Search emailids by alias or partial names

Any ideas on using javamail API to get valid emailids based on alias names?
I have a list of " last name, first name" I can simply do a ctrl+k, outlook address book will let me know if there is a valid email or not. since my list is really huge, i cant go manual.
any pointers is greatly appreciated

JavaMail doesn't have any support for "address books". You're on
your own for this.

Similar Messages

How search a folder using a partial name

Hi all........ I'm VERY confused.
Probably I' the last who writes this question but......
I have a customer: in a folder on the server ( Leopard version) it stores MANY folders; these folders are called with the name of one of it's customers and a code that is connected to a specific job.
For example one folder is called 134927-WineBar shop
Another is called 134935-Marina Shoes shop
In Tiger, with the folder containing all this folders open, was so simple to find a specific item: just type a part of the code and that's it!
In Leopard I cannot do the same action: I cannot say, to my search, to point in the folder I'm working on it and easily find the name of a folder.
Any suggestion?
Regards

you should be able to do it in leopard too.
in your example enter "WineBar" in the search window. it will start a search with default location "this mac". change "this mac" to "Shared" or the name of the folder you are in on the server and it should find 134927-WineBar shop on the server. works for me.
Message was edited by: V.K.

Client unable to search partial names after internal web F5 VIP placed

I am running a dual pool set up, all 2013 EE on 2012 R2.
So, the other day I finally got access to a hardware load balancing solution. Not wanting a full conversion and to keep SIP flowing through DNS, I opted for balancing the internal web services. There is a separate administrator that handles F5;
thus, I am F5 knowledge deficient.
After having the VIP set up, I placed it's FQDN in the Override FQDN field within the Lync Topology Builder, published the topology and re-ran set up on each server. Keep in mind, that for some reason the builder already had the Lync pool FQDN in the
External Web Services FQDN.
Having enabled this new logical route for Lync web services, I have run into a problem, users are unable to search partial names but inputting a full SIP address yields the result. All clients are forced to do Web Search Only and the GALInitialDownloadDelay
across the board is 0. HLB is set to allow 80, 8080, 443, and 4443. I know that 8080 and 4443 are for external VIPs but it's better to ask for more and need less than ask for less and need more.
I have a few areas I think I goofed on but I am not able to change "willy nilly."
-Do I need to reissue the server certificates to include the FQDN of the VIP that points to the F5? I was noticing a certificate error on my web checks after the change.
-Do I need to reroute the exchange connection, somehow, to point to the VIP instead of the pool address?
-Do I need to remove my internal pool name from the External Web Services FQDN, or is that normal? Ideally I believe I would just point EWSFQDN to my Reverse Proxy internal interface VIP, that would be set up soon-ish.
Clarification, links to articles, or personal experience is appreciated. I've read through most (if not all Schertz's articles), technet (maybe sentence I missed), the F5 documentation, and NextHop.
TL;DR - When I put an F5 VIP FQDN into the Internal Web Services FQDN, Lync clients can't search and websites receive certificate errors. I believe it is certificate related but am unsure.
Thank you.

If you changed the internal override address from the poolname.domain.com to internalweb.doamin.com (just an example) you would need to ensure that your certificate that is used on your front-end servers includes internalweb.domain.com. As you noted, you
will see a certificate error. For address book services, it all happens under the hood, so you won't get any prompts of errors on searching, it will simply fail in the background.
In terms of your other question. By default, topology builder will put your pool name into the external name field. You should change that to whatever name you are using to publish your Lync environment to the internet. You shouldn't use
the same name as your pool. Often times in Lync documentation you will find lyncrp.domain.com or lws.domain.com as the name.
Hope that helps.
Thanks,
Richard
Richard Brynteson, Lync MVP | http://masteringlync.com | http://lyncvalidator.com

Partial name search missing in X3-02

Is ther any way to enable partial name search in Nokia X3-02.
Its a pity that such a basic feature is missing in the latest mobiles.

Its a known limitation of all phones running S40 that the search capabilities of Phonebook are quite limited. Have not seen any third party java app for that either.

