datetime
service timestamps log datetime
service password-encryption
no service udp-small-servers
no service tcp-small-servers
hostname QLLC_TEST
enable secret 5 <removed>
enable password 7 <removed>
no ip routing
source-bridge ring-group 999
dlsw local-peer
interface Serial0
no ip address
encapsulation x25
no ip route-cache
no ip mroute-cache
x25 address 99999999
x25 htc 5
x25 win 3
x25 wout 3
x25 ips 256
x25 ops 256
x25 map qllc 0302.0302.10c2 22222222 accept-reverse
x25 map qllc 0302.0302.10c3 33333333 accept-reverse
x25 map qllc 0302.0302.10c1 11111111 accept-reverse
qllc dlsw vmacaddr 0302.0302.10c1 3 partner 0303.0303.10c1
interface Serial1
no ip address
encapsulation sdlc
no ip route-cache
no ip mroute-cache
no keepalive
clockrate 2400
sdlc role secondary
sdlc vmac 0303.0303.1000
sdlc address C1
sdlc partner 0302.0302.10c1 C1
sdlc address C2
sdlc partner 0302.0302.10c2 C2
sdlc address C3
sdlc partner 0302.0302.10c3 C3
sdlc dlsw C1 C2 C3
interface TokenRing0
no ip address
no ip route-cache
no ip mroute-cache
shutdown
ring-speed 16
no ip classless
logging buffered 80000 debugging
bridge 1 protocol dec
line con 0
password 7 <removed>
login
line aux 0
line vty 0 4
password 7 <removed>
login
end
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-IS-L), Version 11.2(15a)P, P RELEASE SOFTWARE (fc1
Copyright (c) 1986-1998 by cisco Systems, Inc.
Compiled Tue 25-Aug-98 00:28 by kpma
Image text-base: 0x03030170, data-base: 0x00001000
ROM: System Bootstrap, Version 11.0(10c)XB1, PLATFORM SPECIFIC RELEASE SOFTWARE
(fc1)
BOOTFLASH: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c)XB1, PLATFORM
SPECIFIC RELEASE SOFTWARE (fc1)
QLLC_TEST uptime is 5 days, 8 hours, 1 minute
System restarted by power-on at 09:01:00 UTC Thu Jun 27 2002
System image file is "flash:c2500-is-l.112-15a.p", booted via flash
cisco 2525 (68030) processor (revision J) with 6144K/2048K bytes of memory.
Processor board ID 08868334, with hardware revision 00000000
Bridging software.
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
1 Token Ring/IEEE 802.5 interface(s)
2 Serial network interface(s)
5-in-1 module for Serial Interface 0
5-in-1 module for Serial Interface 1
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read ONLY)
Configuration register is 0x2102

I do not see any way you can do this without using subaddresses which will enable you to map to multiple partner mac addresses.

SDLC PU 2.0 and SNAsw

Hi all,
I would like to connect a 3174 controller on my roouter as follows:
3174---[SDLC on serial]---RTR---[SNAsw using HPR/IP]---OSA on MVS.
i have 3 questions:
1/ the 3174 use LLC2. So do i use sdllc command instead of sdlc command ?
2/ do i implement sdlc/sdllc xid C1 <IDBLK_IDNUM>?
2/ my MVS engineer said me that EE do not understand that SNA over LLC2 using SNAsw from router?
If it is possible, what is the VTAM configuration...
Thanks for answers

Hi ,
thanks it works. Therefore, i got an error when i simulate a VTAM crash.
*** 00012660 - EXCEPTION 512:276 (0) ****
Abnormal UNBIND request received
Sense code = 0x08A00008
Local LU name = TEST.ROUTER
Partner LU name = TEST.MVSA
Mode name = CPSVRMGR
UNBIND RU :
32FE08A0 0008601A CA5F93F0 AEC67B90 11C6D9E2 C9C3F0F0 F14BC6D9 E2C9C3F0
F0C33519 08A00008 000011C6 D9E2C9C3 F0F0F14B C6D9E2C9 C3F0F0C3 0093F0AE
C67B9012 04C6D9E2 C9C3F0F0 F14BC6D9 E2C9C3F0 F0C30010 C6D9E2C9 C3F0F0F1
4BD5E2C7 F0E7F2F5 601ACA5F 93F0AEC6 7B9011C6 D9E2C9C3 F0F0F14B C6D9E2C9
C3F0F0C3 2B340101 32461980 1510C6D9 E2C9C3F0 F0F14BD5 E2C7F0E7 F2F52180
00000203 88801483 10C6D9E2 C9C3F0F0 F14BD5E2 C7F0E7F2 F5002C0A 0708E2D5
C1E2E5C3 D4C73246 19801510 C6D9E2C9 C3F0F0F1 4BD5E2C7 F0E7F2F5 21800000
02038880 148310C6 D9E2C9C3 F0F0F14B D5E2C7F0 E7F2F500 2C0A0708 E2D5C1E2
E5C3D4C7 33333A32 352E3233 3920474D 542B313A 20333130 37373320 3A204D55
203A202D 2D283029 202D3E20 48505228 32313030 30303029 20512031 300A2A4D
61722020 35203034 3A33333A 32352E32 33392047 4D542B31 3A203331 30373734
203A204D 55203A20 48505228 32313030 30303029 202D3E20 52545028 32384130
30303029 20512031 0A2A4D61 72202035 2030343A 33333A32 352E3233 3920474D
542B313A 20333130 37373520 3A204D55 203A202D 2D283029 202D3E20 52545028
32384130 30303029 20512031 0A2A4D61 72202035 2030343A 33333A32 352E3233
3920474D 542B313A 20333130 37373620 3A204E4C 50203A20 52545028 32384130
sh snasw pu
Number of DLUR PUs 1
SNA DLUR PUs
PU Name PU ID State DLUS Name
1> P00004 017A0006 Pend DACTPU rsp
*Mar 5 06:50:23.830 GMT+1: %SNASW-6-RTP_LOG_1: INFO - 12912 - RTP Connection has disconnected
The SNAsw router wait DACTPU command to desactivate the 3174 sessions. How can i parameters the DACTPU timeout on the SNAsw router to reset the 3174 status on SDLC links ?
regards
SIlvere

