SecSNMP.dll error at print

Received secSNMP.dll error when trying to print a pdf. Ran scan and did not find any threats. Does someone know how do I fix the problem?t.

It may be a Printer driver error: http://answers.microsoft.com/en-us/office/forum/office_2010-powerpoint/powerpoint-secsnmpd ll-print-error/80f1643c-ba2b-48a4-8d7a-8b3079628a56

Similar Messages

Ad2kregp.dll error when printing to PDF file

Greetings,
I use Acrobat 7.0 to print reports from a home grown SQL Server application to PDF on a Dell laptop with WinXP. When I'm logged on in the office everything works fine. When I try it from home via VPN I get the follwoing error message:
Access violation at address 70001CC7 in module 'AD2KReGP.DLL'. Read of address 00000000.
I searched both the knowledge base and forums and have found no matches to my situation. Any help is greatly appreciated.
Thanks,
Brian McCulloch

One of my users was getting the same error message when trying to print to a pdf from freq12. This problem is an adobe problem though. What I did to fix the problem was I got a copy of the 'AD2KReGP.DLL' from a computer that adobe was working fine on and replaced the bad one with it. The location of the file to be replaced is: C:\WINDOWS\system32\spool\drivers\w32x86\3
After replacing the bad file with the file from another computer it worked great. Hopefully this helps.
Ben Hall

Error while printing.

Error while printing.

PowerPC Mac 10.4.11, Print with Safari with: Error while printing.
Others AP: Printer Setting Utility can't pop up, no effective.

HP LASERJET CP1525nw print error when printing online Gmail emails with Google Chrome

HP LASERJET CP1525nw print error when printing online Gmail emails with Google Chrome. Extra large font sizes and weird formatting issues only when printing emails from Gmail within Chrome. No problems when printing the same email from Gmail+Internet Exolorer or Thunderbird. Using the IE Tab extension in Chrome prints the email correctly but the style of Gmail's message window is completely weird ie: formatting bar is spread out vertically instead of horizontally. I believe it is clear that this is an application specific issue between the HP LASERJET CP1525nw printer and Google Chrome + Gmail. This printing scenario does not occur when printing anything else or when printing via another printer. I would appreciate receiving any suggestions to solve this issue.
OS: Windows 7 Ultimate x64
Browser: Google Chrome 15
HP Print driver: HP Universal Print Driver for Windows PCL6 v5.4.0
Printer is connected by WiFi to 4 computers

Hi AbZu,
You need to contact Google Chromes technical support as this is only an issue with Chrome. You have indicated that the printer functions correctly everywhere else. Check out the link below for Google Chrome technical support. Let me know if you need additional assistance?
http://support.google.com/chrome/?hl=en
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Error when printing reports from forms in Linux

