Seed Demo Community Failes

Hi Im new To the BPM and SOA suite. I currently have it running however now Im required to configure my server for a tutorial. Im trying to seed a demo community and Understand very little what has to be done. here what ive managed to do:
go to :
Cd c:\Oracle\DemoCommunitySeedApp
c:\Oracle\DemoCommunitySeedApp> setAntEnv.bat
Failed: "C:\Oracle\Middleware\jdev_bpm11g\jdk160_18"\lib\tools.jar does not exist
PLease set your JAVA_HOME to a JDK home.
I then set JAVA_HOME from environment variables to
C:\Oracle\Middleware\jdk160_24
I run the code and the same Failed line of command appears how do I go about it??? how can I make it run??
I actually have no idea where to begin with were do I go into to configure the server? the console? or same place where I configured the domain?
thanks in advance!

Hi
1. Inside this folder c:\Oracle\DemoCommunitySeedApp, or search here for a file named "SOATestDemoApp.ear".
2. Start your SOA Domain. If you have Admin and Soa ManagedServer. Start both the servers. Incase if you have only one AdminServer with soa also deployed, just start admin server.
3. Login into Weblogic Admin Console using something like http://youradminhost:adminport/console. Login with domain username/password. On left side, click on Deployments and on right side, click on Install and follow the screens to install the above "SOATestDemoApp.ear" app to the SOA Managed Server. This is important, as it has to be deployed on SOA Server only. If you have only one admin with soa modules, then deploy to that admin server only. Make sure you hit Activate button or look for this file in deployments list on right side with status as Active.
4. Open a new browser, type this below url. Again host, port should be the one that has soa modules deployed.
http://soahost:soaport/integration/SOADemoCommunity/DemoCommunitySeedServlet
Select the xml file and hit the button, and you should be all set. Go back to console, and under Security -> myrealm -> Users and Groups, you should see all the Demo users and groups.
NOTE: There is no need to run ant script or recompile it, if you already have the EAR file. Read the readme.txt file that came with the zip file.
Thanks
Ravi Jegga

Similar Messages

Communication Failing with Corrupted Chars . Sql Server 2000 and AS400

Hi Experts,
I am facing this below error after 9 yrs. sql server 2000 and As400 on prod server. while on dev and stage it's running properly. Here username is ABCD, while it's showing BCD
The OLE DB provider "MSDASQL" for linked server "" reported an error. Authentication failed. [SQLSTATE 42000] (Error 7399) Cannot initialize the data source object of OLE DB provider "MSDASQL" for linked server "xxxxx".
[SQLSTATE 42000] (Error 7303) OLE DB provider "MSDASQL" for linked server "" returned message "[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed".
[SQLSTATE 01000] (Error 7412) OLE DB provider "MSDASQL" for linked server returned message "[IBM][iSeries Access ODBC Driver]Communication link failure. comm rc=8001 - CWBSY0001 -
User BCD on server does not exist, Password length = 8, Prompt Mode = Never, System IP Address = "xxxxx". [SQLSTATE 01000] (Error 7412). The step failed.
Here ABCD user is also disabling/locking the profile on AS400 server.
When we tried on Dev server, linked server through DSN working properly. Last time when it appeared 2 yrs ago, it resolved automatically. but now more than 10 days passed and still Failing.
Please Guide Me.
Regards,
Manish

So this setup has worked for nine years, and all of a sudden stopped working with this error message? Does not look trivial...
What does Here ABCD user is also disabling/locking the profile on AS400 server mean? Is ABCD able to log in directly on the AS400 box?
One possibility is that the user ABCD has been dropped or disabled, and then there is a bug in the ODBC driver where the first character of the username is distorted in the error message. I note that there are two spaces between "User" and "BCD".
The other possibility is that the AS400 is receiving a login attempt from BCD (or something that ends in BCD with an invisible leading character). This sounds very difficult to troubleshoot...
Erland Sommarskog, SQL Server MVP, [email protected]

AIA Demo Application failed during Installation.