Vtam OSA---Router7200------telco circuit----------Adapter SDLC SNAServ

Hi, I have this situation: Vtam OSA---Router7200------telco circuit----------Adapter SDLC SNAServerCLEO----- Does Somebody have a sample of configuration to VTAM and to SNA Server? This is a cofiguration to the router 7200. But i don´t know if is correct.
interface Serial0/1/2
description PU 2.1
mtu 4400
no ip address
encapsulation sdlc
sdlc role primary
sdlc vmac 0200.4e00.9000
sdlc address C1
sdlc xid c1 05d61000
sdlc partner 2000.4000.5000 C1
sdlc saps C1 0C 0C
sdlc dlsw C1
Help me please.
Thank you in advance.
Wmatta

Wimatta,
i think you can start here:
http://www.cisco.com/en/US/partner/tech/tk331/tk336/technologies_configuration_example09186a00801434cd.shtml
this is an example describing dlsw local switching between sdlc and ethernet. It has configuration examples for both pu2.0 and pu2.1.
Note:
Your example says in the description PU 2.1 but the configuration example you provided is for PU 2.0.
thanks...
Matthias

Airport can no longer read or write the configuration of Time Capsule

I have a MacBook Pro running OSX 10.8.3 and maintained with all available patches. I have also a Time Capsule with version 7.6.3 of the firmware. I use AirPort 6.2. So everything seems to be updated with the latest versions.
This has really been a good setup for nearly a year now, but earlier this month Time Machine suddenly stopped to work and could no longer do backups to the Time Capsule. I have tried to factory reset the Time Capsule several times, but I still get problems when writing the configuration to the Time Capsule. I get an error message saying "An error occurred while updating the configuration".
Airport is furthermore not able to detect the Time Capsule correctly anymore, so I have to configure it by entering the IP address. But after setting up WLAN, disks, etc. and enhanching the security, I just receive the error message when I try to write the config. The Internet connection works perfectly anyway, both via cable and wireless.
Anyone got any tips?

Do the setup by ethernet in full isolation from the network.
Start from a full factory reset.
I would recommend you take the firmware back to 7.6.1 or even earlier if the TC is older than 12months. 7.5.2 was very reliable. All these bugs started with 7.6 and the change to Lion.
I would also recommend installing 5.6 utility.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 (now 6.2 if you updated) so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.
For screen shots see this post.
https://discussions.apple.com/thread/4668746?tstart=0

