Section/Template Handles for Sakai Integration

Hello,
I am working with Shepherd University's Learning Management System, the open-source Sakai, and trying to integrate it with our iTunesU account. There is already a tool (albeit a bit older and possibly out of date, I'm not sure) for Sakai that is to integrate with iTunesU, but there are a couple credentials and variables I don't have off-hand. I know, from our account information, the shared secret, the different credentials for Administrator, etc. But, my problem comes in needing a section handle for the location to have the sites inserted, and a template handle for the system to follow in creating new pages on iTunesU. Though we have an iTunesU account, it is rather new and we haven't used it much, so we are not very familiar with the system.
I've seen that I could get the handles for the sections and pages using a ShowTree command, but the process to get to that is rather long for one single inquiry, and thus far I'm having much trouble in getting that to work. Also, I'm not sure if this will get me the handles for any templates I have set-up. Is there any easier or better way just to get this basic information? Thus far I do not even know the handle, offhand, for the top-level of our account's site, much less any of the sections or tracks underneath it. Any help would be much appreciated!
Regards,
Adin J. Ray

please check:
SAP Note Number: 923359
Terminology has been changed as of SAP NetWeaver 7.0 (2004s) Support Package Stack 6:
The configuration wizard was called "Template Installer" and is sometimes refered to as "Central Technical Configuration" or "CTC".
The configuration tasks, which are selected and started from a list in the configuration wizard, were formerly called "templates".

Similar Messages

Possibility to register Pre-/Post-Procedures for an SQL Template Handler

I would appreciate to see the possibility to register pre-/post-procedures for an SQL template handler in ORDS 3.0.
Why:
We use Oracle VPD/Row-Level-Security to secure data access. Hence a trigger sets a couple of attributes in the database session context at login time which are then used in static RLS predicates to limit which records the user can see/modify.
With ORDS 3.0 all sessions are opened under the same technical user (e.g. APEX_REST_PUBLIC_USER), hence all users have the same/no attributes in the session context and could see/modify all data.
To avoid this situation, I need to set the attributes (e.g. the authenticated user) in the database session context before the actual query/plsql handler is executed.
Also, resetting the session context after the handler is executed would be good.
This scenario is in line with scenarios 'One Big Application User' and 'Web-based applications' in http://docs.oracle.com/cd/B28359_01/network.111/b28531/vpd.htm#DBSEG98291.
Different solution approach:
Kris suggested to write a PL/SQL handler where the pre-procedure is called before the business logic procedure/query. This is ok for me as long as I modify data and only need to return no or little data.
As soon as I need to return a lot of data (e.g. select c1, c19, c30 from t1), this approach will force me to write a lot of code in the PL/SQL handler in order to marshal the c1, c19 and c30 to JSON and put it in the HTTP response.
But this is the beauty of ORDS - I can simply define a template, write a GET SQL Handler 'select c1, c19, c30 from t1' and have the data available as REST service, without writing any code to write JSON marshaled data in the HTTP response.

I tried to log the request at Oracle REST Data Services (ORDS) but I could only start a new discussion: Possibility to register Pre-/Post-Procedures for an SQL Template Handler
As I mentioned there, the PL/SQL handler approach works for me as long as I have no or only little data to send back to the client (e.g. put/post/delete succeeded or an error message why the call failed).
If I need to return a lot of data from the PL/SQL handler I would need to, as far as I understand, to marshal the data to JSON and write it to the response body in the PL/SQL handler.
I don't want to do the marshaling, because ORDS does it better.
However, this works for me:
I write a pipelined stored procedure that takes as input the attributes I need to set in the session context. I then can reference it in the SQL handler:
select * from table(my_pipelined_function(:USER, ....)
Now the JSON/HTTP response is created by ORDS again.
I still needed to code a couple of lines, but it is way better than duplicating the functionality already existing in ORDS.
With the hooks it would be perfect because I would not have to write any code (apart from the procedure to set the session context attributes), just configure the REST services in ORDS.