Hi ,
I am getting this error while Installing and Deploying AIA Demo Application(deployment script ant –f deployDemo.xml in command window).Please find the error message displayed on the command window.
D:\Devrep\Oracle\AIAHome\samples\AIADemo\config>ant -f deployDemo.xml
Buildfile: deployDemo.xml
InstallDemo:
[echo]
[echo] /------------------------------------------------------------\
[echo] ! !
[echo] ! Setting the environment to install !
[echo] ! AIA Demo !
[echo] ! !
[echo] ! Verify D:\Devrep\Oracle\AIAHome\aia_instances\AIA/logs/AIAdemoI
nstall.log !
[echo] \------------------------------------------------------------/
[echo]
[echo] /----------------------------------------------------------\
[echo] ! !
[echo] ! Installing AIA Demo !
[echo] ! !
[echo] \----------------------------------------------------------/
AID:
BUILD FAILED
D:\Devrep\Oracle\AIAHome\samples\AIADemo\config\deployDemo.xml:91: The following
error occurred while executing this line:
D:\Devrep\Oracle\AIAHome\samples\AIADemo\config\deployDemo.xml:123: The followin
g error occurred while executing this line:
D:\Devrep\Oracle\AIAHome\Infrastructure\Install\AID\AIAInstallDriver.xml:35: web
logic.security.internal.encryption.EncryptionServiceException: weblogic.security
.internal.encryption.EncryptionServiceException: weblogic.security.internal.encr
yption.EncryptionServiceException: [Security:090219]Error decrypting Secret Key
java.lang.SecurityException: The provider self-integrity check failed.
Please help me out how to resolve this issue.I had post this thread also last time but unfortunately I didn't got any response so far
Thanks
Biswanath

Hi
This is the location i am having my installation because in this location only MY AIA instance got created.
Here i am pasting my env variable setup in aiaenv.bat file
#set environment variables
set AIA_HOME=D:\\Soasuite\oracle\Middleware\SOASuite11gR1PS4\oracle_common
set MW_HOME=D:\\ORACLE\Middleware
set SOA_HOME=D:\\ORACLE\Middleware\Oracle_SOA1
set JAVA_HOME=D:\ORACLE\Middleware\jdk160_24\jre
set AIA_INSTANCE=%AIA_HOME%/aia_instances/AIAinst1
kindly help...

AIA Installing and Deploying Demo Application failed:Build.xml not found

Hi,
i am trying to install demo application using following steps
Extract Foundation Pack Demo under <AIA_HOME>.
If not already done so, set environment variables:
For Linux (bash shell)
source <AIA_HOME>/aia_instances/<aia_instance>/bin/aiaenv.sh
For Windows
Navigate to aiaenv.bat located in <AIA_HOME>\aia_instances\<aia_instance>\bin
Run aiaenv.bat
You may have to assign higher memory values in your JVM parameter settings for demo to deploy if you have not set the maximum possible value already. Use the following three steps as guidance to configure JVM parameters:
Navigate to <Middleware home>\user_projects\domains\<domain_name>\bin
Update the following parameter in the setSOADomainEnv.sh (for Linux) and setSOADomainEnv.cmd (for Windows) file:
USER_MEM_ARGS=""-Xms2048M -Xmx2048M -XX:PermSize=256M -XX:MaxPermSize=512M -Xmn1228M -XX:SurvivorRatio=10""
Note: These are recommended values while using Sun JVM. Actual values that you set depend on your system configurations. When running on dedicated hosts, you can set the JVM heap size as high as possible. Higher value results in better performance. However this number is constrained by the operating system's addressable memory space.
Restart SOA server
Run the deployment script:
At the command line prompt, run the following command for your platform:
For Linux:
cd $AIA_HOME/samples/AIADemo/config
ant -f deployDemo.xml
For Windows:
cd %AIA_HOME%\samples\AIADemo\config
ant –f deployDemo.xml
while runiing the deployment script it showing build.xml not exist..
Error Details
D:\Soasuite\oracle\Middleware\SOASuite11gR1PS4\oracle_common\samples\AIADemo\con
fig>ant -f deployDemo.xml
Buildfile: build.xml does not exist!
Build failed
Any suggestions
Thanks in advance

Hi
This is the location i am having my installation because in this location only MY AIA instance got created.
Here i am pasting my env variable setup in aiaenv.bat file
#set environment variables
set AIA_HOME=D:\\Soasuite\oracle\Middleware\SOASuite11gR1PS4\oracle_common
set MW_HOME=D:\\ORACLE\Middleware
set SOA_HOME=D:\\ORACLE\Middleware\Oracle_SOA1
set JAVA_HOME=D:\ORACLE\Middleware\jdk160_24\jre
set AIA_INSTANCE=%AIA_HOME%/aia_instances/AIAinst1
kindly help...

