Search groups with multiple rows into a sngle row

Hey all I have a view similar to the one below what I am trying to do is get the projects that have been fully completed. Meaning all items in that order have been sent. If there is an assignment within that project that has only been partially completed that that order must not show.
Project ID || assignment ID || status
100 1001 COMPLETE
100 1002 COMPLETE
100 1003 COMPLETE
100 1004 COMPLETE
200 2001 NOT COMPLETE
200 2002 COMPLETE
300 3001 COMPLETE
300 3002 COMPLETE
300 3003 COMPLETE
400 4001 COMPLETE
The result should be
Project ID
100
300
400

<> sign in Todd's query means that result of subquery should be all rows where value in status column is differ from "COMPLETE" for related id in main query. If at least one row will have value other than "COMPLETE" condition will be failed and value in main query will not be returned.
Peter D.

Similar Messages

Selectively Format Groups with Multiple Columns

I have a bit of an obscure task I've been trying to hammer out to no avail. I've searched quite a bit but can't seem to find anyone else who has attempted this. I have two group by statements, one is a category and the other is a rank. What I'm trying to do is organize the report so that there are category rows and below each category row is a set of columns for each rank with their associated values as such:
category1
rank1     rank2     rank3     rank4
value1   value1    value1   value1
value2   value2    value2   value2
category2
rank1     rank2     rank3
value1   value1    value1
value2   value2    value2
I've tried using details>Section Expert>>Layout>Format Groups with multiple column. Unfortunately, this applies to both groups putting the categories into columns instead of rows, making a mess. Does anyone know of a way to selectively put groups into columns and ensure alignment? In the above example the user would be able to compare rank values from multiple categories since they all line up. Any help with this would be very much appreciated.

Hi,
Have you tried using a crosstab? Give this a shot:
1) Group the report on Category
2) Create a new group header section. Group Header b
3) Place a crosstab in this section
4) The columns would be the Rank field, I'm not sure about what you would like to show in the rows
5) The summarized field would be the Value field ofcourse
Let me know how this goes.
-Abhilash

How to print an excel file (2010 version) with multiple tabs into a pdf file with bookmarks (acrobat 9). I was able to do this easily using excel (2007 version).

Recently I got a new laptop, with excel 2010 version and acrobat 9 standard.
I could no longer print (save as) an excel file with multiple tabs into a pdf file with bookmarks.
My old computer has excel 2007 version and acrobat 9 standard.
Print an excel file into pdf with bookmarks was a piece of cake.
Both machine has the same add-in -- Acrobat PDFMaker Office COM addin
Thanks if anyone could help me with this.
Tom

You need to upgrade Acrobat to a newer version.
On Thu, Oct 30, 2014 at 4:12 PM, excel-pdf-bookmarks <

HP Officejet 6500A How do I scan a document with multiple pages into one file?

HP Officejet 6500A Plus e-All-in-One Printer - E710n
Windows 7 (64 bit)
How do I scan a document with multiple pages into one file? My old printer (psc 2110) asked after each scan if I wanted to scan another page. At the end I had one pdf file with multiple pages.
This new one creates one file for each page and I cannot find a way to create one pdf file with multiple pages.
This question was solved.
View Solution.

Hi mpw101,
If you load the papers into the ADF - Automatic Document Feeder, and then select Document to PDF then they will all be scanning into one file. Let me know if this works for you?
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Merging two rows into a single row

Hi ,
I wish to merge few columns of tow rows into a single row.
if i use union it gives two rows as o/p.
What is the exact sql statement for that?
Thanks