"Message Rejection Handler" for the file/ftp adapter using fault policy

Hi guys,
We are trying to implement "Message Rejection Handler" for the file/ftp adapter using following fault policy configuration.
Fault Policy:
`````````````
<?xml version='1.0' encoding='UTF-8'?>
<faultPolicies xmlns="http://schemas.oracle.com/bpel/faultpolicy">
<faultPolicy version="2.0.1" id="ProcessNameGenericPolicy"
xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns="http://schemas.oracle.com/bpel/faultpolicy"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Conditions>
<faultName xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
name="bpelx:remoteFault">
<condition>
<action ref="ora-retry"/>
</condition>
</faultName>
<faultName xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
name="bpelx:bindingFault">
<condition>
<action ref="ora-rethrow-fault"/>
</condition>
</faultName>
</Conditions>
<Actions>
<Action id="ora-retry">
<retry>
<retryCount>3</retryCount>
<retryInterval>1</retryInterval>
<retryFailureAction ref="ora-rethrow-fault"/>
</retry>
</Action>
<Action id="ora-rethrow-fault">
<rethrowFault/>
</Action>
<Action id="ora-human-intervention">
<humanIntervention/>
</Action>
<Action id="ora-terminate">
<abort/>
</Action>
</Actions>
</faultPolicy>
<faultPolicy version="2.0.1" id="ProcessNameHumanInterventionPolicy"
xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns="http://schemas.oracle.com/bpel/faultpolicy"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Conditions>
<faultName xmlns:medns="http://schemas.oracle.com/mediator/faults"
name="medns:mediatorFault">
<condition>
<test>contains($fault.mediatorErrorCode, "TYPE_TRANSIENT")</test>
<action ref="ora-retry-with-intervention"/>
</condition>
</faultName>
<faultName xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
name="bpelx:remoteFault">
<condition>
<action ref="ora-retry-with-intervention"/>
</condition>
</faultName>
<faultName xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
name="bpelx:bindingFault">
<condition>
<action ref="ora-rethrow-fault"/>

</condition>
</faultName>
</Conditions>
<Actions>
<Action id="ora-retry-with-intervention">
<retry>
<retryCount>3</retryCount>
<retryInterval>1</retryInterval>
<retryFailureAction ref="ora-human-intervention"/>
</retry>
</Action>
<Action id="ora-retry">
<retry>
<retryCount>3</retryCount>
<retryInterval>1</retryInterval>
<retryFailureAction ref="ora-rethrow-fault"/>
</retry>
</Action>
<Action id="ora-rethrow-fault">
<rethrowFault/>
</Action>
<Action id="ora-human-intervention">
<humanIntervention/>
</Action>
<Action id="ora-terminate">
<abort/>
</Action>
</Actions>
</faultPolicy>
<faultPolicy version="2.0.1" id="RejectedMessages">
<Conditions> 
<faultName xmlns:rjm="http://schemas.oracle.com/sca/rejectedmessages" name="rjm:PartnerLinkName">

<condition>
<action ref="writeToFile"/> 
</condition>
</faultName>
</Conditions>
<Actions> 
<Action id="writeToFile">
<fileAction>
<location>Server/Loc/path</location>
<fileName>Rejected_AJBFile_%ID%_%TIMESTAMP%.xml</fileName>
</fileAction>
</Action>
</Actions>
</faultPolicy>
</faultPolicies>
Fault Binding:
``````````````
<?xml version='1.0' encoding='UTF-8'?>
<faultPolicyBindings version="2.0.1"
xmlns="http://schemas.oracle.com/bpel/faultpolicy"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<composite faultPolicy="ProcessNameGenericPolicy"/>
<service faultPolicy="RejectedMessages">
<name>PartnerLinkName</name>
</service>
<reference faultPolicy="RejectedMessages">
<name>PartnerLinkName</name>
</reference>
</faultPolicyBindings>
We have SyncFileRead partner link.
The expectation is: when the message read by SyncFileRead partner link is rejected,
that rejected message should come to particular directory in the server.
Could you please help us fixing this.
TIA.