Asynchronous Communication fails

Hi,
I am using Visual Basic.NET 2003 and measurement studio together with National Instruments NI-VISA(TM) Software for Windows. Version 3.0.
Synchronous communication with GBIP instrument (ESG E4438C from Agilent) works fine but I have a problem with asynchronous I/O.
I always get an error like "Unable to queue the asynchronous operation (usually due to the I/O completion event not being enabled or insufficient space in the session's queue)."
What went wrong?
Here is my code:
Private Sub btGo_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btGo.Click
AxCWVisa.RsrcName = "visa://149.204.55.39:3537/GPIB0::19::INSTR"
AxCWVisa.Open()
AxCWVisa.WriteAsync("*idn?")
End Sub
Private Sub AxCWVisa_IOC
ompletion(ByVal sender As Object, ByVal e As AxCWVisaLib._DCWVisaEvents_IOCompletionEvent) Handles AxCWVisa.IOCompletion
MsgBox("IO completed")
End Sub
I have tried to Enable Events
AxCWVisa.EnableEvent(CWVisaEventTypes.cwvisaEventIOCompletion)
but all without success.
Thank you for your help,
Markus

Hi Dan!
Thank you for your answer.
I have tried again the EnableEvent method but this fails. Here is my code:
AxCWVisa.RsrcName = "visa://149.204.55.39:3537/GPIB0::19::INSTR"
AxCWVisa.Open()
AxCWVisa.EnableEvent(CWVisaEventTypes.cwvisaEventIOCompletion)
After calling the EnableEvent method I get an exception with the following message:
"Additional Information: Configuring Device
The specified mechanism is not supported for the given event type."
Since this is visaconnection across a network I have tried the asynchronous access at the local maschine - but with the same error message. So the network access should not be the problem.
Using NISpy I get the following Info:
1. viOpenDefaultRM (0x001AEC58)
Process ID: 0x00000A40 Thread ID: 0x000009D8
Start Time: 09:54:12.838 Call Duration: 00:00:00.421
Status: 0 (VI_SUCCESS)
2. viParseRsrc (0x001AEC58,"visa://149.204.55.39:3537/G...",1 (0x1),0 (0x0))
Process ID: 0x00000A40 Thread ID: 0x000009D8
Start Time: 09:54:13.259 Call Duration: 00:00:00.110
Status: 0 (VI_SUCCESS)
3. viClose (0x001AEC58)
Process ID: 0x00000A40 Thread ID: 0x000009D8
Start Time: 09:54:13.369 Call Duration: 00:00:00.000
Status: 0 (VI_SUCCESS)
4. viOpenDefaultRM (0x001AEC58)
Process ID: 0x00000A40 Thread ID: 0x000009D8
Start Time: 09:54:13.369 Call Duration: 00:00:00.000
Status: 0 (VI_SUCCESS)
5. viOpen (0x001AEC58,"visa://149.204.55.39:3537/G...",0 (0x0),0 (0x0),0x001DD1E0)
Process ID: 0x00000A40 Thread ID: 0x000009D8
Start Time: 09:54:13.369 Call Duration: 00:00:00.219
Status: 0 (VI_SUCCESS)
6. viSetAttribute (0x001DD1E0,0x3FFF001A,2000 (0x7D0))
Process ID: 0x00000A40 Thread ID: 0x000009D8
Start Time: 09:54:13.588 Call Duration: 00:00:00.000
Status: 0 (VI_SUCCESS)
7. viSetAttribute (0x001DD1E0,0x3FFF0005,5000 (0x1388))
Process ID: 0x00000A40 Thread ID: 0x000009D8
Start Time: 09:54:13.588 Call Duration: 00:00:00.000
Status: 0 (VI_SUCCESS)
8. viSetAttribute (0x001DD1E0,0x3FFF0007,0 (0x0))
Process ID: 0x00000A40 Thread ID: 0x000009D8
Start Time: 09:54:13.588 Call Duration: 00:00:00.000
Status: 0 (VI_SUCCESS)
9. viSetAttribute (0x001DD1E0,0x3FFF0177,-1 (0xFFFF))
Process ID: 0x00000A40 Thread ID: 0x000009D8
Start Time: 09:54:13.588 Call Duration: 00:00:00.000
Status: 0 (VI_SUCCESS)
> 10. viSetAttribute (0x001DD1E0,0x3FFF0021,9600 (0x2580))
> Process ID: 0x00000A40 Thread ID: 0x000009D8
> Start Time: 09:54:13.588 Call Duration: 00:00:00.000
> Status: 0xBFFF001D (VI_ERROR_NSUP_ATTR)
> 11. viSetAttribute (0x001DD1E0,0x3FFF00B3,2 (0x2))
> Process ID: 0x00000A40 Thread ID: 0x000009D8
> Start Time: 09:54:13.588 Call Duration: 00:00:00.015
> Status: 0xBFFF001D (VI_ERROR_NSUP_ATTR)
Any idea what went wrong?
Thank you for your help!
Markus

