Searchbar broken in v23, and problem with add on - js related?

Since upgrading to v23, the searchbar no longer functions - I can enter search terms, but the drop down appears on my second monitor, and when hitting enter, nothing happens - i.e. searching from the search bar no longer works, for any search engine installed.
Also, while it may seem like an unrelated issue, I use the Devonthink add on, in order to capture html pages from firefox directly to Devonthink Pro. After capturing the HTML page into DTP, I can than convert it to a searchable PDF.
When converting the page captured from v23, in DTP, all I get is a mirror image and a partial capture of the viewable portion of the original HTML page.
Both of these functions worked perfectly in v22, but are broken in v23. I have since downgraded to v22, and both functions work as expected, so there's clearly an issue with v23 of Firefox.

Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state '''while saving your essential information.'''
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

Similar Messages

  • Any new  about updating lion to 10.7.4 and problems  with bluetooth devices  like Bose Soundlink Bluetooth Speaker?

    Any new  about updating lion to 10.7.4 and problems  with bluetooth devices  like Bose Soundlink Bluetooth Speaker?

    Monroe
    Just in the moment i updated to lion 10.7.4  my Bose Soundlink Bluetooth  stop working as  good as it was. I´m gonna try the update in the Bose  web page. I hope  it works

  • Having a problem with Add-ons I did not install and now can't uninstall.

    Lately I have experienced problems with re-directing and other issues with Mozilla. I looked in my add-ons list and there are several things there that i did not add manually. (I have been having much trouble with ITunes and noticed a plug in in mozilla and want to know if it is necessary.) Is there a way to keep this from happening? I have been using mozilla for years and liked it when I could do a basic install without any add-ons that I did not request. Here is a list of the things that are troubling me - I am sure a few may be necessary. I would appreciate any help anyone can give me with this?
    PLUG-INS-
    Java Deployment Toolkit 6.0.200.2 NPRuntime Script Plug-in Library for Java(TM) Deploy
    Java (TM) Platform SE 6 U20 6.0.200.2 Next Generation Java Plug-in 1.6..0_20 for Mozilla Browsers
    Mozilla Default Plug In
    (THESE LAST THREE ALL CAME UP AS UNIDENTIFIED PLUG-IN ON MOZILLA PLUG IN CHECK SITE)
    Itunes Application Detector 1.0.1.1
    Itunes Detector Plug-In
    Wacom Dynamic Link Library 1.1.0.3
    Wacom Dynamic Link Library
    Windows Presentation Foundation 3.5.30729.1
    Windows presentation foundation (WPF) plug-in for Mozilla Browsers
    EXTENSIONS_ Java Console 6.0.23
    Java Console 6.0.20
    (Just curious with these two Java consoles - which by the way I am unable to uninstall - the uninstall button is grayed out. and I can only disable.)
    Really frustrated with this, I have already uninstalled Firefox and re-installed it - losing all my bookmarks and these add-ons were there after the re-install. PLEASE HELP!

    For camera problem try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      
    I do not understand what you mean about your update problem

  • Weird Problem with Add Row Button in Master Detail Page

    I have a page that was created with a Master Detail Wizard. When I click the Add Row button on our Production Environment, the row counter increments BUT no blank row shows on the screen.
    In our Development Environment, when I click the Add Row button, a blank row appears as expected. Thinking there was some problem with the production app, I exported the Dev version and imported into Production. Still no blank row.
    Thinking perhaps it had something to do with the data, I copied our production application data back into the development application tables. Still, the development app creates the blank row where the production version does not.
    I even used the same browser window for both environments and still get the same results. This was working fine in production then just stopped one day.
    The only clue I have is that the Add Row WILL work if the Master Record has no details or less than a page worth. It seems to happen when the detail records are more than one page worth. Also, when I click the Add Row button, it goes to the last page of the list (say three pages of 10, 10, 6) but no blank row shows up. Again, works fine in the development environment no matter how many pages.
    Any ideas or suggestions why this is happening? Could there be some environment setting that is causing this to happen?