HI..
Have a look at this blog :
3) Error: HTTP_RESP_STATUS_CODE_NOT_OK 401 Unauthorized
Description: The request requires user authentication
Possible Tips:
u2022 Check XIAPPLUSER is having this Role -SAP_XI_APPL_SERV_USER
u2022 If the error is in XI Adapter, then your port entry should J2EE port 5<System no>
u2022 If the error is in Adapter Engine
u2013then have a look into SAP note- 821026, Delete the Adapter Engine cache in transaction SXI_CACHE Goto --> Cache.
u2022 May be wrong password for user XIISUSER
u2022 May be wrong password for user XIAFUSER
u2013 for this Check the Exchange Profile and transaction SU01, try to reset the password -Restart the J2EE Engine to activate changes in the Exchange Profile After doing this, you can restart the message
Http* Errors in XI
Thanks,
Pooja

Define Logical Systems and Template Names for BW Reports

Hi experts
I would like to know if someone used the mentioned functionality 'Define Logical Systems and Template Names for BW Reports, I would like to know too IF I create a Z REPORT for example in webdynpro and insert it in this configuration it will work and where it will appear in sourcing cockpit?
sds.
Javier

Hello Muthu,
BW reports will be shown in SRM Box if the corresponding BW roles for SRM are integrated with SRM roles.
You might to activate the corresponding datasource of this in SRM.
And since you have to connect the source system to BW, I think you have to define SRM system as logical system in BW.
Regards,
Pavan

How to configure Send Handler for BizTalk 2013 Dynamic Send Port on deployment?

Hi,
I do know how to manually configure a send handler for a dynamic send port in BizTalk 2013 Administration console. Though, once you export your application's configuration to a binding file, the dynamic send port's configuration does not
contain any information regarding the send handler. When you try to use this binding file when deploying your application your dynamic port's send handler falls back to the default host instance.
So my question is, how could we automate this process to avoid manual step in a dynamic port configuration during deployment?
Thank you,
--Vlad

Hey vlad,
As discussed at work in the office.. I woudl take the powershelll approach for now as a workaround. Here's a trivial script for my local dev box (all in one biztalk & SQL) (must be run in an x86 powershell session):
param
[string] $bizTalkDbServer = ".",
[string] $bizTalkDbName = "BizTalkMgmtDb",
[string] $fileHostInstance = "SendingHost",
[string] $sendPortName = "sm_dynamic_sp_test"
[System.reflection.Assembly]::LoadWithPartialName("Microsoft.BizTalk.ExplorerOM") | Out-Null
$catalog = New-Object Microsoft.BizTalk.ExplorerOM.BtsCatalogExplorer
$catalog.ConnectionString = "SERVER=$bizTalkDbServer;DATABASE=$bizTalkDbName;Integrated Security=SSPI"
foreach($sp in $catalog.SendPorts)
if($sp.Name -eq $sendPortName)
  "Found send port $($sp.Name), analyzing send handler"
  foreach($sh in $sp.DynamicSendHandlers)
   if($sh.SendHandler.TransportType.Name -eq "FILE")
    if($sh.SendHandler.Host.Name -ne $fileHostInstance)
     "Changing $($sh.Name) send handler to '$fileHostInstance' from '$($sh.SendHandler.Host.Name)'"
     $sp.SetSendHandler("FILE", $fileHostInstance)
    else
     "Send handler for $($sp.Name) is already '$fileHostInstance' ignorning .. "
$catalog.SaveChanges()

Best practices for apps integration with third party systems ?

Hi all
I would like to know if there is any document from oracle or from your own regarding best practices for apps integration with third party systems.
For example, in particular, let's say we need customization in a given module(ex:payables) need to provide data to a third party system, consider following:
outbound interface:
1)should third party system should be given with direct access to oracle database to access a particular payments data information table/view to look for data ?
2) should oracle create a file to third party system, so that it can read and do what it need to do?
inbound:
1) should third party should directly login and insert data into tables which holds response data?
2) again, should third party create file and oralce apps will pick up for further processing?
again, there could be lot of company specific scenarios like it has to be real time or not... etc...
How does companies make sure third party systems are not directly dipping into other systems (oracle apps/others), so that it will follow certain integration best practices.
how does enterprise architectute will play a role in this? can we apply SOA standards? should use request/reply using Tibco etc?
Many oracle apps implementations customizations are more or less directly interacting with third party systems by including code to login into respective third party systems and vice versa.
Let me your know if you have done differently and that would help oracle apps community.
thanks
rrb.

