"Search" is missing when i publish to a folder

I've been looking for the answer for 2 days, but no one seems have symptoms like mine.
anyhow...
when i publish to a folder, everything works fine including RSS subscribe but, search field is gone in the blog and podcast pages.
everything else is there on the place, except missing search field.
So, i registered .Mac 60 days free and it's working on .Mac. But in local folder and on my non .Mac server it doesn't show up.
I don't want to buy .Mac for me it's not worth. and i just bought non .mac server just two days ago.
PLEASE HELP!!!
and if you have any idea using comment on blog for non .mac server, please let me know. i use iComment and working well. but it doesnt' look good

Blog Search is a feature only enabled when publishing to .Mac. If you publish to a folder, the search won't publish. It's in the iWeb Help.

Similar Messages

Problems overwriting when I publish to a folder

When I publish to a folder the updated content of my website I get an error message like "files can be damaged or you don´t have enough privileges to do this". I have to delete all the folder and publish it again in a new folder.
Does anyone know how to solve it?
Thank´s

Publishing to a folder is all or nothing.
Either say yes to replace the folder or publish to another location and only replace the page (including the folder that's used by that page) you updated.
As an added note, you should never put custom stuff in such a folder after publishing.

IWeb slideshow giving a 404 error when I publish to a folder

When I publish to a folder and post to my Verizon web space I get a 404 (not found) error on slideshows. I uploaded the same site to my office staging server and it works fine (see test link below) so it must be a problem with Verizon but I can't figure out what. I tried different file names, even a test page with just one image, but no luck. Any thoughts?
Verizon space that slideshows don't work:
http://mysite.verizon.net/macericpet/Home/Welcome.html
test post that works:
http://www.dadesign.com/staging/macericpet/Home/Welcome.html
iMac G5 Mac OS X (10.4.7)

When I publish to a folder and post to my Verizon web
space I get a 404 (not found) error on slideshows. I
uploaded the same site to my office staging server
and it works fine (see test link below) so it must be
a problem with Verizon but I can't figure out what. I
tried different file names, even a test page with
just one image, but no luck. Any thoughts?
Did you use an ftp program to upload to Verizon? Can you verify that you have the same files and structure on both servers? I'm wondering if something got left out in the Verizon space.

Artwork Missing when copying from ITunes Media Folder (iTunes 9.2)

After updating to iTunes 9.2, whenever I wanted to copy one song with Artwork to another folder, the artwork is missing as it did not copy anymore. Even if I look at the Preview window, there is no artwork.
The original song inside my Itunes Media Folder still has the artwork.
This can't be normal. Is there anyway to fix this?

This is a much larger problem with 9.2 corrupting the finder. Check out these following posts on this and other sites:
http://discussions.apple.com/thread.jspa?threadID=2467710
http://discussions.apple.com/thread.jspa?threadID=2464851&start=0&tstart=0
http://forums.macrumors.com/showthread.php?t=940273
http://www.ipodnn.com/articles/10/06/21/itunes.store.videos.unable.to.play/

When publishing to a folder page looks awful once uploaded. Can anyone help

Hi,
I've read through at least 30 pages on this forum and seem to be unable to find something to help me remedy my problem.
I made a really simple site in iWEB. When I publish to a folder and click the "visit this site now" button, everything looks perfect. However, once I upload the site, using Fetch, the site looks awful. The Arial font is replaced by something else. The "made on a mac" image disappears. The navbar is non existent, and none of my other pages display properly (when I manually enter there addresses).
I read a previous post about changing my Fetch settings so that data uploads in binary (raw) form and did that. I tried changing text-encoding in my browser to UTF-8, but that did not help either.
I've cleared the folder on my home computer a number of times and tried republishing and re-uploading and that does not help. I've tried viewing the page in Safari, Mozilla, and Explorer, and it looks terrible in all 3. The site is:
http://web.syr.edu/~ljames
If someone can help me I'd greatly appreciate it. If you need any further info from me, please let me know and I'll do what I can to assist. Thanks.

