Secure zone art proofing system

Hey Guys,
Has anyone here had experience with building a design proofing system into their BC site?
I was hoping there would be a way to setup a web app to do this.
It would need the basic features like:
Image of design being proofed
Approve / Reject buttons
Comments
Notifications when approved or rejected
Secure zone access
I'm guessing something like this can be setup with a web app but I have no clue on how to individualize the content based on who is logged in. Would it be possible to use cases to populate the content? I'm new to BC so I don't fully understand all the possibilities here.
Thanks!
-Eric

Hi Chad, and all other Gurus...
We're using the 'email as username' trick - it appears to work fine except for the following problem... Do you know how to work around this??
When a user signs up to a secure zone twice, using the same email (username), but a new password, BC recognises that they are already in the system and sends them a message including the following extract in the web-form summary, but provides no front-end feedback to let them know they already have a username/password.
Username
Your record has an existing username. This will be emailed to you. [[email protected]] - has been ignored.
Password
Your record has an existing password. This will be emailed to you. [******] - has been ignored.
This makes little sense at all to an end user, and we'd like to re-word it to make sense.
Or at the very least redirect the user to a page that tells them that they already have a username/password, and would they like a reminder sent.
Any ideas where/how we can do this?
Best,
Adrian
EASE
Message was edited by: EASE

Similar Messages

Deployment and application do not have matching security zones

Hello community,
I have developed an application in VSExpress 2013 (Win 8.1)) and I'm trying to deply using ClickOnce. I have set the options to:
1) Sign the ClickOnce manifests (checked)
2) Sign the assembly (checked)
3) On the security tab: "Enable ClickOnce security settings "(checked) and "This is a full trust application" selected
4) On the "Publish" tab: "The application is available offline as well..." Selected
The qeustion is that, when I publish the application based on this settings and run the "Setup.exe" on a Windows 7 machine I have the exception: "Deployment
and application do not have matching security zones"
Any idea on how to solve this?
Below is the error log:
ERROR DETAILS
Following errors were detected during this operation.
* [28-02-2015 14:52:30] System.Deployment.Application.InvalidDeploymentException (Zone)
- Deployment and application do not have matching security zones.
- Source: System.Deployment
- Stack trace:
at System.Deployment.Application.DownloadManager.DownloadApplicationManifest(AssemblyManifest
deploymentManifest, String targetDir, Uri deploymentUri, IDownloadNotification notification, DownloadOptions options, Uri& appSourceUri, String& appManifestPath)
at System.Deployment.Application.DownloadManager.DownloadApplicationManifest(AssemblyManifest
deploymentManifest, String targetDir, Uri deploymentUri, Uri& appSourceUri, String& appManifestPath)
at System.Deployment.Application.ApplicationActivator.DownloadApplication(SubscriptionState
subState, ActivationDescription actDesc, Int64 transactionId, TempDirectory& downloadTemp)
at System.Deployment.Application.ApplicationActivator.InstallApplication(SubscriptionState&
subState, ActivationDescription actDesc)
at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri
activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object
state)
COMPONENT STORE TRANSACTION DETAILS
No transaction information is available.

Hello,
To clarify this issue, I would confirm with you the following tips.
>> 2) Sign the assembly (checked)
1. If you select the pfx file which is generated by Visual Studio for "Choose a strong name key file",
will it has the same result?
2. Where did you published your project? Local folder ,web server or any other?
3. If you create a simple sample with the same stesps, will it has the same issue? If so, you could share that sample with us.
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Auto-Fill Secure Zone Members' Information to a webform?

Hi, everyone:
I'm working with webforms in a secure zone and the system is insisting on having users enter their information - name & e-mail address. Since they've already provided this information when registering for the secure zone, I'd prefer to use a {module_firstname} etc. insert for their information rather than ask them to type it repeatedly. I've tried removing the input fields and replacing them with the tags, but this results in an error message. Is there any way to do this?
Thanks!
Linda

Hi Linda,
If customer is logged into a secure, the data can be pulled from the customer's info and can be populated in the form fields. Please refer to the following article : http://kb.worldsecuresystems.com/924/cpsid_92481.html
The above mentioned article has the steps to achieve this. If you still face the problem, please reply with the exact error message you get and your site's URL.
You can also contact support directly via Chat from http://helpx.adobe.com/contact.html and select Business catalyst from the dropdpwn or log a ticket.
Cheers,
Aishvarya Raj Rastogi

Is it possible to code a store in a secure zone so it acts like a POS system?