Error while Provisioning a user to Exchange:Configuration OIM 9.1 & JBOSS

Hi,
I am facing the below error while provisioning a user to Exchange. The Resource gets provisioned. But inside the resource, two tasks (Create User & Set Mailbox) are rejected. When i retry these tasks, the Resource status is set to Revoked in the Resource Profile of OIM. The AD Provisioning is working fine. There are 2 AD IT Resources here. Database is Oracle 10g.
Error:
2012-03-02 15:06:10,347 INFO [org.apache.catalina.core.ContainerBase.[jboss.web].[localhost].[xlWebApp]] action: LogonAction: User 'RWFLORENCIO' logged on in session 8B825B2D391A654D975CDC91FECB5E8E
2012-03-02 15:06:34,712 INFO [STDOUT] Running GETFULLNAME
2012-03-02 15:06:34,712 INFO [STDOUT] Target Class = gitidm.LogProfileUser
2012-03-02 15:06:34,721 INFO [STDOUT] Running GETMANAGER
2012-03-02 15:06:34,721 INFO [STDOUT] Target Class = gitidm.LogProfileUser
2012-03-02 15:07:00,233 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzavri15-1iti
2012-03-02 15:07:00,233 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:07:00,233 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:07:55,208 INFO [STDOUT] Running IDMVALIDATION
2012-03-02 15:07:55,208 INFO [STDOUT] Target Class = gitidm.CustomApproval
2012-03-02 15:07:55,267 INFO [STDOUT] select USR_MANAGER_KEY from USR where USR_UDF_EMP_NO='540087'
2012-03-02 15:07:55,267 INFO [STDOUT] result : OK
2012-03-02 15:07:55,559 INFO [STDOUT] Running GETKEY
2012-03-02 15:07:55,559 INFO [STDOUT] Target Class = java.lang.String
2012-03-02 15:07:55,559 INFO [STDOUT] Running GETIH1
2012-03-02 15:07:55,559 INFO [STDOUT] Target Class = gitidm.CustomApproval
2012-03-02 15:07:55,614 INFO [STDOUT] select USR_MANAGER_KEY from USR where USR_UDF_EMP_NO='540087'
2012-03-02 15:08:00,207 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzavssb3-1itk
2012-03-02 15:08:00,207 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:08:00,207 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:08:16,901 INFO [STDOUT] Masuk exception
2012-03-02 15:08:16,988 DEBUG [org.jboss.ejb.StatelessSessionContainer] Useless invocation of remove() for stateless session bean
2012-03-02 15:08:17,000 DEBUG [org.jboss.ejb.StatelessSessionContainer] Useless invocation of remove() for stateless session bean
2012-03-02 15:08:17,016 DEBUG [org.jboss.ejb.StatelessSessionContainer] Useless invocation of remove() for stateless session bean
2012-03-02 15:08:17,030 DEBUG [org.jboss.ejb.StatelessSessionContainer] Useless invocation of remove() for stateless session bean
2012-03-02 15:08:17,046 DEBUG [org.jboss.ejb.StatelessSessionContainer] Useless invocation of remove() for stateless session bean
2012-03-02 15:08:17,304 INFO [org.apache.catalina.core.ContainerBase.[jboss.web].[localhost].[xlWebApp]] action: LogonAction: User 'XELSYSADM' logged on in session 8B825B2D391A654D975CDC91FECB5E8E
2012-03-02 15:09:00,192 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzavu2lc-1itr
2012-03-02 15:09:00,192 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:09:00,193 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:09:16,525 INFO [STDOUT] Running TOLOWERCASE
2012-03-02 15:09:16,526 INFO [STDOUT] Target Class = java.lang.String
2012-03-02 15:09:16,642 INFO [STDOUT] Running TOLOWERCASE
2012-03-02 15:09:16,643 INFO [STDOUT] Target Class = java.lang.String
2012-03-02 15:09:17,139 INFO [STDOUT] Running CHECKCHILDOBJECT
2012-03-02 15:09:17,139 INFO [STDOUT] Target Class = gitidm.CheckEmptyChild
2012-03-02 15:09:17,217 INFO [STDOUT] Connected to IAM
2012-03-02 15:09:17,218 INFO [STDOUT] Query : select * from UD_EMAILOF join obi on obi.obi_key=UD_EMAILOF.obi_key join UD_MAILFOC on UD_MAILFOC.UD_EMAILOF_KEY=UD_EMAILOF.UD_EMAILOF_KEY where obi.req_key='44002'
2012-03-02 15:09:17,228 INFO [STDOUT] Total record : 1
2012-03-02 15:09:17,228 INFO [STDOUT] Is Admin not filled the child form ? FILLED
2012-03-02 15:09:17,231 INFO [STDOUT] Disconnected from IAM
2012-03-02 15:09:17,606 INFO [STDOUT] Running SETPROXYADDRESS
2012-03-02 15:09:17,607 INFO [STDOUT] Target Class = email.Provisioning
2012-03-02 15:09:17,622 INFO [STDOUT] SetProxyAddressForSubsidiary
2012-03-02 15:09:17,622 INFO [STDOUT] Running INSERTTOLOG
2012-03-02 15:09:17,623 INFO [STDOUT] Target Class = gitidm.LogProvisioning
2012-03-02 15:09:17,701 INFO [STDOUT] Query Log= insert into IDM_PROV_LOG values (sysdate,'Request for Email Account','RWFLORENCIO','rwflorencio','Set Proxy Address','FAILED','NO')
2012-03-02 15:09:18,870 INFO [STDOUT] Running CHANGEDOMAINUSER
2012-03-02 15:09:18,870 INFO [STDOUT] Target Class = adir.Provisioning
2012-03-02 15:09:18,945 INFO [STDOUT] Running GETDNUSERPLDT
2012-03-02 15:09:18,945 INFO [STDOUT] Target Class = email.Provisioning
2012-03-02 15:09:18,961 INFO [STDOUT] GetDN
2012-03-02 15:09:18,991 INFO [STDOUT] GETDN():CN=FLORENCIO\, Raul W.,OU=PLDT Non-Executives,OU=Test Area,DC=ISSecLAB,DC=NET
2012-03-02 15:09:18,991 INFO [STDOUT] Running ENABLEMAILBOXPLDT
2012-03-02 15:09:18,991 INFO [STDOUT] Target Class = email.Provisioning
2012-03-02 15:09:19,019 INFO [STDOUT] EnableMailbox
2012-03-02 15:09:19,020 INFO [STDOUT] user ssh ->Administrator
2012-03-02 15:09:50,426 INFO [STDOUT] error ->Could not connect for 30000 milliseconds
2012-03-02 15:09:51,428 INFO [STDOUT] Disconnected: 192.168.1.72. Press Enter to exit
2012-03-02 15:09:51,428 INFO [STDOUT] Running INSERTTOLOG
2012-03-02 15:09:51,428 INFO [STDOUT] Target Class = gitidm.LogProvisioning
2012-03-02 15:09:51,502 INFO [STDOUT] Query Log= insert into IDM_PROV_LOG values (sysdate,'Request for Email Account','RWFLORENCIO','rwflorencio','Enable Mailbox','FAILED','Could not connect for 30000 milliseconds')
2012-03-02 15:09:53,940 INFO [STDOUT] Running SETMAILBOX
2012-03-02 15:09:53,940 INFO [STDOUT] Target Class = email.Provisioning
2012-03-02 15:09:53,959 INFO [STDOUT] userssh ->Administrator
2012-03-02 15:09:53,959 INFO [STDOUT] userid ->ISSECLAB\Administrator
2012-03-02 15:10:00,461 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzavvd3h-1itu
2012-03-02 15:10:00,462 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:10:00,462 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:10:00,577 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzavvd6p-1itv
2012-03-02 15:10:00,577 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:10:00,578 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:10:00,865 INFO [ADAPTER.AUTH_AD] Start initiate reconciliation info user
2012-03-02 15:10:00,865 INFO [ADAPTER.AUTH_AD] Start initiate reconciliation
2012-03-02 15:10:07,034 INFO [STDOUT] select usr.usr_key,usr.usr_password from usr left join GIT_AUTH_AD on GIT_AUTH_AD.usr_key=usr.usr_key where usr.usr_password != GIT_AUTH_AD.USR_PASSWORD
2012-03-02 15:10:25,353 INFO [STDOUT] Could not connect for 30000 milliseconds
2012-03-02 15:10:26,357 INFO [STDOUT] Disconnected: 192.168.1.72. Press Enter to exit
2012-03-02 15:11:00,222 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzavwn7i-1itx
2012-03-02 15:11:00,223 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:11:00,223 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:11:51,773 DEBUG [org.jboss.resource.connectionmanager.IdleRemover] run: IdleRemover notifying pools, interval: 450000