Hi Sridhar,
This is my code for merging and i used union.
Suggest me good solution.
CREATE OR REPLACE VIEW INSPECTINT.INSPECT_LOC_TRACKING_RPT_VIEW AS
SELECT
VEN_COMPANY_NAME VEN_COMPANY_NAME,
VEN_COMPANY_NAME_2 VEN_COMPANY_NAME_2,
VEN_CONTACT_FIRST_NAME VEN_CONTACT_FIRST_NAME,
VEN_CONTACT_MIDDLE_NAME VEN_CONTACT_MIDDLE_NAME,
VEN_CONTACT_LAST_NAME VEN_CONTACT_LAST_NAME,
VEN_ADDRESS_LINE_1 VEN_ADDRESS_LINE_1,
VEN_ADDRESS_LINE_2 VEN_ADDRESS_LINE_2,
VEN_CITY VEN_CITY,
VEN_CNT_COUNTY_CODE VEN_CNT_COUNTY_CODE,
VEN_STC_STATE_CODE VEN_STC_STATE_CODE,
VEN_ZIP_CODE VEN_ZIP_CODE,
VEN_PHONE_NO_1 VEN_PHONE_NO_1,
VEN_PHONE_EXTN_1 VEN_PHONE_EXTN_1,
VEN_PHONE_NO_2 VEN_PHONE_NO_2,
VEN_PHONE_EXTN_2 VEN_PHONE_EXTN_2,
VEN_FAX_NO_1 VEN_FAX_NO_1,
VEN_VENDOR_NO VEN_VENDOR_NO,
VEN_APV_AP_VENDOR_ID VEN_APV_AP_VENDOR_ID,
VEN_EMAIL_ADDRESS VEN_EMAIL_ADDRESS,
--all these should be null
to_number(NULL) PHY_LCN_PARAMETER_ID,
to_char(NULL) PHY_LCN_CURRENT_ADDRESS_IND,
to_char(NULL) PHY_LCN_STATUS_CODE,
to_char(NULL) PHY_LCN_LTY_LOCATION_TYPE,
to_char(NULL) PHY_LCN_ADT_ADDRESS_TYPE,
to_char(NULL) PHY_LCN_HOUSE_NO,
to_char(NULL) PHY_LCN_ADDRESS_LINE_1,
to_char(NULL) PHY_LCN_ADDRESS_LINE_2,
to_char(NULL) PHY_LCN_CITY,
to_char(NULL) PHY_LCN_STC_STATE_CODE,
to_char(NULL) PHY_LCN_ZIP_CODE,
to_char(NULL) PHY_LCN_CNT_COUNTY_CODE,
to_date(NULL) PHY_END_DATE,
to_number(NULL) PHY_LCN_VEN_VENDOR_ID_GTA,
to_char(NULL) PHY_LCN_SUB_LOCATION_GTA,
to_char(NULL) PHY_LCN_DIRECTION_GTA,
---all these should be null
to_char(NULL) LOW_LCN_PARAMETER_ID,
to_char(NULL) LOW_LCN_CURRENT_ADDRESS_IND,
to_char(NULL) LOW_LCN_STATUS_CODE,
to_char(NULL) LOW_LCN_LTY_LOCATION_TYPE,
to_char(NULL) LOW_LCN_ADT_ADDRESS_TYPE,
to_char(NULL) LOW_LCN_HOUSE_NO,
to_char(NULL) LOW_LCN_ADDRESS_LINE_1,
to_char(NULL) LOW_LCN_ADDRESS_LINE_2,
to_char(NULL) LOW_LCN_CITY,
to_char(NULL) LOW_LCN_STC_STATE_CODE,
to_char(NULL) LOW_LCN_ZIP_CODE,
to_char(NULL) LOW_LCN_CNT_COUNTY_CODE,
to_char(NULL) LOW_LCN_LANDLORD,
to_number(NULL) LOW_LCN_LANDLORD_PHONE,
to_date(NULL) LOW_END_DATE,
to_char(NULL) LOW_LCN_SUB_LOCATION_GTA,
to_char(NULL) LOW_LCN_DIRECTION_GTA
FROM LOCATIONS LOC , VENDORS VEN
WHERE LOC.LCN_VEN_VENDOR_ID_GTA IS NOT NULL
AND LOC.LCN_VEN_VENDOR_ID_GTA = VEN_VENDOR_ID
AND LOC.LCN_LTY_LOCATION_TYPE ='AS'
UNION ALL
SELECT
to_char(NULL) VEN_COMPANY_NAME,
to_char(NULL) VEN_COMPANY_NAME_2,
to_char(NULL) VEN_CONTACT_FIRST_NAME,
to_char(NULL) VEN_CONTACT_MIDDLE_NAME,
to_char(NULL) VEN_CONTACT_LAST_NAME,
to_char(NULL) VEN_ADDRESS_LINE_1,
to_char(NULL) VEN_ADDRESS_LINE_2,
to_char(NULL) VEN_CITY,
to_char(NULL) VEN_CNT_COUNTY_CODE,
to_char(NULL) VEN_STC_STATE_CODE,
to_char(NULL) VEN_ZIP_CODE,
to_number(NULL) VEN_PHONE_NO_1,
to_number(NULL) VEN_PHONE_EXTN_1,
to_number(NULL) VEN_PHONE_NO_2,
to_number(NULL) VEN_PHONE_EXTN_2,
to_number(NULL) VEN_FAX_NO_1,
to_char(NULL) VEN_VENDOR_NO,
to_char(NULL) VEN_APV_AP_VENDOR_ID,
to_char(NULL) VEN_EMAIL_ADDRESS,