    I have a page that was created with a Master Detail Wizard. When I click the Add Row button on our Production Environment, the row counter increments BUT no blank row shows on the screen.
    In our Development Environment, when I click the Add Row button, a blank row appears as expected. Thinking there was some problem with the production app, I exported the Dev version and imported into Production. Still no blank row.
    Thinking perhaps it had something to do with the data, I copied our production application data back into the development application tables. Still, the development app creates the blank row where the production version does not.
    I even used the same browser window for both environments and still get the same results. This was working fine in production then just stopped one day.
    The only clue I have is that the Add Row WILL work if the Master Record has no details or less than a page worth. It seems to happen when the detail records are more than one page worth. Also, when I click the Add Row button, it goes to the last page of the list (say three pages of 10, 10, 6) but no blank row shows up. Again, works fine in the development environment no matter how many pages.
    Any ideas or suggestions why this is happening? Could there be some environment setting that is causing this to happen?

  • Workflow and problems with labels

    Hello!
    I've been testing out some things in Edge and I've noticed a few things that I've been trying to find some documentation and information about, I would greatly appreciate any enlightenment on the following observations:
    Frame labels do not work for me - both with files created from scratch in Edge and ones made of existing HTML + CSS files. I tried the in app lesson on looping the counter and the 'Play from (loop)' doesn't work, I thought it might have been because of an error in the instructions telling users to play from a frame label that exists at the same point in the timeline where there is a 'stop' trigger but even offsetting the 'loop' label would not work. The final sample file works as intended when previewed.
    I tried a few tests with new files consisting of really basic stuff - one symbol with an 'on-click' > play from (go/start/in/one/etc) and another symbol simply animated on the x and y axis with an animation to the opacity with a stop trigger placed on the timeline and tested with the play from label placed both at the same time as the stop trigger and offset after the trigger - neither works it has no effect when clicked. (I know about what scripts to do on completion to get it to play from the start) Interestingly play from (milliseconds*) *0.125/1001/2000000 etc does work for me but this is not ideal as it is far more useful to be able to play from labels.
    Animating existing HTML - I've got a simple html page set up consisting of a container div with a number of other divs inside which I have been animating in Edge. The Edge file is set up so the container CSS overflow is hidden. Now can someone please clarify if the following method of workflow is a mistake on my part, limitation in HTML+DOM, bugs in edge or combination/none of those things?
    Workflow - bring in the html file to edge do simple animated opacity etc on the various elements start adding keyframes and labels etc - the label problems as above.  Now my intent is to have each of the div's in the container be clicked on and bring in the next one - in the same place in the viewport. I've noticed that when changing various elements visibility after tweaking animation to look good and then subsiquently setting on-off keyframes for visibility it would suddenly cause all elements lower in the DOM to move position and suddenly have what looked like keyframes for y axis position/transform? Is this bad practice to use the on-off visibility for elements? It meant that what should be a really simple and quick 10 second animation took about 3 hours to make, should we be not using the on-off keyframes for showing/hiding buttons that are in divs that sit on top of each other? Should i set up z-index values for all elements in the CSS files? (I saw a reference to you can assign z-index values in the 'elements' panel but I can only see 'arrange' - is this a different term for z-index?)
    I'm a long time user of flash, maya, after effects, digital fusion, combustion, and many other timeline based software tools - it is fairly intuitive to me picking up new systems but the issues with on-off visibility and keyframes below in the timeline really was a very frustrating workflow. I'm used to changing and editing the whole animation on the timeline seeing what works and doesn't - deleting layers, changing timings etc, i found this way of working really slow due to changes to elements position when ones above in the flow were turned on or off. Please do suggest what I should change in my approach to using edge as compared to other animation tools as it looked great on preview but I'm a bit frustrated in using the release. Is this a bug in my release?
    Where is the help and reference files for Edge? - is this screen shot it? -
    I can't find any info on basic definitions of the tools and options anywhere, and can't find much on anything to do with using edge in production with existing HTML documents, please send me some links if you have them. I've seen the edge javascript API thing but is there anything else?
    Cheers.
    Here is the approximate code of the page for reference - I actually got the file working in the end but using 'play from (miliseconds)' instead of play from (label) and much frustration slowly editing the timeline and elements visible/hidden status and redoing animation on elements below in the timeline to get them placed correctly.
    HTML:
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    <title>Master Document with base styles</title>