2012-03-02 15:12:00,219 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzavxxi3-1itz
2012-03-02 15:12:00,220 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:12:00,220 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:13:00,229 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzavz7t1-1iu2
2012-03-02 15:13:00,229 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:13:00,229 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:14:00,192 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzaw0i2o-1iu5
2012-03-02 15:14:00,192 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:14:00,193 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:14:02,974 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:14:02,974 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:14:02,975 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:14:02,975 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:14:02,975 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:14:53,473 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:14:53,473 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:14:53,474 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:14:53,474 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:14:53,474 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:15:00,249 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzaw1sex-1iu7
2012-03-02 15:15:00,249 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:15:00,249 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:15:00,591 INFO [ADAPTER.AUTH_AD] Start initiate reconciliation info user
2012-03-02 15:15:00,592 INFO [ADAPTER.AUTH_AD] Start initiate reconciliation
2012-03-02 15:15:00,727 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzaw1ss0-1iu9
2012-03-02 15:15:00,727 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:15:00,728 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:15:06,711 INFO [STDOUT] select usr.usr_key,usr.usr_password from usr left join GIT_AUTH_AD on GIT_AUTH_AD.usr_key=usr.usr_key where usr.usr_password != GIT_AUTH_AD.USR_PASSWORD
2012-03-02 15:15:18,066 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:15:18,075 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:15:18,075 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:15:18,076 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:15:18,076 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:16:00,220 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzaw32os-1iub
2012-03-02 15:16:00,221 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:16:00,221 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:16:00,536 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:16:00,537 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:16:00,537 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:16:00,538 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:16:00,539 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:17:00,200 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzaw4cyw-1iud
2012-03-02 15:17:00,200 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:17:00,201 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:18:00,209 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzaw5n9t-1iuf
2012-03-02 15:18:00,210 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:18:00,210 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:19:00,211 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzaw6xkj-1iuh
2012-03-02 15:19:00,212 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:19:00,212 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:19:21,833 DEBUG [org.jboss.resource.connectionmanager.IdleRemover] run: IdleRemover notifying pools, interval: 450000
2012-03-02 15:20:00,500 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzaw8838-1iuk
2012-03-02 15:20:00,501 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:20:00,501 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:20:00,673 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzaw8881-1iul
2012-03-02 15:20:00,674 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:20:00,674 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:20:00,930 INFO [ADAPTER.AUTH_AD] Start initiate reconciliation info user
2012-03-02 15:20:00,931 INFO [ADAPTER.AUTH_AD] Start initiate reconciliation
2012-03-02 15:20:07,489 INFO [STDOUT] select usr.usr_key,usr.usr_password from usr left join GIT_AUTH_AD on GIT_AUTH_AD.usr_key=usr.usr_key where usr.usr_password != GIT_AUTH_AD.USR_PASSWORD
2012-03-02 15:21:00,306 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzaw9i8g-1iun
2012-03-02 15:21:00,306 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:21:00,306 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:22:00,281 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzawasih-1iup
2012-03-02 15:22:00,282 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:22:00,282 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:23:00,303 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzawc2tl-1iur
2012-03-02 15:23:00,304 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:23:00,304 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:23:27,310 INFO [STDOUT] Running CHANGEDOMAINUSER
2012-03-02 15:23:27,312 INFO [STDOUT] Target Class = adir.Provisioning
2012-03-02 15:23:27,413 INFO [STDOUT] Running GETDNUSERPLDT
2012-03-02 15:23:27,414 INFO [STDOUT] Target Class = email.Provisioning
2012-03-02 15:23:27,432 INFO [STDOUT] GetDN
2012-03-02 15:23:27,473 INFO [STDOUT] GETDN():CN=FLORENCIO\, Raul W.,OU=PLDT Non-Executives,OU=Test Area,DC=ISSecLAB,DC=NET
2012-03-02 15:23:27,473 INFO [STDOUT] Running ENABLEMAILBOXPLDT
2012-03-02 15:23:27,474 INFO [STDOUT] Target Class = email.Provisioning
2012-03-02 15:23:27,495 INFO [STDOUT] EnableMailbox
2012-03-02 15:23:27,496 INFO [STDOUT] user ssh ->Administrator
2012-03-02 15:23:55,851 WARN [org.jboss.tm.TransactionImpl] Transaction TransactionImpl:XidImpl[FormatId=257, GlobalId=oim1.isseclab.net/5544083, BranchQual=, localId=5544083] timed out. status=STATUS_ACTIVE
2012-03-02 15:23:55,874 WARN [XELLERATE.DATABASE] Trying to get the connection count : 0
2012-03-02 15:23:55,875 WARN [XELLERATE.DATABASE] Trying to get the connection count : 1
2012-03-02 15:23:55,876 WARN [XELLERATE.DATABASE] Trying to get the connection count : 2
2012-03-02 15:23:55,877 WARN [XELLERATE.DATABASE] Trying to get the connection count : 3
2012-03-02 15:23:55,878 WARN [XELLERATE.DATABASE] Trying to get the connection count : 4
2012-03-02 15:23:55,878 ERROR [XELLERATE.DATABASE] Class/Method: DirectDB/getConnection encounter some problems: Error while retrieving database connection.Please check for the follwoing
Database srever is running.
Datasource configuration settings are correct.
2012-03-02 15:23:55,878 ERROR [XELLERATE.DATABASE] Class/Method: tcDataBase/readPartialStatement encounter some problems: Got a null connection
java.sql.SQLException: Got a null connection
     at com.thortech.xl.dataaccess.tcDataBase.readPartialStatement(Unknown Source)
     at com.thortech.xl.dataobj.tcDataBase.readPartialStatement(Unknown Source)