Financial Brokerage Service demo build failing

Hi
When i try ant build this demo against OC4J bundled with JDeveloper 10.1.3 it is failing with the output given below. I tried same with OC4J bundled with JDeveloper 9.0.5.1, 9.0.5.2 and 10.1.2; but case with 10.1.3 looked more promising.
Ant output
wsejb-jar:
[jar] Building jar: /home/anthos/projects/ibfbs/lib/ibfbs_service_ejb.jar
gen-service:
[echo] Using Web Service Asswembler from /opt/share/apps/jdev1013/j2ee/home//../../webservices/lib/wsa.jar
[java] INFO: Starting Web Services Assembler preview. build March-23-2004
[java] SEVERE: Config file is Deprecated, please use ant tasks or command line options instead!!!!
[java] INFO: Configuration file is /home/anthos/projects/ibfbs/config/service-config.xml
[java] WARNING: oracle.j2ee.ws.tools.wsa.WSAEndpointCompileTool$MyEndpointCompileTool failed to load class: StockQuoteEJB
[java] WARNING: oracle.j2ee.ws.tools.wsa.MultiServiceCompileTool failed to load class: StockQuoteEJB
[echo] Generating service artifacts....DONE
[delete] Deleting directory /home/anthos/projects/ibfbs/tmp
ws-jar:
[jar] Building jar: /home/anthos/projects/ibfbs/lib/ibfbs_ws.jar
gen-client:
[echo] Using Web Service Asswembler from /opt/share/apps/jdev1013/j2ee/home//../../webservices/lib/wsa.jar
[java] INFO: Starting Web Services Assembler preview. build March-23-2004
[java] SEVERE: Config file is Deprecated, please use ant tasks or command line options instead!!!!
[java] INFO: Configuration file is /home/anthos/projects/ibfbs/config/client-config.xml
[echo] Generating Client artifacts....DONE
[delete] Deleting directory /home/anthos/projects/ibfbs/tmp
web-classes:
[javac] Compiling 35 source files to /home/anthos/projects/ibfbs/build/web/WEB-INF/classes
[javac] /home/anthos/projects/ibfbs/web/src/oracle/otnsamples/ibfbs/admin/helper/JAXRPCStockQuoteServiceClient.java:23: cannot resolve symbol
[javac] symbol : class StockQuoteEJB_Impl
[javac] location: package wsclient
[javac] import oracle.otnsamples.ibfbs.admin.helper.wsclient.StockQuoteEJB_Impl;
[javac] ^
[javac] /home/anthos/projects/ibfbs/web/src/oracle/otnsamples/ibfbs/admin/helper/JAXRPCStockQuoteServiceClient.java:60: cannot resolve symbol
[javac] symbol : class StockQuoteEJB_Impl
[javac] location: class oracle.otnsamples.ibfbs.admin.helper.JAXRPCStockQuoteServiceClient
[javac] Stub stub = (Stub) new StockQuoteEJB_Impl().getStockQuoteServicePort();
[javac] ^
[javac] Note: Some input files use or override a deprecated API.
[javac] Note: Recompile with -deprecation for details.
[javac] 2 errors
BUILD FAILED
/home/anthos/projects/ibfbs/build.xml:244: Compile failed; see the compiler error output for details.
--

