Search by revision number

Hi All,
I need to search on the basis of revision number that is assigned for each document that is checked in the content server.By default we can see Author,Content ID,Title,Type,Security Group and Account fields in Metadadata Search. How to add Revision field over there so that i can search on the basis of revision number?
Your any pointer will be highly appreciated.
regards,
Shruti

Go to: Admin Server -> General Configuration
Then you'll see the following:
QuickSearchFields=dDocName|dDocTitle|dDocFullText|xComments
Just add *|dID* and you can now search by the revision number
cheers,

Similar Messages

  • ISupport :- search by Task Number

    Hello All,
    I have a requirement of implementing search service requests based on task number in iSupport Home page Quick Find bin. We are currently on Release 12.1.1. I could find some metalink notes on how to disable entries in Quick Find but unable to get any information anywhere on how to include SR search by task number.
    Would appreciate if any one of you have implemented any new custom search on iSupport Home page Quick find bar/bin....
    Thanks
    Radha

    Go to: Admin Server -> General Configuration
    Then you'll see the following:
    QuickSearchFields=dDocName|dDocTitle|dDocFullText|xComments
    Just add *|dID* and you can now search by the revision number
    cheers,

  • How to find revision number on my macbook ?

    How to find revision number on my macbook ?

    Wrong question, as there has been no formal revision number issued by Apple. What you may have seen on some postings about revision C, D, etc. is probably no more than rumor.
    You can get some information about the place and date of production of your computer by selecting the "Blue Apple" in your menu bar, then selecting About this Mac. Press More, then look at your serial number.
    My serial number is W8612xxxxx..
    "W8" lists the production location in China.
    "612" means that my MBP was produced in the 12th week of 2006.
    One of the defects in early production runs was a noisy inverter for the LCD screen. It's likely that that was a parts problem that was remedied in progress of production. My "week 12" MBP has no problems at all.
    My MBP runs a bit hot, but within specs. For that matter, I found the TiBook it replaced was uncomfortably warm as a laptop. There's a simple remedy if you want work in laptop mode. Just put something -- a notebook, a rigid plastic sheet a few millimeters thick or the like -- under the MBP and you (and the computer) will be more comfortable.

  • My Product descriptio​n doesn't match (searching by Product number on Lenovo site)

    Hi,
    I bought Thinkpad X200s on eBay - new, not used. I received it sealed with tape, not opened, hw configuration was exactly as was described/ordered. The numbers on the box are the same as on the notebook.
    But when I go on Lenovo site, and check it by product number, I got different result.
    My real HW configuration (only what differs):
    HDD: 128 GB SSD, 6 cell battery, don't have UltraBase.
    (the rest is ok)
    This is what I got from Lenovo site, searching by Product number (7466-3GU):
    Product: ThinkPad X200s 7466-3GU
    Original description: SL9400(1.86GHz), 4GB RAM, 160GB 7200rpm HD, 12.1in 1440x900 LCD, Intel 4500MHD, Intel 802.11agn wireless, Bluetooth, Modem, 1Gb Ethernet, Secure chip, X200 UltraBase+CDRW/DVDRW, Fingerprint reader, Intel Turbo Memory, 9c Li-Ion, WinVista Business 32
    When I called on Lenovo support, they told me, it's strange, and that shouldn't happen. I asked them, to check it, if they will get the same result. And they sent me the same product description, as on the Lenovo site. So HDD, battery, and UltraBay differs.
    Now I'm affraid, what if I'll have any problem, if they will accept it, or they will tell me, it's not cowered by warranty, because there are not original parts.
    Is this a problem? What should I do now?
    Thank you for your suggestions.
    Karol
    P.S.: I apologise for double post, I posted this question already on http://forum.notebookreview.com, but no reply. Then I realised, this is more appropriate forum for this question.

