SE16 on WDA

I am trying to create a SE16 Application on WDA.
Now everything looks fine .But after entering Table name I am getting following error message.
Note
The following error text was processed in the system DEV : Could not find attribute LOW
The error occurred on the application server KBCSAPD_DEV_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_WD_CONTEXT_NODE_INFO~GET_ATTRIBUTE of program CL_WDR_CONTEXT_NODE_INFO======CP
Method: IF_WD_CONTEXT_NODE_INFO~FOLLOW_PATH of program CL_WDR_CONTEXT_NODE_INFO======CP
Method: IF_WD_CONTEXT_NODE_INFO~FOLLOW_PATH of program CL_WDR_CONTEXT_NODE_INFO======CP
Method: GET__ATTRIBUTE_INFO of program CL_WDR_VIEW_ELEMENT===========CP
Method: GET__DDIC_ATTRIBUTE of program CL_WDR_VIEW_ELEMENT===========CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L0STANDARD==============CP
Please help me with this.
Thanks,
Urjit

Yash,
Thanks for your efforts.
I have already checked ST22. ST22 is not helpful. Everytime program is creating Short Dump. But same description.
Dump is as shown below
What happened?
    The exception 'CX_WD_CONTEXT' was raised, but it was not caught anywhere along
    the call hierarchy.
    Since exceptions represent error situations and this error was not
    adequately responded to, the running ABAP program
     'CL_WDR_CONTEXT_NODE_INFO======CP' has to be
    terminated.
What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
    An exception occurred which is explained in detail below.
    The exception, which is assigned to class 'CX_WD_CONTEXT', was not caught and
    therefore caused a runtime error.
    The reason for the exception is:
    Could not find attribute LOW
How to correct the error
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "UNCAUGHT_EXCEPTION" "CX_WD_CONTEXT"
    "CL_WDR_CONTEXT_NODE_INFO======CP" or "CL_WDR_CONTEXT_NODE_INFO======CM002"
    "IF_WD_CONTEXT_NODE_INFO~GET_ATTRIBUTE"
Also I am not using this parameter LOW anywhere in my Code. I dont know where this parameter is used.
If anyone has created this Application then please respond me .
Thanks,
Urjit
Edited by: Urjit Jethwa on Apr 9, 2008 8:59 AM

Similar Messages

Why in SE16 we can not see New Data Table for standard DSO

Hi,
We says that there is three tables (New Data Table, Active Data Table and Change Log Table) of Standard DSO, Then Why in SE16 we can not see New Data Table of Standard DSO.
Regards,
Sushant

Hi Sushant,
It is possible to see the 3 DSO tables data in through SE16. May be you do not have authorization to see data through SE16.
Sankar Kumar

Display Request Form is not triggering in Standard SAP WDA : FITE_REQUEST

Hi Guru's,
In our Travel Scenario in NWBC, Once the employee finish the Travel Request he is unable to take print out by clicking on Display Request Form. Nothing is happening when we click on "Display Request Form".
The Form I am using is FITP_REQUEST_FORM. It is displaying perfectly when I execute via SFP. The problem I am facing is nothing is happening when I click on "Display Request Button" in WDA
Application:
FITE_REQUEST
Application Component:
FI-TV
Component:
FITE_VC_REVIEW
Window:
VC_WINDOW
View:
REVIEW_VIEW
Application Component:
FI-TV
Give me some lights to solve this issue
Thanks,
Namsheed.

Hi Samuli,
Issue is solved. It was Program Error from SAP side.
Now All the buttons are working fine and I am able to print PDF also.
Solution is implement the note 2031585 - SAP NWBC ABAP Runtime Patch 40.
System Details : ECC 6.0 NetWeiver 7.4 ,
EHP 7 , SP-Level 06
Thanks a lot for all your suggestions.
Regards,
Namsheed.

Getting values from a function module called in a WDA method

Friends,
I am trying to execute a function module from WDA.
I have created a service call for the function module. The function module takes values from the user, looks up the corresponding values of another field and returns the values in an internal table.
I am using the "Method Call in Used Controller" of WD Code wizard to call the function module.
When the event handler method containing the call to the function module is executed, nothing happens.
I am not sure how to pass values to the function module and to get the return values from the function module.
I am new to using function modules from WDA. Please help me out.
Thanks and Regards.

Rashmi,
Is the function module intended to collect input data from the UI and process it? - Yes
If yes, then the input (importing parameter) to the Function Module is a table of values (which should be ideally from the context mapped to the Table UI Element). - The importing parameter is a single value NOT a table and is mapped to the view context.
Now this table UI Element is bound to the view controller context , which in turn is mapped to the component controller context. And you are indeed being able to read the value of this internal table in the component controller method where the function module is being called by means of get_static_attributes_table (Is this right? - Yes, I am able to read the table of values that is passed from the component controller view to form view context by using get_static_attributes_table.
Or are you being able to read it in the event handler method of the view controller and not being able to read it in the component controller method) -
The function module takes a single value as import parameter and returns a table of values as return value.
It works fine when no importing parameter is being used and returns the table of values that is getting passed from component controller context to form view context when i am able to read it using get_static_attributes_table.
Now the question is: how to pass the import parameter value to the function module. I assumed since the importing parameter is a context node (like the return values are), i should set the value ( captured when the user enters the value in the form) to the importing parameter context attribute using set_attribute method. Since it is mapped to the component controller context, i assumed it will get passed and the method will take it as input parameter.
Let me know if my assumptions are correct regarding passing the import parameters and what is missing here.
Thanks and Regards.