    <link href="css/master_styles.css" rel="stylesheet" type="text/css" />
    <!--<link href="css/ipadV.css" rel="stylesheet" media="only screen and (min-device-width:  768px) and (max-device-width: 1024px) and (orientation: portrait)" />
    <link href="css/ipadH.css" rel="stylesheet" media="only screen and (min-device-width: 768px) and (max-device-width: 1024px) and (orientation: landscape)" />
    <link href="css/iphoneV.css" rel="stylesheet" media="only screen and (min-device-width: 320px) and (max-device-width: 480px) and (orientation: portrait)" />
    <link href="css/iphoneH.css" rel="stylesheet" media="only screen and (min-device-width: 320px) and (max-device-width: 480px) and (orientation: landscape)" /> (Commented out for testing on desktop)-->
    <link rel="stylesheet" media="only screen and (min-width: 320px) and (max-width: 480px)" href="css/mobile.css" />
    <link rel="stylesheet" media="only screen and (min-width: 768px) and (max-width: 1024px)" href="css/tablet.css" />
    <link href="css/desktop.css" rel="stylesheet" media="only screen and (min-width: 1025px) and (max-width: 3000px)" />
    <style type="text/css">
    <!--
    a:visited {
        color: #00FF00;
    a:hover {
        color: #FF0000;
    a:active {
        color: #0033FF;
    -->
    </style>
    </head>
    <body>
    <div id="container">
             <!-- start Level 1-->
                <div id="mainContent">
                    <div id="mainlogo">
                    </div>
                </div>
                <div id="firstButton">
                      <div id="Abutton1">
                      <p><img src="img/a_72_off.png" width="72" height="72" /></p>
                     </div>
                </div>
                <div id="transition1">
                       <p>Wipe transition 1</p>
                </div>
                <div id="secondButton">
                        <div id="Abutton2">
                       <p><img src="img/a_72_off.png" width="72" height="72" /></p>
                       </div>
                </div>
                <div id="secondContent">
                    <div id="Abutton3">
                    <p><img src="img/a_72_off.png" width="72" height="72" /></p>
                    </div>
                <div id="text1">
                      <h1>Heading </h1>
                      <p>Byline</p>
                    </div>
                 </div>
      <div id="transition2">
        <p>Transition 2 - TBC</p>
    </div>
          <div id="thirdContent">
          <div id="lastbutton">
            <p><img src="img/end_icon_crop.png" width="150" height="150" border="0" /></p>
          </div>
          <div id="text2">
            <h1>Heading</h1>
            <p>Byline</p>
          </div>
    </div>
        <div id="transition3">
            <h4>Small print</h4>
    </div>
    </div>
    </body>
    </html>
    CSS:
    (master_styles.css)
    @charset "utf-8";
    body {
        margin: 0; /* it's good practice to zero the margin and padding of the body element to account for differing browser defaults */
        padding: 0;
        text-align: center; /* this centers the container in IE 5* browsers. The text is then set to the left aligned default in the #container selector */
        color: #19171B;
        font-family: AFBattersea;
        font-size: 100%;
    #container  { /* the main holder for all of the viewport content - an image frame */
        text-align: left;
        margin-top: 0;
        margin-right: auto;
        margin-bottom: 0;
        margin-left: auto;
    #mainContent  {
        z-index: -1;
    #firstButton {
    #transition1 {
        color: #FFF;
    #secondButton {
    #secondContent {
    #transition2 {
        color: #FFF;
        height: 100%;
    #thirdContent {
    #transition3 {
        color: #FFF;
    #mainlogo {
        background-repeat: no-repeat;
        background-position: center center;
        background-image: url(../img/960_off.png);
    #Abutton1 {
    #Abutton2 {
    #Abutton3 {
    #text1 {
    #text2 {
    #lastbutton {
    #text3 {
    (desktop.css) - I've not included the other css files referenced in the media queries as they only contain names of elements for this purpose
    @charset "utf-8";
    #container  { /* the main holder for all of the viewport content - an image frame */
        text-align: center;
        margin-top: 0;
        margin-right: auto;
        margin-bottom: 0;
        margin-left: auto;
        height: 700px;
        width: 1024px;
    .mainContent  {
        height: 100%;
    #firstButton {
        height: 100%;
    #transition1 {
        height: 100%;
    #secondButton {
        height: 100%;
    #secondContent {
        height: 100%;
    #transition2 {
        height: 100%;
    #thirdContent {
        height: 100%;
    #transition3 {
        height: 100%;
    #mainlogo {
        background-image: url(../img/960_off.png);
        height: 72px;
        width: 960px;
        margin-top: 364px;
        margin-right: 36px;
        margin-left: 36px;
    #Abutton1 {
        height: 72px;
        width: 72px;
        margin-top: 364px;
        margin-right: auto;
        margin-left: auto;
    #Abutton2 {
        height: 72px;
        width: 72px;
        margin-top: 364px;
        margin-right: auto;
        margin-left: auto;
    #Abutton3 {
        height: 72px;
        width: 72px;
        margin-top: 364px;
        margin-right: auto;
        margin-left: auto;
    #text1 {
        text-align: left;
        margin-top: 16px;
        margin-left: 320px;
    #text2 {
        text-align: left;
        margin-top: 16px;
        margin-right: 330px;
        margin-left: 360px;
    #text3 {
        text-align: center;
        text-indent: -192px;
        width: 320px;
    #lastbutton {
        margin-top: 364px;
        margin-right: auto;
        margin-left: auto;
        height: 150px;
        width: 150px;