you want to send idoc to third party system (NONSAP).
what kind of system is it? can it handle http requests
or
can it handle webservice?
which version of R/3 you are using?
what is the mechanism the receiving system has, to receive data?
Regards
Raja

Define default for excel integration to report painter

Hello,
I am running report painter.
I am using office integration to display the report with Microsoft
Excel.
The Excel opens with left to right display.
I want to display him right to left - but I cannot define right to left
as a default.
Where can I define defalut template for excel integration to report painter?
Regards,
Amit Blumshtein

Hello,
Thank you for the replies. I did resolve the issue above (K9 072), the account group gave me a cost center and cost element that was blocked for use. Once I usees a valid cost center and cost element, the error went away.
We are using SAP version 4.6
With that said... I did receive another error, "Enter a numeric value"
Enter a numeric value
Message no. 00 052
The valid cost centers are alphanumeric, not just numeric. For instance: IT1 is a cost center.
Can alphanumeric values be used? If so, how to I go about making them work with the upload in KP06?
I have looked at the layout in report writer (KP66) and I see no options on allowing alphanumeric values. However, I am very new to this and just may be missing it.
Any suggestions would be greatly appreciated.
Thank you very much!
Rhonda

Missing Template Handler is missing in action.

After a bit of struggle I found out how to input a missing
template
handler into our aged 4.5 Unix ColdFusion server. I was able
to have it
server up the custom 404error.htm file developed by our web
department.
And this worked, sort of.
The problem was that this HTML file makes use of Apache
 directives which, of course, ColdFusion does
not understand.
So, I say no problem, I've dealt with this already before and
expanded
on some existing code that reads the html file and replaces
all these
virtual includes with the contents of the included file using
<cfile...>
tags and reFind() functions. This version even uses a Custom
Tag and
recursion to handle virtual includes inside of virtually
included files.
And this works great!
http://www.cdpr.ca.gov/errors/404error.cfm.
But when I then went into the ColdFusion administrator and
replaced the
HTML file path
'/rootDir/subDir/subDir/htdocs/errors/404error.htm'
with the corresponding CFML path
'/rootDir/subDir/subDir/htdocs/errors/404error.cfm' it stops
working.
ColdFusion starts to display the default ColdFusion 404 not
found error
rather then my specified Missing Template Handler.
What's wrong here? Why can't I server up a CFM file from the
exact same
place I can serve up an, albeit incomplete, HTML file?

User Since V1.5 wrote:
>
> I will be very happy if someone points out what I'm
missing.
>
Everything you have describe is true. The main point is that
sometimes
people do not want to and that there are reasons not to let
IIS handle
ColdFusion missing templates.
To be as clear as possible, if you have set IIS to check for
the
existence of a cfm file and then throw either a default or
custom HTTP
404 error page this will overwrite anything that could of or
would of
been done with a ColdFusion missing template page.
Sometimes this is a bad thing. For one example, there are
techniques
and development methodologies that build a 'template' or
'response'
completely in memory and a cfm file does not actually exist
in this
case. This is more advanced then many people work with but it
is
possible. In this case your having IIS check for the
existence of a
template would defeat the purpose. Another example is that a
server
wide missing template handler used by the ColdFusion server
can be
passed simple information about the error from ColdFusion,
this does not
happen with the IIS methodology.
So the missing template handler exists for cases where for
one reason or
another somebody does not want to have IIS checking for the
existence of
a cfm template before handing off the request to the
ColdFusion server.
As with many things in life, it is all about choices and what
works for
one person may not work for another.
A common difficulty with the missing template handler is that
it does
not necessarily live in the web server root. It has to live
in the Jrun
(aka Java) server web root which often is different then the
web server
root.
I.E. A common configuration may be this.
c:/inetpub/wwwroot 
c:/jrun/servers/cfusion/cfusion-ear/cfusion-war 
The latter is where the ColdFusion server wide missing
template hander
template file would have to live in this example
configuration.

Override event handler for document events in LiveCycle

I would like to have an email notification when a user opens a policy-protected DRM pdf. Is there a way to override the event handler for Document Open events?
Or perhaps there is a way to access the event database- where can I find this information?

