Searching article about using the trex crawler to crawle the SAP help ...

.. and show the results within own portal.
Hello,
I was reading an article on how to use TREX with the SAP help. Unfortunately I cannot find the article again. Does someone know this article and would be able to give me the adress?
Thx, Vanessa

OK, so I've figured out the syntax or querying the key field. The criteria looks something like this:
criteria='key:"D:\\Inetpub\\FoldererName\\FolderName\\FolderName\\Create_View_Delete_Calen dar_Groups.doc"'
*note that every '\' has been escaped to '\\'
Now say, I want to add additional criteria like documents that contain the word office, the criteria looks like this:
criteria='""key:"D:\\Inetpub\\FoldererName\\FolderName\\FolderName\\Create_View_Delete_Cal endar_Groups.doc""" AND "+office"'\
What I really want to do though is limit the search do docments in a specific folder, something like
criteria='key:"D:\\Inetpub\\FoldererName\\FolderName\\FolderName\\*"'
I can't seem to get this to work. I've read other posting saying wildcard searches need to be in lower case, and I've used lcase() around the string to force this, but still nothing is returned.
It's probalby a syntax issue, but I tried lots of variation with no success.

Similar Messages

Where can I find information about using the Mozilla Help web pages?

Such as tips to make searching the help pages faster like adding symbols + or - or " which some internet search systems use.
There is simply too much information offered for me ( a neurologically disabled person - specifically with working memory difficulties [dyslexia, dyspraxia/DCD] ) and all one can do is write yet another new question - which will probably be a repeat of what has been asked before in a different way and increase the already existing mass of information for the next enquirer to 'wade; through!
The consequence of not knowing where to look for information, is that I just bumble along and never become as proficient using Firefox (and the web and my computer) as might be possible if I had a really good teacher giving personal one to one guidance matching my knowledge gained so far and skill potential.

Hi Andrew
The main introduction to Firefox are these articles
* https://www.mozilla.org/en-US/firefox/tour/ (it is interactive click to see what happens)
** https://www.mozilla.org/en-US/firefox/desktop/
* [[Get started with Firefox - An overview of the main features]] a long article with plenty of pictures and short video clips
This is a listing of your previous questions on this forum
* https://support.mozilla.org/en-US/search?a=1&asked_by=TolknyAgain&sortby=1&w=2
*Generally for anyone who is signed in to the forum their own questions are seen [https://support.mozilla.org/en-US/questions/all?owner=mine&show=all here] ( [https://support.mozilla.org/en-US/questions/firefox?owner=mine&show=all or] firefox only)
We do not give general computer help here, but some links that may help you.
The default search engine used by most versions of Firefox is Google these are some useful help pages
* [https://support.google.com/websearch/?hl=en#topic=3180167 Welcome to the Search Help Center]
** [https://support.google.com/websearch/answer/136861 Search operators] Note a dash maybe used to exclude a word
**https://support.google.com/websearch/answer/2466433 [ Punctuation and symbols in search]
* The '''easy way''' just use http://www.google.com/advanced_search
If you find something useful remember to bookmark it, and that Firefox is good at finding things you have already visited
* [[How to use bookmarks to save and organize your favorite websites]]
* [[Awesome Bar - Find your bookmarks, history and tabs when you type in the address bar]]
Post back in this thread again if you have further questions about Firefox use or our help articles.
We may not be able to give one to one teaching but we can try to answer questions about Firefox.
Possibly consider using Firefox on wikipedia and the Khan Academy to learn more yourself.
This is very simple you have probably already progressed past this but serves as examples
Some helpful terms
* [https://simple.wikipedia.org/wiki/Web_browser Browser] <-- clickable link - often blue in colour <br /> More detail https://en.wikipedia.org/wiki/Web_browser
* [https://simple.wikipedia.org/wiki/Hyperlink Link] <-- link <br />https://en.wikipedia.org/wiki/Hyperlink <-- different article
* [https://simple.wikipedia.org/wiki/Search_engine Search Engine] <br />https://en.wikipedia.org/wiki/Web_search_engine
* [https://simple.wikipedia.org/wiki/World_Wide_Web World Wide Web] vs [https://simple.wikipedia.org/wiki/Internet Internet]
**I will leave it as an exercise for you to look up the ordinary English versions of ''www'' & ''Internet'' in en.wikipedia.org
** Note the linked articles are themselves full of links.
* http://en.wikipedia.org/wiki/Khan_academy -> https://www.khanacademy.org/ <br /> Includes subjects from basic arithmetic to computer programming

Sometimes when using the Google search engine, after using the Back button in the Firefox 4.0.1 browser, I am no longer able to click in the Google search box.