    Hi,
    I wonder if it's related to the multilingual capability of BPM Object presentations.
    Could you:
    1. right mouse click the project in the Project Navigator tab.
    2. click "Project Preferences"
    3. click "Languages"
    Do you see multiple languages? Is English (or whatever language you're using inside Studio) the default?
    When you log into the WorkSpace, could you double check the language you are using (log in -> click "Settings" in the upper right corner) -> with the "Display" tab selected, is the language you chose as the default in Studio selected?
    I suspect the reason you see some but not all of the labels is because you have defined some of those labels in the language selected in the Workspace. You can add the addtional labels for the various languages you want to support if you:
    1. Open a presentation
    2. Click one of the labels
    3. In the properties tab on the right, click the field beside the "Display" property
    4. Click the button with the "..." on the right side of this field
    Hope this helps,
    Dan

  • Exchange 2010 : Doubt with recipient type and problem with disappearance of the original recipient in the mail relay

    Hello. First of all, thank you very much for your attention.
    After that, I will expose the problem:
    I have a user domain called "comercial" with a corresponding mailbox "[email protected]"
    . This user
    has assigned multiple emails such as "[email protected]", "[email protected]", "[email protected]" , having as default   email "[email protected] ".
    On
    the other hand,
    another domain user
    called
    "menganito" with it's mailbox  "[email protected]" account, also has a few mail accounts "[email protected]", "[email protected]", " [email protected]"
    ...having
    as default   email "[email protected]
    The user "Comercial" is forwarding
    all of it's mails to the user "menganito".
    The problem is that "menganito" is not receiving the exact
    "comercial"
    sender email, but the email which appears by default ("[email protected]").
    "Menganito" would like to know
    from which email exactly the mails he is receiving have been sent ("[email protected]",
    or "[email protected]"
    or "[email protected]"). 
    Also, he would like to knowthe email of the original sender (from the outside of the domain) whom the user "Comercial"
    have received the email from.
    In another type of email servers (Kerio,...)
    this is not a problem, because forwarding by
    defaultis always showing
    the original sender and original receiver.
    Maybe the problem comes from the recipient type I'm using.
    Should I use another type of recipient? should I use a transport rule?
    Any idea ? Thanks again in advance.

    Hi Simon. First of all thanks for your answer.
    This happens with all accounts. I tried with news accounts and different browsers for OWA and Outlook anywhere and happens the same. Is not a cache problem
    The problem is
    when "[email protected]"(default
    and set as default answer
    account by
    exchange)
    receives
    a message in  "[email protected]" when
    forwards to "Menganito"
    this message will appear from"[email protected]"
    instead of "[email protected]".
    This happens with all accounts.
    I can understand that i can't avoid
    default reply address on the same
    domain, but also with different domains happens
    the same?
    The platform is only one clean and updated server 2012 as dc and another clean and updated server 2012 with exchange 2010 sp3 directly and after rollup 4 for exchange SP3, no previous versions and servicepacks of exchange 2010 was installed before. Before
    install exchange 2010 sp3, i installed all the filterpacks (3) and .net 3.5 and all updates that i finded for 2012 server (i tried for 2 days): No more updates for sure.  After, in powershell, i put this:
    Add-WindowsFeature NET-Framework-Core,RSAT-ADDS,Web-Server,Web-Basic-Auth,Web-Windows-Auth,Web-Metabase,Web-Net-Ext,Web-Lgcy-Mgmt-Console,WAS-Process-Model,Web-Mgmt-Tools,Web-ISAPI-Ext,Web-Digest-Auth,Web-Dyn-Compression,NET-HTTP-Activation,Web-Asp-Net,Web-Client-Auth,Web-Dir-Browsing,Web-Http-Errors,Web-Http-Logging,Web-Http-Redirect,Web-Http-Tracing,Web-ISAPI-Filter,Web-Request-Monitor,Web-Static-Content,Web-WMI,RPC-Over-HTTP-Proxy
    -Restart
    The machine and exchange works good (i3 with 4gb ram, and raid 1 1tb of HD) and the organization only has 15 mailboxes. No problems with even viewer and all is correct.
    Thanks again.