I get the same error while running the web services samples (basic using stateless).
wsa:
[java] Error: Invalid command 'config' [java]
[java] Usage:
[java] java -jar wsa.jar -<command> -debug -help
[java] where command can be one of:
[java]      analyze
[java]      aqAssemble
[java]      assemble
[java]      corbaAssemble
[java]      dbJavaAssemble
[java]      ejbAssemble
[java]      fetchWsdl
[java]      genApplicationDescriptor
[java]      genConcreteWsdl
[java]      genDDs
[java]      genInterface
[java]      genProxy
[java]      genQosWsdl
[java]      genValueTypes
[java]      genWsdl
[java]      help
[java]      jmsAssemble
[java]      plsqlAssemble
[java]      sqlAssemble
[java]      topDownAssemble
[java]      version
BUILD FAILED
C:\jws\oracle\basic\stateless\build.xml:20: The following error occurred while executing this line:
C:\jws\oracle\common.xml:74: Java returned: 1
Total time: 3 seconds
CAN ANYONE HELP PLEASE !!!!!!!!!!!!!

When trying to burn files to a DVD (DVD RDL from Memorex) an error message appears saying: Impossible to burn the disk because communication failed between disk player and computer (error code 0x80020022)

When trying to burn files (1,7 GB) to a Memorex DVD, an error messge says: Impossible to burn the disk because communication between disk player and computer failed (error code # 0x80020022).
Is the Memorex incompatible with my i-Mac or what could it be ?
My i-Mac is a 21", Core 2 Duo with 3.06 GHz. RAM is 8Go 1067MHz DDR3.
Thanks.

That message is usually caused by poor media. i.e. poor coating quality.
Mermorex is generally regarded by most users here as poor quality media. So is TDK. Most of us prefer Verbatim, Fuji, Maxell or Taiyu Yuden DVD-R.
Also burn at only 2x or 4x burn speed.

MODBUS-RTU connection with aleatory VISA communication fails

Hi everyone,
I have a big problem that I'm trying to repair since a pair of months. I have a MODBUS gateway connected to my pc via RS-485 in RTU mode. The physical implementation is based on Ethernet cable, so I have two connection converters in both endings of the Ethernet cable that wire each line to its corresponding terminal in a RS-485 connector. On the side of the PC i also have an electronic card to convert RS-485 to USB for connect using a USB port for pc's connection. That card is the model USB-COM485-PLUS1 from the company FTDI chip. I have installed on my PC the drivers of the card that configure a virtual COM serial port for my RS-485 communication. On labview I have programmed my interface for communication using a MODBUS library that was installed previously on my PC (I am using my company PC, because i have this problem on my workplace).
The problem is that, usually, my system works correctly, and the communication is perfect. I read always the holding registers of my gateway, and i can write the control registers without problems, but, some times, the connection spend more time without communication that reading, and after some hours in that conditions, it fall in continuous fail and doesn't work any more since the next day. That problems persists even if i restart the PC or shut it down for a while. By the other side, I realized that when the communication falls it only fall on the reading wire, because even if the reading communication is with continuous fail, i can write on the corresponding registers of my gateway.
I'm sure at 80% that the gateway runs correctly, and I have other installation similar with the same gateway, cable, connections and card working correctly. I tried changing the Ethernet cable, changing the RS-485 to USB conversion card and only when i changed my PC, the problem disappears. So I thought it was a problem of the PC. But some time after I changed the PC, the problem returned. After this, I continue making probes and actually I have the theory that it may be a problem because i have other communications running at the same time in my labVIEW app. I think it may be a problem of incompatibility of drivers or a bridge over different communications that make it fail. Because the pc's where this error disappear has not installed NI RIO drivers.
My LabVIEW program also have a communication via Ethernet with a NI cRIO 9076 chassis. That chassis has a module for PROFIBUS communication, also has a module for thermocouple inputs, a module for voltage inputs and other for voltage outputs. All this modules work correctly always. My theory is that some of this other modules in NI cRIO 9076 chassis may cause a conflict that make my system works wrong. Other things that seems me annoying is that i bought recently a new conversion card for RS-485 to USB connection and it doesn't works on my system, I have other two identical cards and they work correctly, and i know that the new card works also in other systems i have.
The issue I don't understand is that this problem doesn't happend many times and it seems to be aleatory... The fail that the labVIEW return when it can not read the holding registers is a timeout error because of a frame error. It would be illuminating for me if that error where periodic or systematic, but occurs only a day every two or three weeks and the rest of time works properly. But on my company, when this installation will work continuously, it can't have any day of non-work.
So, please, I need help with this Issue, I'm lost int he way of resolving it. Thanks only for read this large post.
Regards,
Joaquín
PD: Please, don't damn my English, it is not my mother tongue, I'm spanish.

