Security Setting in Manage Dynamic Heirarchy

Dear All:
I am using BPC 7.5 SP 03, and doing security setting. I would like to let users to maintain ownerhsip by Manage Dynamic Hiararchy. Now, I already include EditDynamicHierarchy in Task Profile, however, the users with such profile can only open the interface, and they can't do any maintenance. Does anyone know how to do this setting?
BRs,
Fred Cheng

In doing some testing, I found that Portal can only display names of all of the users in a group if there are less than 100 users. Any more than that and it shows the message posted above.
Does anyone have the answer to why this happens or is it just another quirk in this wonderful program?

Similar Messages

How to Export local security setting all filed name & value against filed.

HI all,
I am trying to export local security setting from local policy using bellow scrip. but it is showing only these are configured. I need expert help which allowed me to export all filed with value where it is configure or not. Please give me.
$output=@()
$temp = "c:\"
$file = "$temp\privs.txt"
[string] $readableNames
$process = [diagnostics.process]::Start("secedit.exe", "/export /cfg $file /areas USER_RIGHTS")
$process.WaitForExit()
$in = get-content $file
foreach ($line in $in) {
if ($line.StartsWith("Se")) {
$privilege = $line.substring(0,$line.IndexOf("=") - 1)
switch ($privilege){
"SeCreateTokenPrivilege " {$privilege = "Create a token object"}
"SeAssignPrimaryTokenPrivilege" {$privilege = "Replace a process-level token"}
"SeLockMemoryPrivilege" {$privilege = "Lock pages in memory"}
"SeIncreaseQuotaPrivilege" {$privilege = "Adjust memory quotas for a process"}
"SeUnsolicitedInputPrivilege" {$privilege = "Load and unload device drivers"}
"SeMachineAccountPrivilege" {$privilege = "Add workstations to domain"}
"SeTcbPrivilege" {$privilege = "Act as part of the operating system"}
"SeSecurityPrivilege" {$privilege = "Manage auditing and the security log"}
"SeTakeOwnershipPrivilege" {$privilege = "Take ownership of files or other objects"}
"SeLoadDriverPrivilege" {$privilege = "Load and unload device drivers"}
"SeSystemProfilePrivilege" {$privilege = "Profile system performance"}
"SeSystemtimePrivilege" {$privilege = "Change the system time"}
"SeProfileSingleProcessPrivilege" {$privilege = "Profile single process"}
"SeCreatePagefilePrivilege" {$privilege = "Create a pagefile"}
"SeCreatePermanentPrivilege" {$privilege = "Create permanent shared objects"}
"SeBackupPrivilege" {$privilege = "Back up files and directories"}
"SeRestorePrivilege" {$privilege = "Restore files and directories"}
"SeShutdownPrivilege" {$privilege = "Shut down the system"}
"SeDebugPrivilege" {$privilege = "Debug programs"}
"SeAuditPrivilege" {$privilege = "Generate security audit"}
"SeSystemEnvironmentPrivilege" {$privilege = "Modify firmware environment values"}
"SeChangeNotifyPrivilege" {$privilege = "Bypass traverse checking"}
"SeRemoteShutdownPrivilege" {$privilege = "Force shutdown from a remote system"}
"SeUndockPrivilege" {$privilege = "Remove computer from docking station"}
"SeSyncAgentPrivilege" {$privilege = "Synchronize directory service data"}
"SeEnableDelegationPrivilege" {$privilege = "Enable computer and user accounts to be trusted for delegation"}
"SeManageVolumePrivilege" {$privilege = "Manage the files on a volume"}
"SeImpersonatePrivilege" {$privilege = "Impersonate a client after authentication"}
"SeCreateGlobalPrivilege" {$privilege = "Create global objects"}
"SeTrustedCredManAccessPrivilege" {$privilege = "Access Credential Manager as a trusted caller"}
"SeRelabelPrivilege" {$privilege = "Modify an object label"}
"SeIncreaseWorkingSetPrivilege" {$privilege = "Increase a process working set"}
"SeTimeZonePrivilege" {$privilege = "Change the time zone"}
"SeCreateSymbolicLinkPrivilege" {$privilege = "Create symbolic links"}
"SeDenyInteractiveLogonRight" {$privilege = "Deny local logon"}
"SeRemoteInteractiveLogonRight" {$privilege = "Allow logon through Terminal Services"}
"SeServiceLogonRight" {$privilege = "Logon as a service"}
"SeIncreaseBasePriorityPrivilege" {$privilege = "Increase scheduling priority"}
"SeBatchLogonRight" {$privilege = "Log on as a batch job"}
"SeInteractiveLogonRight" {$privilege = "Log on locally"}
"SeDenyNetworkLogonRight" {$privilege = "Deny Access to this computer from the network"}
"SeNetworkLogonRight" {$privilege = "Access this Computer from the Network"}
$sids = $line.substring($line.IndexOf("=") + 1,$line.Length - ($line.IndexOf("=") + 1))
$sids = $sids.Trim() -split ","
$readableNames = ""
foreach ($str in $sids){
$str = $str.substring(1)
$sid = new-object System.Security.Principal.SecurityIdentifier($str)
$readableName = $sid.Translate([System.Security.Principal.NTAccount])
$readableNames = $readableNames + $readableName.Value + ", "
$output += New-Object PSObject -Property @{
privilege = $privilege
readableNames = $readableNames.substring(0,($readableNames.Length - 1))
#else = $line."property"
$output