     at com.thortech.xl.dataaccess.tcDataSet.executeQuery(Unknown Source)
     at com.thortech.xl.dataobj.tcDataSet.executeQuery(Unknown Source)
     at com.thortech.xl.dataaccess.tcDataSet.executeQuery(Unknown Source)
     at com.thortech.xl.dataobj.tcDataSet.executeQuery(Unknown Source)
     at com.thortech.xl.cache.CacheUtil.getSetCachedQuery(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.eventPostInsert(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
     at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
     at com.thortech.xl.dataobj.tcScheduleItem.insertImplementation(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
     at com.thortech.xl.attestation.AttestationEngine.attestTask(Unknown Source)
     at com.thortech.xl.attestation.AttestationEngine.updateResponses(Unknown Source)
     at com.thortech.xl.ejb.beansimpl.AttestationOperationsBean.updateResponses(Unknown Source)
     at com.thortech.xl.ejb.beans.AttestationOperationsSession.updateResponses(Unknown Source)
     at sun.reflect.GeneratedMethodAccessor1129.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
     at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionContainer.java:237)
     at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionInterceptor.java:158)
     at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstanceInterceptor.java:169)
     at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
     at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
     at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:350)
     at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
     at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
     at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
     at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor.java:138)
     at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
     at org.jboss.ejb.Container.invoke(Container.java:960)
     at sun.reflect.GeneratedMethodAccessor132.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155)
     at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94)
     at org.jboss.mx.server.Invocation.invoke(Invocation.java:86)
     at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264)
     at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659)
     at org.jboss.invocation.local.LocalInvoker$MBeanServerAction.invoke(LocalInvoker.java:169)
     at org.jboss.invocation.local.LocalInvoker.invoke(LocalInvoker.java:118)
     at org.jboss.invocation.InvokerInterceptor.invokeLocal(InvokerInterceptor.java:209)
     at org.jboss.invocation.InvokerInterceptor.invoke(InvokerInterceptor.java:195)
     at org.jboss.proxy.TransactionInterceptor.invoke(TransactionInterceptor.java:61)
     at org.jboss.proxy.SecurityInterceptor.invoke(SecurityInterceptor.java:70)
     at org.jboss.proxy.ejb.StatelessSessionInterceptor.invoke(StatelessSessionInterceptor.java:112)
     at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:100)
     at $Proxy744.updateResponses(Unknown Source)
     at Thor.API.Operations.AttestationOperationsClient.updateResponses(Unknown Source)
     at sun.reflect.GeneratedMethodAccessor1128.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
     at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source)
     at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
     at $Proxy785.updateResponses(Unknown Source)
     at com.thortech.xl.schedule.tasks.tcTskSubmitAttestationRequets.execute(Unknown Source)
     at com.thortech.xl.scheduler.tasks.SchedulerBaseTask.run(Unknown Source)
     at com.thortech.xl.scheduler.core.quartz.QuartzWrapper$TaskExecutionAction.run(Unknown Source)
     at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source)
     at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.execute(Unknown Source)
     at org.quartz.core.JobRunShell.run(JobRunShell.java:203)
     at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
2012-03-02 15:23:55,885 ERROR [XELLERATE.SERVER] Class/Method: tcDataObj/eventPreInsert encounter some problems: Data Access Error
com.thortech.xl.dataaccess.tcDataSetException: Data Access Error
     at com.thortech.xl.dataaccess.tcDataSet.executeQuery(Unknown Source)
     at com.thortech.xl.dataobj.tcDataSet.executeQuery(Unknown Source)
     at com.thortech.xl.dataaccess.tcDataSet.executeQuery(Unknown Source)
     at com.thortech.xl.dataobj.tcDataSet.executeQuery(Unknown Source)
     at com.thortech.xl.cache.CacheUtil.getSetCachedQuery(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.eventPostInsert(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
     at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
     at com.thortech.xl.dataobj.tcScheduleItem.insertImplementation(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
     at com.thortech.xl.attestation.AttestationEngine.attestTask(Unknown Source)
     at com.thortech.xl.attestation.AttestationEngine.updateResponses(Unknown Source)
     at com.thortech.xl.ejb.beansimpl.AttestationOperationsBean.updateResponses(Unknown Source)
     at com.thortech.xl.ejb.beans.AttestationOperationsSession.updateResponses(Unknown Source)
     at sun.reflect.GeneratedMethodAccessor1129.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
     at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionContainer.java:237)
     at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionInterceptor.java:158)
     at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstanceInterceptor.java:169)
     at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
     at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
     at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:350)
     at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
     at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
     at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
     at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor.java:138)
     at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
     at org.jboss.ejb.Container.invoke(Container.java:960)
     at sun.reflect.GeneratedMethodAccessor132.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155)
     at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94)
     at org.jboss.mx.server.Invocation.invoke(Invocation.java:86)
     at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264)
     at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659)
     at org.jboss.invocation.local.LocalInvoker$MBeanServerAction.invoke(LocalInvoker.java:169)
     at org.jboss.invocation.local.LocalInvoker.invoke(LocalInvoker.java:118)
     at org.jboss.invocation.InvokerInterceptor.invokeLocal(InvokerInterceptor.java:209)
     at org.jboss.invocation.InvokerInterceptor.invoke(InvokerInterceptor.java:195)
     at org.jboss.proxy.TransactionInterceptor.invoke(TransactionInterceptor.java:61)
     at org.jboss.proxy.SecurityInterceptor.invoke(SecurityInterceptor.java:70)
     at org.jboss.proxy.ejb.StatelessSessionInterceptor.invoke(StatelessSessionInterceptor.java:112)
     at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:100)
Please help as its really urgent!

