Seeing seven displays but only one is connected...

For some reason I'm seeing an extra six displays open for configuration in the display properties. Running a stock nVidia 7300 video card.
NVIDIA GeForce 7300 GT:
Chipset Model: NVIDIA GeForce 7300 GT
Type: Display
Bus: PCIe
Slot: Slot-1
PCIe Lane Width: x16
VRAM (Total): 256 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0393
Revision ID: 0x00a1
ROM Revision: 3008
Displays:
DELL 2707WFP:
Resolution: 1920 x 1200 @ 60 Hz
Depth: 32-bit Color
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
Display Connector:
Status: No display connected

Found the problem, seems an old driver for a USB to VGA adaptor was acting up. Managed to remove it and every-thing's good.

Similar Messages

Two user profiles on my iMac but only one can connect to the internet

Hi,
I got the most recent upgrade for Lion and installed it. I have two user profiles on my iMac and now, only one of them can connect to the internet yet both appear to have gotten the full upgrades. Any ideas why this might be happening?
Thanks!!

Does the Account that can not connect to the Internet have full Administative priveleges or is it a Standard Account. If Standard, check to make sure it is allowed to connect.

WRT54G--Same PC but only one user connected

I connected the router on my PC Desktop with Windows XP. My Macbook connects to the internet as well as my other PC laptop with no problems.
Here's the problem:
The user I was logged onto when I set everything up on my desktop connects to the internet, but all the other users on the SAME computer cannot connect.
Any suggestions?

Check under login rights of all the other users it should be same for internet connection as you as admin getting ... when you are logging as administrator ...

Configuring PPP options for only one VPN connection

How do you configure PPP options for only one VPN connection that is using L2TP over IPSec? The built-in VPN client in 10.4.9 is failing authentication because it won't talk MSCHAP-V2 (this is the only authentication protocol I can use) with the server. I am able to establish a connection if I add the following to /etc/ppp/options:
refuse-eap
refuse-pap
refuse-chap
refuse-mschap
require-mschap-v2
However, these options will affect all PPP connections. The preference file that contains the network configurations (/Library/Preferences/SystemConfiguration/preferences.plist) also contains PPP options for each specific network service. After some searching around, I found that there are several keys that seem promising (MSCHAP2, etc.). But these keys take a string value and I have no clue what they should be. These keys are defined in SCSchemaDefinitions.h file.
Any ideas?
Mac OS X (10.4.9)

Hi Brian,
I just tried to check all of ADDT´s "includes" files for any internal references (read: "require" or "require_once" statements) to the file "tNG_config.inc.php". So far I can only see this file referenced in the file "tNG.inc.php" (within the "$KT_tNG_uploadFileList1" array).
So what could this mean ? Maybe you´ll have to make copies of the the original "tNG.inc.php" as well and save them as, say, "tNG.inc_ital.php" file plus make sure that these copies internally point to a different "tNG_config_ital.inc.php" file -- because it´s always the first mentioned file which gets referenced from e.g. an ADDT login page (see the "Load the tNG classes" - part)
I want to use ADDT’s User Registration Wizard and I have looked at all the neat stuff in the Control Panel/Login Settings
The Control Panel will always update the main "tNG_config.inc.php" file, so any further modifications will have to become manually applied to the custom files you´re creating.
Cheers,
Günter

Simple certificate expired - multiple webgates but only one down

We have OAM 10.1.4.2 and multiple webgates on different web servers. The certificate expired but only one webgate had problem. Users were able to login to other applications protected by the webgates. All webgates were using the same certificate. Once we updated the certificate in the access server and restarted the access server, other webgates start having problem? Shouldn't all webgates will have problem connecting to access server as soon as certificates expires.
Thanks.

Hi,
I would expect all the WebGates to see the same problem, assuming they do use the same certs. It is possible that they are only checked when establishing the connections to the Access Servers - so they will only see problems when the connections are re-established.
Regards,
Colin

HT1349 How do I set up a separate icloud account? Both my wife and I have an iPhone 4s and an iPad, but only one Mac. We are tired of our "stuff" getting mixed up together when we sync.

