SE14 - mass check for Database objects

Dear Gurus
We have a lot of tables, that have error/problems in check DB14->Check->Database object
How can I find all problematic tables in single report?
Regards
Vladimir

you can use report RUTDBCHK. It does the se14 functionality. Maybe debugg some and you will find the corresponding FM related, which would in turn return an error / information about the status

Similar Messages

Duplicate check for Connection Objects in CRM

Hi,
I want to implement a duplicate check for connection objects in CRM. The duplicate check shall use the address of the connection object and perhaps additonal attributes. I have found a duplicate check for business partners using the basis address service and TREX as index pool. However, I couldn't find a similar functionality for connection objects. Does somebody know:
1) How to implement a duplicate check for connection objects which is based on the address of the connection object?
2) Is there a way to use the TREX-based duplicate check which is integrated into the basis address service for connection objects?
Thanks in advance!
Best regards,
Frank

I also have a requirement to check for duplicate address at connection object level and we are using SAP data servies to validate the address. Can anyone share their experience.

How to do the Unicode Check for Business Objects ?

Hi all,
How to do the Unicode Check for Business Objects ?
Note: All business Objects are stored in BOR (Business Objects Repositary)
Thanks in advance
Sri..

Hi..
i have used the UCCHECK transaction for some business Objects
For some business objects it is showing that No Unicode Errors found Ex: Z00MARA
and for Business Objects it showing the message like : There is no program corresponding to this selection.
Why system is showing like this ?
Thanks in advance
Sri..

How to turn off the authorization checks for a object in infoproviders?

Hi - how can I turn off the authorization check for an object (ex: 0orgunit) in infoproviders?
I have 0orgunit as an authorization-relevant object and is used in one of the cubes. When reports are run for this cube, this is causing authorization issues. The object is present in other cubes also but I have to remove or turn off the authorization check of this cube alone. How to do this? Please help.
Thanks,
Raj.

Hi Raj,
Srinivas, is right , however in BI7 the correct transaction is RSECADMIN and not RSADMIN.
In BW3.5, use RSSM transaction to do thins.
OR
Go to transaction RSECAUTH ---> Choose the authorization object that has been created for org unit(and has been assigned to the user). Go to change mode. Remove the cube from the dimension 0TCAIPROV
If you are using old authorization concept in 3.5 or in 7.0
Go to RSSM. In the checks for infoprovider, enter your infoprovider name. Choose change.Here you will see a checkbox to switch off the authorization.
Hope this helps you,
Best regards,
Sunmit.

Mass changing for accrual object assignments part of the field profit_ctr

Hi Experts,
Does any one know about mass changing for accrual object assignments part of the field profit_ctr (profit center).
How can we do this?
Best Regarts.

Hi,
I have equal problem. How did you save him?
Regards,Irena

JS to check for Anchored Object in a textFrame

Hi, any knows of JS to check for anchored objects in a textFrame.
Thank you.

if (myTextFrame.textFrames.length > 0)
// then there are anchors in myTextFrame
Peter

Support for database objects shall be installed

Hello,
my problem is the following:
Support for Repository (Core) Objects is installed,
but I want to install the support database objects, too.
Can you help me with that?
Thanks

Henrik,
I assume you mean the Designer model, as this provides a structured database model, along with many other elements. You are given the option to install the Designer model along with the Core model when you initially installed the repository using the Repository Administration Utility.
regards,
David

Check for Authorization object

Hi All,
I have a report which will authorize the person running the report.
I have been given a requirement which is to not accept some users and accept some users.
Now I know this is possible with authorization object but as I never worked with it so I exactly kind of getting in confusion as to how to go about it.
Could some one let me know how to go about it. I have few questions.
1. what is the exact use of authorization object.
2. I can build in the logic but what all should one start with before going for before implementing authorization object for the report.
3. I know there is some basis work involved in this but what is that ?
Thanks,
Mahen