  • Why is Firefox having problems with add-ons since I upgraded to 3.6.9?

    Firefox upgraded it self today to the latest version 3.6.9 and now my add-ons don't start. I can still see them in the Tools>Add-ons>Extensions window. But they are not running. I have allready tried to delete the extensions.ini, extensions.rdf and extensions.cache files but it didn't help. And if I click on any of the Option buttons in the Add-ons window it just freezes. Firefox keeps runing and seemes unafected but the Add-ons window doesn't respond any more. I can't close it and it even stayes open after I close Firefox.

    cor-el, thank you for your reply.
    I tried disabling all add-ons and resetting all user preferences but it didn't fix the problem. So I tried your second recommendation. And when I booted Firefox with the new Profile everything was OK. I added my add-ons and they worked great. The only problem was that if I closed Firefox the new profile I created disappeared. The old, corrupt profile was still there but the new one wasn't. In the end I even deleted the old, default profile. This only made the matter worse. Every newely created profile would still disapeare if I closed Firefox and without a profile Firefox wouldn't start, saying that it is already running in the background and that I should stop the process or reboot my PC. Needless to say there was no firefox.exe process running in the background and even rebooting wouldn't make Firefox start. Well not knowing what to do next I did a compete uninstall of Firefox, rebooted my PC and installed a fresh copy of Firefox 3.6.9. I imported my bookmarks and added my add-ons and (for now) everything works as it should.
    Thank you again for your effort.

  • Zen Extra -problem with "add to Play " but

    Hi
    I have a creative Zen Xtra, bought it just a week ago, and liked it a lot, (Except the size ...)
    but i think i am having a problem with it. If I have to create a play list, while I am playing songs how to do it ?
    Lets say i am playing song aa from album AA
    i click on AA , and the select song aa and click on Play now it starts playing but now i want to add it to playlist , then i click on aa and in the menu that comes up i click on "Add to Play" but as soon as i click on the "black roller while) to select "add to play" I can see the selection on the previous menu (song aa ) moves to next line..
    Same thing happens if I have to add Album AA to play list, the cursor on the previous manu shifts one position below,
    And the song/alblum is never added to the play list.
    Do i have to do it only using PC ?
    that sucks ..
    let me know

    avoodi wrote:
    Hi I have a creative Zen Xtra, bought it just a week ago, and liked it a lot, (Except the size ...) but i think i am having a problem with it. If I have to create a play list, while I am playing songs how to do it ?Lets say i am playing song aa from album AA i click on AA , and the select song aa and click on Play now it starts playing but now i want to add it to playlist , then i click on aa and in the menu that comes up i click on "Add to Play" but as soon as i click on the "black roller while) to select "add to play" I can see the selection on the previous menu (song aa ) moves to next line.. Same thing happens if I have to add Album AA to play list, the cursor on the previous manu shifts one position below, And the song/alblum is never added to the play list.Do i have to do it only using PC ?that sucks .. let me know
    Basically whenever you make a playlist, it includes whatever is in your "selected music". So let's say you want to add an album to an existing playlist. Go into your media library, add your playlist ("Add to play"). Then add the album you want from the media library (also doing the "add to play" option). When you go into the "selected music" section, click in on the scroll wheel and "save as playlist"