As an alternate approach wee can preset the hash and just update it. This version also deal with trapping the errors.
function Get-UserRights{
Param(
[string]$tempfile="$env:TEMP\secedit.ini"
$p=Start-Process 'secedit.exe' -ArgumentList "/export /cfg $tempfile /areas USER_RIGHTS" -NoNewWindow -Wait -PassThru
if($p.ExitCode -ne 0){
Write-Error "SECEDIT exited with error:$($p.ExitCode)"
return
$selines=get-content $tempfile|?{$_ -match '^Se'}
Remove-Item $tempfile -EA 0
$dct=$selines | ConvertFrom-StringData
$hash=@{
SeCreateTokenPrivilege =$null
SeAssignPrimaryTokenPrivilege=$null
SeLockMemoryPrivilege=$null
SeIncreaseQuotaPrivilege=$null
SeUnsolicitedInputPrivilege=$null
SeMachineAccountPrivilege=$null
SeTcbPrivilege=$null
SeSecurityPrivilege=$null
SeTakeOwnershipPrivilege=$null
SeLoadDriverPrivilege=$null
SeSystemProfilePrivilege=$null
SeSystemtimePrivilege=$null
SeProfileSingleProcessPrivilege=$null
SeCreatePagefilePrivilege=$null
SeCreatePermanentPrivilege=$null
SeBackupPrivilege=$null
SeRestorePrivilege=$null
SeShutdownPrivilege=$null
SeDebugPrivilege=$null
SeAuditPrivilege=$null
SeSystemEnvironmentPrivilege=$null
SeChangeNotifyPrivilege=$null
SeRemoteShutdownPrivilege=$null
SeUndockPrivilege=$null
SeSyncAgentPrivilege=$null
SeEnableDelegationPrivilege=$null
SeManageVolumePrivilege=$null
SeImpersonatePrivilege=$null
SeCreateGlobalPrivilege=$null
SeTrustedCredManAccessPrivilege=$null
SeRelabelPrivilege=$null
SeIncreaseWorkingSetPrivilege=$null
SeTimeZonePrivilege=$null
SeCreateSymbolicLinkPrivilege=$null
SeDenyInteractiveLogonRight=$null
SeRemoteInteractiveLogonRight=$null
SeServiceLogonRight=$null
SeIncreaseBasePriorityPrivilege=$null
SeBatchLogonRight=$null
SeInteractiveLogonRight=$null
SeDenyNetworkLogonRight=$null
SeNetworkLogonRight=$null
for($i=0;$i -lt $dct.Count;$i++){
$hash[$dct.keys[$i]]=$dct.Values[$i].Split(',')
$privileges=New-Object PsObject -Property $hash
$privileges
Get-UserRights
A full version would be pipelined and remoted or, perhaps use a workflow to access remote machines in parallel.
¯\_(ツ)_/¯

I forgot my security questions and I have a different email address but it's not updated to my Apple ID how can I change my security setting and how to rescue my Apple ID?

I forgot my security questions and I have a different email address but it's not updated to my Apple ID how can I change my security setting and how to rescue my Apple ID?

