Security Database error with cpgenkey

I'm trying to enable monitoring of the Common Agent Container as described at <http://docs.sun.com/app/docs/doc/819-5081/gdang?l=en&a=view>
I am receiving an error at Step 5 ("Generate your key") and there appears to be no troubleshooting tips in the docs for this:
/opt/sun/dsee6/SUNWmfwk/bin/cpgenkey -n cacao -p /etc/opt/SUNWmfwk/config/security/password.cacao
ERROR: cannot sign agent certificate with CA.
bin_certutil: function failed: security library: bad database.
Does 'cpgenkey' need to use (be pointed to) the cert8.db/key files created and used by the Directory Server instance?
Any tips or advice would be most appreciated!
Rob Chevalier

Does anyone know how to config/start the snmp subagent for DSEE 6.3?
<http://docs.sun.com/app/docs/doc/820-2762/compare-commands?l=en&a=view> says that the 'ns-ldapagt' command in deprecated in 6.3 and refers to the <http://docs.sun.com/app/docs/doc/820-2763/ftzae?l=en&a=view>, which simply says this:
1: Enable the Java ES Monitoring Framework plug-in.
Use the procedure Enabling Java ES MF Monitoring. This procedure also enables the Common Agent Container, which is part of the Java ES MF.
(Done)
2: Access the SNMP-managed objects defined by the MIB and exposed through the agents.
The tasks required for this step are entirely dependent on your SNMP management system. See your SNMP management system documentation for instructions.
So, I'm on Solaris 10 which I believe is using net-SNMP. I'm looking for good documentation on how to setup the Directory Server SNMP subagent within Solaris 10 net-SNMP. Googling for this is like panning for gold. If anyone knows of good documentation links, I'd be very appreciative. Or if I'm waaaay off, could someone please point me to shore.
Cheers,
-r

Similar Messages

" Could not create SSL/TLS secure channel " error with Webtest of VS 2013

hello !
I want to test my mvc web project with webtest tools of VS 2013 and I Record a test with Internet Explorer
but when I run test appear this error for me at result of test run : Could not create SSL/TLS secure channel
for some requested url , but i watch requests in developer tools of chrome browser and I don't see this error.
i have ssl certificate on the server.
thanks

Hi ArashGhf,
>>but when I run test appear this error for me at result of test run : Could not create SSL/TLS secure channel
Based on the error message, it looks like it might be a problem with your certificate not being set up correctly for web performance test.
Therefore, I suggest you could refer the autom8dTest's suggestion to convert the Web performance test to coded web performance test and then add the WebTestRequest ClientCertificates property to the ClientCertificates collection after the request
is set up.
For more information, please refer to it.
https://social.msdn.microsoft.com/Forums/en-US/49e8d188-90c3-4d72-b387-10b1d1adc4a0/ssl-in-webtests-request-failed?forum=vstswebtest
Hope it help you!
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Security Zone error.

I have a federated portal, i.e. producer - consumer relationship (7.0 sp18) and when I federate a BEx qry I'm getting a Security Zone error with the following message:
Caused by: com.sapportals.portal.pcd.gl.PermissionControlException: Access denied (Object(s): com.sap.portal.system/security/sap.com/NetWeaver.Portal/high_safety/com.sap.portal.runtime.system.console/components/default)
I did the following:
Go to System Administration -> Support.
Under the Area column select Portal Runtime. Scroll down to the JNDI Browsers section, and select Security Zones Browser. Drill down to sap.com/NetWeaver.Portal/high_safety/com.sap.portal.runtime.system.console/components/default.
I'm seeing "No service is bound to this secutiy zone"
I understand I need to go to System Administration -> Permissions,
Browse to Security Zones:
sap.com/NetWeaver.Portal/high_safety/com.sap.portal.runtime.system.console/components/default
and right-click -> Edit Permissions.
All I have to do is add end-user-read permissions is that correct?
I currenlty see just content_admin, super_admin, and system_admin all with End USer checked. Do I have to add my "Everyone" role as an assigned permission and ck End User?
Then when I go back to the Support Desk I see a service bound?
Mike