decode(lcn_adt_address_type,'P',to_number(LCN_PARAMETER_ID),to_number(NULL)) PHY_LCN_PARAMETER_ID,
decode(lcn_adt_address_type,'P',LCN_CURRENT_ADDRESS_IND,to_char(NULL)) PHY_LCN_CURRENT_ADDRESS_IND,
decode(lcn_adt_address_type,'P',LCN_STATUS_CODE,to_char(NULL)) PHY_LCN_STATUS_CODE,
decode(lcn_adt_address_type,'P',LCN_STATUS_CODE,to_char(NULL)) PHY_LCN_LTY_LOCATION_TYPE,
decode(lcn_adt_address_type,'P',LCN_ADT_ADDRESS_TYPE,to_char(NULL)) PHY_LCN_ADT_ADDRESS_TYPE,
decode(lcn_adt_address_type,'P',LCN_HOUSE_NO,to_char(NULL)) PHY_LCN_HOUSE_NO,
decode(lcn_adt_address_type,'P',LCN_ADDRESS_LINE_1,to_char(NULL)) PHY_LCN_ADDRESS_LINE_1,
decode(lcn_adt_address_type,'P',LCN_ADDRESS_LINE_2,to_char(NULL)) PHY_LCN_ADDRESS_LINE_2,
decode(lcn_adt_address_type,'P',LCN_CITY,to_char(NULL)) PHY_LCN_CITY,
decode(lcn_adt_address_type,'P',LCN_STC_STATE_CODE,to_char(NULL)) PHY_LCN_STC_STATE_CODE,
decode(lcn_adt_address_type,'P',LCN_ZIP_CODE,to_char(NULL)) PHY_LCN_ZIP_CODE,
decode(lcn_adt_address_type,'P',LCN_CNT_COUNTY_CODE,to_char(NULL)) PHY_LCN_CNT_COUNTY_CODE,
decode(lcn_adt_address_type,'P',END_DATE,to_char(NULL)) PHY_END_DATE,
decode(lcn_adt_address_type,'P',LCN_VEN_VENDOR_ID_GTA,to_char(NULL)) PHY_LCN_VEN_VENDOR_ID_GTA,
decode(lcn_adt_address_type,'P',LCN_SUB_LOCATION_GTA,to_char(NULL)) PHY_LCN_SUB_LOCATION_GTA,
decode(lcn_adt_address_type,'P',LCN_DIRECTION_GTA,to_char(NULL)) PHY_LCN_DIRECTION_GTA,
decode(LCN_ADT_ADDRESS_TYPE,'D',LCN_PARAMETER_ID,to_char(NULL)) LOW_LCN_PARAMETER_ID,
decode(LCN_ADT_ADDRESS_TYPE,'D',LCN_CURRENT_ADDRESS_IND,to_char(NULL)) LOW_LCN_CURRENT_ADDRESS_IND,
decode(LCN_ADT_ADDRESS_TYPE,'D',LCN_STATUS_CODE,to_char(NULL)) LOW_LCN_STATUS_CODE,
decode(LCN_ADT_ADDRESS_TYPE,'D',LCN_LTY_LOCATION_TYPE,to_char(NULL)) LOW_LCN_LTY_LOCATION_TYPE,
decode(LCN_ADT_ADDRESS_TYPE,'D',LCN_ADT_ADDRESS_TYPE,to_char(NULL)) LOW_LCN_ADT_ADDRESS_TYPE,
decode(LCN_ADT_ADDRESS_TYPE,'D',LCN_HOUSE_NO,to_char(NULL)) LOW_LCN_HOUSE_NO,
decode(LCN_ADT_ADDRESS_TYPE,'D',LCN_ADDRESS_LINE_1,to_char(NULL)) LOW_LCN_ADDRESS_LINE_1,
decode(LCN_ADT_ADDRESS_TYPE,'D',LCN_ADDRESS_LINE_2,to_char(NULL)) LOW_LCN_ADDRESS_LINE_2,
decode(LCN_ADT_ADDRESS_TYPE,'D',LCN_CITY,to_char(NULL)) LOW_LCN_CITY,
decode(LCN_ADT_ADDRESS_TYPE,'D',LCN_STC_STATE_CODE,to_char(NULL)) LOW_LCN_STC_STATE_CODE,
decode(LCN_ADT_ADDRESS_TYPE,'D',LCN_ZIP_CODE,to_char(NULL)) LOW_LCN_ZIP_CODE,
decode(LCN_ADT_ADDRESS_TYPE,'D',LCN_CNT_COUNTY_CODE,to_char(NULL)) LOW_LCN_CNT_COUNTY_CODE,
decode(LCN_ADT_ADDRESS_TYPE,'D',LCN_LANDLORD,to_char(NULL)) LOW_LCN_LANDLORD,
decode(LCN_ADT_ADDRESS_TYPE,'D',LCN_LANDLORD_PHONE,to_char(NULL)) LOW_LCN_LANDLORD_PHONE,
decode(LCN_ADT_ADDRESS_TYPE,'D',END_DATE,to_char(NULL)) LOW_END_DATE,
decode(LCN_ADT_ADDRESS_TYPE,'D',LCN_SUB_LOCATION_GTA,to_char(NULL)) LOW_LCN_SUB_LOCATION_GTA,
decode(LCN_ADT_ADDRESS_TYPE,'D',LCN_DIRECTION_GTA,to_char(NULL)) LOW_LCN_DIRECTION_GTA
FROM LOCATIONS LOC
WHERE (LCN_LTY_LOCATION_TYPE ='AS' OR LCN_ADT_ADDRESS_TYPE='D')
AND LCN_CURRENT_ADDRESS_IND ='Y'
thanks