Sometimes when using the Google search engine, after using the Back button in the Firefox 4.0.1 browser, I am no longer able to click in the Google search box.
This problems has been occurring on two different machines over the last two days.

I think this may not be a browser problem but rather a Google problem.
I am getting the same problem with the Google Chrome browser.

Search help for Web Dynpro using the SAP-search help

Hi,
Im trying to create a generic search help for Web Dynpro using the SAP-search help. It should working so, that I construct a Web Dynpro-component, that gets the data of the search help from the SAP-system, interpreted it and creates the ui-elements and the needed context generic.
The mapping between the Input field of the customerview and the right search help is to be made with an xml-file, which contains the information: name of the view, the input field, the search-help-name and the name of the field that will be returned.
The xml-file is reading from a helper-class. That helper-class contains any information, witch need the search help-component as well as the customer-component.
The initialization takes place in the method wdDoModify of the customer. The call of the search help from the customer should be implement with an Action, witch is bound to a Button(create dynamic in the helper-class behind the input field).
In a second foot should be create a plugin for eclipse, witch insert the used files (search help component, helper class, ) in the project. In addition it should create the call in the customer generic.
It would be great if someone can give me a feedback!

Hi Mike,
The BlanketAgreement.exe is a reference to the executable that will be created when you compile the solution you created in Part II - Part III. I think there is a mistake in the tutorial because it asks you to name the project 'Blanket' which means that by default the executable will be called Blanket.exe and not BlanketAgreement.exe. The tutorial also misses the step asking you to compile the Blanket project before you go on to create an installer. You should compile your Blanket project in Release mode before creating an installer. By compiling the project you'll get a Blanket.exe file in the bin folder of your Blanket project which you then need to add to the installer per the instructions.
SAP do offer development courses in some areas and there is training material here on the SDN and on the SAP partner portal (and maybe the customer portal as well). Try searching this forum for 'training' or 'tutorial' and you should get a few links. There's also a development certification.
Personally I'd recommend you give yourself a little project to work on and just get stuck in
Kind Regards,
Owen

I also need information about use the ProConnect(r) Integ...

I also need information about use the ProConnect(r) Integrated KVM 2-Port Switch to connect a Mac G4 and a PC anyone help
software reviews editor

I suggest you to go to linksys website & it will give all required information ,,,
Or you can try this link ....

I would like to learn more about using the Adobe Digital Publishing Suite.

I would like to learn more about using the Adobe Digital Publishing Suite. I really don't know much about it nor do I know anyone who uses it yet. Is it specifically for creating apps for tablets? What about smart phones? We sometimes produce PDF publications that are posted to our website. Can DPS be used to produce more interactive online publications? What is a .folio application? What platforms are .folio apps used on?

DPS currently supports iPads, iPhones, and Large and XLarge Android devices. You can start here to get basic information and watch a few videos:
http://help.adobe.com/en_US/digitalpubsuite/using/WS67cb9e293e2f1f60174dc2eb12f2ca67c28-80 00.html
If you have an iPad or other mobile device, you can download and play with any of these apps created with DPS tools:
http://blogs.adobe.com/digitalpublishinggallery

Access BAPIs Using the SAP Java Resource Adapter

Hi experts,
Can someone tell me how to Access BAPIs Using the SAP Java Resource Adapter?

hi Shweta,
Please refer the step by step procedure:
1. Start the deploy tool of the SAP J2EE Application Server with the DeployTool.bat in the directory //<SAP J2EE Engine Installation Directory/.../j2ee/deploying.
2. Choose Project → New Project and enter a name for the new project.
3. Click on the Deployer tab.
4. From the menu path, choose Deploy → EAR → Load Module and select the sapjra.rar file.
5. For the newly created node sapjra.rar, choose Server Settings → Identity Subjects and select Caller Impersonation as authentication type, so that the J2EE user data is used to log on to the ABAP system.
6. Make sure that the J2EE Application Server is running. Connect to the J2EE Application Server with Deploy → Connect.
7. Deploy the sapjra.rar using the menu Deploy → Deployment → Deploy Module.
8. Enter SAPJRADemo as application name and start the application.
9. Close the deploy tool.
10. Start the Visual Administrator again.
11. Select the Cluster tab and switch to <Server Node> → Services → Connector Container.
12. Click on the Runtime tab and choose sap.com/SAPJRADemo → eis/SAPJRADemoFactory.
13. Choose Managed Connection Factory → Properties. On this page, you need to specify the logon data for the ABAP system. There is already some dummy data visible in the property list if no real system data has been specified so far.
14. To change the value of a property, select the property in the list, change the value underneath it, and add the changes using the Add button. At the end, do not forget to save all changes by pressing the button Save Changes. The user configured for the SAP JRA must be the user authorized to read metadata of function modules.