From what I am seeing I now understand that in my federated env I am generating a URL that exceeds 2083 characters. We are using IE Version 7.0.5730.13CO
I also understand that I am not having this issue when using Firefox.
These urls are getting generated when the users save a BEx qry to the BEx Portfolio or their My Portfolio.
The reason I was getting the security errors was the url's were getting chopped off and the users did not have access to those components.
Anyone implement a method to fix this issue?
MIke

Migrate SQL 2008 Analysis database to 2012 AS database along with data level security defined in current production cube

I want to migrate Analysis Services 2008 database to 2012 AS database along with data level security defined in current production cube
Note: Only Production environment have security, while no security is defined in development environment
Potential Approach:
1 - Using Synchronization Wizard: Gives me error : "The OLAP element at line1 can not appear under envelope......" and this is because Synchrinzation works only for same version
and in my case, there are different versions of SQL (SQL 2008 and 2012)
2 - Using Visual studio conversion wizard - Convert SQL 2008 AS project to 2012 and then process cube, so I can get the cube working but then how can I get data level security since 100's of data level security is defined in production Cube, so how can I
migrate that across
3 - Script out XMLA and deploy cube - But then again having issues with how can i script SSAS security
4 - Would taking backup of SSAS 2008 database and restore to SSAS 2012 will help ?
Any suggestions would be appreciated
Thanks,
Mihir

Hi Mihir,
According to your description, you want to migrate the SQL Server Analysis Services (SSAS) 2008 database which have some security setting with it to SSAS 2012, right? We can migrate existing Analysis Services databases either during Setup, by upgrading an
existing instance of Analysis Services, or after Setup, by running the Migration Wizard. Generally, when migrating a database to another server, all the setting will be migrated. So in your scenario, you can refer to the steps on the links below to migrate
your SSAS database.
How to: Migrate Analysis Services Databases
Migrating Existing Analysis Services Databases
Regards,
Charlie Liao
TechNet Community Support

Load data error: Database selection with invalid cursor (sm21)

hi experts,
when I execute processchar, it occur some system error:
"Database selection with invalid cursor ",
"Documentation for system log message BY 7 :
The database interface was called by a cursor (in a FETCH or CLOSE
cursor operation) that is not flagged as opened. This can occur if a
COMMIT or ROLLBACK was executed within a SELECT loop (which closes all
opened cursors), followed by another attempt to access the cursor (for
example, the next time the loop is executed). "
the error msg occur when apply bw support package19.
data from DSO to CUBE, Transferred Recodes is not zero, but Added Recodes is zero.
Request status always yellow, process is running.
current sys info: BI7 and BW19, BASIS17,PI_BASIS17, the database is oracle10g R2.
thanks for your help.

I have solved this issue, The Oracle checkpoint not complete.
thanks,
xwu.

Processchar occur error: Database selection with invalid cursor (sm21)

hi,
when I execute processchar, it occur some system error:
"Database selection with invalid cursor ",
"Documentation for system log message BY 7 :
The database interface was called by a cursor (in a FETCH or CLOSE
cursor operation) that is not flagged as opened. This can occur if a
COMMIT or ROLLBACK was executed within a SELECT loop (which closes all
opened cursors), followed by another attempt to access the cursor (for
example, the next time the loop is executed). "
the error msg occur when apply bw support package19.
data from DSO to CUBE, Transferred Recodes is not zero, but Added Recodes is zero.
Request status always yellow, process is running.
current sys info: BI7 and BW19, BASIS17,PI_BASIS17, the database is oracle10g R2.
thanks for your help.

I have solved this issue , The Oracle checkpoint is not complete.
thanks,
xwu.