Need help with turning multiple rows into a single row

Hello.
I've come across a situation that is somewhat beyond my knowledge base. I could use a little help with figuring this out.
My situation:
I am attempting to do some reporting from a JIRA database. What I am doing is getting the dates and times for specific step points of a ticket. This is resulting in many rows per ticket. What I need to do is return one row per ticket with a calculation of time between each step. But one issue is that if a ticket is re-opened, I want to ignore all data beyond the first close date. Also, not all tickets are in a closed state. I am attaching code and a sample list of the results. If I am not quite clear, please ask for information and I will attempt to provide more. The database is 10.2.0.4
select jiraissue.id, pkey, reporter, summary
,changegroup.created change_dt
,dbms_lob.substr(changeitem.newstring,15,1) change_type
,row_number() OVER ( PARTITION BY jiraissue.id ORDER BY changegroup.created ASC ) AS order_row
from jiraissue
,changeitem, changegroup
,(select * from customfieldvalue where customfield = 10591 and stringvalue = 'Support') phaseinfo
where jiraissue.project = 10110
and jiraissue.issuetype = 51
and dbms_lob.substr(changeitem.newstring,15,1) in ('Blocked','Closed','Testing','Open')
and phaseinfo.issue = jiraissue.id
and changeitem.groupid = changegroup.id
and changegroup.issueid = jiraissue.id
order by jiraissue.id,change_dt
Results:
1     21191     QCS-91     Error running the Earliest-deadlines flight interface request/response message     2008-07-16 9:30:38 AM     Open     1
2     21191     QCS-91     Error running the Earliest-deadlines flight interface request/response message     2008-07-16 11:37:02 AM     Testing     2
3     21191     QCS-91     Error running the Earliest-deadlines flight interface request/response message     2010-06-08 9:14:52 AM     Closed     3
4     21191     QCS-91     Error running the Earliest-deadlines flight interface request/response message     2010-09-02 11:29:37 AM     Open     4
5     21191     QCS-91     Error running the Earliest-deadlines flight interface request/response message     2010-09-02 11:29:42 AM     Open     5
6     21191     QCS-91     Error running the Earliest-deadlines flight interface request/response message     2010-09-02 11:29:50 AM     Testing     6
7     21191     QCS-91     Error running the Earliest-deadlines flight interface request/response message     2010-09-02 11:29:53 AM     Closed     7
8     23234     QCS-208     System Baseline - OK button does not show up in the Defer Faults page for the System Engineer role      2008-10-03 10:26:21 AM     Open     1
9     23234     QCS-208     System Baseline - OK button does not show up in the Defer Faults page for the System Engineer role      2008-11-17 9:39:39 AM     Testing     2
10     23234     QCS-208     System Baseline - OK button does not show up in the Defer Faults page for the System Engineer role      2011-02-02 6:18:02 AM     Closed     3
11     23977     QCS-311     Tally Sheet - Reason Not Done fails to provide reason for unassigned tasks     2008-09-29 2:44:54 PM     Open     1
12     23977     QCS-311     Tally Sheet - Reason Not Done fails to provide reason for unassigned tasks     2010-05-29 4:47:37 PM     Blocked     2
13     23977     QCS-311     Tally Sheet - Reason Not Done fails to provide reason for unassigned tasks     2011-02-02 6:14:57 AM     Open     3
14     23977     QCS-311     Tally Sheet - Reason Not Done fails to provide reason for unassigned tasks     2011-02-02 6:15:32 AM     Testing     4
15     23977     QCS-311     Tally Sheet - Reason Not Done fails to provide reason for unassigned tasks     2011-02-02 6:15:47 AM     Closed     5