Installing oracle on Linux using the SAP version of oracle software

Hello All,
I am trying to install 32bit oracle software on Linux 32 bit os using the SAP version of Oracle Install Software downloaded from marketplace. I have downloaded the required exe and rar files and unpacked them on my PC. The unpacked folder is uploaded in bin mode to the respective server under a common mountpoint. In the folder i have 4 .SAR files with other label files etc. I want to unarchive these .SAR files to get the runInstaller but running in to issues.
Here are the steps I tried:
1. I copied the SAPCAR exe from exe directory and tried to unpack the 4 .SAR files but got permission error. All these 4 .SAR files are owned by ora<sid> user id. I tried to do all these under root user still it fails.
ora<sid>@xxxyysapdbXX:/sapdata//Oracle32/51031674> SAPCAR -xvf OR110232.SAR
-bash: ./SAPCAR: cannot execute binary file
what am i missing?
Any help is greatly appreciated.

If you have a 32bit OS then you need to use the 32bit binaries of SAPCAR - yes.
And:
Usually those SAR files are unpacked by the installation program sapinst, why do you unpack them manually?
Markus

SBO - Using the SAP supplied AIO_Material_Master template - Extend Material

Hoping someone can help here.
I am using Using the SAP supplied AIO_Material_Master template. I have read the DataMigration_8_Material_EN_US.doc and could not find anything. How can we extend our Material accross all Plants? What are your suggestions?
Cheers,

Not sure if I fully understand as I am new to SBO.
I have created a plant table also within the plant table I have created columns for the different views that would be created under each plant for that Material.
So I am thinking I need to start at the MaterialMasterHeader_E1BPE1MATHEADER_Required.
How should I do this. I was thinking maybe placing everything in a While Loop(???). But not exactly sure how. If I map to this table?? how do I flow through all of the dataflows?

I downloaded the latest Adobe Reader when prompted. Since then I cannot use Safari File Print to print web pages - the printer dialogue window opens but the page is blank. Also, when I try to use the safari Help button,the dialogue box is blank.

I downloaded the latest Adobe Reader update when prompted. Since then I cannot use Safari>File>Print to print web pages - the printer dialogue window opens, but the page remains blank. Also when I try to use the Safari Help button, the dialogue box opens but remains infuriatingly blank. Can anyone help me to solve this problem?

Back up all data.
Quit Safari. In the Finder, select Go ▹ Go to Folder from the menu bar, or press the key combination shift-command-G. Copy the line of text below into the box that opens, and press return:
/Library/Internet Plug-ins
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then launch Safari and test.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Where can I find information about using the measurement tool and log?

Am try to use the measurement tool to measure perspective plain; any ideas?

No one can remotely have "any ideas" to help you when you don't even mention what your problem is nor what your system and workflow are like.
Of course, when you post here,one assumes you have done your due diligence, read the documentation, the user guide, the Help files in the Photoshop Help menu, as well as done Google and forum searches, etc, and we would expect some sensible, detailed information from you.
Teaching someone Photoshop from scratch, step by step, exceeds the scope of this forum—or any other forum.
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Advice about using the laptop with closed lid while connected to external display

Hello all HP forum members!
I have an ENVY 17 with Win8.1 64bit, a great laptop, but I need an advice about using it while connected via HDMI cable to an external display (TV).
When I play heavy 3D games, the computer produces more heat than usual (of course this is normal), but doing so with closed lid, could this harm the display in some way, as a result of the heat?
Thanks!