Im having an error when printing a report from a form. The problem is, only with certain forms. when printing a report (to PDF) from other forms, it prints with no problems. The oracle is 10g AS and operating system is Redhat AS 3.
The error, in the log from the reports server is:
[2004/9/7 7:14:59:599] Exception 62204 (): Internal error writing the image BandCombine: a row of the matrix does not have the correct number o
f entries, should be OpImage.getExpandedNumBands(source0.getSampleModel(), source0.getColorModel()) + 1..
exception oracle.reports.RWException {
oracle.reports.RWError[] errorChain={struct oracle.reports.RWError {
int errorCode=62204,
java.lang.String errorString="Internal error writing the image BandCombine: a row of the matrix does not have the correct number of entries, sh
ould be OpImage.getExpandedNumBands(source0.getSampleModel(), source0.getColorModel()) + 1..",
java.lang.String moduleName="REP"
at oracle.reports.utility.Utility.newRWException(Utility.java:604)
at oracle.reports.toolkit.image.writer.JPEGImageWriter.writeImage(JPEGImageWriter.java:130)
at oracle.reports.toolkit.image.ImageManager.writeJPEGImage(ImageManager.java:524)
at oracle.reports.engine.EngineImpl.CRunReport(Native Method)
at oracle.reports.engine.EngineImpl.run(EngineImpl.java:353)
at oracle.reports.engine.EngineClassPOATie.run(EngineClassPOATie.java:84)
at oracle.reports.engine.EngineClassPOA._invoke(EngineClassPOA.java:117)
at oracle.reports.engine.EngineClassPOA._invoke(EngineClassPOA.java:62)
at com.inprise.vbroker.poa.POAImpl.invoke(POAImpl.java:2355)
at com.inprise.vbroker.poa.ActivationRecord.invoke(ActivationRecord.java:104)
at com.inprise.vbroker.GIOP.GiopProtocolAdapter.doRequest(GiopProtocolAdapter.java:492)
at com.inprise.vbroker.IIOP.ServerProtocolAdapter.doRequest(ServerProtocolAdapter.java:64)
at com.inprise.vbroker.GIOP.GiopProtocolAdapter.dispatchMessage(GiopProtocolAdapter.java:653)
at com.inprise.vbroker.orb.TPDispatcherImpl$TPDispatcher.run(TPDispatcherImpl.java:99)
at com.inprise.vbroker.orb.ThreadPool$PoolWorker.run(ThreadPool.java:76)
[2004/9/7 7:14:59:599] Error 50103 (C Engine): 19:14:59 ERR REP-0069: Internal error
REP-62204: Internal error writing the image BandCombine: a row of the matrix does not have the correct number of entries, should be OpImage.get
ExpandedNumBands(source0.getSampleModel(), source0.getColorModel()) + 1..
[2004/9/7 7:14:59:600] Error 50103 (C Engine): Error Writing Image, ID 2
[2004/9/7 7:14:59:601] Error 50103 (rwtic:rwticga): Look up for image attributes for image 2
[2004/9/7 7:14:59:602] Error 50103 (rwtic:rwticgi): Looking up for Image, ID 2 in the cache
[2004/9/7 7:14:59:603] Error 50103 (rwtic:rwticgi): Loading the Image into the cache
[2004/9/7 7:14:59:603] Debug 50103 (ImageManager:getImageSource): Retrieving the Image object for ID : 2
[2004/9/7 7:14:59:603] Error 50103 (rwtic:rwticgi): Image successfully loaded into the cache
[2004/9/7 7:14:59:604] Debug 50103 (ImageSource:getImageHeight ): Start Height : 155
[2004/9/7 7:14:59:604] Debug 50103 (ImageSource:getImageWidth ): Start : width : 138
[2004/9/7 7:14:59:604] Debug 50103 (ImageSource:getImageColorSpace ): Start
[2004/9/7 7:14:59:608] Exception 50125 (): Caught exception: java.lang.NullPointerException
exception oracle.reports.RWException {
oracle.reports.RWError[] errorChain={struct oracle.reports.RWError {
int errorCode=50125,
If anyone could help me, is important !
Thx in advance
Bruno Santos

Raise a TAR I reckon

Error during print request output. l_rc = 1

Hi ,
I have a request to create on ouput device which can copy the spool request to desired location in application server. Our server is not connected to any physical server and is windows NT.
I am tring to create ACCESS TYPE 'L' with host printer name '__default'.
I am using control set to copy file at desired location on server
COPY &F <path for file to be copied>&T
File is being copied to desired location but its returing error message "Error during print request output. l_rc = 1"
Complete log is below:
      SAP spool error log
      =====================
Print request processing log
The host spool is reporting errors
Message from host spool:
1 file(s) copied.
End of message
Command used: COPY E:\usr\sap\D06\DVEBMGS00\data\000002934300001.D06 E:\interface\D06\
Errors occurred processing this print request
Error during print request output. l_rc = 1
There may be no printout
Most important attributes of spool request
Request number 29343
Request name SCRIPT ZRAJ BASISADMIN
Client 220
Owner BASISADMIN
Request attributes
Time created   2008102906203900
Remaining life +00008000000
Dispo 1 (Go/Hold) G
Dispo 2 (Keep/Delete)     K
Dispo 3 (Indirect/Direct) D
Default output device ZRAJ
Default no. copies 1
Format X_PAPER
Main print request characteristics
Spool request number 29343
Print request number 1
Print request attributes
Time created   2008102906203900
Output device ZRAJ
Format X_PAPER
Character converter active when first problem occurred
No information available
Pls help.
Regards
Raj Kiran

