SDM Connectivity - Urgent
Hi,
Caused by: java.security.NoSuchAlgorithmException: No such algorithm: PbeWithSHAAnd3_KeyTripleDES_CBC
at javax.crypto.SunJCE_b.c(DashoA12275)
at javax.crypto.SunJCE_b.a(DashoA12275)
at javax.crypto.Cipher.a(DashoA12275)
at javax.crypto.Cipher.getInstance(DashoA12275)
at com.sap.security.core.server.secstorefs.Crypt.<init>(Crypt.java:220)
at com.sap.security.core.server.secstorefs.SecStoreFS.<init>(SecStoreFS.java:1346)
at com.sap.sql.connect.OpenSQLConnectInfo.getStore(OpenSQLConnectInfo.java:798)
... 27 more
Jan 16, 2008 5:31:48 PM Warning: Caught CVersProxyAccessException while saving repository: CVersAccessException: Cannot acces
s CVers due to missing or incorrect configuration.
Additional error message is:
com.sap.sdm.apiint.serverext.servertype.TargetServiceException: Cannot provide connect data for database target system "CONFIG
_DB".
Additional error message is:
com.sap.sdm.serverext.servertype.dbsc.DatabaseConnectException: Creation of DataSource for database "EPG" failed. (com.sap.sql
.log.OpenSQLException: Error while accessing secure store: Encryption or decryption is not possible because the full version o
f the SAP Java Crypto Toolkit was not found (iaik_jce.jar is required, iaik_jce_export.jar is not sufficient) or the JCE Juris
diction Policy Files don't allow the use of the "PbeWithSHAAnd3_KeyTripleDES_CBC" algorithm..)
Jan 16, 2008 5:32:03 PM Info: Actions per selected component:
Jan 16, 2008 5:32:03 PM Info: Initial deployment: Selected software component 'BP_ERP5ESS'/'sap.com'/'MAIN_ERP05VAL_C'/'1000.
1.0.10.0.20070704092730''/'2' will be deployed.
Jan 16, 2008 5:32:03 PM Info: Initial deployment: Selected development component 'ess/bp_ess'/'sap.com'/'MAIN_ERP05VAL_C'/'11
99208'/'2' will be deployed.
Jan 16, 2008 5:32:03 PM Info: Initial deployment: Selected development component 'ess/bp_essrowo'/'sap.com'/'MAIN_ERP05VAL_C'
/'1199211'/'2' will be deployed.
Regards,
Basis
Hi,
Refer SAP Note 1071472 - FileSystem SecureStore connection issues.
Go to folder /sapmnt/<SID>/global/security/lib/tools, you will find iaik_jce.jar & iaik_jce_export.jar check whether thease are latest one's if not download & replace with new one.
Try removing the file iaik_jce_export.jar, it worked for me once.
Hope this will help you.
Best Regards,
Sachin.
Similar Messages
-
Computer restarts when ipod is connected urgent help needed
alright this is weird, I've had my ipod for ages and suddenly I go to plug it in and the computer slows down really really really slow and eventually just turns it self off, restarts and then sits in a black screen. if I leave the ipod plugged into the computer and restart it again it just goes straight back to the black screen, but both my ipod and computer work fine when there not connected. i have the latest version of itunes which seemed to help the first time i tried it actually started to update the ipod but then guess what the computer has another heart attack. urgent help needed please!!!
if I leave the ipod plugged into the computer and restart it again it just goes straight back to the black screen
Given this, I'd put it down to a flaky power supply in the computer. Might want to try using another computer or replacing the PSU. -
Hi, I`m having this message after installing SAP Web Application Server Java 6.40(J2EE Engine)
First of all it asks for a password, which I typed sdm and tried other fo the OS users and always get this error
ERROR: Could not establish connection to server XXX at port 50018: Connection refused: connect
I would appreciate your help
Regards,
Gino AriasHi,
See this two thread:
Connecting to EJB
Connecting to EJB
Regards
Suresh KB -
I am getting the error while creating the JCO connection -Urgent
Hi iam gettng the following error. Can any body identify what will be the error.