Hi @VVel ,
Thank you for visiting the HP Support Forums and Welcome. It is a great site for information and questions. I have looked into your issue about your HP ENVY 17 Notebook and issue with keeping the Notebook on while closing the lid. Here is a document on changing the Power option.
Control Panel - Power Options - upper left - Choose what closing the lid does.
Change Plan Settings and also check Advanced Settings. Make sure you do this for both battery and power.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

A few tips about using the Text Panel

A recent question about the text panel set me to working with it and I thought I'd share some tips I discovered, since the help files don't explain the text panel at all.
At one time I called the text panel "useless", but I've changed my mind -- it's a nice thing to have. Essentially it's a quick way to instantaneously
Create a new layer with a semi-transparent layer style.
Create a rectangular shape on that layer.
Add a drop shadow effect to that shape.
All with a double-click!
You access the text panel from the "Effects" panel and its "Photo Effects" icon, choosing the "Frame" effect:
Double-clicking on it creates the layer and the shape. By default, the text panel layer has a semi-transparent layer style applied to it and this has caused great grief for those who want a completely opaque background behind some text. Not to worry, that's easily done. To whet your appetite, here are a few effects that can be achieved with the text panel:
Let's start with the "Big text" box:
Create the text panel.
Because we want an opaque panel, right-click on the shape in the Editor and select "Clear layer style". POOF! Instantly you've got an opaque white shape with no drop shadow.
Move and resize the panel. (It's still horizontal at this point.)
Add some text (which will come in on its own layer).
Size and position the text relative to the shape, and when you're satisfied, select both the shape layer and the text layer (using the Ctrl key) in the Layers panel and click on the "Link layers" icon at the bottom of the Layers panel. This links the shape and text so they can be moved and rotated as one. The layers wind up looking like this:
Now, let's look at the "small text" box:
Create the text panel.
Position the panel and add and position some text as before.
Because we want the text panel to be a dark grey (instead of the default white), with the text panel layer selected, select the "Create new fill or adjustment layer" icon at the bottom of the Layers panel and select "Hue/Saturation...". Be sure to use the "Clip to layer" icon, and lower the "Lightness" value:
This gives the nice transparent grey background so the white text shows up very well, even against the bright white of the clouds.
Select all three of the layers and link them together:
Finally, you can have some fun with the "Fancy" effects:
Create the text panel.
Position the panel, add some text, and set their positions.
Add a "Hue/Saturation" adjustment layer as before (clipping it to the text panel shape layer).
Colorize the text panel by using these settings:
5. Don't forget to link the layers together:
6. Double-click on the "fx" icon to the right of the text panel shape layer, which will bring up the "Layer effects" dialog box. Here you can create the bevel and adjust the size and transparency of the drop shadow.
You can also get this nice faded effect on the text panel:
After following the steps listed above, add a mask layer to the text panel shape layer and draw a gradient fill on that mask layer to fade the layer. I used a linear fill going from white to a dark gray because I wanted some of the text panel to always be showing:
N.B.: Make sure you always clip the "Hue/Saturation" adjustment layer to the text panel shape layer so that the H/S adjustments only affect the text panel.
That's it! Enjoy!
Ken

Yes nice job.
Thanks for posting this.
MTSTUNER

How to change the search provider when using the Firefox Home Button Search feature?

In Firefox itself I have configured duckduckgo as my default search provider.
But when I use the Firefox Home Button Search it is always set to google and I do not see any option to change that?
I like the Firefox Home Button Search (or whatever it's called) otherwise, but it's annoying that it does not use the default from Firefox.
I use the Google Now Launcher.

''philipp [[#answer-704494|said]]''
<blockquote>
...usually it will be enough to switch the default engine in firefox back and forth once to work around the issue...
</blockquote>
Thank you, problem resolved

A question about using the history tool after using the extraction tool in photoshop cs3..

For example:
http://www.layersmagazine.com/photoshop-...
When I use the history tool, it erases the image instead. Whats up with that?

G'day Chris
I can't tell from the link exactly which tutorial you mean!
If the original layer is a white background and the snapshot is set to this then the history tool will paint back white even if you then paste or drag an image onto the layer above this.
You would have to take a seperate snapshot of your image layer and set this layer as the snapshot you want the history tool to use before you start working on it.
One neat thing you can do is if you paint back some detail with the history brush you can immediately go to Edit > Fade and fine tune how much of the effect you want to apply.
Hope this helps.
regards
John

Searching article about using the trex crawler to crawle the SAP help ...

Similar Messages

Maybe you are looking for