You have changed the permissions (or they are incorrect) on your home_files directory. I get a forbidden message when trying to access that directory. The sylesheet (css) and other files there dictate how the home page is diplayed. Make sure that all the permissions on the directories for your site are set correctly.
Todd

When I publish my site on one specific page where i've added {tag_pagecontent} I get the error:Some files on the server may be missing or incorrect. Clear browser cache and try again. If the problem persists please contact website author.

When I publish my site on one specific page where I've added {tag_pagecontent} I get the error:
'Some files on the server may be missing or incorrect. Clear browser cache and try again. If the problem persists please contact website author.'
I'm trying to get a blog module going, I've even deleted the html insert bog with the tag in and re-published which then I don't get the error but as a result no blog either. But then I add the tag in again and publish the error comes back. I've used the dev console and it says that my musicians sample.css is out of date but why is it only out of date when I add in html to my muse site?
HELP!!!! I've searched other threads and to no avail I'm publishing so no direct ftp going on. the only thing I changed in business catalyst was the module stylesheet in order to style the blog. I've tried uploading and replacing all files nothing seems to work. the site is here:
http://www.musicstudentsforhire.co.uk/musicians-samples.html
It's only this page as it has the blog on. Also I've noticed when I've re-published occasionally it will show the mobile version on my desktop and not the desktop version??? no idea why that's happening so I've had to turn that off. any explanation on why that is happening would also be much appreciated.

I haven't received an answer as of yet, I'll post t on here when I do. I de-activated the mobile site because it's my clients site so he needs it to be operational during the day. I hope someone gives me an answer soon.

Download Presenter trial in your website but when I published object scorm in zip file miss some important file such as ismmanifest.xml. In fact Moodle upload is wrong! Is it a bug or what? Thank you.

Download Presenter trial in your website but when I published object scorm in zip file miss some important file such as ismmanifest.xml. In fact Moodle upload is wrong! Is it a bug or what? Thank you.

You can publish Adobe Presenter Projects to your Moodle LMS (this will work for many other LMS’ too.)Please follow the steps as mentioned in the blog linked below.
https://blogs.adobe.com/presenter/2013/08/step-by-step-how-do-i-publish-my-presenter-cours e-to-my-learning-management-system.html#more-6260
Regards,
Rajeev.

HT204406 I used Match, and now there are artists missing when I search by artist, yet they are in my library when I search by song. If they are in many song list, why aren't they in my artist list? Also I can't sort my songs by artist on iPhone, so thes

I used Match, and now there are artists missing when I search by artist, yet they are in my library when I search by song. If they are in many song list, why aren't they in my artist list? Also I can't sort my songs list by artist on iPhone, so their music is basically lost in space....help

It's not clear from your post, but you do realise
that if you import a cd as a compilation, it will not
appear under artists? This is done to save the iPod
being cluttered up with single artists entries who
might have only one song listed.
I wasn't aware of that. It's true that I haven't been using the "compilation" tag for a long time. I've only started using it with iTunes 7 as otherwise with Coverflow I would have one album cover for each artist in a compilation. Before that my compilations weren't tagged as such as that is quite probably why each artist from compilations showed up when browsing by artists.
Message was edited by: Didou

When I open iMovie, the app searches for missing iPhoto files. These are files I deleted. I have to close about 30 dialog boxes before I can start using iMovie. How do I make this stop?

When I open iMovie (09), the app searches for missing iPhoto files. These are files I deleted. I have to close about 30 dialog boxes before I can start using iMovie. How do I make this stop?

So it seems the issue is when iMovie is wanting to creat thumbnails, if I ask it to ignore then it's fine but if not it hangs up searching for the video file.

Slides missing when published to avi - HELP!!