First of all, thanks for your quick reply.
I had the USB port save power mode enabled. I have disabled it. Actually my system works correctly so I can't know if the problem has been solved, but i have a new converter card for RS-485 to USB and it doesn't works, i have other two that work properly but the new only writes, just like when i have the problem commented. So, I think that if i solve the problem with the new card, i can be sure that I will have solved my connection problem. The new card is configured with the same options that the others, except by the port number, i configured COM 3, COM 4 and COM 5 respectively.
By the other side, when I said that I think cRIO interferes in MODBUS communication I mean that the only things that changes in PC's that correct the problem are that they have not installed the FPGA module or the RIO drivers. And once i changed my PC, the problem was solved since I installed this module and drivers, moment when the problem reappeared.
Thanks again

TCP communication fails

I have a VI that communicates to six devices simultaneously over Ethernet. Three of these devices are on a serial port server so the PC recognizes them as serial ports and I use Visa Serial for this communication. The other connection is to a PLC. The problem is with the two watlow controllers connected via ethernet. After a couple hours of continuous run, the information from the Watlows gets garbled or fails completely while my other devices communicate just fine. If I stop and restart Labview the communications come back properly.
The program opens three TCP connections each to a different IP Address. then goes into two while loops. One while loop is faster and talks with the PLC. The other while loop is slower and talking to the Watlows. I use the same remote ports for all three and asked the customer to change them to be 502, 503, 504 but this caused an immediate loss of communications.
Anybody have any ideas? These are Watlow EZ-Zone controllers.
Attachments:
SIP Main Interface Beta IV.vi ‏535 KB

Hi Technics,
Did you try to use the Process Monitor from Microsoft to see why the communication hangs up ? There are many more programs that can be helpful, if you search for "procman" or "procmon. with those programs you can monitor the system and see waht goes wrong. also if your program uses NI-VISA. you can use NI spy to monitor the system.
Thanks and have a great day.

Disc communication failed

When i'm trying to burn a DVD i got this message just recently,
"Burning the disc failed because communication to the disc drive failed (error code 0x80020022)
I try to burn a cd and it worked! Also tried another DVD and nothing, also test in another Power Mac and the same thing happen
(i just recently installed apple lastest software update for this mac it was something related with Power Macs but with Intel )
Do you think its just coincidence or it did affect my drives completly
power mac g4 Mac OS X (10.4.8)
Mac OS X (10.4.8)

What is the make and speed of your drive (DVD write speed)? What type and speed of DVD media are you using. I found that my 2x DVD drive was having problems with some types of 8x and 16x media. I ended up adding an additional DVD+/-RW DL drive. Here's data on mine for comparison (from System Profiler (Disc Burning):
PIONEER DVD-RW DVR-104:
Firmware Revision: A227
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2000 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media: No
PIONEER DVD-RW DVR-110D:
Firmware Revision: 1.41
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2000 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW, +R DL
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No
& from the ATA section:
Regards,

Unable to connect to XL Reporter. Error! Server communication failed!