Hey guys! 2 days and no replies yet. please help me with this.

Configuring requirement : ordered item to absorb cost of free goods

Hello Friends,
I need to configure this in SAP SD.
The main item should accumulate the cost of the free goods.
I have set the cumulative indicator and deactivated pring for this item.
Do i still need to configure the stock value for the free goods as cost free item? Or is this step only applicable for
another scenario, like,
If I were to activate Pricing such that free goods is displayed as subitem and VPRS configured as cost and discount set to 100%
1. Set Item category to TANN using FREE usage AND
2. use condition type RL00 with requirement 55.
3. use pricing type B.
regards
Ravi

Read this SAP help at http://help.sap.com/saphelp_47x200/helpdata/en/dd/55fa4e545a11d1a7020000e829fd11/frameset.htm and the topic Free Goods in Sales and Distribution Processing for details.
Also go through each step of the configuration of the path at SPRO->Sales and distribution->basic functions->free goods.
Regards,

Partner application configuration is missing error on SSO login page

We have APEX 3.1.2 setup as a partner application and an application within APEX setup to use SSO for authentication. Following a link to the APEX application redirects to the Single Sign-On page, as it should, but it also shows "Error: The partner application configuration is missing or expired." I type in my password and username, click the Login button, and (if I entered my username and password correctly, of course!) then the APEX application is shown. So, I cannot figure out why we're getting the no_papp_err error and I have not found any solutions to that issue on Metalink or anywhere else on the Internet. Any ideas? I'm concerned that we have a misconfiguration somewhere that is causing this error and will affect any other partner application we setup in the future.
We're on Oracle Portal 10.1.4, SSO 10.1.2, and SSL is setup on both infra and mid tiers.

Did you try checking the partner application entries on the SSO-login server page?
please login as orcladmin or some other user with membership in, i beleive, iasadmins group. verify that for this partner application, what you see here corresponds to the application URL. it looks like your login page call may have issues. so check for login url too.
also check the ORASSO.WWSSO_LS_CONFIGURATION_INFO$ for entries corresponding to Apex application.

SharePoint Foundation 2013 - Search Configuration Issue - 2 App Servers and 2 Front-End Servers

Hi,
We have a SharePoint Foundation 2013 with SP1 Environment.
In that, we have 2 Front-End Servers and 2 App Servers. In the Front-End Servers, the Search Service is stopped and is in Disabled state and in the 2 App Servers in One App Server, Search is Online and in another Search is Starting but goes to Stopped sooon
after.
Originally, we had only 1 App Server and we were running our Search Service and Search Service Application in that. Now since the index location became full and we were unable to increase the drive there, we added one more App Server and now the issue is
Search is not properly getting configured in either of these App servers. What we want to do is run Search only in the new App Server, because we have a lot of storage space for Index locations here, but in the older App Server, not run Search at all. We
tried keeping the Search Service disabled and ran the below PowerShell Scripts, but none of the ones are working. These scripts are creating the Search Service Application, but the error of "Admin Component is not Online", "Could not connect
to the machine hosting SharePoint 2013 admin component" is coming up.
http://www.funwithsharepoint.com/provision-search-for-sharepoint-foundation-2013-using-powershell-with-clean-db-names/
http://blog.falchionconsulting.com/index.php/2013/02/provisioning-search-on-sharepoint-2013-foundation-using-powershell/
http://blog.ciaops.com/2012/12/search-service-on-foundation-2013.html
Can I get some help please?
Karthick S