Alternatives for Help Resetting Security Questions and Rescue Mail
     1. Apple ID- All about Apple ID security questions.
     2. Rescue email address and how to reset Apple ID security questions
     3. Apple ID- Contacting Apple for help with Apple ID account security.
     4. Fill out and submit this form. Select the topic, Account Security.
     5. Call Apple Customer Service: Contacting Apple for support in your
          country and ask to speak to Account Security.
How to Manage your Apple ID: Manage My Apple ID

How to find solution for avoiding WARNING J2EE SECUR-00100 ********** user-manager (see application/server descriptors) will no longer be supported in the next release of this product

HI All,
We are using Oc4j version 10g 10.1.3 , and while starting conatiner getting below warning , let me know if anyone have solution for this,.
14/01/10 01:01:29 ********** user-manager (see application/server descriptors) will no longer be supported in the next release of this product!
Please take the appropriate actions to migrate to an alternative strategy! **********
2014-01-10 01:01:29.833 WARNING J2EE SECUR-00100 ********** user-manager (see application/server descriptors) will no longer be supported in the next release
of this product!

I just checked my BIOS and my current setting is set at IDE although it also mentions that the default should be AHCI. Currently I have a dual boot of Windows 7 (need it for Tax software) and Arch
So I guess, when I get the new HDD, I will first set it to AHCI and then install the OSes on it. See if NCQ helps any, and if not I will turn it back and re-install (if I have to). I am planning to have Windows only in virtualbox in the new drive.
Anyhoo, while I was in the BIOS I found two things which I had questions about :
1) Under Onboard Devices --> Integrated NIC , my setting is currently set at "On w/PXE" and it says the default should be just "On". Would it be ok to change it back to On since its a single machine and its not booting an OS on any server. I just don't want to have to re-install anything now since I will be doing that in the new HDD.
2) How would I know whether my BIOS would support a 64 bit OS in Virtualbox? I checked some setting under Virtualization, but they weren't very clear.
I will edit this post and let you know exactly what settings were present under the Virtualization sub-section.

What will happen if clicked on the generate key in the security setting of SLD in SAP B1

Hi
I clicked on the generate dynamic key in the security setting of SLD in SAP B1, now when i am trying to open companies , it is asking for update , how can i reset it to previous step.

Hi Isaac Kalii,
Can you please tell me the database names that i need to restore or i need to restore all the databases.
Thanks

Installing Security and Compliance Manager on Windows 8.1

Hi
I am trying to install Security and Compliance Manager on my Windows 8.1 workstation. The install is trying to install SQL Express 2008 which seems to not be compatible with Windows 8.1 and that is were the install ends.
I tried installing SQL Express 2012 and then running the install but it looks like the database is not installed.
Is there a new version of Security and Compliance Manager that addresses this or does anyone know how to set up SQL to accept Compliance Manager?

Open Regedit and go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager
Delete this key under Session Manager "PendingFileRenameOperations". Restart the installation and it will work fine.
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

No security set up yet it is asking for an encryption key

I have the WRT54G wireless router. I am running 3 pc's on the network. I had some issues with the router the other day. I restored to factory defaults and now 2 of the pc's can connect no problem but the third is listing the router as security enabled. It has no security set up on it. All three pc's are running xp. Is there a setting on my pc to change? Do I delete a temp file or something? I have never set up a key on this router and this is getting to the frustration point.
Thanks!

I assume your router has a unique SSID, and you are not trying to connect to your neighbor's router.
Try deleting all the "Preferred Networks" on the non-working computer.
In the non-working computer, if you are running both Linksys wireless card management software, and WZC at the same time, turn one of them off.
In the non-working computer, if you are running a software firewall, temporarily turn it off. Note that some users have had difficulty turning off Zone Alarm, and they needed to uninstall it to get it turned off.
Message Edited by toomanydonuts on 05-03-200701:20 AM
Message Edited by toomanydonuts on 05-03-200703:36 AM

How do I do this to use OVerdrive media on deviceThe Apple device must be formatted for use with Microsoft Windows. The iTunes setting 'Manually manage music-' must be enabled for the device before you can complete the transfer.