Hi there
I've got a huge problem that I jsut can't fix - for two of my Captivate 4 projects, there are whole batches of slides missing (12 in a row is the worst case) when I publish the project as an AVI
I've been working on 12 seperate projects, each containing between 10 - 50 slides, with some audio, FMR and text captions (basically, nothing too complex, as I'm a first time user).
For at least two projects, when I publish to AVI (full frames, uncompressed), the videos just miss whole seconds of footage - there is no gap or silence, and the footage just continues from, say, slide5 straight into the second half of slide14 without a pause or noise.
The project is PERFECT when previewed fully, and when it plays and records itself before the publishing begins. Infact, I've exported it before with no issues.
Any ideas what's going on? Are they just corrupted?
I've tried re-importing the audio on the missing slides, adjusting the slide durations slightly, and basically fiddled with them, but each time I publish, the missing gap is EXACTLY the same.
the only thing I can think of is that I recently copied the whole project folder (with all the linked audio copied over into the same folder directory) from my network drive to my local drive. But as I said, I have other projects that have no, or only insignificant issues during publishing and they were also copied over in the same way.
Tearing my hair out with Captivate at the moment!!
Any help much appreciated!!

I've experienced this type of frustration publishing to SWF format in Captivate 3 which, of course, cannot export to AVI format. I don't know if the solution I've tried will work in Captivate 4, but it's worth a shot.
It was definitely a glitchy thing in Captivate where the program just lost its mind and was ignoring the slides as they were setup. (That's not a professional diagnosis.) In a couple cases, I had to recreate the slide, from scratch, where the issue began and delete its doppelganger. That stopped the issue from starting and the following slides fell in line.
Another time all I had to do was move the audio clips around on the timeline. It was important that I released the clip in a new location before returning it to its original start point. I had to do this on all the affected slides.
There had to be some sort of corruption going on, but these two options helped me at different times. I hope one of them works for you, Robert.
-Marty

Copyright stamp - when I publish photo's directly from LR3 to Facebook the copyright is missing?

My images are copyrighted and if for example I export the photos to a folder and then upload the photos from that photo to Facebook the Copyright stamp is there as it should be. However when I publish directly from Lightroom to Facebook the copyright is missing and I can't figure out why this is? Any help would be appreciated!

Thank you Klaus1.The large font, I copied and pasted from my mail box.I'm visually impaired...not to a huge degree but it helps to use the large font.I believe you are right about the copyright on the imac stuff but if facebook decide otherwise, you have to reply electronically to their challenge.If you can't provide a reference directly from the copyright owner then they remove the video.I believe this is a programmed response and no human is involved which now makes it impossible for me to get my video uploading restored.They detect added soundtrack automatically and then challenge.There are many others in the same boat and facebook will not communicate.They have various discussion sites on which I have left messages including Mark Zuckerbergs own facebook but I don't think anyone from facebook ever reads them.I intend to start a second facebook which I can use purely to get my videos uploaded as a lot of my friends enjoy them BUT don't want fall foul of their programming again.If only iMac would put something on the net to this effect.I think it is so unfair that with modern technology it is impossible to contact these large conglomerates personally and receive an email response.I tried emailing [email protected] but I got a failure notice.If you have any ideas on how to get verification from apple direct, I would be very grateful.Thank You.

Robohelp 7 Search not working when Published

Hello all;
I'm pretty new to Robohelp, and just published my first project (Robohelp 7 HTML, Webhelp Pro). We are replacing an old outdated project, and everything looks and is working fine except for the Search. When I Generate the Primary Layout and view it locally, the Search works fine. When I publish it though, I get nothing - no results at all, just a sad little statement "Sorry, we were unable to find a good answer for your question". Unfortunately I'm not sure where to turn to here - if everything works fine locally, then is there something going on with the Robohelp Server? Would re-installing the Robohelp Server do anything? Oh, and one more quirky thing that is going on - my project is called EPR eManual, and when viewed locally this is the name that appears on the Tab in IE, but once published it just says New Window instead of the project name. Don't know how to fix this either!!
Thanks for any help,
Heather

Is this limited to one help file? What happens if you publish another to the RoboHelp Server?
Do you have another Context setup in the Configuration Manager? If not, maybe you could create one and see if the same happens if you publish to it.
Failing that, you are starting to get into areas of RoboHelp Server I am less familiar with - didn't use version 7! However if you let us know how you get on, we can escalate it upwards.
The RoboColum(n)
@robocolumn
Colum McAndrew

A folder on my desktop is missing, when I search for files in the folder nothing comes up...

a folder on my desktop is missing, when I search for files that are in the folder nothing comes up! There are no items in my trash! please help!!!!