    I bought Thinkpad X200s on eBay - new, not used. I received it sealed with tape, not opened, hw configuration was exactly as was described/ordered. The numbers on the box are the same as on the notebook.
    But when I go on Lenovo site, and check it by product number, I got different result.
    My real HW configuration (only what differs):
    HDD: 128 GB SSD, 6 cell battery, don't have UltraBase.
    (the rest is ok)
    Now I'm affraid, what if I'll have any problem, if they will accept it, or they will tell me, it's not cowered by warranty, because there are not original parts.
    Welcome to the forum!
    Warranty (if there is one) shouldn't be an issue as the HDD and battery are customer replaceable units (CRU) and the UltraBase isn't required.  But...  Did you get cheated by the seller?  Have you checked to see if it is truly a new unit with the full warranty and not a refurb?
    Message Edited by JaneL on 05-28-2009 07:53 AM
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Jane
    2015 X1 Carbon, ThinkPad Slate, T410s, X301, X200 Tablet, T60p, HP TouchPad, iPad Air 2, iPhone 5S, IdeaTab A2107A, Yoga Tablet, Yoga 3 Pro
    I am not a Lenovo Employee.
    I AM one of those crazy ThinkPad zealots!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

  • Displaying "Revision Number" in a report

    We use Crystal's revision number as a means to help us track a problem one of our clients may be having with a report we have provided them for use by our application.  Revision number is found in the Crystal file document summary File > Summary Info > Statistics tab.
    Is there any method to have a Crystal report display this field.  We are using Crystal-10 and Crystal-XI.
    Thanks in advance for any help you might provide.
    Frank

    Not what you want,  but I just add a text box, and put the revision number in it.
    Now, you could use some of the "Special Fields", like file path and name, modification date, modification time.
    and just add them to the report  ( At least these are automatic )
    File summary info, can also be used, ( but this is a manual update, if you need to change it )
    Comments and Titles can be pulled from this location, using a formula like this.
    ReportTitle &" "& ReportComments

  • Revision number in sales order and scheduling agreement

    I want revision number in sales order as well as scheduling agreement. for this where we configure or 
    how will it come in VA01 as well as VA31.
    Regards

    Hi Amit,
    Its not hard to find this info at help.sap.com
    Sales Order
    Definition: Request from a customer to a company to deliver a defined quantity of products or provide a service at a certain time. The sales area that accepts the inquiry is responsible for completing the agreement.
    Scheduling Agreements
    Purpose
    A customer scheduling agreement is an outline agreement with the customer containing delivery quantities and dates. These are then entered as schedule lines in a delivery schedule. You can either create schedule lines when you create the scheduling agreement or you can create them later.
    You fulfill a scheduling agreement by creating the deliveries in the schedule as they become due. You process deliveries for a scheduling agreement in exactly the same way as you process a normal delivery. After you have carried out the delivery, the system updates the Delivered quantity field in the scheduling agreement item with the delivery quantity. The following graphic shows the document flow for scheduling agreements.
    Integration
    You would use this component if you had outline agreements with the customer that contained future delivery quantities of materials that would be sent at certain times within a fixed time period.
    If you work with scheduling agreements for the component supplier industry you also need to choose the "Electronic Data Interchange" (EDI) component.

  • Searching for the number in the bigint value...

    HI!
    Could anybody help me with the searching for the number in the bigint value. ex:
    9567423742840 i need to get only the 2nd and 3rd number (56) from this value...
     ^^
    and the same thing with symbols in the strings..
    is there any special function in jsp available for that?
    thanks

    try looking into the String class. There should be a substring or similar function that lets u get only a part of another string. You can convert the int into a string by doing something like new Integer(yourIntValue).toString() and then using that string for your substring function. There may be other ways to do it too, but this is the one I remember off the top of my head.
    Hope it helps
    package com.DJ_Java;