If you have done a search with your subject line, you would have got the following [results.|https://www.sdn.sap.com/irj/sdn/advancedsearch?query=%22errorduringprintrequestoutput.l_rc%3D1%22&cat=sdn_all]
so do a search in SCN before posting your question.
Regards
Karthik D

"Print Error Whilst Printing" when trying to print or save as PDF

I don't understand why i can't just print - everytime it says Print error whilst printing whether i'm actually trying to save it or print it. I'm very new to using Macs - 3 days now so not used to how they work yet but i'm running Tiger 10.4.8 on an Intel Mac if anyone can help me please!

Hello Dorin and thank you for your answer.
Yes page 5 is a double page spread and this is not the only one in my book! I will modify the page 5 to see if the error message will appear at the next double page spread....
Thanks again
Richard

Save to PDF in TextEdit - Error While Printing

When I try to save a text file to PDF I receive the error message - "Error while printing". This only seems to be happening to text files I open or create in TextEdit. It works fine if I log in as a different user. I've run repair permissions and also deleted a couple of com.apple.print plist files in my user library, but the error remains.
Is there anything else I should try short of reinstalling TextEdit?
Thanks in advance for any advice!
Rick

On OS X 10.8.2, with TextEdit, I can open or create text documents and export to PDF without any issue.
Here are the two preference tabs and settings that work for me. You can single click on the images for a larger version.
New Document
Open and Save
PDF documents on OS X are created with binary content, which is the junk you observe.

Hp 5535 will not scan, error message printer not found

I have a HP Envy 5535. I have only been able to scan one time with it. I scanned 22 documents, after running HP Scan Doc 4.4. Each time the HP Scan Doc states that everything is OK, yet as soon as I try to do even a test scan, I get the error message "Printer not found." I have also tried to run this scan with my McAfee virus firewall off, and it still doesn't work. I have also identified it on McAfee as part of my network.
This question was solved.
View Solution.

Hi @prazdancr,
Welcome to the HP Forums!
I am sorry that you cannot scan with your HP Envy 5535, but I am happy to help!
For further assistance I will need to know:
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
If the printer is connected, Wireless, or USB.
If the printer is able to make copies by itself.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
In the meantime, please try going through this scanning guide. A 'The computer is not responding' Error Message Displays During Scanning.
Hope to hear from you soon, and have a nice day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Guide to overcome hal.dll error - disk error & other errors.