How to find folders and files by its partial name c#

in a specific folder of my hard drive i have stored many other sub folder and files. now i want to list those folders and files name by their partial name.
for example
c webapi xx folder
c mvctutorial xx folder
done webapi xx folder
webapi done folder
webapi.zip file
mvc.iso file
now when i like to search by partial name webapi then i want to get list of files and folders name which has webapi word. i want to show their full folder or file name in grid with their full path and size. like below way.
Name Type location Size
c webapi xx folder c:\test1 2 KB
c mvctutorial xx folder c:\test3 3 KB
done webapi xx folder c:\test1 11 KB
webapi done folder c:\test1 9 KB
webapi.zip file c:\test1 20 KB
mvc.iso file c:\test4 5 KB
i got a sample code which look like for finding files but the below code may not find folder. so i am looking for a sample code which will find files and folders too. so guide me to solve my issue.
the below sample code will find files but not sure does it find files by partial name. here is the code. i am not before dev environment. so could not test the below code.
find files code
static void Main(string[] args)
string partialName = "webapi";
DirectoryInfo hdDirectoryInWhichToSearch = new DirectoryInfo(@"c:\");
FileInfo[] filesInDir = hdDirectoryInWhichToSearch.GetFiles("*" + partialName + "*.*");
foreach (FileInfo foundFile in filesInDir)
string fullName = foundFile.FullName;
Console.WriteLine(fullName);

See code below
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.IO;
namespace ConsoleApplication1
class Program
static void Main(string[] args)
string partialName = "webapi";
DirectoryInfo hdDirectoryInWhichToSearch = new DirectoryInfo(@"c:\");
FileInfo[] filesInDir = hdDirectoryInWhichToSearch.GetFiles("*" + partialName + "*.*");
foreach (FileInfo foundFile in filesInDir)
string fullName = foundFile.FullName;
Console.WriteLine(fullName);
DirectoryInfo[] foldersInDir = hdDirectoryInWhichToSearch.GetDirectories("*" + partialName + "*.*");
foreach (DirectoryInfo foundFolder in foldersInDir)
string fullName = foundFolder.FullName;
Console.WriteLine(fullName);
// or
List<string> filesInDir2 = hdDirectoryInWhichToSearch.GetFiles("*" + partialName + "*.*").Select(x => x.FullName).ToList();
filesInDir2.AddRange( hdDirectoryInWhichToSearch.GetDirectories("*" + partialName + "*.*").Select(x => x.FullName).ToList());
foreach (string filesFolders in filesInDir2)
Console.WriteLine(filesFolders);
jdweng

My Search Window is not remembering any names that I type in. How can I fix it so the search window will remember what I type in.

My Search Window does not remember any names that I type in. What can I do to bring it back like it was?

This just started happening less than a week ago. Before that, everything was fine. I do not know what happened to cause this. What is a "build-in about home page?" I really do not know about all this technical stuff. Is the location bar the same as my search window.....in the middle of the page.....that I use to type things in? I never type ANYTHING in the top of the screen bar that is located on the same line as the "back" and "forward" button. What do I do now?

Alias the column name

Hi all,
I want to alias the column name form Location to "Location Name".
say for example:
select location_name as Location Name from Location_table;
i know that the above query will give erroe.
here initially my column name is Location_name, but i want is "*Location Name*".
(there should be a space in between the two words)
Can anybody help me?
Thanks in advance,
Vinay

select location_name as "Location Name" from Location_table;- Mahesh Kaila

Search Asset according to Asset type name

Hello experts,
please, is there a possibility to search Asset according to Asset Type name (which is visible in T.Code AS03 on tab Origin)?
Or is this value available in some standard report?
Thank you,
Ondrej

I found it - in transaction S_ALR_87011963 it is possible to click on Dynamic selections and there in Origin data doubleclick on Type name.

Searching for movie data in file Name-FIN-00000001

While starting up FCP (6.0.6) gives an error message "Searching for movie data in file Name-FIN-00000001".
After 10 to 20 min FCP will start up.
How do I get rid of this annoying error message when starting up?
Thanks W.

As Jim says, this is a render file. However, simply rendering it won't fix this. What is causing this error is a QT reference movie in the project. When you export a QT movie, and make don't make it self contained, it is a reference movie that references media files and render files. When a render file is deleted (FCP does this automatically when the render file is no longer needed) then the refrerence movie can no longer function... one file it references is gone. Simply re-rendering won't fix it, because it is referencing that SPECIFIC render file.
You need to find and delete the QT Reference movie from your project.
Shane

Alias with field name in MS SQL Server

Is it possible that we can define alias for field name in MS SQL Server?
For example:
mytable : Id, Name, Value
Could we define "AnotherName" for "Name" field that we can call it from sql
SELECT anothername from mytable

I don't know if you can "permanently" create an alias
without a view or something like that but if you just
want another name when you execute a select do this:
Select name as another name from tableAt least in some databases the syntax for that can vary slightly. So the following might be needed....
Select name as 'another name' from table

NEED TO SEARCH BY COMPANY, NOT JUST BY NAME

I would love to use my apple software for contact management but you cant search the database by company, only name. For those of us with huge business databases this is entirely impractical. I am forced to use microsoft products rather than apple products for this reason. Hey Apple, give me this one littel concession so I can boot Microsoft completely!