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM TYPE=B MSHOST=buzzard GROUP=SPACE R3NAME=MT4 MSSERV=sapmsMT4 PCS=1 ERROR service 'sapmsMT4' unknown TIME Mon Oct 22 20:01:09 2007 RELEASE 700 COMPONENT NI (network interface) VERSION 38 RC -3 MODULE ninti.c LINE 530 DETAIL NiPGetServByName2: service 'sapmsMT4' not found SYSTEM CALL getservbyname_r COUNTER 3
VijayHi,
One small correction and addition. Check for group 'SPACE'. Check for appropriate entry in services and also hosts file from C:\WINDOWS\system32\drivers\etc. If possible, restart both the servers and check.
Regards,
Harini S -
Hi There
Please anyone can send document for RFC Connections,How to change and maintain username and password.
And also send me the Doc's for Return table.
Please forward to [email protected] or [email protected]
Thansk in advance.
Regards.
Chandu.To change the RFC user and password you can simply go in SM59.
http://help.sap.com/saphelp_47x200/helpdata/en/22/0424fe488911d189490000e829fbbd/frameset.htm
For Return table:
http://help.sap.com/saphelp_nw04/helpdata/en/21/894eeee0b911d4b2d90050da4c74dc/frameset.htm
Take in mind if you have a BI 7.0 you must use a trasformation end routine.
Regards,
Sergio -
SQL SERVER - OWB connectivity - Urgent
Hi,
I need help in setting up a DSN for sql server.
Oracle and OWB in Unix machine.
Sql server is in windows.
I need to create a DSN in unix which connects to sql server machine.
For this which ODBC (SQLSERVER ODBC or ORACLE ODBC) I need to install and the steps to create a DSN for SQL SERVER in UNIX machine.
Thanks in advance.
-- HarshaHi Harsha,
look this
Re: How to import the data in a .xls or .xlsx file into a oracle database table
Regards,
Oleg -
Hi all,
when we triger dbconnect job i want to know what are the steps and process happens in database while we connecting sql server through dbconnect
helpfull answer will be assigned points.
Regards
Ashwinhi ashwin
check this link
http://help.sap.com/saphelp_nw2004s/helpdata/en/58/54f9c1562d104c9465dabd816f3f24/content.htm
check the OSS notes also
http://help.sap.com/saphelp_nw2004s/helpdata/en/50/63d6b37bda7f4a92e2dec21b14ceee/content.htm
Assign points if helpful -
Automated ODBC Connection URGENT!!
Hi guys, how do i set up an ODBC data source for an sql server on a client machine using a batch file? (I do not want to go into the control panel and set it up manually). Makes my job very tedious..:-)
I have written a java application that used JDBC:ODBC connection to a sql server database and everytime i install it on a clients machine, i have to set up the datasource myself. Installing JRE and setting up the paths is already a headache so please help me ASAP.
Thanks,
-RaamLook at this thread:
http://forum.java.sun.com/thread.jsp?forum=48&thread=89806
I found this by typing "DSN-less" into the search box. - MOD -
Telnet connection---urgent pls
each time i try to telnet using my LAPTOP.I get command not recognised.can somebody help me out now.Other PC works except mine.This is very urgent pls.
Download Putty
Search on google " Putty ".... using putty telnet.
You can open Hyperterminal and choose TCP/IP option instead of COM1.
Click on OK
You will telnet into device.
Putty use is very good very secure.
Regards,
Dharmesh Purohit -
Mapbuilder Invalid Connection - Urgent
Hi,
I was running an app out of the mvdemo schema w/o a problem. I needed to move some of the tables to a different schema so I moved the maps, styles, themes, cached maps data along with the tables I needed to move. I inserted metadata into user_sdo_geom_metadata and created spatial indexes on the moved tables.
In MapBuilder, I can establish a connection to the mvdemo schema but am getting an invalid connection error on the new schema.
Any help is greatly appreciated as I am showing this application to a customer on Friday!
Thanks.Please post the error when trying to do the connection in MapBuilder.
If you have a chance, download MapViewer/MapBuilder 11g preview version that is on OTN and try the connection.