Hi,
Welcome to the forum!
StblJmpr wrote:
... I am attempting to do some reporting from a JIRA database. What is a JIRA database?
I am attaching code and a sample list of the results. If I am not quite clear, please ask for information and I will attempt to provide more. Whenever you have a question, please post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables involved, and the results you want from that data.
Simplify the problem as much as possible. For example, if the part you don't know how to do only involves 2 tables, then jsut post a question involving those 2 tables. So you might just post this much data:
CREATE TABLE     changegroup
(      issueid          NUMBER
,      created          DATE
,      id          NUMBER
INSERT INTO changegroup (issueid, created, id) VALUES (21191, TO_DATE ('2008-07-16 09:30:38 AM', 'YYYY-MM-DD HH:MI:SS AM'), 10);
INSERT INTO changegroup (issueid, created, id) VALUES (21191, TO_DATE ('2008-07-16 11:37:02 AM', 'YYYY-MM-DD HH:MI:SS AM'), 20);
INSERT INTO changegroup (issueid, created, id) VALUES (21191, TO_DATE ('2010-06-08 09:14:52 AM', 'YYYY-MM-DD HH:MI:SS AM'), 90);
INSERT INTO changegroup (issueid, created, id) VALUES (21191, TO_DATE ('2010-09-02 11:29:37 AM', 'YYYY-MM-DD HH:MI:SS AM'), 10);
INSERT INTO changegroup (issueid, created, id) VALUES (21191, TO_DATE ('2010-09-02 11:29:42 AM', 'YYYY-MM-DD HH:MI:SS AM'), 10);
INSERT INTO changegroup (issueid, created, id) VALUES (21191, TO_DATE ('2010-09-02 11:29:50 AM', 'YYYY-MM-DD HH:MI:SS AM'), 20);
INSERT INTO changegroup (issueid, created, id) VALUES (21191, TO_DATE ('2010-09-02 11:29:53 AM', 'YYYY-MM-DD HH:MI:SS AM'), 90);
INSERT INTO changegroup (issueid, created, id) VALUES (23234, TO_DATE ('2008-10-03 10:26:21 AM', 'YYYY-MM-DD HH:MI:SS AM'), 10);
INSERT INTO changegroup (issueid, created, id) VALUES (23234, TO_DATE ('2008-11-17 09:39:39 AM', 'YYYY-MM-DD HH:MI:SS AM'), 20);
INSERT INTO changegroup (issueid, created, id) VALUES (23234, TO_DATE ('2011-02-02 06:18:02 AM', 'YYYY-MM-DD HH:MI:SS AM'), 90);
INSERT INTO changegroup (issueid, created, id) VALUES (23977, TO_DATE ('2008-09-29 02:44:54 PM', 'YYYY-MM-DD HH:MI:SS AM'), 10);
INSERT INTO changegroup (issueid, created, id) VALUES (23977, TO_DATE ('2010-05-29 04:47:37 PM', 'YYYY-MM-DD HH:MI:SS AM'), 30);
INSERT INTO changegroup (issueid, created, id) VALUES (23977, TO_DATE ('2011-02-02 06:14:57 AM', 'YYYY-MM-DD HH:MI:SS AM'), 10);
INSERT INTO changegroup (issueid, created, id) VALUES (23977, TO_DATE ('2011-02-02 06:15:32 AM', 'YYYY-MM-DD HH:MI:SS AM'), 20);
INSERT INTO changegroup (issueid, created, id) VALUES (23977, TO_DATE ('2011-02-02 06:15:47 AM', 'YYYY-MM-DD HH:MI:SS AM'), 90);
CREATE TABLE     changeitem
(      groupid          NUMBER
,      newstring     VARCHAR2 (10)
INSERT INTO changeitem (groupid, newstring) VALUES (10, 'Open');
INSERT INTO changeitem (groupid, newstring) VALUES (20, 'Testing');
INSERT INTO changeitem (groupid, newstring) VALUES (30, 'Blocked');
INSERT INTO changeitem (groupid, newstring) VALUES (90, 'Closed');Then post the results you want to get from that data, like this:
ISSUEID HISTORY
21191 Open (0) >> Testing (692) >> Closed
23234 Open (45) >> Testing (807) >> Closed
23977 Open (607) >> Blocked (249) >> Open (0) >> Testing (0) >> ClosedExplain how you get those results from that data. For example:
"The output contains one row per issueid. The HISTORY coloumn shows the different states that the issue went through, in order by created, starting with the earliest one and continuing up until the first 'Closed' state, if there is one. Take the first row, issueid=21191, for example. It started as 'Open' on July 16, 2008, then, on the same day (that is, 0 days later) changed to 'Testing', and then, on June 8, 2010, (692 days later), it became 'Closed'. That same issue opened again later, on September 2, 2010, but I don't want to see any activity after the first 'Closed'."
The database is 10.2.0.4That's very important. Always post your version, like you did.
Here's one way to get those results from that data:
WITH     got_order_row     AS
     SELECT     cg.issueid
     ,     LEAD (cg.created) OVER ( PARTITION BY cg.issueid
                                      ORDER BY      cg.created
              - cg.created            AS days_in_stage
     ,       ROW_NUMBER ()     OVER ( PARTITION BY cg.issueid
                                      ORDER BY      cg.created
                           )    AS order_row
     ,     ci.newstring                     AS change_type
     FROM    changegroup     cg
     JOIN     changeitem     ci ON   cg.id     = ci.groupid
     WHERE     ci.newstring     IN ( 'Blocked'
                       , 'Closed'
                       , 'Testing'
                       , 'Open'
--     AND     ...          -- any other filtering goes here
SELECT       issueid
,       SUBSTR ( SYS_CONNECT_BY_PATH ( change_type || CASE
                                                         WHEN CONNECT_BY_ISLEAF = 0
                                       THEN ' ('
                                          || ROUND (days_in_stage)
                                          || ')'
                                                     END
                                , ' >> '
           , 5
           )     AS history
FROM       got_order_row
WHERE       CONNECT_BY_ISLEAF     = 1
START WITH     order_row          = 1
CONNECT BY     order_row          = PRIOR order_row + 1
     AND     issueid               = PRIOR issueid
     AND     PRIOR change_type     != 'Closed'
ORDER BY issueid
;Combining data from several rows into one big delimited VARCHAR2 column on one row is call String Aggregation .
I hope this answers your question, but I guessed at so many things, I won't be surprised if it doesn't. If that's the case, point out where this is wrong, post what the results should be in those places, and explain how you get those results. Post new data, if necessary.