Question on png's, gif's, and jpg's as imageSources in WDJ and WDA

If you go to MIMEs in SE80, you will find that the WDA imageSources for the WDA version of the WDJ/NWDS Quiz tutorial are a mixed-bag: gif's, png's, and I think one jpg.
In NWDS/WDJ, on the other hand, the Quiz tutorial (#2) calls for all images to be jpg's.
If I download the gif's and png's using the download function in SE80, can I declare the imageSources in NWDS/WDJ using these two suffixes as well as the jpg suffix?
Or does NWDS/WDJ require all imageSources to be jpg's ???

You can use any of the mentioned images types in WD Java.
Armin

Is it possible to validate the deletion of data in custom SE16

Hi Guys,
To maintain a Z table ZCITY (Master Data), I created custom SE16 t-code ZSE16CITY (using SE93 - Transaction with parameters).
Is it possible to validate the deletion of data from ZCITY Table in custom SE16.
If ZCODE exists in any of the transaction table then deletion of the record is not allowed and display the message for user.
Is this functionality is doable in custom SE16 or I have to create a maintenance program using Dialog screen (SE51).
Thanks for you input.
mini

Hi ,
try this way....
using SE93 - Transaction with parameters
next pass the below values in the Name of the screen field and Value
VIEWNAME <table name>
DATABROWSE-TABLENAME <table name>
Prabhudas

Portal Events---WDA view is empty on initialization

Hello everyone,
I created a WDA application which will be integrated with Employee Search Iview (provided by SAP). Everything is working fine...only issue is that when we display the page first time...my WDA view is empty...untill we click on an employee....I want to get the first employee from the list and display his/her info in my WDA view as soon as we open up the page.
I cannot seem to find any info on which event this Employee search iview triggers in the initialization and what parameters this event passes on. Is there any documentation on this? I mean list of event trigger by this employee search iview and event names?
Once again...when we click on an employee from the list....we are populating the data in WDA view...no problem there....we just want to show data when we first come to the page....same as SAP does for its Employee search iview and general data iview....these iviews are from SAP...and when we put them together...general data iview fetchs the data for the first employee in the list....on initialization....but our WDA view stays empty....
Thanks...
J.

Hi J,
when we click on an employee from the list....we are populating the data in WDA view...no problem there....we just want to show data when we first come to the page.
conceptually you need to place method in WDDOINIT of default view in your WD4A application and try to read the first element of the employee list. This would be little different than reading the employee data from event, may be you can have some method in the ASSISTANCE class that attached to your WD Application that can read employee, data as soon as there is one available .
Greetings
Prashant

CALL a report from WDA using SUBMIT to sap-spool

Hi,
I need to call a report from one of the methods of a WDA application.
The out of this report is a sapscript. I want show it in WDA (PDF).
The report is called when a user clicks EXECUTE button.
The piece of the code is:
call function 'GET_PRINT_PARAMETERS'
    exporting
      immediately            = 'X'
      new_list_id            = 'X'
      no_dialog              = 'X'
      receiver               = sy-uname
      release                = 'X'
      sap_cover_page         = 'X'
    importing
      out_archive_parameters = t_arcpar
      out_parameters         = t_pripar
      valid                  = i_valid
    exceptions
      archive_info_not_found = 1
      invalid_print_params   = 2
      invalid_archive_params = 3
      others                 = 4.
      submit hbrcced0
                      with pnppernr-low eq i_pernr
                      with pnpbukrs-low eq t_p0001-bukrs
                      with pnpbegda     eq i_begda
                      with pnpendda     eq i_endda
                      with p_expot      eq ''
                      with ano          eq v_gjahr
                      with respcc       eq v_sachn
                     to sap-spool
                     spool   parameters t_pripar
                     archive parameters t_arcpar
                     without spool dynpro
                     and return.
    if sy-calld eq ''.
      message 'err' type 'E'.
    else.
If i execute this code in WDA, the sy-calld never is equal 'X'.
But if i execute it in program (SE38) the sy-calld is 'X'.
How i can call the program 'hbrcced0' in WDA ?
Cheers,
Silvio Galery

Hi Silvio,
a submit REPORT to spool does work from WDA.
ONLY when "and return" is used.
You have that, so it should work.
Note you had print immediate on, so it will be output on printer,
and not available to read after the call.
(which option was the keep after print?, I would have to check docu)
The sy-calld will be set to X inside the REPORT when it is running.
After the submit has run back inside WDA it is of course reset to space again.
Cheers
Phil.