Hi Experts,
I am receiving the following error when starting XL Report in SAP
The VB Application identified by the event source logged this Application XL Reporter: Thread ID: 4232 ,Logged: Server sap01
The connect information provided in MetaInfo.xml is wrong.
(Please contact the administrator to run ChangeDbPassword)
Details: ixOpen - Microsoft OLE DB Provider for SQL Server (-2147217843)
Login failed for user 'sa'.
Can't connect to database Provider=SQLOLEDB.1;Data Source='sap01';Initial Catalog='SBO-COMMON';User ID='sa';Password=*****
SYSTEM INFORMATION:
>>SAP 2007A SP01 PL06
>>Windows XP SP3, Windows 7, Windows Server 2003 R2 >> happens on all machines
>>SQL Server 2005
>>.NET 1.1 & .NET 2.1 installed
>>MDAC 2.8 SP1 installed
THINGS I TRIED:
>>Changed sa login through XL Reporter ConnectionManager utility
--sa password works to get into SQL Server Management studio. As a test, I changed it back and fort to see if that makes a difference, but had no luck.
>>Made sure that SAP is logged into the actual server name (not local, also using sa login and not trusted connection)
>>Reinstalled SAP Client, SAP DI API, cleaned local temp folder %temp%
>>XRDBV table has SBOOEM in the Partner column
>>used SAP cleanup utility to delete bad entries from the registry (did this as a part of a reinstall process) >> based on SAP Note 1287193
Any ideas???
Thanks You!!!
Edited by: Stefan Genzor on Apr 13, 2011 12:56 AM

Hi Stefan,
We are having the same issue with a customer who has moved to a new terminal server environment. We cannot get the users to connect to the DB from there, but SAP is connecting with no issues.
We have exactly the same message & have run through the same steps.
Did you manage to get this resolved, and can you remeber how?
Thanks

What happens when HTTPS communication fails during certificate check?

Hello Experts,
I have a scenario where a Bapi functionality(server proxy) is exposed as a webservice .
So scenario will be SOAP -> XI -> Proxy (calls a BAPI)
Here we are going to use HTTPS (SSL).
I would like to know :
What happens when a check for certificate validation fails in XI? It may be due to invalid certificate, expired certificate or a request from unauthorised user-
- Will it be raised as a exception and we need to do some configuration to inform it back to Sender?
- Will the message fail in Moni with red flag ?
- Alerts will be created ?
Please share your experiences and expert sugestions.
Thanks in Advance!!
Regards,
XI Queries.

Hi Abhishek,
Thanks for the reply. I will keep this in mind and design the scenario & error handling accordingly.
Appropriate points awarded
Kind regards,
Xi Queries.

"Spotify desktop client communication failed."

Thanks predatorx, such solution was suggested also elsewhere in this community help, but I was not looking for such remedy - probably it would work :)
Somewhere I read the FB connect has had a bug in it, related to JS and certain ports. It just might be the case here too when I was trying to use the more protected work network. I have no issues using the FB connect with other networks.
Anyhow, happy listenings to everyone and thanks for your help!

Um, here is one screen shot, from another annoyed user. Previously this FB connectivity worked fine (last week) but not today.
OS is Win7.
The address line says (with some characters removed just in case):
https://login.spotify.com/login-auth-success/?csrf=a6159d7e084c04e38a44f28f9b08ab2a&port=4371#access_token=CAAAAKLSe4lIBAC8pi0FAZBYPu4efZBvUbOMKRST9HTF4zibQbQ8ZC1ggXixLuQ3aCwpNRefHGukiX02hhUObH2dcuR0UMdHIxqoMeYFLCNXEu2Sx0GLRtDjuMfKQgtvoFo8tBZBhUS3TJApKcSJMy07c9vDY7QDDOQrZAJ7vvixa9QNx7klQZAeuOXE1JmKlPy1j...w5gtM&expires_in=0

"Demo: Order Entry Demo Application" failed to show up.

I downloaded Wrokshop 8.1 JumpStart kit. and started Exercise#1. However, after
copying demo-orderentry.zip to the target folder as directed, a File_New_Application
did not see "Demo: Order Empty Demo Application" in the right-side pane.
Any clue?