SSL Multiple Tunnel Groups with Multiple group policies

Hello folks.
Have a query and cant seem to find an answer on the web.
I have configured SSL Clientless VPN on a lab ASA5510, using 2 tunnel groups, one for enginneers and one for staff, mapped to 2 different group policies, each with different customisation. I have mapped the AD groups to the tunnel groups using both ACS and now LDAP (currently in use), both working successfully, using group lock and LDAP map of IETF-Radius-Class to Group name ensures engineers get assigned to the engineers tunnel group and staff get mapped to the staff tunnel group only.
The question i have is....is there a way to use a single tunnel group to map the user based on AD group which will then use the correct Group-policy (1 tunnel group to multiple group-polciies). I have seen examples of doing this with different URLs but want to know if they can all use the same URL and avoid using the drop down list using aliases.
It may be a simple "No" but it would be nice to know how to do it without using the URLs or drop down list. Users are easily confused ......

Easy. Disable the drop-down list, and use the authentication-server (LDAP or Radius) in the DefaultWEBVPNGroup. By default when you browse to the ASA, it will be using the DefaultWEBVPNGroup. Let LDAP or Radius take care of the rest.
You will get the functionality you are looking for.
HTH
PS. If this post was helpful, please rate it.

Multiple rows into a single row.

Table structure:
CREATE TABLE JOB_ERROR_MESSAGE_TMP
ERROR_LOG VARCHAR2(1000 BYTE)
This table gets populated with multiple records (approx 20) from the log file of my application.
Example of Data (12 rows below):
ERROR_LOG
XXXXXXXX(Error)-ORA-01756-ZZZZZZZZZZZZZ-quoted string not properly terminated
line1 of error1
line2 of error1
line3 of error1
XXXXXXXX(Error)-DBS-0000-ZZZZZZZZZZZZZ-SOME ERROR
line1 of error2
line2 of error2
XXXXXXXX(Error)-DBS-1111-ZZZZZZZZZZZZZ-SOME NEW ERROR
line1 of error3
line2 of error3
line2 of error4
line4 of error3
I am interested in only the first error. That is: all the rows until the second occurrence of word "(ERROR)"
Desired output:
ORA-01756,quoted string not properly terminated,line1 of error1,line2 of error1,line3 of error1
That is:
The 9 digit code which exists after the 1st encounter of word '(Error)'||','||trim(First line after error)||','||trim(second line after error)||','||
trim of 3rd line <all the lines untill the line containing '(ERROR)' is encountered>
Any help on this is appreciated.
Thanks in advance
Coolguy

Example...
SQL> ed
Wrote file afiedt.buf
1 with t as (select 1 as ord, 'XXXXXXXX(Error)-ORA-01756-ZZZZZZZZZZZZZ-quoted string not properly terminated' as txt from dual union all
2             select 2, 'line1 of error1' from dual union all
3             select 3, 'line2 of error1' from dual union all
4             select 4, 'line3 of error1' from dual union all
5             select 5, 'XXXXXXXX(Error)-DBS-0000-ZZZZZZZZZZZZZ-SOME ERROR' from dual union all
6             select 6, 'line1 of error2' from dual union all
7             select 7, 'line2 of error2' from dual union all
8             select 8, 'XXXXXXXX(Error)-DBS-1111-ZZZZZZZZZZZZZ-SOME NEW ERROR' from dual union all
9             select 9, 'line1 of error3' from dual union all
10             select 10, 'line2 of error3' from dual union all
11             select 11, 'line2 of error4' from dual union all
12             select 12, 'line4 of error3' from dual)
13 -- end of test data
14 select txt
15 from (
16 select ord, txt, starter, lag(starter) over (order by ord) as prev
17 from (
18 select ord, txt, decode(instr(txt,'(Error)'),0,null,1) as starter
19 from t
20 order by ord
21 )
22 )
23 where coalesce(starter, prev) = 1
24* order by ord
SQL> /
TXT
XXXXXXXX(Error)-ORA-01756-ZZZZZZZZZZZZZ-quoted string not properly terminated
line1 of error1
XXXXXXXX(Error)-DBS-0000-ZZZZZZZZZZZZZ-SOME ERROR
line1 of error2
XXXXXXXX(Error)-DBS-1111-ZZZZZZZZZZZZZ-SOME NEW ERROR
line1 of error3
6 rows selected.
SQL>Your problem is going to be that you haven't got anything in your table which specifies the order of the rows. As such you have an unordered set of data in a table and there is nothing to say which rows of data are associated with other rows. If you want it to work you're going to have to update your table to include a sequence number or a date/timestamp.