Hi,
In general different users will be given different authorizations based on their role in the orgn.
We create ROLES and assign the Authorization and TCODES for that role, so only that user can have access to those T Codes.
USe SUIM and SU21 T codes for this.
Much of the data in an R/3 system has to be protected so that unauthorized users cannot access it. Therefore the appropriate authorization is required before a user can carry out certain actions in the system. When you log on to the R/3 system, the system checks in the user master record to see which transactions you are authorized to use. An authorization check is implemented for every sensitive transaction.
If you wish to protect a transaction that you have programmed yourself, then you must implement an authorization check.
This means you have to allocate an authorization object in the definition of the transaction.
For example:
program an AUTHORITY-CHECK.
AUTHORITY-CHECK OBJECT <authorization object>
ID <authority field 1> FIELD <field value 1>.
ID <authority field 2> FIELD <field value 2>.
ID <authority-field n> FIELD <field value n>.
The OBJECT parameter specifies the authorization object.
The ID parameter specifies an authorization field (in the authorization object).
The FIELD parameter specifies a value for the authorization field.
The authorization object and its fields have to be suitable for the transaction. In most cases you will be able to use the existing authorization objects to protect your data. But new developments may require that you define new authorization objects and fields.
http://help.sap.com/saphelp_nw04s/helpdata/en/52/67167f439b11d1896f0000e8322d00/content.htm
To ensure that a user has the appropriate authorizations when he or she performs an action, users are subject to authorization checks.
Authorization : An authorization enables you to perform a particular activity in the SAP System, based on a set of authorization object field values.
You program the authorization check using the ABAP statement AUTHORITY-CHECK.
AUTHORITY-CHECK OBJECT 'S_TRVL_BKS'
ID 'ACTVT' FIELD '02'
ID 'CUSTTYPE' FIELD 'B'.
IF SY-SUBRC <> 0.
MESSAGE E...
ENDIF.
'S_TRVL_BKS' is a auth. object
ID 'ACTVT' FIELD '02' in place 2 you can put 1,2, 3 for change create or display.
The AUTHORITY-CHECK checks whether a user has the appropriate authorization to execute a particular activity.
This Authorization concept is somewhat linked with BASIS people.
As a developer you may not have access to access to SU21 Transaction where you have to define, authorizations, Objects and for nthat object you assign fields and values. Another Tcode is PFCG where you can assign these authrization objects and TCodes for a profile and that profile in turn attached to a particular user.
Take the help of the basis Guy and create and use.
Reward points if useful
Regards
Anji

Checking for released objects.

I'm trying to release some objects, but the code crashes on the release, because I suspect the object has been released already. I tried to check for nil, but this doesn't seem to work
eg:
- (void)f1 {
object = [[Object alloc] init];
- (void)f2 {
[object release];
// object= nil; /* I shouldn't need to do this? */
- (void)f3 {
if (object) // sometimes this still points to a memory address, though the contents of the memory is a bit funny
[object release]; /* code crashes here sometimes because f2() was run
is there a better way to check if an object has been fully released?
BTW: this is all the on iPhone 2.1, so I know the memory management is a little diffferent.

Deallocation does nothing but mark that space as free for subsequent allocations. Uncomment the second line of f2.

Is there any best practice or standard for database object naming ?

Hi
Thank you for reading my post
is there any standard or best practice for databse objects naming ?
for example how should we name columns of a table ? should it be like TOTAL_VOTE or TOTALVOTE and many other items.
Thanks

what does oracle suggest as a naming schema for tables , fields , views. indexes , tablespaces , ... If you look at the data dictionary you will see that not even Oracle keeps rigidly to any specific standard, although there are tendencies :)
"The nice thing about standards is that there are so many of them to choose from."
-- Andrew Tannenbaum
Cheers, APC

Class diagram for database objects.