We have a small theatre and want to use Bc for our online store to sell tickets and we want to hear if it is possible to code a secure zone to the extent that we can use it as a POS system? We don't want to pay for more than one system and it will be a hassle to integrate a POS with Bc using an API.
If we can supply the theatre with guaranteed 24/7 internet, we should be able to use the system all the time and by coding the shop in a secure zone we don't have to log into the back end of the site to do sales. Everything should flow nicely in theory, right?

djinte wrote:
is it possible ta make a menu in idvd. ...
iDVD has its own forum, here:
https://discussions.apple.com/community/ilife/idvd
what you're looking for is 'chapters', don't hesitate to make use of iM & iDVD's built-in Help.
btw: no need to write extra-large ...

Are System-Generated Secure Zone Passwords Temporary?

Issue: Customers are not able to follow the link in their emails to get their secure zone password.
Guess: Is BC issuing temporary user ID's and passwords, if none are otherwise specified in the CRM record for that person?
1) Is that true?
2) If so, how can I turn it off?
Why? Because not everyone gets around to seeing that email within 24 or 48 hours (or however long the period might be).
Hope someone out there knows now that we can't just start a chat with Adobe.

Hi Dave,
No that is not true.
BC passwords are not sent. When you have a signup form you have a username and password field, that password is what they set it to.
Now there is an issue that with those fields in a form an email is sent out along with the auto responder or invoice in the case of eCommerce that tells them their password but also the option of reset.
This is the same email that is used when you trigger the reset notification for password in the admin.
You can supress the first time this comes out by adding a paramater to the form action.
BUT even if they reset you need to ensure the email is easy to understand and it is a reset of their password, not a tempory password etc and fomat it as you wish.
The reason a link will not work after 24 hours ish is because like other secure systems that link generated by the system has now expired and you would have to run "forgot password" again to reset it.
The link takes the person to a system page on the site to enter their new password.
You just need to sort your workflow from initial signup to them logging in so it is clear, presented well, easy to use and easy to follow.

How to use single web form for multiple secure zone signup?

I have multiple secure zones in my website. I want to sell membership of secure zones to users of my website. I want, users signup for multiple secure zone of their choice and submit payment. Is it possible if can you please explain a bit or refer me to an doc about it.
Thanks a lot for your time,

I realize this isn't likely, but do you know of a way to allow the user to select the secure zone to be registered (e.g. from a list of multiple secure zones or entering ID of one sz into a text input) from within a single web form? I wonder if this can be passed in through a parameter in the action URL or through a special system field.
Thanks

I can't find the Secure Zone in my Site-Manager.

I'm a creative cloud member and I can't find the Secure Zone in my Site-Manager. There are only Web-Formulars and System-E-Mails. What do I have to do?

Hi there, the creative cloud site you get is only a web basic plan. You do not have those features, you will need to upgrade if you want them.

Security Zones and portalapp.xml

On the page http://help.sap.com/saphelp_nw04/helpdata/en/25/85de55a94c4b5fa7a2d74e8ed201b0/content.htm
it says that the settings (security zone, permission) in the portalapp.xml defines who can access this application.
Then it says that PRT checks the users iView-permission and then optionally the security zone permission, depending on the setting of the parameter -Dcom.sap.nw.sz=true in the J2EE.
Question:
When this parameter is disabled (default), are the security zones just not checked when accessing an application throug an iView or also when they are accessed through direct URL?

Hi Manuel,
I just checked it against our SP12 installation, with the same component, which has the same settings as yours:
> it can be run by any authenticated user
This at least does not hold for our portal installation. Each access with the given URL, called by an authenticated user which does not have one of the admin roles set within the security zones, ends with:
Access denied (Object: com.sap.portal.system/security/sap.com/NetWeaver.Portal/high_safety/com.sap.portal.runtime.system.console/components/ClusterAdminConsole)
The application permissions do not play a role here, these are for the iView wizards, which applications are to be chosen.
So, double check the user you are testing with; maybe the version is buggy?
> In the Security-Zone-Permissions
> ara:/security/sap.com/NetWeaver.Portal/high_safety/com.sap.portal.runtime.system.console
Under components/ClusterAdminConsole the same settings are to be found? (I expect it, but just to be sure.)
Hope it helps
Detlev

Security Zone error.