  • Using Tiger 10.4.7 with AD 2003 and problems with rq'd Password Change

    I have been able to successfully change my password 4-5 times before in my scenario using Tiger v-.2->.6 and have never had a problems.
    Now I just changed my old expired password, as req'd from the AD policy, to my new Password on my XP box and have a Mobile account on my Powerbook that won't let me in now using my new Password. It says I am unable to use this <name> account at this time. Is there a propogation time to pass?
    Local Admin account on PB can sign in fine- My alternate Systems Admin account <mobile> can sign in as well fine. Other local accounts work well as well.
    As a mobile account I cannot change my password without being connected to the AD network at this point (no access through local System Prefs). Has anyone ever experienced this? Or is everyone still shying away from Mobile accounts usage and Homesync (Works great on my machine - problems with other accounts/computers)- I'm sort of a Mac/AD Daredevil here in XP-land, since we only really support Macs because our CEO won't (refuses to) use XP and I am a Jedi Knight inside the Dark Star (Just learning XP/AD to get steady work).
    Anyone out there have anything to add/suggest? THX

    The admonition not to use the Tiger install disk utility only applies to repairing permissions. You can use Disk Utility from the install disk for verifying and repairing your hard drives. However, with Tiger, you can now verify your boot drive with Disk Utility from your boot drive itself (this only works if you have disk journaling turned on and it's on by default). If the drive would need any repairs then you would have to boot from the installation disk to repair it.
    Disk Warrior is probably the best hard drive maintenance utility in the entire Macintosh universe and it works fine with Tiger. Just make sure you have the latest version which is 3.0.3 I believe.
    In my opinion the iLife suite of programs is absolutely essential for the complete Macintosh/OS X experience. There's nothing like it on any other platform, period. It's a true work of excellence.
    You will enjoy the stability and compatibility of Tiger especially when on the Internet. The latest version of Safari is the best yet.
    Dual 2.5GHz G5 Power Macintosh   Mac OS X (10.4.7)   1.5GB RAM 20" Apple Cinema Display

  • Y510p and problem with Update Nvidia Driver

    Hi everyonei have problem with updating my y510p lenovo laptop nvidia driver ,my current nvidia driver version is 327.62 which i download from lenovo website,Now for better performance in new games like gta v and witcher3 ,i decide to updating nvidia driver,first remove my nvidia graphic driver from add or remove then download nvidia ver 350 from nvidia official web site , which nvidia website confirm it support my graphic card which is Gt755m , then i install new ver and during install i check clean install , after successful install , restart laptop , then there was problem . when i try to open nvidia control panel it wont running and an error showed up and said "You are not currently using a display attached to an NVIDIA GPU" .i try to open a game , game running in really low fps and i find out game run on hd graphic of my laptop and my nvidia graphic wont run .The only way to repair was i install my last nvidia driver 327.62 and run a system restore .guys what is your suggestion and how i can update my y510p nvidia driver ?Thanks   

    Hi Y510Man,
         The video graphics installation order is important. You need to install the Intel Graphics first, and then do the Nvidia. IIRC you should un-install the Nvidia driver, then re-install (or upgrade) the Intel HD Graphics driver. Reboot, and install the new Nvidia driver.
         I don't know why, but every time I upgraded my Y470 Nvidia driver, I had to use this procedure. First install, or re-install, the Intel driver, then install the Nvidia. You can't just upgrade the Nvidia driver without a re-install of the Intel. I think it has to do with the Optimus setting, and the automatic switching.
        Let us know how it goes.
    Cheers
    DragonRider

  • Having problems with add ons.

    It seems that my add ons are enabled,but they are not working.
    == installed mozilla

    cor-el, thank you for your reply.
    I tried disabling all add-ons and resetting all user preferences but it didn't fix the problem. So I tried your second recommendation. And when I booted Firefox with the new Profile everything was OK. I added my add-ons and they worked great. The only problem was that if I closed Firefox the new profile I created disappeared. The old, corrupt profile was still there but the new one wasn't. In the end I even deleted the old, default profile. This only made the matter worse. Every newely created profile would still disapeare if I closed Firefox and without a profile Firefox wouldn't start, saying that it is already running in the background and that I should stop the process or reboot my PC. Needless to say there was no firefox.exe process running in the background and even rebooting wouldn't make Firefox start. Well not knowing what to do next I did a compete uninstall of Firefox, rebooted my PC and installed a fresh copy of Firefox 3.6.9. I imported my bookmarks and added my add-ons and (for now) everything works as it should.
    Thank you again for your effort.

  • Problems with add-ons....