Oracle query - Merging multiple rows into a single row output

Hi All,
I have to have a multiple row output to be converted into a single row output.My current output looks as follows:
ID YR INC_CODE OFFN SCHOOLNO
8006 2002 00175 SC03 12
8006 2002 00175 DC06 12
8006 2002 00175 DC03 12
8006 2002 00175 DC02 12
ID,INCIDENT CODE,OFFENSE are all Primary keys
So I need the output as follows:(IN ONE ROW)
ID YR INC_CODE OFFN1 OFFN2 OFFN3 OFFN4 SCHOOLNO
8006 2002 00175 SC03 DC06 DC03 DC02 12
Can you help me on this since have been spinning the wheel and this has to be a query since will have couple of tables join to produce a materialized view.
Thanks in advance

Hi Nigel,
Thanks for the reply I tested out the portion having the decode and I get the output as follows:
ID YR INC_CODE OFFN1 OFFN2 OFFN3 OFFN4 OFFN5
8982 2002 2175 DOC01 -----------------------
8982 2002 2175 DOC02-------------------
8982 2002 2175 DOC03------------
8982 2002 2175 DOC06-------
8982 2002 2175 SCV03
There is no value as max for OFFN and each INC_CODE MAY HAVE UP TO A MAX OF 5 OFFN.My query is as follows:
select distinct STU_STUDENT_ID, INC_BEG_SCH_YR,INC_INCIDENT_CODE
, decode(rank() over (partition by INC_CODE order by OFFN),1,OFFN,null) as offn1
, decode(rank() over (partition by INC_CODE order by OFFN),2,OFFN,null) as offn2
, decode(rank() over (partition by INC_CODE order by OFFN),3,OFFN,null) as offn3
, decode(rank() over (partition by INC_CODE order by OFFN),4,OFFN,null) as offn4
, decode(rank() over (partition by INC_CODE order by OFFN),5,OFFN,null) as offn5
from stu_offn where
stu_offn.ID = '8982' and stu_offn.INC_CODE = '2175'
(****Where clause is just given to just check a value)
So as you know I need to just have all the OFFN in a single row ie as follows:
ID YR INC_CODE OFFN1 OFFN2 OFFN3 OFFN4 OFFN5
8982 2002 2175 DOC01 DOC02 DOC03 DOC06 SCV03
Can you just give me a step by step procedure to go through this and the table in this case is just 'STU_OFFN'
Thanks for the earlier reply appreciate it!
****Sending this again to show the exact way the output is coming

People Picker search order with multiple forest domains

I had customer with multiple forest domain environment. Now the problem is that all users from one domain synced to the resource domain(Domain A) where sharepoint is installed.
The peoplepicker is now finding at first the user in Domain A where sharepoint is installed. My Solution is now to specify the order of searching in People Picker that first all users in Domain B will return and if there is noting will return Domain A.
All SharePoint Server(s) had Network Access to the other Domains. And there are two-way-trust konfigured.
Any Solution for that?
Thanks for your feedback!
P.

Regardless of search order, you would get both results returned. Have you tried using the UserAccountDirectoryPath property on the Site Collection to specify DC=domainB,DC=com?
Trevor Seward
Follow or contact me at...
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.
Nice to now that i can set it up per site collection. But it do not work in my case, it indeed returned users from Domain B but Domain A, C, D and F(Examples) are excluded from People Picker.

Mail Groups with Multiple Contact Email Addresses

I cannot find a way to create a Group in Address Book where the contacts have more than one email address. In fact I have not been able to get emailing to groups with Mail to work at all. I always get prompted to select one of my other outgoing SMTP servers... none of them work, iCloud, Gmail, private domain. I don't understand why this is so difficult.
I have read online that Groups do not support contacts with multiple email addresses... Really? Say it isn't so!

User A can have one mailbox associated with his ID. You can create other "User A" mailboxes with different names and e-mail addresses as shared mailboxes and grant User A full mailbox rights and send as right. User A can
then connect to each one of them separately.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

GROUP WITH MULTIPLE EMAIL MEMBERS

I have a group created whose members have multiple emails. I want to be able to type in the group name, and have ALL emails automatically inserted, not just one per group member.
HOW?