Hi, this did not work for me as well. I did the following: took template.xml file from demo-orderentry.zip and compared it to other template.xml files in other template archives (in the C:\bea\weblogic81\workshop\templates folder). According to the differences, I edited this file a bit, updated the demo-orderentry.zip archive and this worked out.
The template.xml looks now like this:
<template-definition>
<project-template id="oe_demo_project"
extends="default"
type="urn:com-bea-ide:project.type:WebApp">
<content type="archive" destination="project" source="default-project.zip" overwrite="true"/>
</project-template>
<application-template id="oe_demo_app">
<display
location="newdialog"
label="Demo: Order Entry Demo Application"
description="Creates a new application containing components for the Order Entry demo."
priority="2"
categories="Demos"/>
<project-template-ref default-name="Schemas" type="urn:com-bea-ide:xbean" template="default"/>
<project-template-ref default-name="AvitekDemoApp" type="urn:com-bea-ide:project.type:WebApp" template="oe_demo_project"/>
</application-template>
</template-definition>

BPA Demo Installation fails

When attempting to install evaluation copy of the BPA suite I get error:
Connection to Oracle Database Server FAILED
Log In to Oracle Database Server FAILED
Privileges for the Current Oracle Database Server Account FAILED
Oracle Database Server Version FAILED
Oracle Database Server Charset (AL32UTF8) FAILED
'job_queue_processes' Oracle Database Server FAILED
Provided connect string had been verified on the same computer.
It seems that installation shield dinamically creates a file testsql.txt .This script does not create any output. (The file out.txt is empty)
The content of the testsql.txt is:
"bin\tnsping" (ADDRESS=(PROTOCOL=TCP)(HOST=LOCALHOST)(PORT=1521)) >>"C:\Program Files\Oracle BPA Suite11g\out.txt"
"bin\sqlplus" -L -S SYSTEM/manager@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=LOCALHOST)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=orcl))) @"C:\DOCUME~1\bp\LOCALS~1\Temp\1\{E3529E53-DAF8-452E-85E8-7A451B0683FD}\{511E488B-34DD-42EB-8C31-D3C8F21EEFC1}\check_login.sql" >> "C:\Program Files\Oracle BPA Suite11g\out.txt"
"bin\sqlplus" -L -S SYSTEM/manager@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=LOCALHOST)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=orcl))) @"C:\DOCUME~1\bp\LOCALS~1\Temp\1\{E3529E53-DAF8-452E-85E8-7A451B0683FD}\{511E488B-34DD-42EB-8C31-D3C8F21EEFC1}\check_privs.sql" SYSTEM >> "C:\Program Files\Oracle BPA Suite11g\out.txt"
"bin\sqlplus" -L -S SYSTEM/manager@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=LOCALHOST)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=orcl))) @"C:\DOCUME~1\bp\LOCALS~1\Temp\1\{E3529E53-DAF8-452E-85E8-7A451B0683FD}\{511E488B-34DD-42EB-8C31-D3C8F21EEFC1}\check_version.sql" >> "C:\Program Files\Oracle BPA Suite11g\out.txt"
"bin\sqlplus" -L -S SYSTEM/manager@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=LOCALHOST)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=orcl))) @"C:\DOCUME~1\bp\LOCALS~1\Temp\1\{E3529E53-DAF8-452E-85E8-7A451B0683FD}\{511E488B-34DD-42EB-8C31-D3C8F21EEFC1}\check_charset.sql" >> "C:\Program Files\Oracle BPA Suite11g\out.txt"
"bin\sqlplus" -L -S SYSTEM/manager@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=LOCALHOST)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=orcl))) @"C:\DOCUME~1\bp\LOCALS~1\Temp\1\{E3529E53-DAF8-452E-85E8-7A451B0683FD}\{511E488B-34DD-42EB-8C31-D3C8F21EEFC1}\check_jobqueueprocesses.sql" >> "C:\Program Files\Oracle BPA Suite11g\out.txt"

Any solution?

Seed Demo Community Failes

Similar Messages

Maybe you are looking for