First, which application are you talking about? (This is the mail & Address Book forum.)
Second, this is a user-to-user forum -- any Apple involvement is generally limited to moderating forum messages. Send feedback to Apple using the link available from the main Tiger support page: Apple - Support - Discussions - Mac OS X v10.4 Tiger.
Third, AFAIK both Mail & Address Book can be searched on any content, including company name. Spotlight can also search you entire hard drive for the same, with a few exceptions. So, it is hard to know what you mean by your comments.
Care to elaborate?

How to search for a Class by incomplete name?

Hello.
Does anyone know if it is possible to get an instance of the Class object for a class that I don't have a fully qualified name for?
For example, I want to get the object I would normally get by calling
my.project.package.web.jsf.MyConstants.classexcept that I only have the "MyConstants" part of the name.
Is it possible to somehow use the classloader to search for <i>my.project.package.web.jsf.MyConstants</i> class when I only have <i>MyConstants</i> to start with?
Thanks.

vace117 wrote:
Besides, getting this to work is not really that important. At this point it mostly bothers me as a theoretical question. Can it be done?If you're asking whether it's possible to have a situation where you have two classes with the same name, but in different packages, and that the JVM can look at just the class name and figure out which of the two classes you really meant to use...well, sure, in that (I suppose) you could write something that would search the entire classpath looking for the matching classes, and then apply some heuristics with something like BCEL to try to guess which class you really meant to use. It'll be ugly code and it won't be foolproof, but if you really want it...there you go.
Ultimately, there's a baseline of information that the JVM needs -- in this case the full name of the class. If you start with only partial information, you're going to have to provide some way to derive the full information. Information doesn't just pop into existence magically. The cleanest, easiest way to provide the information is to provide all of it to begin with. The second cleanest, easiest way is to prepend a standard package name. It gets uglier from there.
You could do is design a custom classloader that specifies classes in a different way...but I suspect that you'd find that ugly as well.

IView to search vendor code based on Vendor Name

Hi Guys
We have developed an Web Template in BW 3.5 to browse quality score for our suppliers. The selection screen is expecting to have a Vendor Code Number being input. However, our management is not always aware of the code. The dimension used in 0VENDOR. Did somebody create an application (BSP, JSP, ...)to we could put in a EP6 iView that would allow me to enter a partial segment of a vendor name , it would go either in R3 or BW, and it would return all the vendor code(s) containing the segment and then I would be able to choose the vendor code i want to extract data from... Basically something similar than performing a search from MK03
Thanks!
Eric L.

Thanks for the reply.
My manager posted many of his articles through his meta link ID but kept my name as the Author.
So I want to go through those metalink notes. Since my manager has left the current organization I am unable to reach him
Please guide me

Connection failed - automatically search for broken alias?

I recently replaced an old network drive. Now - whenever I launch iPhoto I get an error:
Connection failed The server “NASX6 (AFP)” may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again.
I think I have an alias somewhere in my library that points to the old network drive but I don't know where. I also have over 40,000 photos in hundreds of folders so searching manually doesn't seem to be an option.
Is there a way to run a search for aliases that are broken - or even just aliases in general?
Thanks,
Matt
Message was edited by: MattMcL

No - that is one (of many) why referenced libraries are strongly discouraged
someone posted a method that they claim will reconnect the aliases - http://discussions.apple.com/thread.jspa?threadID=2744741&tstart=0
I have no idea what it does or how it works (or if it does for that matter) - as always backup prior to making changes
LN

Can't search contents of files only file names.

I am really stuck guys. It's been aggrevating me for days. I tried to download 3rd party programs for searching in files and it still doesn't work. I checked the forums here and people only have trouble searching for kinds of files. Even when I use search strings like "contents" or "description" it still will only look for file names not contents.
It's frustrating because I am typing up my own personal book and I am in the process of fixing all the mistakes which requires searching by contents in my folder where my files are stored!
Thanks in advance!

I've tried various file types.
I tried adding my HD to the list and literally waited 1 minuted but to no avail.
The next step is probably reinstalling Snow Leopard, right?
By the way, I mostly use Finder for searching, so how would I enable the indexing there? Or is it only spotlight that has this indexing thing?

Search emailids by alias or partial names

Similar Messages

Maybe you are looking for