I cannot make these directions work
I downloaded media on Overdrive MEdia on my PC
I have the overdrive media ap on my I pod touch 4g
this media is suppossed to be compatible w/I pd touch
Notes on Transferring OverDrive MP3 Audiobooks…
Most MP3 capable devices should play OverDrive MP3 Audiobooks.
If you intend to transfer OverDrive MP3 Audiobooks to an Apple® device, note the following…
iTunes® v9.0.2 (or newer) is required.
The Apple device must be formatted for use with Microsoft® Windows®.
The iTunes setting 'Manually manage music…' must be enabled for the device before you can complete the transfer. Adjust this setting in iTunes as follows…
Connect the iPod® to your computer.
If it does not launch automatically, open iTunes v9.0.2 (or newer).
In iTunes, locate the device in the left vertical navigation panel (under heading 'DEVICES'), and click the device.
The 'Summary' screen is displayed.
Place a checkmark next to 'Manually manage music…'.
Click the 'Apply' button.
The iTunes 'Summary' screen refreshes, and the changes are saved.
If desired, close iTunes.
Note that if an Apple device is connected to your computer, you can choose to simultaneously transfer a title to the iTunes Library and the Apple device. If you wish to only transfer a title to the iTunes Library, you must first disconnect the Apple device

Recovering your iTunes library from your iPod or iOS device: Apple Support Communities
Also you said " I want to add them to my iCloud, and also back to my computer. " Note that unless subscribe to iTunes match, only iTunes purchases are stored in iCloud.
Also,
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Airport Express not recognized by Utility after changing security setting.

We use an Extreme with an Express to extend the network and run speakers. While trying to eradicate Airtunes dropouts I changed the security setting on the Express using the Airport Utility. After the update, the Express is no longer being recognized. Help!!! I've unplugged it and used the reset button to no avail. I'm a techno-dummy, so please be gentle. I really do appreciate any insight.

Hi,
It seems you have set a too strong security on the Extreme that is not supported on the Express.
I don't know what model of Express you have so try to use a less strong security on the Extreme.
(you can find the security specs of your express on Apple's website : http://support.apple.com/specs/#airport )
As you have reset the Express... you will first have to set it up again...
P.S. : Do the connection drop problems occur on the Express and / or on the extreme ?
As security settings "should" not be the cause for WiFi connection drop, something else is.
Can you give more info on what you already tried ? Ex : Multicast Rate, Transmit Power, Use wide channels, Closed network, Use interference robustness
Kind regards,

Why can't I connect to my brother MFC-J4510DW printer wirelessly? The printer is connected to the router and I can surf the web. I wonder if some security setting may be keeping it from connecting to my MacBook Pro.

Why can't I connect to my brother MFC-J4510DW printer wirelessly? The printer is connected to the router.
I can surf the web. My wife can print from her PC wirelessly on it.
I wonder if some security setting may be keeping it from connecting to my MacBook Pro. I've installed the software, firmware and driver updates but
it still shows "off line"
with the printer power on. Any suggestions?

All I can suggest right now is back up first the try to reset the printing system, (all printers in the list will be removed).
Then connect directly to the printer via ethernet or to the Mac using USB and restart the efforts you have made up until now.
As for router settings, it's possible but not likely that your router only allows a small number of clients. It's also posible that you have MAC address filtering on, lastly are you using the correct wireless protocol, (802.11a/b/g WEP or WPA etc)?

SendAndLoad fails in mac .app version - possible security setting problem?