Database selection with Invalid Cursor error in RSDRI_INFOPROV_READ

Hi Everyone.
I am using RSDRI_INFOPROV_READ Function module for reading data from a multiprovider.
Logic of the code is as following
while <more data>
CALL RSDRI_INFOPROV_READ reading data in E_T_DATA
Append lines of E_T_DATA to EO_T_DATA.
If total lines of data in EO_T_DATA > 200000
<save EO_T_DATA in a file using GUI_DOWNLOAD>
<clear EO_T_DATA>
EndIF
EndWhile.
As soon as number of record exceed 200000 first file is saved, but after that next data call results in error.
Error says "Database selection with invalid cursor".
I suspect that this because of call to FM GUI_DOWNLOAD. While calling this FM after RSDRI_INFOPROV_READ causes system to commit and again the cursor is tried to open in next call casuing it to fail.
But it is imperative for me to save data in file at regular intervals as data volume is huge.
Any pointers in this direction will be helpful.

Hi Everyone.
I am using RSDRI_INFOPROV_READ Function module for reading data from a multiprovider.
Logic of the code is as following
while <more data>
CALL RSDRI_INFOPROV_READ reading data in E_T_DATA
Append lines of E_T_DATA to EO_T_DATA.
If total lines of data in EO_T_DATA > 200000
<save EO_T_DATA in a file using GUI_DOWNLOAD>
<clear EO_T_DATA>
EndIF
EndWhile.
As soon as number of record exceed 200000 first file is saved, but after that next data call results in error.
Error says "Database selection with invalid cursor".
I suspect that this because of call to FM GUI_DOWNLOAD. While calling this FM after RSDRI_INFOPROV_READ causes system to commit and again the cursor is tried to open in next call casuing it to fail.
But it is imperative for me to save data in file at regular intervals as data volume is huge.
Any pointers in this direction will be helpful.

ARM approval error after upgrading to SP14: Database error while using the secure store.

Dear GRC experts,
After upgrading GRC 10 to SP14, assigning manual passwords during the approval of a request, the approval process is failing.
Here is the scenario; your advice will be appreciated.
Task: Manually assign passwords to multiple systems contained in the request
Where: On the access request, go to “User System Details” tab
Issue: After approving/submitting the request, the error “Database error while using the secure store” is generated
Logs: Nothing on transactions SLG1 or ST22; however ST11 shows the error attached below:
This is the failed approval of the request:
Other scenarios executed as a workaround, and passed the password assignment this time:
The approval will work if only one password is assigned to any of the given systems. The rest of the systems get an auto-generated
password.
ARM also accepts multiple passwords when the requestor assigns passwords on the “User System Details” prior submitting a
request. The GRC admin can approve once reached for system approval.
AS FYI, “Confirm Password” is only required when creating the request but not on any other stage.
System information:
-Netweaver 7
-GRCFND_A SP14
-GRCPINW SP13
Regards,
Gustavo

SAP just delivered a note to fix this issue. The number is 2022294.

Lync 2013 Error - Certificate could not be published in the database associated with User Services Cluster

Hi Lync gurus,
I have a weird issue:
Just installed a Lync Standard 2013.
Everything works except I keep getting this error in Log: every 30 minute or so.
First an Error: Event 47067
A server did not respond to HTTP request
Server lyncserver.domain.local did not respond to HTTP request PublishCertRequest targeted at
https://lyncserver.domain.local:444/LiveServer/UserPinService.
Cause: Server might be down or the network path between servers might not be properly configured.
Resolution:
Please ensure that the server can be connected on the target port using telnet and then re-try.
Then I get a Warning: Event 47068
GetAndPublish web service failed.
Certificate could not be published in the database associated with User Services Cluster [lyncserver.domain.local ]. Request Details - Entity: [[email protected]], Device Id: [6BB30A3E-2923-553A-8E5F-0B2FB2CEA330], Authenticated User: [sip:[email protected]].
Additional Context: [Publish_Failure: OtherFailure;HttpNoResponse:"lyncserver.domain.local "]
Cause: This could be due to network connectivity issues with the remote server, or because the database is down.
Resolution:
Please ensure that the user services is reachable and the database is up and running.
Thanks for any help