  • Search MAT0M - Material Number/Material Description does not  work

    Dear Guru,
    I don't know why search help in MM60 F4 at material field.
    Use search help: Material Number/Material Description
    It does not work when I selected material number because of it did not return material number to field.
    How should I do? Please help.
    Regards
    Thank you very much.

    go SE11
    display search help  MAT0M
    Check whether you have an flag for import and export  next to the MATNR field.
    if that is okay, then open search help MAT1
    select there search help MAT1_A then click  the big button for parameter allocation, check if related parameter MATNR is to collective search help parameter MATNR.
    if that is okay, then close the window, and doubleclick MAT1_A
    MAT1_A ha sagain included search helps.
    Select there your MAT0M and click the the big button for parameter allocation and  check there the same as above.
    Further check whether all search helps, MAT1 and MAT1_A and MAT0M ar active. (you can see that next to the description)

  • I have bought photoshop elemnts 12 and have a CD, but there where no serialnumber in the box or on the folder. What shall I do to activate. Have tried to search a support number in Sweden but i can´t find any.

    I have bought photoshop elemnts 12 and have a CD, but there where no serialnumber in the box or on the folder. What shall I do to activate. Have tried to search a support number in Sweden but i can´t find any.

    Find your serial number quickly
    Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

  • Use of revision number to segregate shutdown maintenance

    Hi,
    Please guide me the functionality of revision number with transaction code..like while creating order how can we assign revision number to maintenance order, as we are not using different order type for shutdown.
    Thanks
    DM

    hi
    it is entirely depend on your requirement ,if your industry will have shutdown for 3 months every year.
    then create revision number say 1 for this year and create 2 for next year.
    then while creating maintenance order in header tab page you can select the revision number in the Revision field,system will reschedule to the date specified in the system
    regards
    thyagarajan

  • Revision number for Header material in Production order.

    I have maintained Revision number in material mster  for Header material in Production order and also for components.
    1)Revision number for Header material in Production order is not appearing in AFKO table against production order.
    2)Revision number for components in Production order is not appearing in RESB table against reservation.
    Any settings for that please guide.

    Hi,
    Revision number generation is using ECM only possible. Are you using the ECM with revision levels. Check this.
    Regards,
    V. Suresh

  • PO Revision Number mismatch between two systems

    Hello ,
    We are using the PRISM product integrated with OCI to Oracle Financials. Most of the POs gets generated from PRISM and flows thru OCI to the Oracle Purchasing module. We have a customization developed on the Oracle Purchasing side, which allows to update the PO ( Using the Oracle standard CANCEL API) on certain conditions. All such POs which have been updated in the Oracle Purchasing side are in out of SYNC with the PRISM POs. The Setup option "Archive On" was set to "Approval" and will be increasing the revision number and archives the versions to the standard Archive tables. Thus a document with 2 shipment lines (Revision 0) after the above said modifications will become revision 2 and PRISM still looks for Revision 0.
    Is there a quick way to deal with this situation, to maintain the archival history and to make both the products in SYNC. Increasing the PRISM version number to match with the Oracle POs version number is ruled out as it is more cumbersome.
    Can we manipulate the revision_num fields in PO main tables and in the PO Archive tables? What adverse affects we have if we change these versions ? Kindly advice.
    Thanks & Regards,
    Kiran Kesari

    How long has the primary farm been running? My first thought is you may have some orphaned (old) profiles from users who no longer have accounts and maybe haven't been completed cleaned up.
    Another thought: Are you syncing the same OUs in both farms?
    Do you have multiple authentication stores (Active Directory and a custom FBA provider for example)?
    Jason Warren
    @jaspnwarren
    jasonwarren.ca
    habaneroconsulting.com/Insights

  • Where is material revision number stored?

    In what table is the material revision number stored (in Engineering Change Management)?  I need to pull a list of all materials and their most recent revision number.
    Thanks!

    CHECK
    MARA & AENR tables..