Hi,
I am creating a diagram from the tables in the database in Oracle Jdeveloper 10g. This will basically give me a ER diagram. When I drag and drop a table - say EMP - i get a window - "Create from database object" - which gives me a few options. I selected the "Offline database objects" option. The table appears in the class diagram sheet with the table name, it's columns and the constraints.
Now when I remove this object (table EMP) and then again try to drag and drop the same object as above, I get the object on the sheet as EMP1 and not EMP and also the constraints are renamed. It does not allow me to change the name to EMP. It gives a message that -"TABLE names must be unique" and the table name is renamed to EMP1.
I want the name as EMP only. How do i do it?
Thanks,
Vinay

Vinay,
It's because in the first step, you deleted the table from the diagram, but not from the offline database. Now, when you drag a table from the database connection, it will need to create a new offline table. Instead of dragging from the DB connection, drag it from the offline database (it should already be there from the first step). Alternatively, delete the offline table as well as part of your first step (deleting the object from the diagram).
John

Page height not changing and yes, I've checked for hidden objects

Hi
has anyone got any advice? I'm tearing my hair out!
I cant seem to change all my websites page heights despite checking that there are no hidden items
best wishes Helen

Hello,
Please go in the page in design mode. Select "Show all on Page" and "Unlock all on Page" from Object Menu.
You may find some unwanted elements near the footer of the page. Deleting them will fix the problem. If it do help then please share the muse file with us so that we can take a look at it.
Regards
Vivek

Su01 - authority check for the object s_user_grp

Dear Basis Gurus,
requirement:
Decentralisation of user administration. Local site admins should only be able to administrate users belonging to special user groups.
What I have done:
Generated a new role via pfcg for transaction su01 and object s_user_grp. Activity for s_user_grp = 02. Up to this point this works without any problems.
But trying to limit the role to a certain user group (s_user_grp => class), this doesn't have any effect for the local site admins. They are still able to change all user data, nevertheless if the users are member of another group or not (group membership via sugr).
Please advice.
thanks and regards..,
sven

Hi Lakshmi,
thanks! That solved my problem.
regards..,
sven

How to check for database updation?

Hi All,
I have a JTable in my Porgram.Wherein JTable displays all the records from a particular table.As and when the database is getting new records ,I want my JTable also to be updated .How can i do that?
can i use a Timer?
Thanks,
Aarthy

Not sure if this works, but I think it should:
Create a timer
public static final int INTERVAL = somevalue;
timer = new Timer(INTERVAL, new ActionListener() {
               public void actionPerformed(ActionEvent evt) {
if (done) {
timer.stop();
model.setDataVector(....,....);
suppose the method you are running is call theMethod(), then:
     class ActualTask {
          ActualTask() {
     theMethod();
done = true;
     public void go() {    //download the swingworker class from http://java.sun.com/docs/books/tutorial/uiswing/misc/threads.html
          final SwingWorker worker = new SwingWorker() {
               public Object construct() {
                    done = false;
timer.start();
                    return new ActualTask();
          worker.start();
So, this is running the timer on a thread. You can do other stuff at the same time.

Error performing existence check for database

I am new to oracle . I installed oracle 10. As basic installation. When I tried to generate new database from node I got error. Error log file shows
*** traceback - mtidbLogin : (-19)
*** traceback - baseExecuteStandalone : (-19)
*** traceback - baseExecuteFile : (-19)
*** traceback - msqlExecuteFile : (-19)
How to handele this error.
Sanaru

Sanaru,
so far you didn't respond to any of the questions asked. 'An application' again doesn't tell anything.
To create a database in Oracle you would need to use the 'Database Creation Assistant' or sql*plus.
As you seem to think Oracle is SQLserver sold by a different vendor, you use your own application, which creates a SQLserver database, to create an Oracle database. This is not going to work ever. A database in SQLserver is a schema in Oracle.
Also creating an Oracle database in an installation program is a very bad idea.
No professional Oracle DBA will allow this.
It can be done, but you would need to run Database Creation Assistant in silent mode.
Sybrand Bakker
Senior Oracle DBA

SE14 - mass check for Database objects

Similar Messages

Maybe you are looking for