How do I set up a separate icloud account? Both my wife and I have an iPhone 4s and an iPad (1 and 3), but only one Mac. We are tired of our "stuff" getting mixed up together when we sync. Thanks much

You don't need separate iCloud accounts if you want to simply sync unique content to each device using iTunes. I have three iDevices using one ID and one iTunes library and each device has it's own content on it. You need to set up the sync configuration for each device. This is what I recommend.
First turn off auto sync in iTunes. Launch iTunes on the Mac and go to iTunes>Preferences>Devices>Prevent iPods, iPhones and iPads from automatically syncing. Click OK and then quit iTunes.
Connect one of your devices to the Mac and launch iTunes.
Click on the device name on the left side under the devices heading.
Click on a tab in iTunes - Apps for instance.
Click on the Apps that you want to sync to that device.
Make sure that the Sync Apps heading is checked.
Follow the same procedure for all of the other tabs in iTunes ..... Music, Photos, Movies and so on.
After you have finished making all of your selections, click on Apply in the lower right corner of iTunes.
When you are done, eject the first device and do the same thing with the other device. iTunes will now remember the sync configuration on each device.
You can change that configuration any time that you like by following the steps outlined above.
If you want to continue to auto sync, turn it back on in the iTunes preferences as described above.

How to say application module(s) to consume only one DB connection

Hi,
In my application, i use UI Shell template. All of my task flows are said to have new transaction always and not to share the data control. i have bunch of application modules (not nested AM) with many view objects. All the view objects are custom java data source implemented and none of them requires DB connection as they interact with DB using tuxedo connection. Expected concurrent users will be around 800.
i can understand that application module requires DB connection for activation/passivation, but how can i say all of my application modules to consume only one DB connection??
Thanks in advance.
Raghuraman

Jobinesh,
My application is based on UI tab shell template with each and every task flow set to begin with new transaction always.
I was using database tables for LOV view objects data population alone. Now that also has been changed to custom view data source implementation because of client requirement (LOV data needs to be cached till user-browser session)
With the new implementation,
1. I have some AMs with instances of entity driven VOs. With this, I do transaction with legacy system through Tuxedo. Custom view data source implementation is done to populate data from service. Similarly Update to service will happen by reading transaction listener list on save.
2. I also have couple of AMs with instances of non entity-driven VOs, which will be used as read-only table/LOV. For this also custom view data source implementation is done by reading the reference database table only one time during deployment.
3. As of now, none of my AMs are specified as Shared AM.
Questions:
1. I want to utilize the AM passivation/activation feature to control memory usage. I came to know "*The passivation process saves information used by the AM into the passivation store - usually a database*". I have a database, from where i am reading data for LOV during deployment. Can i have the single connection of that database configured for all the AMs (Both tuxedo transaction VO's AM and LOV VO's AM) so that i can avail this feature. If so, how can i configure all the AMs to consume only one connection?
2. Any other way to avail this AM passivation/activation without database.
Thanks in advance.
Raghu

Hi, i have purchased iPhone 5 about 15 days ago, its working well but only one problem that it has is that some time its losting signal and appear as no serves. would you please help me in this reqard. thanks

Hi, i have purchased iPhone 5 about 15 days ago, its working well but only one problem that it has is that some time its losting signal and appear as no serves. would you please help me in this reqard. thanks

Well, it could be that your carrier doesn't have a signal when it looses its signal. You could try resetting network settings which might help - Settings/General/Reset/Reset Network Settings. You'll need to set up any wi-fi networks you connect too again. If you're still having issues, contact your carrier.
Good luck!

I down loaded a 3 Part audiobook but only one part plays on my ipod touch. All parts did play when first downloaded. Whats gone wrong?

I down loaded a 3 Part audiobook but only one part plays on my ipod touch. All parts did play when first downloaded. Whats gone wrong?

I would either say that the iOS is correpted due to a software glitch or y have have a hardware problem like bad memory locations that are corrupting the iOS.
- Restore from backup via iTunes. This will install a fresh copy of the iOS. See:
iOS: How to back up
- Restore to factory settings/new iOS device.   This will elimate corruptin in the backup causing the problem.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Why do PDF files in email open in safari with a quick time logo but only one page shows and I can't scroll through the following pages?

Why do PDF files in email open in safari with a quick time logo but only one page shows and I can't scroll through the following pages?

Try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.

Two Macs - only one can connect to Airport at a time

Starting today, after 10 days of successful operation, when I came home I couldn't connect to my home (new "square" Airport Extreme) network with my Core 2 MacBook Pro. My wife was happily connected on her PowerBook G4.
Puzzled, I tried a few obvious things:
Airport OFF, Airport ON ... no joy
Logout and back in ... no joy
Restart ... no joy
Then I turned my attention to the Base Station:
Restart ... nope
Change to "None" security ... nope
Change back to "WPA Personal" ... nope
Humbled, I stopped and had dinner. My wife's G4 went to sleep, my Intel went to sleep. Now it gets interersting! My Intel woke up first and immediately joined the network -- I'm happy till I hear my wife say SHE can't get connected.
To make a long story short, I have two laptops on my desk, and only one can connect at a time! This is BIZARRE. Turn off Airport on either one and its buddy gets a connection immediately, and vice versa. Sleep the connected one and the other connects.
I am out of ideas.
Errors on the G4:
Feb 28 20:09:45 localhost configd[35]: WirelessConfigure: 88001003
Errors on the MBPro:
various 88001006 errors as reported by others in this forum.
Both Machines at all the latest updates; the MBPro has the new Extreme software installed from the CD that came with the new hardware.
I would welcome suggestions ...
MacBook Pro Core 2 Mac OS X (10.4.8)
G4 Cube Mac OS X (10.4)