  • "Hardcoding ini-File Settings" or "Automatic Revision Number with tortoise"

    Hi all,
    we use a SVN Repository with tortoise here at our company for version control.
    I'd like to get the revision number hardcoded into the Application (.exe version).
    I've allready found out, that there is some tool which can scan a directory and replaces a constant string in a file with the current revision number.
    (So I could automatically generate a .ini file with "Ver=...RevNr" as content)
    But I have no clue, how I can hardcode a file into the application with the labview builder.
    (I think of something like the .ico file, which is hardcoded into the application too)
    Has someone a sollution for this?
    thanks
    Mario Hirth
    Solved!
    Go to Solution.

    Hi Mario,
    I want to
    ensure you mean what I think by "get a revision number hard coded in an Application"
    When we build
    an executable we
    display a revision number on the front panel of our application and
    we also have a Help -> About menu that displays the revision number
    and other info like build
    date and time.
    If this is the sort of thing you want read on for some suggestions.
    I have a software release VI
    which contains control for things like build data, revision
    number etc. This
    Vi is shown from the help ->
    about menu and
    by an indicator on the
    front panel of
    our main application.
    Manual revision control
    Before every build
    you edit this
    Software Release VI
    putting in the
    details you want
    in the controls, set these to be the default values and save the VI. When you build the new
    values will then
    be displayed in
    your executable application.
    This method is
    simple to implement
    and test; it is a good way to start. You just treat this VI as any other from the
    point of view
    of your source
    control system.
    However this method
    has problems (people
    forgetting to do
    the change before
    the build, people not knowing the next
    number etc) and very
    soon you will
    want to move to an automatic revision control system.
     I use and strongly
    recommend the OpenG builder
    rather than the
    NI builder, for
    a number of reason.
    1) Good API,
    to help you script you builds automatically
    2) Good hooks
    for pre-build, post-build
    and call-backs VI
    integration. For example
    automatically zip up
    your application after
    a build an email to somebody.
    3) A built
    in revision system
    you should be
    able to get up and running without much trouble
    4) The Build
    configuration files are
    in a human readable format.
    In our system
    which using ClearCase
    and not SVN but the same principle applies, this
    is a simplified
    description.
     I have three
    basic files that
    are used to auto revision, an ini file
    that holds a record of all build for example - 001 29-Nov-2008, the software release
    VI mentioned above
    and I use the OpenG builder revision file to allow an easy built in hook in the OpenG builder.
    When a build
    starts a pre-build
    trigger runs a
    VI to look in the ini file to see what the next build number should
    be, it then adds in a new entry with this new build number and various other information we
    store, the .ini
    file is then saved. In our ClearCase system I used a special config specification to
    ensure that EVERYONE
    sees the same
    version of the
    ini file (the
    latest) and after
    it is checked
    in the latest
    is immediately updated
    with this new
    save version again
    so that EVERYBODY
    can see it.
    The pre-trigger VI then opens in edit mode the software release
    VI in edit mode and plugs into the various control and indicator
    the values read
    out from the ini. The version of the software release VI is then saved and closed and then the build start. I do not worry about keeping
    these edited versions
    of the Software
    Release VI in
    the config control
    system, in fact
    I throw them away after the build is finished, they are in effect only templates
    it is the ini file that
    counts.
     Hope this helps
    as a simple guide
    cheers  
    Dannyt
    Danny Thomson CLAD
    Sub10 Systems Ltd

  • PO Revision Number in ECC6

    Is there a revision number maintained for Purchase Document in SAP ECC 6 version?
    As in 4.6C version there is no PO revision number maintained.

    The revisions are created in Purchasing whenever any Supplier facing attributes get changed. So if the Release has been aprroved it would have been communicated to the Supplier and now if you make any change the Release would go into Requires-ReApproval State and the revision number would be bumped.
    One more scenario which you might want to check is that modify the BPA against which this release is created and approve the BPA again. And see if the Release gets affected.

Maybe you are looking for