Okay to start off with - guide for installing bootcamp.
DISCLAIMER:
I take no responsibility at all - whatsoever for any damage the following steps cause to anything. If you follow this guide and then are annoyed at me in any way - don't be - you followed these steps knowing they could be dangerous to your hard drive / computer / sanity / etc. That said - good luck & these steps should work for everyone.
requirements: XP SP2 CD & a copy of parallels would be useful. Also a non-apple usb keyboard for step 1 if the apple one doesn't work during xp bootup.
1. First try the usual bootcamp assistant method. Insert the xp disk, in the setup make sure you format the drive to NTFS (not quick). If you don't get this option - skip to step 3.
2. Reboot and hopefully everything will go without a hitch. If it doesn't and you get a hal.dll error or any other kind of error go on to the next step.
3. Boot up mac os x. Install parallels desktop.
4. Insert your windows xp sp2 cd.
5. Create a new virtual machine using a virtual hard drive saved in your documents folder somewhere.
6. Configure it so that the bootcamp drive is added as an extra secondary drive in the virtual machine. (Little plus button down at the bottom).
7. Install XP onto the virtual machine - don't activate or anything, just get to the desktop stage as fast as possible.
8. Parallels will have already asked for your password to dismount the boot camp drive.
9. Double click my computer in the virtual machine, then hold down ctrl+shift and click on the BOOTCAMP partition in the my computer window.
10. Click format.
11. Select NTFS as file format, check enable compression - do not check quick format.
12. Wait till its finished and then power down the virtual machine.
------- The following steps are taken from http://communities.vmware.com/thread/114529 and were written by MandarMS from the vmware forums. I have edited the guide a little - (you'll see where). Thanks and all credit to MandarMS.----
13. (James: Close parallels)
14. Quit all applications in Host Mac OS X
15. Open Terminal utility from Macintosh HD : Applications : Utilities folder.
16. Key-in the following command
$ sudo fdisk /dev/rdisk0
17. Preferably take the screenshot of the output or Note down the output (for restoring MBR).
18. Key-in the following command
$ sudo fdisk -e /dev/rdisk0
setpid 3
Choose 07 (as the partition type)
write
Y
Restart your Mac System
(James: EDIT - BELOW IS AN EXAMPLE OF THE OUTPUT OF THE PROGRAM IF YOU ARE UNSURE OF WHAT TO TYPE IN WHERE - This confused me at first but really helped in the end - James)
For more details please check the example shown below:
$ sudo fdisk -e /dev/rdisk0 (this will help to change the MBR)
$ fdisk: could not open MBR file /usr/standalone/i386/boot0: No such file or directory
Enter 'help' for information
fdisk: 1> setpid 3 (Enter “setpid 3” press enter key)
Starting Ending
#: id cyl hd sec - cyl hd sec start - size
*3: 0B 1023 254 63 - 1023 254 63 1127792680 - 337356448 Win95 FAT32L
Partition id ('0' to disable) 0 - FF: [C] (? for help) 07 (Enter 07 Partition table)
fdisk:*1> write (enter “write” press enter key, This will change the MBR)
Device could not be accessed exclusively.
A reboot will be needed for changes to take effect. OK? [n] Y (Press Y to modify changes)
Writing MBR at offset 0.
$ fdisk: 1> exit (enter “exit”, press enter key)
19. Restart your Mac System
------ Back to me again.
20. Welcome back - your drives have just been fixed. Reboot again and insert the windows xp sp2 cd. Hold down option at startup and boot from the cd.
21. Go through the setup again - this time don't do anything to the drives when it asks you to format.
22. wait...
23. It'll reboot......
24. It'll install..... if it doesn't - skip to step 26
25. Welcome to windows, install your drivers and reboot a couple more times. You're good.
26. (it didn't work... you got the hal.dll error or something similar) Boot up mac os x again and launch parallels.
27. Start up the virtual machine - open up BOOTCAMP in my computer.
28. Click view - folder options
29. View types > make sure you can see hidden files and folders, view system files and etc.
30. Right click boot.ini and click properties
31. Uncheck read-only.
32. Click okay - open boot.ini in notepad.
33. If you're on a mac with 2 partitions: 1 mac hd, 1 bootcamp, delete everything in the boot.ini file and copy and paste the following into it:
\[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(3)\WINDOWS
\[operating systems]
multi(0)disk(0)rdisk(0)partition(3)\WINDOWS="Microsoft Windows XP Professional" /noexecute=optin /fastdetect
Obviously change the name to suit. Save it and reboot - you should be good to go now.

Hi. Your bootcamp drive should be drive C. It shouldn't matter what drive letter it is really, you make the virtual machine disk as a virtual disk saved in your documents folder and hook it in to use your physical bootcamp drive.
Ensure you've typed in the correct command and correct password. Press enter after you type in the password. You won't see it as you type it in, and you may need to wait some time afterwards before you'll see the next prompt. Leave it 2 minutes.
Sorry I've been abroad.. hope you have it worked out by now anyway mate.

NI 5660 Driver DLL Errors when using Teststand 2010 and LabVIEW Run-Time Engine 2010