Please check you can telnet port 443 and port 444 on Lync Front End Serve from client.
Try to regenerate a new certificate for Lync Front End Server.
Check all the services on Lync Front End Server are started.
Check the option “Enable all purposes for this certificate” is checked for the trusted root CA certificate.
For the detailed steps:
Run MMC--Add\Remove Snap-ins--certificates--Local Computer--Trusted Root Certificate Authorities--Certificates, find the Root CA certificate you installed--Properties--General, check the "Enable all purposes for this certificate".
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error in /tmp/applianceagent/scripts/Database.sh: Start database failed with exit code 2

Hello
I have set up the Demo appliance landscape for the openSAP course "Introduction to SAP Fiori UX", on AWS.
The frontend machine is OK, but the configuration and startup of the server machine has failed for some reason. When logging in with ssh to the server, this message is presented:
The Appliance Agent detected an error and terminated.
When asked, please provide the file /tmp/applianceagent_20141002-145658.tar.bz2.
Note that a restrictive iptables based firewall is still active.
I have attached the file (had to add .txt to the name to circumvent file type restrictions).
I noticed that the appliancedeploy.log ended with these lines:
Start database Execute /usr/sap/hostctrl/exe/sapcontrol -nr 02 -function StartWait 3600 20
02.10.2014 13:56:58
Start
OK
02.10.2014 14:56:58
StartWait
FAIL: Timeout
error in /tmp/applianceagent/scripts/Database.sh: Start database failed with exit code 2
Notice the 1 hour jump in time, and then the timeout error message.
Do any of you have any idea what could be causing this, and how to fix it?
Please let me know if you need any further information.
Best regards,
Bo

Hi Hannes.
Trying to create and activate a new instance (version 5 of the Fiori appliance), I first got this message in the CAL instance overview list:
Instance Operation Failed
Operation Start failed on step Start start VAs with message: Start failed for VM SAP Server due to Amazon Web Services issue : AMAZON : The snapshot 'snap-c779ff64' does not exist.
Then I terminated the instance and tried over again. And this time the deployment worked - I have a running server, which responds to the SAP GUI, and shows the Fiori web page.
Thanks a lot for your quick help.
Best regards,
Bo

Error with calendar database: Program version 4.2 doesn't match enviroment

hi!
im instaling jes in a windows 2000 machine and i get this error when trying to start calendar:
[21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Information: Log created (1156170958)
[21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Notice: Sun Java System Calendar Server 6 2005Q4 (built Dec 27 2005) csadmind starting up
[21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Notice: csadmind attempting to open Counters Database
[21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Notice: csadmind successfully opened the Counters Database
[21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Notice: HTTP Module is refreshing
[21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Notice: csadmind is refreshing
[21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Notice: csadmind is refreshed
[21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Notice: HTTP Module has refreshed
[21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Notice: csadmind argc=1 argv[0]=C:\Sun\CalendarServer\bin\csadmind.exe
[21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Notice: csadmind attempting to open Calendar Database
[21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Error: caldb: Error with calendar database: Program version 4.2 doesn't match environment version
[21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Error: caldb: caldb_InitializeEnvironment: dbenv->open returned 22
[21/Aug/2006:16:35:58 +0200] jes csadmind[1752]: General Critical: Fatal error 70: Cannot open calendar database
anyone have faced same problem?
thanks in advance

Hi Vyacheslav,
its wierd that when I run db_stat on windows, for my environment, it works.... I installed Berkeley DB XML 2.4.16 from a self extracting package.
When I tried running from my Linux box, the error message appear... The native library on my Linux box was built from the zip package dbxml-2.4.16.zip
Arent they the same?
Thanks!

REP-56071: Security check failed with error message: Error code30009 - Gene

REP-56071: Security check failed with error message: Error code30009 - Generic access check failed..
Hello,
I am also receiving the above error - these reports are deployed on our Portal - to which all registered SSO users should have access to.
one more thing...
We obtain the error only when execute under some "load", example: 15 reports running simultaneously.
Tx,
Diego.

I am also facing this problem - I've deployed the reports on the Portal and authenticated users can access the reports.
The problem is that when any authenticated user tries to access the report, on his very first access this error is shown.
REP-56071: Security check failed with error message: Error code30009 - Generic access check failed..
But after the user click on the Personalize link of the portlet and specify the parameters values(which are empty initially) then report runs fine.
Plz let me know the solution as no user will like to see this error message for the first time he opens the report.
Regards.