One question: your new user/password contain any upper case letters? With database 11g in some cases this information can be case sensitive. This may not apply to database 10.2 as I think this is a new feature of 11g. But knowing if you used upper case letters is an additional information for our investigation. -
We have a project in LAD to implement Endeca Information Discovery 3.1 with text enrichment (Siebel as structured data source and Twitter and Facebook as unstructured data sources).
We need to define the architecture for Dvmt, Test and production environments. So far we found the following presentation where we have recommendations
OEID v3.1 IT Deck - 2nd Meeting Presentation (see slide #38 - #43)
Can we use those slides as a guide / reference to define the architecture? Or is there any other documentation that we should take into account?
Regards,
MarianoHi,
>How do the files get copied to the different file systems in a clustered environment?
I believe the server node SDM connects to is categorized as the master node.
When it has deployed the application in the database and on its own server node, it through the message server triggers a cluster synchronization of the application.
So the files are sent through the message server (or directly between master node and the others as the message server allows this if there is a lot of data)
>How does it work if users are using the application that is being updated?
Good question. I believe the SAP system does the following:
1. Stop the application, throwing out all users and possibly removing any session data
2. Update the application (user will get error message that application is not available if trying to access)
3. Start the application (once up users will be able to access it)
To find out more, put on ALL logging in the log configurator services in visual admin for the location com.sap.engine.services.deploy (and possibly com.sap.engine.core.cluster)
>Should hot-deployments be done or should they be deployed when the system is quiet?
Depends on the business criticality of the application. I would normally recommend off-hours for the deployment, but as far as I knowSAP supports deployment during high load as well.
>Is any of this documented anywhere?
Not that I know of.
The information above is based on analysis of some cluster synchronization problems for WD for java application we had on earlier versions.
Cheers
Dagfinn -
Hi experts,
We are facing the serious issue about the OTM deployment thus looking for your help.
Currently, our customer central host OTM in China. Web/APP/DB servers are all locate at the same place.
The system response time on IE is very fast (< 5 secs) while the users are in China no matter using internet or customer's intranet.
While users is not in the China, it takes 20~30 secs even longer to connect the OTM.
After enable DEFLATE/EXPIRE mod on the Apache also try Oracle Web Cache.
The intranet user from Indonesia is fast (<5 secs), almost no difference to users in China.
The users in Germany feedback that the response time improved.
However, it still take 10 sec ~ 15 sec which is not acceptable.
Anybody has similar issue and any solution to fixed it?
ThanksHi,
>How do the files get copied to the different file systems in a clustered environment?
I believe the server node SDM connects to is categorized as the master node.
When it has deployed the application in the database and on its own server node, it through the message server triggers a cluster synchronization of the application.
So the files are sent through the message server (or directly between master node and the others as the message server allows this if there is a lot of data)
>How does it work if users are using the application that is being updated?
Good question. I believe the SAP system does the following:
1. Stop the application, throwing out all users and possibly removing any session data
2. Update the application (user will get error message that application is not available if trying to access)
3. Start the application (once up users will be able to access it)
To find out more, put on ALL logging in the log configurator services in visual admin for the location com.sap.engine.services.deploy (and possibly com.sap.engine.core.cluster)
>Should hot-deployments be done or should they be deployed when the system is quiet?
Depends on the business criticality of the application. I would normally recommend off-hours for the deployment, but as far as I knowSAP supports deployment during high load as well.
>Is any of this documented anywhere?
Not that I know of.
The information above is based on analysis of some cluster synchronization problems for WD for java application we had on earlier versions.
Cheers
Dagfinn -
Hi,
I have a client requesting information regarding WLI deployment ie. running
BPM in a clustered environment, messaging between different workflows on
different servers, performance tuning, best/worst practices etc.
Does anyone know of any documentation or resources that would provide
insights into this area?
Thanks.
SteveHi,
>How do the files get copied to the different file systems in a clustered environment?
I believe the server node SDM connects to is categorized as the master node.
When it has deployed the application in the database and on its own server node, it through the message server triggers a cluster synchronization of the application.