Hi Karthick,
For your issue, could you provide the
detail error message of ULS log to determine the exact cause of the error?
For SharePoint 2013, by default, ULS log is at
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS
For troubleshooting your issue, you can try to run the SharePoint Products Configuration Wizard on your WFE servers and run the script for configuring the search service on SharePoint
Foundation:
[string]$farmAcct = "DOMAIN\service_Account"
[string]$serviceAppName = "Search Service Application"
Function WriteLine
Write-Host -ForegroundColor White "--------------------------------------------------------------"
Function ActivateAndConfigureSearchService
Try
# Based on this script : http://blog.falchionconsulting.com/index.php/2013/02/provisioning-search-on-sharepoint-2013-foundation-using-powershell/
Write-Host -ForegroundColor White " --> Configure the SharePoint Foundation Search Service -", $env:computername
Start-SPEnterpriseSearchServiceInstance $env:computername
Start-SPEnterpriseSearchQueryAndSiteSettingsServiceInstance $env:computername
$appPool = Get-SPManagedAccount -Identity $farmAcct
New-SPServiceApplicationPool -Name SeachApplication_AppPool -Account $appPool -Verbose
$saAppPool = Get-SPServiceApplicationPool -Identity SeachApplication_AppPool
$svcPool = $saAppPool
$adminPool = $saAppPool
$searchServiceInstance = Get-SPEnterpriseSearchServiceInstance $env:computername
$searchService = $searchServiceInstance.Service
$bindings = @("InvokeMethod", "NonPublic", "Instance")
$types = @([string],
[Type],
[Microsoft.SharePoint.Administration.SPIisWebServiceApplicationPool],
[Microsoft.SharePoint.Administration.SPIisWebServiceApplicationPool])
$values = @($serviceAppName,
[Microsoft.Office.Server.Search.Administration.SearchServiceApplication],
[Microsoft.SharePoint.Administration.SPIisWebServiceApplicationPool]$svcPool,
[Microsoft.SharePoint.Administration.SPIisWebServiceApplicationPool]$adminPool)
$methodInfo = $searchService.GetType().GetMethod("CreateApplicationWithDefaultTopology", $bindings, $null, $types, $null)
$searchServiceApp = $methodInfo.Invoke($searchService, $values)
$searchProxy = New-SPEnterpriseSearchServiceApplicationProxy -Name "$serviceAppName - Proxy" -SearchApplication $searchServiceApp
$searchServiceApp.Provision()
catch [system.exception]
Write-Host -ForegroundColor Yellow " ->> Activate And Configure Search Service caught a system exception"
Write-Host -ForegroundColor Red "Exception Message:", $_.Exception.ToString()
finally
WriteLine
ActivateAndConfigureSearchService
Reference:
https://sharepointpsscripts.codeplex.com/releases/view/112556
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected].
Eric Tao
TechNet Community Support

Problem when we created the managed server to configure different ports.

I am trying to configure different ports for admin console and my communication service as we can’t share admin port to the outside world.
So that only admin can access admin console using admin port.
And out side clients can access my webapplication using different port.
For this i have created the managed server in weblogic.and I deployed the application on managed server.
Now admin server is running on 8001 port and my Communication Service application is running on 7001 port.
But when I tried to configure MBeans related to myCommunicationServiceApplication those were disapper on admin console. And the other wlng services are appearing on admin console.
1. Since my application deployed on managed server MBeans registration happened from myapplication hence it’s disappear on admin console.
Now If I want to configure Mbeans (related to my communication service) how can I configure it?
2. My communication service using configurationStore module and other wlng services.
When I tried to start my application on managed server I got the below error:
<Apr 28, 2009 12:22:44 PM IST> <Error> <Deployer> <BEA-149231> <dscp11166.TechMahindra.com> <Unable to set the activation state to true for the application 'wlng_nt_qualcomm_active_mediation [Version=1.0]'.
com.bea.wlcp.wlng.api.storage.configuration.ConfigurationException: Configuration store module is not available.
3. I tried to target all wlngResources to manged server by editing config.xml file.
Then all wlng services disappears on admin console. If this is the case how can I configure container/account services on wlng?
I have created the Basicweblogic domain.
Below is the config.xml for reference.
"QualcommServer" is managed server name.
Can any one please suggest me how to configure this kind of scenarios?
<server>
<name>AdminServer</name>
<machine>new_Machine_1</machine>
<listen-port>8001</listen-port>
<default-iiop-user>weblogic</default-iiop-user>
<default-iiop-password-encrypted>{3DES}W8nBdoJPRZ8TkwcXwAZoxA==</default-iiop-password-encrypted>
<listen-address>localhost</listen-address>
</server>
<server>
<name>QualcommServer</name>
<machine>new_Machine_1</machine>
<listen-address>localhost</listen-address>
<server-start>
<java-vendor>Sun</java-vendor>
<java-home>C:\Program Files\Java\jdk1.6.0</java-home>
<class-path>C:\bea\wlng400\server\lib\weblogic.jar;C:\bea\wlng_pds400\lib\wlng\wlng.jar</class-path>
<bea-home>C:\bea</bea-home>
<username>weblogic</username>
<password-encrypted>{3DES}W8nBdoJPRZ8TkwcXwAZoxA==</password-encrypted>
</server-start>
</server>
<embedded-ldap>
<name>managedserver</name>
<credential-encrypted>{3DES}9q80YuFJueVVJxoWduJA1OGhbqk14EpgQWWyTrzlmxo=</credential-encrypted>
</embedded-ldap>
<configuration-version>10.0.1.0</configuration-version>
<app-deployment>
<name>wlng_nt_session#4.0</name>
<target>QualcommServer</target>
<module-type>ear</module-type>
<source-path>C:\bea\wlng400/applications/wlng_nt_session.ear</source-path>
<security-dd-model>CustomRolesAndPolicies</security-dd-model>
</app-deployment>
<app-deployment>
<name>interceptors</name>
<target>QualcommServer</target>
<module-type>ear</module-type>
<source-path>C:\bea\wlng400/applications/interceptors.ear</source-path>
<security-dd-model>CustomRolesAndPolicies</security-dd-model>
</app-deployment>
<app-deployment>
<name>wlng_prm</name>
<target>QualcommServer</target>
<module-type>ear</module-type>
<source-path>C:\bea\wlng400/applications/wlng_prm.ear</source-path>
<security-dd-model>CustomRolesAndPolicies</security-dd-model>
</app-deployment>
<app-deployment>
<name>wlng_nt_qualcomm_active_mediation#1.0</name>
<target>QualcommServer</target>
<module-type>ear</module-type>
<source-path>servers\AdminServer\upload\wlng_nt_qualcomm_active_mediation.ear</source-path>
<security-dd-model>DDOnly</security-dd-model>
</app-deployment>
<machine>
<name>new_Machine_1</name>
<node-manager>
<name>new_Machine_1</name>
<listen-address>localhost</listen-address>
</node-manager>
</machine>
<jms-server>
<name>JMSServer-AdminServer</name>
<target>AdminServer</target>
</jms-server>
<jms-system-resource>
<name>WLNGJMSResource</name>
<target>QualcommServer</target>
<descriptor-file-name>jms/wlng-jms.xml</descriptor-file-name>
</jms-system-resource>
<custom-resource>
<name>networktier</name>
<target>AdminServer</target>
<descriptor-file-name>custom/nt.xml</descriptor-file-name>
<resource-class>com.bea.wlcp.wlng.management.descriptor.resource.WlngTierResource</resource-class>
<descriptor-bean-class>com.bea.wlcp.wlng.management.descriptor.bean.WlngTierBean</descriptor-bean-class>
</custom-resource>
<custom-resource>
<name>wlng-edr</name>
<target>AdminServer</target>
<descriptor-file-name>custom/wlng-edr.xml</descriptor-file-name>
<resource-class>com.bea.wlcp.wlng.management.descriptor.resource.WlngEdrResource</resource-class>
<descriptor-bean-class>com.bea.wlcp.wlng.management.descriptor.bean.WlngEdrBean</descriptor-bean-class>
</custom-resource>
<admin-server-name>AdminServer</admin-server-name>
<jdbc-system-resource>
<name>wlng.datasource</name>
<target>QualcommServer</target>
<descriptor-file-name>jdbc/wlng-jdbc.xml</descriptor-file-name>
</jdbc-system-resource>
<jdbc-system-resource>
<name>wlng.localTX.datasource</name>
<target>QualcommServer</target>
<descriptor-file-name>jdbc/wlng-localTX-jdbc.xml</descriptor-file-name>
</jdbc-system-resource>
Thanks,
Srinu Babu P