Checkin error with sql server as backend database

Hello,
I get regulary the following error messages (attached as screenshot) when I'm try to checkin my current model.
The message states, that my database is in single user mode, but this isn't the case. I checked the many times.
My repository database is a Microsoft SQL Server 2008 SP3 64 Bit Enterprise Edition. Are there any known issues with this database?
With PowerDesigner 16.1 I didn't have such issues.
kind regards
Christian

Hi Christian,
The error message is not referring to your database.
Within PowerDesigner, PD, some 'Unexpected Exceptions' are not really an issue (a true exception).
Here is an explanation for the error you are encountering:
PD has found that something potentially wrong happened with an action selection in the merge dialog. A single user has been the only one to work on the model, but the actions were not all selected by default (which is unexpected).
So PD decided by itself to select all the actions anyway.
The PD developers created this dialog to be a warning about this condition in order for it to be analyzed further if required.
Using the Comparison Legend from the Merge window:
[-+] object present only in model in the left pane (deletion for the merge dialog)
The action in question is now selected:
[-+]<Trigger> CompoundDeleteTrigger _adm_prepare_load
If you would like to pursue this further, a copy of the local model and a copy of the model already in the repository would be needed for review.
Regards,
Anthony

Start ALert Router failed with Database Error -444 SQLstate 42724

HI,
When I create a stored procedure SAPCL and follow the subsequents steps & Verify SAPCL is running, I get the message SAPCL stored procedure has been successfully installed.
Then when I Load the ALert Router(SUccessful) and start the ALert Router, I get the following message.
Database error -444 at EXE
> [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -444, ERROR: USER
> PROGRAM SAPCL COULD NOT BE FOUND
> DSNT418I SQLSTATE = 42724 SQLSTATE
> RETURN CODE
> DSNT415I SQLERRP = DSNX9CAC SQL
> PROCEDURE DETECTING ERROR
> DSNT416I SQLERRD = 0 0 0 -1 0
> 0 SQL DIAGNOSTIC INFORMATION
> DSNT416I SQLERRD = X'00000000'
> X'00000000' X'00000000' X'FFFFFFFF' X'00000000'
> X'00000000' SQL DIAGNOSTIC INFORMATION
Can you please let me know a few pointers in this regard.

Hi,
ERROR => CONNECT failed with sql error '12154'
[dbsloci.c 10704] B ***LOG BV3=> severe db error 12154 ; work process is stopped
[dbsh#2 @ 1199] [dbsh 1199 ] B ***LOG BY2=> sql error 12154 performing CON [dblink#3 @ 431] [dblink 0431 ] B ***LOG BY0=> ORA-12154: TNS:could not resolve the connect identifier specified
Make a connectivity test with: "R3trans -d" and supply trans.log along with dev_w0 and dev_w1 traces.
Please refer Note 443867 - ORA-12154 Collective SAP note and correct your TNSNAME.ora and LISTENER.ORA entries.
Also see Note 34479 - Collective note for problems with SQL-Net V2 ORACLE.
Regards,
Bhavik g. Shroff

Websites Displaying Content with Security Certificate Errors

Can anyone explain what those yellow banners on the top of the screen that say "Internet Explorer blocks websites displaying content with security certificate errors, etc." mean and why they keep you our of certain websites and how you can get rid of them? (Sorry for the run-on sentence/question.)
Thank you!

LadyMac wrote:
Can anyone explain what those yellow banners on the top of the screen that say "Internet Explorer blocks websites displaying content with security certificate errors, etc." mean and why they keep you our of certain websites and how you can get rid of them? (Sorry for the run-on sentence/question.)
Thank you!
It means there is a problem with the sites security certificate.
There should be a "Continue to this website (not recommended)" message. I would not recommend doing that unless it is a site you know and trust.
In IE10 you can not disable that feature.
The following link will provide more information.
http://windows.microsoft.com/en-us/windows-vista/about-certificate-errors

Security Database error with cpgenkey

Similar Messages

Maybe you are looking for