This problem seems similar to the post "Resource not found error in executable on development machine." but I didn't want to repost under that thread because I only happened upon it by chance and none of my searches brought me there... so I made a more descriptive Subject.
I am working on a system that uses a PXI Chassis with a NI 5600 Downconverter and a NI 5620 high speed digitizer, among other PXI Cards.
I inherited working code written in LabVIEW 2010, running with the LabVIEW Run-Time Engine 2010. The code was using a custom executive and my task was to rewrite the test using TestStand 2010. I reused the majority of the old code. The old code used NI-5660 to control the 5600 and 5620. When I run my sequence using the LV Development System and TestStand, it runs without any issues. When I change the adapter over to LabVIEW Run-Time Engine 2010, all of my NI5660 VIs become broken due to DLL issues. It warns that the nipxi5600u.dll was not initialized correctly. Many of the errors are associated with the NI Tuner and NI Scope. After this LabVIEW will crash randomly, and the seqeunce will not work in TestStand even when back with the LV Development Adapter. The only way to recover after this is to restart the computer - TestStand automatically reverts back to the development system, the VIs are no longer broken and the sequence works again.
I have all of my VIs associated with a project. After reading a little bit about DLLs and TestStand, I found all of the DLLs in the dependencies section of my project and added them to my TestStand workspace. I also used Dependency Walker to track down the problems with the nipxi5600u.dll, the 2 DLL files that it said were not found already existed in the same folder as the original DLL (C:\Windows\System32). I have also performed a Mass Compile to make sure everything was running in LV 2010. If I skip the steps involving the 5660, my entire sequence runs fine.
The previous code was running with the LabVIEW Run-Time Engine without any issues. Is there just a step I am missing? Has anyone seen anything like this before? I can send screenshots of errors to provide more detail if necessary.

I have tried some more things and still can't get it to work. I have added the VIs mentioned in the Notes On Creating Modulation Executables KB both to the TestStand workspace and the LabVIEW project holding all of my VIs. This did not change the results.
When I try to run my sequence, The first error I get is shown in Error 1445.bmp. This happens when I try to use the NI 5660 initialize.vi. If I click ignore, the next error I see is shown in Error -20551.bmp. When I try to open the VI to look at it, I get the 2 DLL errors shown in Error loading nipxi5600u.bmp and Error loading nidaq32.bmp. When I close TestStand, I get the error LabVIEW Fatal Error.bmp.
Attachments:
Error1445.JPG ‏164 KB
Error -20551.JPG ‏174 KB
Error loading nipxi5600u.JPG ‏9 KB

Hello, I have windows 7, Im getting msvcr80.dll error 7(windows error 126) when I tried to update my itunes. Now it won't open. Does anyone have a remedy? And when I try to uninstall it says that the file cant be found.

Hello< I have windows 7, I tried to install the new itunes version, last night 1/30/14, Im getting msvcr80.dll error 7 (windows error 126). Does anyone have a remedy for this? When I try to uninstall the ituned program it says it can't be found and to make sure I have permission to uninstall.

Same problem today. Took five times to reinstall without any error messages. I did the following:
1) Went to the C:\program files (x86)\iTunes and C:\program files\iTunes folders and moved every file ending in .dll to the desktop (even if two files in same location had the same name, just replaced)
2) Restarted computer and still got error message
3) Uninstalled all apple programs possible in the following order......itunes, apples software update, apple mobile device support, bonjour, and apple application support.....all performed using the microsoft control panel
4) put all the .dll files on the desktop in the trash and emptied (this is a step apple support did not recomment in their posted solutions but for a final try I wanted to delete everything apple).
5) Restarted computer.
6) Re-installed itunes from apple website
No error messages during re-install and was able to open shortcut in one try.

Error in Print Report.vi

I get "Unknown Error in Print Report.vi", error code -2147352567 when I run Text Report Example.vi in LabVIEW 6.1. My own code that ran OK in LabVIEW 6.0.2 also produces this same result in V6.1. I have not changed printers. Help.

Hi.
I don't have exact solution for your problem, but it is very familiar to what I experienced.
I install 6.1 and Report Generation toolkit included with new package. I had all my programs written in 6.0.2 with Report Generation from version 1.0.
Almost every other VI from Report Generation did not work after I recompiled my VI into Labview 6.1. I spent several days trying to understand what is going on, made several calls to NI tech support, but nobody could help me. Finally I found solution:
Uninstall New Report Generation toolkit Version 1.0a included into latest package of Labview 6.1 and install the very first version (I have it distributed as separate CD).
After such maneuver everything works fine.
I had another problem with this tool and especially Pri
nt report.vi:
I have PDS package, and Print report.vi works excellent on my computer printing Standard Report. However when I create stand-alone application and distribute it together with run-time engine on user computers, it gives me error and I can only print creating Excel or Word type of report.
So, that is my experience. I think NI still has several bugs to work on. And if you find any other solutions, please let me know.
Good luck.