I have a federated portal, i.e. producer - consumer relationship (7.0 sp18) and when I federate a BEx qry I'm getting a Security Zone error with the following message:
Caused by: com.sapportals.portal.pcd.gl.PermissionControlException: Access denied (Object(s): com.sap.portal.system/security/sap.com/NetWeaver.Portal/high_safety/com.sap.portal.runtime.system.console/components/default)
I did the following:
Go to System Administration -> Support.
Under the Area column select Portal Runtime. Scroll down to the JNDI Browsers section, and select Security Zones Browser. Drill down to sap.com/NetWeaver.Portal/high_safety/com.sap.portal.runtime.system.console/components/default.
I'm seeing "No service is bound to this secutiy zone"
I understand I need to go to System Administration -> Permissions,
Browse to Security Zones:
sap.com/NetWeaver.Portal/high_safety/com.sap.portal.runtime.system.console/components/default
and right-click -> Edit Permissions.
All I have to do is add end-user-read permissions is that correct?
I currenlty see just content_admin, super_admin, and system_admin all with End USer checked. Do I have to add my "Everyone" role as an assigned permission and ck End User?
Then when I go back to the Support Desk I see a service bound?
Mike

From what I am seeing I now understand that in my federated env I am generating a URL that exceeds 2083 characters. We are using IE Version 7.0.5730.13CO
I also understand that I am not having this issue when using Firefox.
These urls are getting generated when the users save a BEx qry to the BEx Portfolio or their My Portfolio.
The reason I was getting the security errors was the url's were getting chopped off and the users did not have access to those components.
Anyone implement a method to fix this issue?
MIke

Best practice for secure zone various access

I am setting up a new site with a secure zone.
There will be a secure zone. Once logged in, users will have access to search and browse medical articles/resources
This is how an example may go:
The admin user signs up Doctor XYZ to the secure zone.
The Doctor XYZ is a heart specialist, so he only gets access to web app items that are classified as "heart".
However, he may also be given access to other items, eg: "lung" items.
Or, even all items. It will vary from user to user.
Is there any way to separate areas within the secure zone and give access to those separate areas (without having to give access to individual items - which will be a pain because there will be hundreds of records; and also without having the user log out and log into another secure area)

my only issue with this is that I have no idea how to open up File Sharing to ONLY allow users who are connecting from the VPN
Simple - don't expose your server to the outside world.
As long as you're running on a NAT network behind some firewall or router that's filtering traffic, no external traffic can get to your server unless you setup port forwarding - this is the method used to run, say, a public web server where you tell the router/firewall to allow incoming traffic on port 80 to get to your server.
If you don't setup any port forwarding, no external traffic can get in.
There are additional steps you can take - such as running the software firewall built into Mac OS X to tell it to only accept network connections from the local network, but that's not necessary in most cases.
And 2. The best way to ensure secure AND encrypted file sharing via the server...
VPN should take care of most of your concerns - at least as far as the file server is concerned. I'd be more worried about what happens to the files once they leave the network - for example have you ensured that the remote user's local system is sufficiently secured so that no one can get the documents off his machine once they're downloaded?