Software Update is not offering me any Airport updates on the G4 (or the Intel).
The recent Airport Update, "AirPort Extreme Update 2007-001", is of course only for Intel Macs.
They could only be "trying to use the same IP address" if they were not configured to use DHCP, but they are configured to use DHCP, and whichever connects does get an address in the 10.0.1.[2-200] range so I think that's not the problem.

I have my ipod backed up on multiple computers but only one recognizes all my playlists. How can I get all my play lists to show up on multiple computers?

I have my ipod backed up on multiple computers but only one computershows all my playlists. How can I get all my play lists to show up on multiple computers?

If you want to connect and use an iPod on more than one computer you need to change the update preference in the iPod Summary tab to "Manually manage music and videos" and click Apply.
Using iPod with Multiple computers
Managing content manually on iPod
If your iPod is set to update automatically take care when connecting to a different computer if your current one is out of commission. You will get a message that your iPod is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all songs from your iPod. Your iPod should appear in the iTunes source list from where you can change the update setting to manual and use your iPod without the risk of accidentally erasing it.

HT201250 Is there a way to keep a particular backup permanently? I'd like to keep a backup, but only one permanently.

Is there a way to keep a particular backup permanently? I'd like to keep a backup, but only one permanently.
Thanks

ds store wrote:
CCC can also custom schedule and save the changes between cloned states for backup just like TimeMachine does or choose the strict mirrored clone option or even choose highly custom options in what gets saved to the clone and how.
Yes, it can, but since CCC and other cloning apps always compare everything on the Mac to everything on the backup, it takes far longer, and much more CPU, to figure out what needs to be backed-up, than Time Machine (which uses the File System Event Store, a log of changes that OSX keeps on each drive). That means it's rarely practical to run a clone more than once a day, as there's a noticeable performance impact; but TM's quick backups are barely noticeable.
As an example, the TM backups on my small system rarely take more than a minute, and I rarely notice them unless I happen to see the icon spinning. But I have my CCC clone updated early each morning (while I'm still snoozing), because it takes 10-15 minutes and slows performance considerably.
So it has the best of both uses now, and the clone is bootable like using the original drive, which TimeMachine lacks as it's only a backup system.
Absolutely. I always recommend Time Machine plus a clone (minimum).
Also clones can be directly accessed, like any other normal drive, by any computer of any operating system that can read the HFS+ format of the Mac, unlike TimeMachine which only works with a Mac. This is beneficial as one can choose to use a Win or Linux PC with their Mac files in times of crisses, to transfer them etc.
That's a two-edged sword, as they say. Time Machine backups are somewhat more secure because only Macs can read them. But again, if you have both TM and a frequently-updated clone, you have the advantages of each.
Don't make me write a TimeMachine vs clones smackdown
See Time Machine vs. Clones and Archives

I am trying to transfer my movies (mp4 files) to my IPad, but they are not showing up on the IPad. I have 13 movies showing on my IPad that they are in ICloud. I've sync'd the movies I want to the IPad, but only one is showing under the "movies" folder. ?

I have been trying to transfer some different movies from my PC to my IPad, but they are not showing in the "movie" folder. I have sync'd the movies (these are mp4 files) that I wanted transfered, but only one is showing in the folder. There are 13 other movies in the folder that have the ICloud symbol in the corner of their picture. I understand that I can pull those movies from ICloud any time I want to watch them, but I want to watch the ones that I've just sync'd with my IPad. How do I find them? After I checked the movies I wanted, I "applied" them and watched it sync and copy the wanted movies to my IPad. Now what? Thanks.

There are some good programs that you could use to convert the format, Handbrake or Mpegstreamclip are two good free ones. Convert them to MP4 and then try importing them again.

How can you use iMessage between 3 iPads with 3 different users but only one Apple ID?

how can you use iMessage between 3 iPads with 3 different users but only one Apple ID?

No you do not need separate Apple ID's in order to use 3 devices with one Apple ID. I use 4 devices to Message and FaceTime and all use the same Apple ID. You do need to add additional email addresses for the other devices.
Look at this very informative video for the instructions.
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l

Seeing seven displays but only one is connected...

Similar Messages

Maybe you are looking for