Server 2008 R2 Terminal Server c0000005 and c0000006 errors with KERNELBASE.dll error in RDP sessions.

We installed a new Server 2008 R2 server this spring. It is configured as a Terminal Server with 16 Wyse t10 thin clients connecting with RDP. We are a small resort so we run Springer Miller Host and SpaSoft. Ever since moving from PCs to the thin clients
and TS we have been seeing SpaSoft randomly crash with KERNELBASE.dll errors and also a lot of c0000005 and c0000006 errors. Springer Miller support says its a Microsoft Networking issue so no help there. The company we worked with to install this has no clue
so I hope to reach out to this community to solve this. I can also open support case with Microsoft Support but I am not sure if they will be of any help. Here are some examples of the errors:
"Event 1000
Faulting application name: SpaWin.exe, version: 3.4.0.0, time stamp: 0x2a425e19
Faulting module name: KERNELBASE.dll, version: 6.1.7601.18409, time stamp: 0x53159a86
Exception code: 0x0eedfade
Fault offset: 0x0000c42d
Faulting process id: 0x3718
Faulting application start time: 0x01cf9ac7922487e9
Faulting application path: \\spasoft\spaapps\TermServ\SpaWin.exe
Faulting module path: C:\Windows\syswow64\KERNELBASE.dll
Report Id: cfdcf9a9-06ba-11e4-a5af-000c298d9aa5"
Also:
"Faulting application name: VH.EXE, version: 18.80.430.0, time stamp: 0x3f73b447
Faulting module name: VFP8R.DLL, version: 8.0.0.3117, time stamp: 0x3f73c232
Exception code: 0xc0000006
Fault offset: 0x0001d598
Faulting process id: 0x2bc8
Faulting application start time: 0x01cf99297ee1742f
Faulting application path: J:\HOSTPLUS\fxp32\VH.EXE
Faulting module path: J:\HOSTPLUS\fxp32\VFP8R.DLL
Report Id: 5fbc65c4-055c-11e4-a5af-000c298d9aa5"
And:
"Faulting application name: SpaWin.exe, version: 3.4.0.0, time stamp: 0x2a425e19
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x00000000
Faulting process id: 0x2aa0
Faulting application start time: 0x01cf988e6770e619
Faulting application path: \\spasoft\spaapps\TermServ\SpaWin.exe
Faulting module path: unknown
Report Id: 01029179-04b9-11e4-a5af-000c298d9aa5"
There are no network specific errors in any of the logs. I am thinking that SpaSoft needs to be run as an administrator but I am not sure how to do that in this environment. We have disabled DEP for all but essential Windows processes. All of the firewall
and AV has been completely disabled, and still getting these errors. Is there a way to run these applications as admin without the user actually being an admin? Should I go ahead and open a Microsoft support case? Thanks

Hi,
Thank you for posting in Windows Server Forum.
Explanation
The indicated program stopped unexpectedly. The message contains details on which program and module stopped. A matching event with Event ID 1001 might also appear in the event log. This matching event displays information about the specific error that occurred.
User Action
If an error report was generated for this error, you might be able to obtain more information about the error by sending the report to Microsoft for analysis.
Yeah, you can open a support case with Microsoft as they will help and guide you for proper solution. You can go through
this source article.
Hope it helps!
Thanks.
Dharmesh Solanki

"Printing: Error while printing" when I tries to Save - How?

Since recently, whenever I tried to save a Pages document, Pages freezes for a few minutes, then show me a system message that says "Printing: Error while printing". I did not ask Pages to print anything! Please advice. Thank you very much.

You have not provided exact system info, no details about your documents, your save locations nor even told us what version of PS, so nobody can even begin to guess.
Mylenium

SecSNMP.dll error at print

Similar Messages

Maybe you are looking for