Missing Entry in Security Zones

Hi all,
Im trying to build a User how "only" has access to the PAR-Uploader in the Portal (System Administration --> Support --> Support Desk --> ("Portal Anywhere" Admin Tools" -->) Administration Console.
My idea for a solution was to create a role with a delta-linked iView to the source iView (Portal Content --> Content provided by SAP --> Admin Interfaces --> Admin iView Templates --> Support Desk). After asigning the new role to my new User and logging in to the Portal, i can see the "overview" mask (System Administration --> Support --> Support Desk), but by calling the "Portal Runtime" (to upload the PAR) I will get an Execption.
In the NWA I found two:
Exception ID:07:46_20/03/09_0033_4057750
[EXCEPTION]
com.sapportals.portal.prt.runtime.PortalRuntimeException: Access is denied: com.sap.portal.support.desk.default - user: Deployment, Tester
     at com.sapportals.portal.prt.deployment.DeploymentManager.checkPermissions(DeploymentManager.java:2005)
     at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.refresh(PortalComponentContextItem.java:251)
     at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.getContext(PortalComponentContextItem.java:316)
     at com.sapportals.portal.prt.component.PortalComponentRequest.getComponentContext(PortalComponentRequest.java:387)
     at com.sapportals.portal.prt.connection.PortalRequest.getRootContext(PortalRequest.java:488)
     at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:607)
     at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: com.sapportals.portal.pcd.gl.PermissionControlException: Access denied (Object(s): com.sap.portal.system/security/sap.com/NetWeaver.Portal/high_safety/com.sap.portal.support.desk/components/default)
     at com.sapportals.portal.pcd.gl.PcdFilterContext.filterLookup(PcdFilterContext.java:422)
     at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1248)
     at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
     at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
     at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
     at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
     at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
     at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
     at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
     at com.sapportals.portal.pcd.gl.PcdProxyContext.proxyLookupLink(PcdProxyContext.java:1353)
     at com.sapportals.portal.pcd.gl.PcdProxyContext.proxyLookup(PcdProxyContext.java:1300)
     at com.sapportals.portal.pcd.gl.PcdProxyContext.lookup(PcdProxyContext.java:1067)
     at com.sapportals.portal.pcd.gl.PcdGlContext.lookup(PcdGlContext.java:68)
     at com.sapportals.portal.pcd.gl.PcdURLContext.lookup(PcdURLContext.java:238)
     at javax.naming.InitialContext.lookup(InitialContext.java:347)
     at com.sapportals.portal.prt.deployment.DeploymentManager.checkPermissions(DeploymentManager.java:2000)
     ... 26 more
and
07:46_20/03/09_0033_4057750
[EXCEPTION]
com.sapportals.portal.pcd.gl.PermissionControlException: Access denied (Object(s): com.sap.portal.system/security/sap.com/NetWeaver.Portal/high_safety/com.sap.portal.support.desk/components/default)
     at com.sapportals.portal.pcd.gl.PcdFilterContext.filterLookup(PcdFilterContext.java:422)
     at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1248)
     at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
     at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
     at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
     at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
     at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
     at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
     at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
     at com.sapportals.portal.pcd.gl.PcdProxyContext.proxyLookupLink(PcdProxyContext.java:1353)
     at com.sapportals.portal.pcd.gl.PcdProxyContext.proxyLookup(PcdProxyContext.java:1300)
     at com.sapportals.portal.pcd.gl.PcdProxyContext.lookup(PcdProxyContext.java:1067)
     at com.sapportals.portal.pcd.gl.PcdGlContext.lookup(PcdGlContext.java:68)
     at com.sapportals.portal.pcd.gl.PcdURLContext.lookup(PcdURLContext.java:238)
     at javax.naming.InitialContext.lookup(InitialContext.java:347)
     at com.sapportals.portal.prt.deployment.DeploymentManager.checkPermissions(DeploymentManager.java:2000)
     at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.refresh(PortalComponentContextItem.java:251)
     at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.getContext(PortalComponentContextItem.java:316)
     at com.sapportals.portal.prt.component.PortalComponentRequest.getComponentContext(PortalComponentRequest.java:387)
     at com.sapportals.portal.prt.connection.PortalRequest.getRootContext(PortalRequest.java:488)
     at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:607)
     at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
With this exeptions I'd take a look to the security zone and -as not expected- the entry "com.sap.portal.system/security/sap.com/NetWeaver.Portal/high_safety/com.sap.portal.support.desk" is missing".
And Ideas to solve my problem (allow a User to access the PAR-Uploader) or to solve the missing security zone entry?