Well, now you know why you should have backed your data up. There are two kinds of computer users: those who have accidentally deleted important data in the past, and those who will do so in the future. You've just switched groups. If your data isn't backed up, it will all be lost sooner or later to boneheaded mistakes or hard drive failure. The only question is when. Good backups are cheap insurance against that day.
Now that those files have been deleted, you'll have to use data recovery software to try to salvage them, assuming the space they occupied on your hard drive hasn't yet been overwritten (a pretty good bet if they were still visible yesterday and you STOP using your computer now, to avoid overwriting them before you recover them). To do so you'll need an external hard drive and one of the following recovery utilities:
Data Rescue 3: http://www.prosofteng.com/products/data_rescue.php
FileSalvage 7: http://subrosasoft.com/OSXSoftware/index.php?main_page=product_info&products_id= 1
Both are offered in demo versions that will show you what the full version could recover before you have to pay for anything.

Search option missing from iWeb site after MobileMe transition

I'm assuming this is a residual bug from the transition to MobleMe, but I've just noticed that my site published with iWeb is missing the Search box on the home page. Just curious if anyone else has had this, or anyone has found a fix.
Tried republishing the site, but still no joy. Also tried viewing the site via the new MobleMe address as well (as opposed to old .Mac address), and it's missing there too.
Bueller? Anyone?

Strange, my friend on the latest Firefox could not see the search bar, but when I asked her to load into Safari, the webpage loaded up fine (on a Powerbook). I then tried to load up the page on Safari with my Powerbook, but no dice.
I then booted up into Windows XP and tried viewing my webpage via IE 7, Firefox 3 AND Safari, and the search bar STILL does not show up. The search bar is not limited to Mac OS X and Safari (on a Mac) right?

Some of my images do not show up (some do) when I publish a Dreamweaver document

Here's my problem: I have been working on a web site, using Dreamweaver CS6. Working on a mac with 10.6.8. The site has several pages, and several of these pages have several images each. All the images are jpgs. Some are RGB files, drawn from digital cameras. The others are grayscale files, drawn from scans from drawings.
On some pages there are no problems. But there is one page of drawings that has three tables--one table has eight cells that each have an RGB image--fine, no problem. Another table has two cells that each have a grayscale image. Also fine. The final table has eight cells that each have a grayscale image. In Dreamweaver the page looks fine, and when I "preview in browser," it looks fine. But when i publish the page, only one of the images is visible. with Safari or Firefox I can determine that there is a file there somewhere, what its name is--but they don't recognize it as an image, and in fact I get a "404" response.
I have examined the code, and can't find ANY difference ebtween the images thast work and those that don't. I have examined the images, and there are no differences among them that I can find--and there shouldn't be.
I tried just creating a new page, and had the same problem with these images.
The one image among the 8 that shows up only did that when i changed iits location in the directory--but changing the location of other files didn't work.
Any ideas? I have gone over and over the files, the code, the information about the links for hours; this is making me very crazy.

OK you need to upload these images to your remote server because they are missing from the server or that they have gone to a different folder.
http://www.elchocomining.net/double%20drawings/Florentino.jpg
http://www.elchocomining.net/double%20drawings/Mujer+matracaA.jpg
http://www.elchocomining.net/drawings%20/DJMujerarreglandocanal.jpg
http://www.elchocomining.net/drawings%20/DibujoProhibido.jpg
http://www.elchocomining.net/drawings%20/LTCocinaA.jpg
http://www.elchocomining.net/drawings%20/BbTrilladoradeArroz.jpg
http://www.elchocomining.net/drawings%20/TallerCoserA.jpg
In future always define your site correctly with all folders and file names without spaces in them. For example "drawings 20" is not a good name. You should rename it to "drawings20".
When you have corrected this especially when you have uploaded the photos again then they will appear all right on the page. after that you need to validate your pages for correct HTML and CSS but this can wait for now.
Good luck.

"Search" is missing when i publish to a folder

Similar Messages

Maybe you are looking for