Hi all,
I'm having trouble with sendAndLoad working on the .app version of a flash application I made. So far it's only happening on one computer, so it appears to be some sort of security setting. Here's what's going on:
I've built a flash application (Flash 9, AS2) that has three versions: an online version, a standalone .exe version for PC, and a standalone .app version for mac. The user must log in to use the application. Online, this is handled by the portal hosting the flash. In the standalone versions, the user must login through the flash application. Through sendAndLoad, it accesses the same database of user info as the online version. The user just enters username/password, clicks "Submit," and if it finds the combination in the database, it lets the user in. If not, it gives them a message saying they entered the wrong username/password.
This has tested fine across macs and pcs, but sadly one macbook can't use the .app version. It launches, they put in valid username/password, hit submit and it freezes. All I can tell is that it gets the httpStatus number 0. As you can see below, I've got it set up to spit out an error message if it fails to load (login_lv.onLoad = function(success)), but it doesn't even do that.
I've put a crossdomain.xml file at the root level of the domain that's set to allow access from any domain.
This computer can log in successfully to the online version of the course, but the .app version seems to be hampered by some sort of security setting. The problem computer's settings match the settings of a mac I've tested successfully. It has up-to-date Flash 10 and is running Leopard. Here are security settings:
System Preferences>Security
     General
          Everything is unchecked
     FileVault
          Turned off
     Firewall
          "Allow all incoming connections" is selected
I'd appreciate any ideas anyone has. I'm far from wise about the ins-and-outs of mac security, so I may be missing something. I'm happy to clarify anything.
Code is below. It loads login_lv first, then bookmark_lv. It never gets far enough to load bookmark_lv. The severAppUrl is set to a placeholder for confidentiality's sake. The path is defintely right. It works on other computers.
Thanks!
Mike
// create a LoadVars instance
var login_lv:LoadVars = new LoadVars();
// add the login variables to pass to the server
login_lv.userid = "";
login_lv.pwd = "";
login_lv.modname = "a";
// setup login urls
var serverAppUrl = "http://myurlhere"; //this is just a placeholder. good ol' confidentiality agreements...
var loginUrl = serverAppUrl+"login.asp";
// setup bookmark urls
var bookmarkUrl = serverAppUrl+"menu.asp";
var bookmark_lv:LoadVars = new LoadVars();
// add the bookmark variables to pass to the server
bookmark_lv.studentid = "";
bookmark_lv.isAdmin = "";
bookmark_lv.modname = "A";
_global.modnameTemp = bookmark_lv.modname;
// setup login function
function doLogin() {
login_lv.userid = login_mc.user_txt.value;
login_lv.pwd = login_mc.pwd_txt.value;
login_lv.sendAndLoad(loginUrl,login_lv,"GET");
// send the login info
login_mc.continueBtn_mc.onRelease = function() {
this.enabled = false;
doLogin();
// variables will appear in the login_lv object
login_lv.onLoad = function(success) {
if (success) {
if (this.studentid == undefined) {
login_mc._x = 0;
trace("not logged in");
debug_mc.body_txt.text+="\nnot logged in";
if(this.reas == "Please Complete Overview and first 3 Module(s) with at least 70 score."){
login_mc.loginBad_mc.gotoAndStop("r2");
login_mc.loginBad_mc._visible = true;
} else if(this.reas == "Please Complete Overview Module first."){
login_mc.loginBad_mc.gotoAndStop("r3");
login_mc.loginBad_mc._visible = true;
} else {
login_mc.loginBad_mc._visible = true;
} else {
login_mc._x = 800;
trace("now logged in");
debug_mc.body_txt.text+="\nnow logged in";
trace("studentid: "+this.studentid);
trace("isAdmin: "+this.isAdmin);
//track variables for later use
_global.studentidTemp = this.studentid;
_global.isAdminTemp = this.isAdmin;
bookmark_lv.studentid = ""+this.studentid+"";
bookmark_lv.isAdmin = ""+this.isAdmin+"";
bookmark_lv.sendAndLoad(bookmarkUrl,bookmark_lv,"GET");
}else{
debug_mc.body_txt+="\nlogin load error"
login_lv.onHTTPStatus = function(httpStatus:Number) {
    this.httpStatus = httpStatus;
    if(httpStatus < 100) {
        this.httpStatusType = "flashError";
    else if(httpStatus < 200) {
        this.httpStatusType = "informational";
    else if(httpStatus < 300) {
        this.httpStatusType = "successful";
    else if(httpStatus < 400) {
        this.httpStatusType = "redirection";
    else if(httpStatus < 500) {
        this.httpStatusType = "clientError";
    else if(httpStatus < 600) {
        this.httpStatusType = "serverError";
debug_mc.body_txt.text+="\n login_lv HTTPStatus number="+httpStatus+" HTTPStatus type="+this.httpStatusType;
//prepare bookmarkXML to receive returned info from bookmark_lv function
var bookmarkXML = new XML();
bookmarkXML.ignoreWhite = true;
bookmarkXML.onLoad = bookmark_lv;
// variables will appear in the bookmark_lv object
bookmark_lv.onLoad = function(success) {
if (success) {
trace("bookmarked");
debug_mc.body_txt.text+="\nbookmarked";
trace("bookmarkXML: "+bookmarkXML);
var bookmarkNode = mx.xpath.XPathAPI.selectNodeList(this.firstChild, "/bookmark");
trace("bookmarkNode: "+bookmarkNode);
var bookmarker:String = unescape(eval("bookmark_lv"));
trace("bookmarker: "+bookmarker);
bookmarker = bookmarker.split("<xml>").join("");
bookmarker = bookmarker.split("<bookmark").join("");
bookmarker = bookmarker.split("/bookmark>").join("");
bookmarker = bookmarker.split("</xml>").join("");
var startIndex:Number;
var endIndex:Number;
startIndex = bookmarker.indexOf(">");
trace(startIndex);
endIndex = bookmarker.indexOf("<");
trace(endIndex);
var bookFinally:String;
bookFinally = bookmarker.substr(startIndex+1, endIndex-2);
bookFinally = bookFinally.split("<").join("");
setBookmarkStr = ""+bookFinally+"";
trace("string: "+setBookmarkStr);
_global.newBookmark = bookFinally;
play();
}else{
debug_mc.body_txt+="\nbookmark load error"
bookmark_lv.onHTTPStatus = function(httpStatus:Number) {
    this.httpStatus = httpStatus;
    if(httpStatus < 100) {
        this.httpStatusType = "flashError";
    else if(httpStatus < 200) {
        this.httpStatusType = "informational";
    else if(httpStatus < 300) {
        this.httpStatusType = "successful";
    else if(httpStatus < 400) {
        this.httpStatusType = "redirection";
    else if(httpStatus < 500) {
        this.httpStatusType = "clientError";
    else if(httpStatus < 600) {
        this.httpStatusType = "serverError";
debug_mc.body_txt.text+="\n bookmark_lv HTTPStatus number="+httpStatus+" HTTPStatus type="+this.httpStatusType;