Okay... I spoke a little too soon.
It cuts off my emails at 50 when I have 77. I'll attach my Script. See what you can do.
property defaultGroups : {}
property defaultLabels : {}
-- Prompt for the group to use
tell application "Address Book" to set everyGroup to name of every group
if (count of everyGroup) is greater than 0 then
set theGroups to choose from list everyGroup with prompt ¬
"Send this message to which group?" default items defaultGroups with multiple selections allowed
end if
-- Prompt for message subject
set theResult to display dialog "What would you like the subject of the message to be?" default answer "I'm sending this via AppleScript!"
set theSubject to text returned of theResult
-- Prompt for whether an attachment is desired. If so, prompt for the location of the file.
set theResult to display dialog "Would you like to attach some files to this message?" buttons {"Yes", "No"} default button 1
set wantsAttachment to button returned of theResult
if wantsAttachment is equal to "Yes" then
set theAttachment to choose file
end if
-- Prompt for message body
set theResult to display dialog "What would you like to say in the body of the message?" default answer ""
set theBody to text returned of theResult
-- Go through each account and constuct a list of possible addresses
-- to use as a return address for this message.
tell application "Mail"
set listOfSenders to {}
set everyAccount to every account
repeat with eachAccount in everyAccount
set everyEmailAddress to email addresses of eachAccount
if (everyEmailAddress is not equal to missing value) then
repeat with eachEmailAddress in everyEmailAddress
set listOfSenders to listOfSenders & {(full name of eachAccount & " <"Which account would you like to send this message from?" without multiple selections allowed
if theResult is not equal to false then
set theSender to item 1 of theResult
tell application "Mail"
-- Properties can be specified in a record when creating the message or
-- afterwards by setting individual property values.
set newMessage to make new outgoing message with properties {subject:theSubject, content:theBody & return & return}
tell newMessage
-- Default is false. Determines whether the compose window will
-- show on the screen or whether it will happen in the background.
set visible to true
set sender to theSender
set theEmails to {}
tell application "Address Book"
repeat with aGroup in theGroups
repeat with aPerson in people of group aGroup
repeat with anEmail in emails of aPerson
if (label of anEmail is in defaultLabels) or defaultLabels is {} then
if theEmails does not contain the value of anEmail then
copy (value of anEmail) to end of theEmails
end if
end if
end repeat
end repeat
end repeat
end tell
repeat with anEmail in theEmails
make new to recipient at end of to recipients with properties {address:anEmail}
end repeat
tell content
if (wantsAttachment is equal to "Yes") then
-- Position must be specified for attachments
make new attachment with properties {file name:theAttachment} at after the last paragraph
end if
end tell
end tell
-- Bring the new compose window to the foreground, in all its glory
activate
end tell
end if

Creating new group with multiple contacts

What is the simplest way to create a new group with say 8 or 10 names that have been cc'ed on an e-mail? Essentially, I would like to be able to add all of the names at once to my Address Book, then using this same list create a new group. I can't find a way of doing this other than one at a time, unless I'm missing something obvious. Thanks for any help.

There is collection of AppleScripts called Mail Scripts you can download at this link.
http://homepage.mac.com/aamann/Mail_Scripts.html
The script to use from the collection of scripts is Add Addresses (Mail) which adds addresses found in the selected messages (in the header fields "From", "To", "Cc", and "Bcc") to the Address Book. This is much more flexible than the "Add Sender to Address Book" available in Mail and provides a convenient way for creating mailing lists.

Splitting of a CSV File with Multiple Records into Multiple XML File

Dear All,
<b> I am doing a Scenario of CSV to XML Files. I am using BPM for the same. My incoming CSV File has got multiple records. I want to break this Multiple records into Multiple XML Files having one record each.</b>
Can someone suggest how can I break this rather Split this into Multiple XML Files.
Is Multimapping absoltely necesaary for this. Can't we do this without Multimapping. Can we have some workaround in the FCC parameters that we use in the Integration Directory.
Kindly reply ASAP. Thanks a lot to all in anticipation.
Pls Help.
Best Regards
Chakra and Somnath

Dear All,
I am trying to do the Multimapping, and have 0....unbounded also. Someways it is not working.
<b>
Smitha please tell me one thing...Assigning the Recordsets per Message to 1, does it mean that it will write multiple XML Files as I want.</b>
Also I am usinf Set to Read only. So once the File is read it becomes RA from A. Then will it write the other Records.
I have to use a BPM because there are certain dependencies that are there for the entire Process Flow. I cannot do without a BPM.
Awaiting a reply. Thanks a lot in anticipation.
Best Regards
Chakra and Somnath

Flatten rows into a single row

Hi All,
I have a table1 with records and PK for table 1 is (Date,Time).
All I have to do is for a particular transaction, I have to get all the records and flatten them into a single row.
For ex: Table 1 has the following
Date Time Col1 Value
08/03/2010 10:00am Employee_name John
08/03/2010 10:00am Employee_ID 20
08/03/2010 10:00am Salary 10000
Now I have a table 2 which has the following structure:
Date Time Employee_name Employee_ID Salary
08/03/2010 10:00am John 20 10000
Please let me know how to achieve this.,
Thank You.

Hi,
Are you saying that you want to create table2, given table1?
Displaying one column from many rows as if they were many columns on one row is called a Pivot , and here's one way to do it:
SELECT       date_time
,       MIN (CASE WHEN col1 = 'Employee_name' THEN value END)     AS employee_name
,       MIN (CASE WHEN col1 = 'Employee_ID'      THEN value END)     AS employee_id
,       MIN (CASE WHEN col1 = 'Salary'      THEN value END)     AS salary
FROM       table1
GROUP BY date_time
;Whenever you have a question, say what version of Oracle you're using.
The query above works in Oracle 8.1 and up, but it might be simpler using the SELECT ... PIVOT feature that was introduced in Oracle 11.
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements), and also post the results you want from that data.

Search groups with multiple rows into a sngle row

Similar Messages

Maybe you are looking for