How can I hide a field a table from SE16

Hi all,
I have an urgent requirement, can anyone help me? How can I hide or mask any field of a table from SE16. Also how can I restrict the user not to put a restriction on a particular field of a table so that this field should not be accessed for SQVI/SQ01.
Awaiting for reply.
Useful answers will be rewarded immediately with full points.
Tnx.

You could hide the column, by using the standard functinoality of the ALV output, you would need to hide the column, and save a default layout. This way the next time you come into this display, the column will not be there.
Regards,
Rich Heilman

Issues in exporting data from SAP tables in SE16 to excel

1.How can I save an sap table (displayed through SE16) in ECC6 into a pivot table in excel. [ I have seen this option in R/3 4.7, but do not see it in ECC.]
2.How can I copy all the rows of a 3000 row SAP table in SE16 and paste the values into excel. I need to do this in one shot and not page by page.
3.What option do I need to select inorder to preserve the formating of the values while saving as a local file in a spreadsheet format. All the values with leading zeros,like company codes gets saved with only their numeric portion when I save a SAP table as a local file. for eg company code 0001 gets saved in excel as just 1,company code 0056 gets saved as 56 etc. How do I prevent this? What option do I need to set in SAP in order for the values to be downloaded as is, without any truncation of leading zeros.

1. I don't know. How about creating a pivot after exporting data
2. System->List->Save->local file->clipboard
Then paste whole lot in Excel
3. This is a problem with Excel, not SAP. SAP exports with leading zeroes.
You could export as flat file & import into Excel into a spreadsheet with an appropriate numbering format.

How Can I deploy a .WDA file into MSS

Hi Everybody,
We have a problem with leave issue and SAP has provided a new EAR file i.e. sap.commssato.ear.
They said that we need to take a back up of existing mss~ato before we deploy this new .EAR file. But when we checked in the portal server, we can see only a .WDA file, but not an .EAR file. Now, i don't know how to deploy a .wda file using SDM. If some thing goes wrong with the new file(.ear file supplied by SAP), we have to re deploy the old file. I learnt that we can only deploy EAR, SCA and SDA file files to the server using SDM. Please explain me what should i do now.
Thank so much in Advance.
Kind Regards,
Rao

Hello Nagarjuna,
Can you provide more inputs on this? Have you been able to solve it?
If so, please contribute with the solution for the community.
Regards,
Bentow.

To get selected cell info in table for WDA.

i'm developping in netweaver2004s.
a view has a table and a button.
another view has input fields.
i want to get cell info(selected field name not value)
so i use that info in another view.
i want to know same command 'GET CURSOR' in WDA.
please let me know that method.

Hi,
You can specify the importing parameter ID as type string in the action handler of the button. It will contain the ID of the button.
Best regards,
Thomas

Open iview url in WDA main view (below some long text)

Hi Experts,
My WDA first page is divided into 2 parts top & bottom.
The top will have some text and bottom will have a display areas to display the portal iview. (Display means open iview directly on opening the first page of the application without any action)
Eg: when you open the WDA in IE it will display some text in top & google webiste opened below that long text.
I tried putting the google url in iframe source in main view but it didnt displayed it. only a blank area came displayed which was of iframe size.
Hope i explained my requirement.
Regards,
Nik

Hi Nikhil,
Your requirement is clear, but displaying google page where did you write the code.
Write your code in the View or component controller->WDINIT method, then first this method will display without any action.
In the Layout you can divide into two parts one is for text another one is for the google site display.
Let me know if you are not able to fix the issue still...send me the code I will let you know where is an issue.
Regards,
Naresh.

Unable to create a 'Z' for se16 transaction

Hi everyone,
we have a requirement where we are unable to create a Z for transaction SE16.
I went to se93 and checked it was a function pool so i went to SE80 to make a copy of standard function group SETB to ZSETB.
it made a copy of it anf I copied all the FM's and made a Z of those.
Once it is done. When I activate it it give a lot of errors , I have checked it and made sure that it is copying entire Function Group but all are fine.
My system is ECC6.0, earlier we had ZE16 which is a replica of SE16 and this had a lot of problem like ending in dumps , so we thought we would make a new Z transaction for SE16, but we get many error.
Please try it out once in ur system before U suggest me a change to be made.
Regards,
Raj

It is always best to minimize such issues by making a copy of programs or function modules where changes are needed to add new functionality. Also this would ensure any patches/notes added in future would have minimum impact on your clones.
-Cheers

Doubt in wda

Hi Experts,
How to get the current clicked row value from a table in WDA when my lead selection is selected on
another row.

Hi,
use the following code,
data: l_node type ref to if_wd_context_node.
data: l_elem type ref to if_wd_context_element.
data: l_index type i.
l_node = wd_context->get_child_node( 'NODENAME' ).
i = l_node->get_lead_selection_index( ).
l_elem = l_node->get_lead_selection( ).
l_elem->get_static_attributes( importing static_attributes = ls_stru ). " contents of the selected row
Kindly ask WDA related Qs in Webdynpro ABAP forum
Radhika.

SE16 on WDA

Similar Messages

Maybe you are looking for