So the files are sent through the message server (or directly between master node and the others as the message server allows this if there is a lot of data)
>How does it work if users are using the application that is being updated?
Good question. I believe the SAP system does the following:
1. Stop the application, throwing out all users and possibly removing any session data
2. Update the application (user will get error message that application is not available if trying to access)
3. Start the application (once up users will be able to access it)
To find out more, put on ALL logging in the log configurator services in visual admin for the location com.sap.engine.services.deploy (and possibly com.sap.engine.core.cluster)
>Should hot-deployments be done or should they be deployed when the system is quiet?
Depends on the business criticality of the application. I would normally recommend off-hours for the deployment, but as far as I knowSAP supports deployment during high load as well.
>Is any of this documented anywhere?
Not that I know of.
The information above is based on analysis of some cluster synchronization problems for WD for java application we had on earlier versions.
Cheers
Dagfinn -
How during deployment my user id has been checked by J2EE engine
Hi,
If I want to transport my application, Do I need a valid user ID created in J2EE engine UME. If it is, How during deployment my user id has been checked by J2EE engine.
Thanx for your time.
Cheers,
SamHi,
to deploy your application to the J2EE engine you normaly use SDM (Software Deployment Manager). You need a password (no user Id) to deploy via SDM. This password was set up during installation of the Web AS. You can reset this password via SDM command line tool. Have a look at the SDM documentation for details.
SDM uses the deploy service of the J2EE engine to deploy the application. Therefore SDM connects to the J2EE engine via a username and password that are stored in the secure store (Configtool -> Secure Store). This user is normally identical with the administration user. If you change the password of the administrator you also have to change the password in the secure store. Oterwise you cannot deploy via SDM.
Regards Helmut -
Can we change initial Master password at the SAPinst after the installation
Hi Experts,
We are having a bit of trouble getting Solution Manager about initial Master password at the SAPinst.
I have done install the Solution Manager 7.0 SR3.
However, after installation we have to change the password when used at SAPinst for our company security problem.
Does anyone know how to change these users password and settings password?
- J2EE_ADMIN
- SAPJSF
- SLDDSUSER
- SLDAPIUSER
- ADSUSER
- ADS_AGENT
- smdadm
- Key Phrase for Secure Store
- SDM Connection password
Thanks!> Does anyone know how to change these users password and settings password?
>
> - J2EE_ADMIN
> - SAPJSF
> - SLDDSUSER
> - SLDAPIUSER
> - ADSUSER
> - ADS_AGENT
> - smdadm
> - Key Phrase for Secure Store
> - SDM Connection password
Since a Solution Manager is a double stack installation (ABAP + Java) and has the UME configured that the passwords in the ABAP are used you can change (most of) them in ABAP.
HOWEVER: Those passwords are used on different places and you would need to check the specific application section where they are used (WebDynpro connections, JCo etc.)
Markus
Maybe you are looking for
-
Converting PDF Portfolio in a single PDF in Acrobat Pro 10
I need help in converting a PDF Portfolio file into a single PDF This was simple to do in Acrobat Pro 9, but now i have upgrade to Pro 10 and this feature seems to have disappeared. Getting rid of this feature would be huge mistake on Adobe's part, s
-
Will an iPad work as a reader for a PDF formatted test book
The typical file I want to read is about 1000+ highly formatted pages and 400 MB. Simple requirments I have are: 1) Can I actaully see a page of text and read it. I tried this on a Kindle and was forced to zoom in and then horizontally scroll a w
-
Just a question about Linux certs. Is Linux+ a good one or is there a better one that is not a Red Hat cert. I am going to get my Linux+ but just seeing if there is a non-RH cert that is a good one to have also.
-
How to add create partition to an existing table?
hi, please tell me how to add partition to an existing table. i have tried alter table mvr add partition sno but getting error : ORA-14501: object is not partitioned thanks.
-
Dreamweaver CC and Bootstrap, Editor Slow
Hello. Attempting to edit files results in lag while typing. This lag sometimes exceeds 10 seconds. removing the bootstrap.min.css allows edits to work as would be expected. We combine PHP code, and simple functions like.. if( $a===true && $b ===tru