    Hello everyone....
    We have used ZENWorks imaging for years. We always just got one computer the
    way we liked it and then we took an image of it. Then we just took that
    image and used it on every other computer of that model we had.
    Periodically, we would update the image with the latest patches and
    application updates and take a new image.
    That worked great until about 4 months ago....
    Suddenly, after updating the image and then putting it on a different
    computer, Windows would blow up. It looked like the image wasn't as big as I
    would have expected it. I contacted Novell and they told me that my images
    were too large.
    Their suggestion was to create a base image and then use add-on images to
    make updates from the base..
    The problem is that the add-ons don't seem to work. Near as I can tell, I
    should put the base image on and create an add-on images from an existing
    NAL application for the installation of the updates. But that is not working
    for me. I have a NAL app to run the setup.exe for Office 2010 and I created
    the image file from it. When I try to add it in nothing happens.
    Is it not working because I am using the NAL app to run the setup instead of
    using AdminStudio to track the changes that the installation of Office 2010
    does when the product is installed?
    Your thoughts??
    Thanks.
    Delon E. Weuve
    Senior Network Engineer
    Office of Auditor of State
    State of Iowa
    United States of America

    Delon,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

  • K7T266 PRO2-RU and Problem with a FEW DISPLAY ADAPTERS ...

    Hello ,
    I was using my mainboard with 32 MB Creative Riva TNT2 Ultra until creative's fan was damaged . I tried 16 Creative TNT2 m64 display adapter of a friend of me , but it didn't work with K7T266 PRO2-RU. Many sounds are coming from mainboard while D-LED shows Testing RTC (or boot attemp, I'm not sure about that) (Same symptoms with "no graphic adapter" - I tried again after unplugged the display adapter - )
    At the beginning I was thinking that the 16 MB creative graph adap. was broken . So , today I bought a new graphic adapter 128 MB of Creative 3d Blaster5 Radeon 9200SE . When I plugged it into mainboard , I saw the same problems with 16 MB Creative TNT2 m64 . After that , I found another 32 MB Creative TNT2 Ultra from my friend and it worked with my mainboard FINE .
    - I tried all of the old bioses of MSI K7T266 PRO2-RU
    - I tried to start the computer with no any other devices (such as HDD , sound card , tv card etc. ) . Only display adapter was plugged in the mainboard , but it didn't work . System hanged up everytime I tried .
    - I made some bios adjustments which are suggested at this forum ....
      But none of these worked ....  ?(
    What is the problem ? Why only 32 MB creative TNT2 Ultra is working with my mainboard , but 16 MB Creative TNT2 M64 and 128 MB Creative 3DBlaster5 Radeon 9200SE are not  while all of them are working FINE with an old PII mainboard . (tvout+DVI)  I'm looking forward to hear from you . , Help me please .
    Ps : Can new beta bios solve that problem ?
    XP pro
    2100+ 0.18m XP CPU with coolermaster CP5
    40 GB Seagate Barracuda IV
    300 watt Codegen Power Supply
    2*256 MB Kingston DDR 2100 Memory
    ( No floppy , no souncard , no tv card etc , no any other devices like cdrom , dvdrom , cdrw etc.)

    That's it!
    I provided a few PSU's from my friends and tried 420 watt thermaltake and 520 watt VANTEC Stealth 520A PSU  ...
    Same situation happened and 128 MB Creative ATI Radeon video card didn't work   ...
    The problem can not be about PSU ...
    I tried two different brand of fx 5200  (128 MB ) video card on my system (with 300 watt codegen PSU) . Everything is ok  .
    And I also tried the RADEON card on my friend's computer which is running with 230 watt Elan Vital PSU . It worked perfectly ...
    So what can I think about that situation?
    The Answer is : There is something about MSI mainboard ... When I wanted to contact with support center via e-mail , I got an automated e-mail answer which is not completely able to solve any of my problems.
    Besides , I saw the problems between brand new Nforce mainboard of MSI and ATI video cards ...
    SO , if we get all of these informations together , we can say "THERE IS SOMETHING ABOUT MSI" ...
    The solution is not buying expensive PSUs...
    That's really bullshit , I can buy a brand new mainboard instead of an expensive PSU.
    Finally , I bought an Asus mainboard , everthing is going ok now!
    I'll not buy products of MSI anymore because they didn't do anything to solve my problem . Goodbye MSIIIIII ....................................... ........