Hi Koti,
thanks for your reply, but the situation is that there is NO entry for the support desk.
My suggest path is (at permissions) exactly as yours:
- Security Zones
-- sap.com
--- NetWaver.Portal
high_safety
com.sap.portal.support.desk
As descriped: there is no entry like suggested - also nothing similar (for the fact, the title is not equal to the ID).
PS: We are using SPS14

WebApps (Liquid) Secure Zone Help

Hi BC Team,
Hoping someone can help me with this... I am developing a Secured Team Portal for a client of mine. Unfortunately I haven't had a chance to delve deep into Liquid yet, so, sort of looking for some help here : ). Here is what I want to achieve:
A customer is assigned to a particular secure zone (via my client, securing the customer to a secure zone that relates to them). This customer would only see the web app relates to them only. More than one customer may have access to the same web app item.
Assuming we assign these web app items to a Secure Zone, is there anyway to achieve this easily with Liquid? If so, any tips and tricks?
Thanks in advance,
Aaron

Hi Aaron,
Ownership in the system of a web app item is limited to 1 person, you can not add to that, change that in any form.
You could have a custom field for a list of peoples names and run a liquid check to see if that name was the same as the person logged in (setting this with javascript on the web app item submission) BUT this is open to issues....
1. If someone made an admin entry and forgot to add or did not put the correct names down.
2. Liquid has a scope limit of only 500 items. You can run if statements, your own collection etc but it effectively only works within that 500 item scope. This is a major issue for me and I am trying to get even feedback from BC on this but they avoiding it at the moment

Upgrading secure zone

Hi all,
I am looking to create a free trial secure zone and let users upgrade to a paid secure zone after 2 months.
When i pre-populate the fields with their username and email (the user will be logged into their trial account to access this form), when they submit the form, does business catalyst automatically add the new secure zone to the existing account, such that the account that the current user has will be subscribed to 2 secure zones?
Also, is it possible to program it such that the system will automatically send a notification via email when the user's subscription is about to expire? Like 2 weeks in advance,,

Hi,
Most likely you are under site plan webBasic or webBasic+ which does not include Secure Zone features.
For a breakdown of features per plan please view here. -> http://helpx.adobe.com/business-catalyst/kb/detailed-plan-breakdown.html
For information on how to upgrade your Muse site you may want to visit this thread below.
- http://forums.adobe.com/message/4827272#4827272
Hope this helps!
-Sidney

Property editor, Permission editor and security zone

Could anyone let me know what different between <u>Property editor, Permission editor and security zone</u> when we build the new role in portal and have to go through these three for setting up. Could you compare them with creating new role in R/3 system?
Thank you so much and sorry to bother you guys.

Hi,
Property editor is the editor which shows a list of properties of any pcd object like iView property or page property etc. Using this, u can edit the properties of the pcd object.
http://help.sap.com/saphelp_nw2004s/helpdata/en/9e/7d9713087311d7b84600047582c9f7/frameset.htm
Permission editor is the editor where u can change the permission level for particular application or portal content objects like read/ write permission, end user permission etc. So using this, u can set permissions for different users to access different pcd objects.
http://help.sap.com/saphelp_nw2004s/helpdata/en/5b/0fab1b76984ed0944d5c732cfad1b2/frameset.htm
Security zone mentions the level of portal security like low, high etc.
http://help.sap.com/saphelp_nw2004s/helpdata/en/25/85de55a94c4b5fa7a2d74e8ed201b0/frameset.htm
Regards,
Vijai

How to delete a Security Zone?

Hello,
I've deployed a certain PAR file with a certain Security Zone:
<property name="SecurityZone" value="roy.test.TestApp/DefaultSecurity">
</property>
Now I can see this security under System Config -> Permissions -> Security Zones as I should. My question is: In case I would like to delete it how do I do it?
Roy

Hi Roy,
It is a page that shows on one page all the portal components installed on your portal.
Access the page from the URL http://<server>:<port>/irj/servlet/prt/portal/prtroot/PortalAnywhere.Go
From this you can see all the components, each displayed with a button to run it.
As I mentioned, you do not really need this page to run the SecurityZonesChecker. You can just use the URL http://<server>:<port>/irj/servlet/prt/portal/prtroot/com.sap.portal.runtime.system.console.SecurityZonesChecker.
For the above links, make sure to put in your server name and port number.
Did you run the SecurityZonesChecker? Does it do what you need?
Hope all this helps.
Daniel

Secure zone art proofing system

Similar Messages

Maybe you are looking for