Thank you so much for your reply. I have created an external authorization and am following the steps outlined here: http://help.adobe.com/en_US/livecycle/9.0/programLC/help/index.htm?content=001479.html
I have deployed my jar and restarted JBoss. However, now when I try to create a new policy using my external authorization, I do not see an option to add it on the create new policy page. I see only sections for Users and Groups, General Settings, Advanced Settings, and Unchangeable Advanced Settings. Could you please tell me how to add the external authorization?
Also, in the component.xml file, I followed the sample and kept this line: <component-id>com.adobe.livecycle.samples.externalauthorization</component-id>
Should that be changed? If so, to what?
Thanks.

Oracle SOA Suite for Healthcare Integration

Oracle SOA Suite for Healthcare Integration :
*To provide healthcare customers with comprehensive healthcare integration capabilities within a unified enterprise application infrastructure platform, Oracle announced Oracle SOA Suite for healthcare integration.
*Oracle SOA Suite for healthcare integration delivers healthcare message standards support, dashboards and monitoring for healthcare collaboration, and a toolkit for rapid HIPAA 5010 upgrade and compliance.
*Oracle SOA Suite for healthcare integration helps healthcare organizations lower operating costs and speeds time-to-market by delivering a consistent user interface, management console and monitoring environment, as well as healthcare libraries and templates for healthcare customer projects.
*Oracle SOA Suite for healthcare integration capabilities are part of the Healthcare Adapter for Oracle SOA Suite 11g.
*A component of Oracle Fusion Middleware 11g, Oracle SOA Suite 11g is an integrated, best-of-breed suite that helps organizations rapidly design and assemble, deploy and manage, highly agile and adaptable business applications.
For more details :
http://www.oracle.com/us/corporate/press/520240
Oracle SOA Suite for Healthcare Integration

http://www.oracle.com/technetwork/middleware/healthcare/overview/index.html

Creating organisation structure (SPRO) for an integrated steel plant

HI,
For an integrated steel plant of 2.2 mt capacity (green field) need organisation structure to define. It would be a single legal entity under which the plant would produce wire rods, reinforement bar, billets, coke, sinter, ductile iron pipe, power, pig iron. The ISP will have Blast furnacec, SMS, rolling mill, coke oven, sinter plant, pallete plant, oxygen plant, lime plant, dolo plant, raw materila handling plant, power plant.
Can any body guide to decide the suitable org structure for such spread of manufacturing facilities. We need to identify the hirarchical structure w.r.t Company, Company code, Controlling area, business area, functional area, plant, profit center, cost center with a visioning that in future, the company would come up with other units also of similary capacity.
The plant is at green field stage coming up absolutely from scratch. New set of people has formed the work force top to botton.Desigred reporting (MIS) structure not yet crystalised. Have bent of mind to accept best practice. The plant is in Indian environment.
Request an early reponse please.
Thanks
Saradindu Paul

Hello All,
CAn some body please help, As Project manager for SAP role out I am facing same dillema regarding the org structuring in SAP ECC6.0

Is there a template available for a credit card authorization form?

Is there a template available for a credit card authorization form? (Something professional looking along the lines "I authorize a one time payment in the amount of...select Mastercard, Amex...billing addresss...3 digit code...) Thanks

There probably is, but before you go to far with a PDF form for such information you need to consider how it is to be used.
E-mail is a definite no. Even standard web submission is not acceptable. You would want to submit to a secure web site. If that is the case, it might be better to just use standard HTML processes, but at least https is a needed protocol for things such as credit cards and other personal information. I always look for "https" on line and would probably refuse to use a PDF form that asked for my credit card because of a concern about proper handling. Messing this up could lead to a big law suit against you, suggesting why so many firms just use a payment service.

Problems with missing template handler

Hello,
We have put the name testmiss.cfm in the missing template
handler in the administrator. Still, the default ColdFusion error
message shows when a cfinclude has template=a nonexisting file and
when in an html form,
action=a nonexisting cfm file. I have testmiss.cfm in both
the root with Application.cfm and the directory with all the other
cfms but still no luck.
Any idea what we are doing wrong?
Thank you very much.