try using different loadvars instances for your send loadvars and for your receive loadvars.

Security Setting in Microsoft Excel Prohbit XL Report From Running

Dear Expert,
When I run XL Report following error message display
Security Setting in Microsoft Excel Prohbit XL Report From Running
On server Excel 2003 is installed and its working ,
But client PC Excel 2007 is installed and when run xl addon above error display...
all the micro setting and trust center setting is done.
Pls help me.......
Thanks
Ashish Nandgaonkar

Dear Ashish Nandgaonkar,
You may check this thread first:
XL reporter issue in SAP Business one 2007 B patch 15
Thanks,
Gordon

When password security-setting dialogue box is opened, the bottom can't be seen or moved

Using Acrobat XI Pro on my Dell PC, I was trying to add password protection to the document. When I click on the "encrypt with password" button, the password security-setting dialogue box pops up, and I can enter the password. However, the bottom of the page is not visible and I can't move it to click the "ok" button. Any suggestions?

Which Acrobat XI Pro are you using? I think you experience the same problem that was reported on this forum in the past. I believe this problem was fixed in one of the recent versions (11.0.07??). Upgrade to the latest version and the problem should go away.

Set Schedule Manager to run OB52 on certain condition

Dear Friends,
Can i use Schedule Manager to automatically run OB52 with certain condition? For Example, on the last day of the period, i want to set to extend all the account type to the next period. And then, after a certain day of the new period, I want to set schedule manager to close previous period for certain account type.
Can Schedule Manager do that?
Thanks a lot,
CW

Hi Akhilesh,
Thanks for replying. So, does it mean that Schedule Manager can not support for automation? I mean, even though that we can put OB52 in the tasklist, but we still have to execute it manually?
Thanks,
CW

IE 11 Security Setting change by itself

When I use IE and going to some websites (Google, NBA.COM, etc) I get a web page error window" Do you want to debug this web page" with some kind of function error. Each time the detail of the error be different. I changed the Internet options
security to default level and in advance section check the not to display script error option. However after going to some sites, I still get the same error and I noticed that after getting error, the security setting automatically changed to custom, from
the default which I set by myself. I tried to reset IE, still get the same . I tried to do a system restore , But it fails
can someone advice
George

Hi,
What's your environment, domain or workgroup?
Try this:
From IE> Tools> Internet Options> Advanced...>Check "Disable script debugging" and uncheck "Display a notification about every script error."
After that run this Fix it Tool:
http://support.microsoft.com/kb/822521
Meanwhile, let's verify if the issue occurs in Internet Explorer No Add-ons?
To launch it via below method:
Start Internet Explorer 11 in No Add-ons mode by running the Run command from the Start menu, and then typing iexplore.exe -extoff into the box.
Karen Hu
TechNet Community Support

Security Setting in Manage Dynamic Heirarchy

Similar Messages

Maybe you are looking for