Dear Nariharan,
Today I faced a simlar issue, and this SAP Note helped me fix it: 1966807 - Duplication of AET table records in change processing
In my case, cardinality of AET table was 1:1, and I was getting duplicate PARENT_ID every time when trying to create a subsequent service request for my activity.
Regards,
Andrew

I am trying to configure two WRV200 from 2 different loca...

I am trying to configure two WRV200 from 2 different location and ADSL
accounts. One location has PPPoE and the other has PPPoA. Both of it are
having a Speedtouch 356 6V modem. The router which using PPPoE and having a DDNS from TZO.com has no problem with the Quick VPN but the router which using a PPPoA connection could not able to connect even the quick VPN.
There is an option to ridirect the Public IP of Speedtouch to other network device and I manage to configure it and now my router who is having a PPPoA connection has a Public IP. But still the same problem VPN still not working.
Is there any chance that I could make this router work with the PPPoA connection. I will really appreciate if somebody could help me with this problem.

Sorry for making you confuse. Here is the VPN log details of the 2 routers.
Router 1:
000 "TunnelA": srcip=unset; dstip=unset; srcup=ipsec _updown; dstup=ipsec _updown;
000 "TunnelA": ike_life: 28800s; ipsec_life: 3600s; rekey_margin: 5s; rekey_fuzz: 100%; keyingtries: 5
000 "TunnelA": policy: PSK+ENCRYPT+TUNNEL+PFS+UP+AGGRESSIVE; prio: 24,24; interface: eth0; 000 "TunnelA": dpd: action:hold; delay:30; timeout:120;
000 "TunnelA": newest ISAKMP SA: #0; newest IPsec SA: #0;
000 "TunnelA": IKE algorithms wanted: 5_000-1-2, flags=strict
000 "TunnelA": IKE algorithms found: 5_192-1_096-2,
000 "TunnelA": ESP algorithms wanted: 3_000-1, flags=strict
000 "TunnelA": ESP algorithms loaded: 3_000-1, flags=strict
000 #12: "TunnelA":500 STATE_AGGR_I1 (sent AI1, expecting AR1); EVENT_RETRANSMIT in 9s; nodpd
000 #12: pending Phase 2 for "TunnelA" replacing #0
Router 2:
000 "TunnelA": srcip=unset; dstip=unset; srcup=ipsec _updown; dstup=ipsec _updown;
000 "TunnelA": ike_life: 28800s; ipsec_life: 3600s; rekey_margin: 540s; rekey_fuzz: 100%; keyingtries: 3
000 "TunnelA": policy: PSK+ENCRYPT+TUNNEL+UP+AGGRESSIVE; prio: 24,24; interface: ppp0;
000 "TunnelA": dpd: action:restart; delay:30; timeout:120;
000 "TunnelA": newest ISAKMP SA: #0; newest IPsec SA: #0;
000 "TunnelA": IKE algorithms wanted: 5_000-1-2, flags=strict
000 "TunnelA": IKE algorithms found: 5_192-1_096-2,
000 "TunnelA": ESP algorithms wanted: 3_000-1, flags=strict
000 "TunnelA": ESP algorithms loaded: 3_000-1, flags=strict
000 #3: "TunnelA":500 STATE_AGGR_I1 (sent AI1, expecting AR1); EVENT_RETRANSMIT in 8s; nodpd
000 #3: pending Phase 2 for "TunnelA" replacing #0
Hope this could help you.

Sdlc configuration

Similar Messages

Maybe you are looking for