  • P35Neo2 FIR and problem with booting

    So I have problem with booting my compie. Compie try to boot to the part of start windows, after that in case of switch into graphicis mobo going down and restarting (WinXP SP3). I think, that problem is not in PSU, cos i have 800W XILENCE (+3,3V 28A, +5V 32A, 4x+12V 20A, -12V 0,5A, 5VSB 3A), Board P35 Neo2 FIR, E7200 proc, bios 1.9 (updated). I have 5 disk and use raid function in bios. Graphic Radeon HD3650, Memory Zeppelin 4x1GB KIT 800Mhz.
    I start with change of PSU from 550W to 800W but it didnt work, previus PSU had (+3,3V 30A, +5V 32A, 2x+12V 18A, -12V 0,8A, 5VSB 3A),
    i try change memory, but no efect.
    After update bios there was standard warning about bad cheksum, after resave Bios settings it was gone, and compie boot after that.
    Any idea?
    Thanks

    So my problem is solved...but my feeling of this is not good...
    I updated BIOS from 1.9 to 1.10, reset Bios settings, after restart i pressed F2 for load standart settings and i changed in Bios only that i am using RAID and disable disket and it works...i boot my compie into windows without any problem...
    So i try change another things in Bios and my compie hangs in continous resets without booting into windows...no BSOD only restart and restart...
    After reseting Bios settings and again Load to Default it works...and run windows...
    There was only one new thing ... screen flick for the second with new screen about checking NVRAM ....this screen was not visible before (and maybe this is the problem), cos if i change something in BIOS about clocking and power management and other ones, this screen is by booting missing...and compie not run in Windows...
    Next thing what i see, that in CPU multiplication dont work multiplication 9,5 and proc used frequency 2400 (9x) (it is E7200 on 2533)
    i hope that this bios 1.10 fixed my problems...and my opinion is that P35 Neo 2 FIR is not ideal board for E7200 proc...so i m looking for another proc...and maybe another board...

  • Choosing between external and partner application and problem with login

    We have an application on Oracle App Server 10.1.3.3 and we have an OID server.
    I had taken this for granted that I should define the application as 'Partner Application' and not external application for single sign on.
    Now that we need the 'PASSWORD' retrieved by application, we are considering defining it as an external application.
    There are at least two problems I have encountered defining the application as external:
    1. 'pageConfig:serverDate' is among the login form's inputs in the login page, but I can't set it in orasso 'Edit External Applications' page
    2. After login using SSO as external application and when I click on the application's new link, the login page is shown with the username and password field filled, but I have to click on login button anyway (no automatic and invisible login).
    I will be very grateful if someone gives a general view on the differences between external and partner, whether in this case external has to be used or partner and finally give some comment on my specific problem with login button and manual login.
    Thank you

    Just some information :
    - The problem with LOGIN page exists. I don't have that problem with for example GMAIL when defined as external application, but with my applications in Oracle Application Server.
    - There is also another thing I don't understand. The link to external application is something like:
    javascript:open_jwindow('../ealogin?ID=76D4766','76');
    and couldn't be executed outside pls/orasso
    in other words we can't give that to our users, can we? They should login to orassso and see that?
    We don't want to involve them in Identity Management...
    Any help is appreciated....
    Regards

Maybe you are looking for

  • Creation of materialized view with view log file for fast refresh in 10.1db

    Hi,.. I have a select statements that includes data from almost 20 tables and takes long time to complete..I am planing to create a materialized view on this.. would you please suggest best way of doing this? we would like to have materialized view a

  • Updating Adobe Application Manager updates fail!

    Since i updated the Adobe Application Manager to version 6.2.112.0 i experience failures when updating programms!! Everytime i get these kind of messages: Photoshop 13.0.1-update voor Photoshop CS6 en Photoshop CS6 Extended Update is niet van toepass

  • How to decrease line width in table in smartforms

    hi i want to decrease line widht in tabel in smartforms. how can i do. thanks.

  • How to Uninstall Lightroom for Mac

    I just upgraded to Version 2, I want to uninstall version 1 without effecting V.2, Ive looked everywhere for the uninstaller, to no avail.

  • Passwork for website - how?

    I am attempting to set a password on a site, but when following the help files for protecting a site with a password, I do not find the Privacy section of the Site Publishing Settings (v3.0.4)  Can anyone assist me?