bill0 wrote:
> Thanks for all the help but still no luck.
>
> The directory is d:\wSites\GBMain\html\CFMS> and I am
mapped to it as x:\CFMS.
> Most of the cfm files are in CFMS but Application.cfm is
1 directory up in
> html. I have tried misscfm.cfm in both html and CFMS but
had no luck having it
> find a non existant template referred to in a cfinclude
or a form's action
> attribute. The default ColdFusion error handler is what
shows. The missing
> template handler box says /misscfm.cfm. Misscfm.cfm is
text followed by a
> <cfabort>. We use ColdFusion MX6.1
>
> I hope that is enough information to figure what am I
missing and/or doing
> wrong.
>
>
Is the 'misscfm.cfm' file somewhere in the
'd:\wSites\GBMain\html\CFMS\'
directory. I will presume this is the 'web root' as defined
in your web
server (IIS or Apache or built-in or ???). The missing
template handler
file needs to be in the ColdFusion root. This is going to be
a
directory such as
'{drive}:\JRun4\servers\{server}\cfusion-ear\cfusion-war\misscfm.cfm'
for J2EE flavors OR '{drive}:\CFusionMX\wwwroot' for Standard
I think.
It has been a very long time since I have dealt with
Standard.
This is probably completely different from the above web
root. That is
the point I am trying to get across. ColdFusion has TWO roots
where it
will look for a CFML file. But the Missing and Sitewide
templates can
only be in the ColdFusion root listed above, they will not
work in the
web root.
HTH
Ian

Missing Template Handler Issues

Hi there, we're having some problems setting this up. We get
the custom page we've created but still see the default coldfusion
information..... Here's what we've done..
(1) Set the path correctly in the Coldfusion Admin >
Settings. 'Missing Template Handler'.
(2) Made the changes in IIS as described here...
http://kb.adobe.com/selfservice/viewContent.do?externalId=95ee04fb&sliceId=1

You are using CF8 right? Because it works just fine for me.
Here is what I did to test.
1) created a simple cfm template with nothing more than
<cfoutput>helloworld</cfoutput> and
saved it as missing.cfm in my webroot (
http://localhost/missing.cfm
2) logged into the coldfusion administrator and added
/missing.cfm into the box where it asks for the missing template
relative path.
3) hit submit changes.
then browsed out to
http://localhost/SomeStrangePageThatDoesntExist.cfm
and as expected saw only "missing"
The only thing I can think of is that you have in your
missing template page another cfinclude that is failing.
Try the above approach and see if you continue to get the
error.

Can you specify a missing template handler that lives under another site?

I have configured a dedicated site, separate from my website, for my ColdFusion administrator (CFIDE). So I have my website here: http://www.public-site.com/ and my ColdFusion admin here: http://www.cfadmin-site.com/ . They both live on the same server but under different directories. So now I am configuring my ColdFusion settings and wondering if there is some way to configure the missing template handler and site-wide error handler to use files that live under the public site directory so that I can give my users a consistent look?
I am guessing that this is not possible but thought I would ask. I may be left with creating the modules under my ColdFusion admin directory and then using <cflocation> to redirect the user back to the public website environment. Or embedding some javascript to redirect them. Any other thoughts?

OK, now I think I see where you are coming from about not needing to redirect *lightbulb* and perhaps I can explain to you what I am seeing. Again, here is my setup:
web root: D:\wwwroot\public-site\
cf web root: D:\wwwroot\cfadmin-site\
Now let's say I have a file in the web root like this: D:\wwwroot\public-site\error.cfm If I try to enter that in my site-wide error handler in ColdFusion it tells me that the file does not exist. Makes sense.
So I moved my file to the cf web root like this: D:\wwwroot\cfadmin-site\error.cfm and set my site-wide error handler accordingly. Now when I force an exception I get an error that my site-wide error handler failed. In the logs I see this error:
"Error","jrpp-26","11/08/10","14:02:30",,"'' The specific sequence of files included or processed is: D:\wwwroot\public-site\error.cfm'' "
java.security.PrivilegedActionException: coldfusion.runtime.TemplateNotFoundException: File not found: D:\wwwroot\public-site\error.cfm
So now that a template is executing ColdFusion is looking for the site-wide error handler in the web root of the public site. But the ColdFusion administrator will not let me enter that path in the site-wide error handler setting of the administrator page.
Did you run across this too? Surely we don't need to have the file in both locations.

Section/Template Handles for Sakai Integration

Similar Messages

Maybe you are looking for