Seeking help regarding selecting hardware and IOS for full feature MPLS net

Dear all
We are planing to implement MPLS in our network.Would you tell from which platform of cisco router support VPLS,VPWS and PSEUDOWIRES.
Regards
kamal

Hi Kamal
Below are some datasheets for the 7600,6500 and 3750-E products
6500
http://www.cisco.com/en/US/products/hw/switches/ps708/products_data_sheet09186a00800ff916.html
7600
http://www.cisco.com/en/US/products/hw/routers/ps368/products_qanda_item09186a008017a32b.shtml
3750-E
http://www.cisco.com/en/US/products/ps7077/products_data_sheet0900aecd805bbe67.html
You will also have to look at the modules and the supervisor engine you will need in the 6500 or the 7600
below is the link to OSM module datasheet
http://www.cisco.com/en/US/products/hw/modules/ps2831/products_data_sheet09186a008013155c.html
Supervisor engine 720
http://www.cisco.com/en/US/products/hw/switches/ps708/products_data_sheet09186a0080159856.html
Hope this helps, it did help me when we were starting up an MPLS network plus the metro part of it.
Please rate if its helps

Similar Messages

  • I need help regarding my microphone and playback for a VHF app just bought

    I have purchased the Royal Yachting Association VHF SRC App for my iMac and downloaded it.
    The programme asks me to test that my microphone is working and the playback is working.
    I have been to System Preferences and can record my voice to get text onto Word by pressing fn fn - so I know the mike is OK
    I have no idea whether the App does record my voice because when I press Playback nothing happens.
    My iTunes is working perfectly so I can listen to music and watch videos.
    Please help tell me what to do?

    Can we have more information on this.
    This problem might be because of:
    1. Wrong settings for kernel parameters
    2. Wrong environment variables
    3. Wrong access privileges to oracle database files and folders
    4. Improper shutting down or startup of database
    Please provide more information so that we can have some clues. As well, let us know which platform are you running the database on.

  • Any help regarding iphone 4 and locks with o2

    any help regarding iphone 4 and locks with o2
    i just got my second hand iphone4
    and a friend of a friend said it was factory unlocked
    and received txt from o2 saying it was unlocked
    however when i got home i put my micro sim into it
    and
    itunes said
    "this sim card appears to be unsupported" or something similer
    it is factory unlocked because the model number in the settings is
    MC603B
    i rang o2 to ask for unlock. gave them the imei code and they said they have to send the request off to apple for a code

    i rang o2 to ask for unlock. gave them the imei code and they said they have to send the request off to apple for a code
    Obviously the iPhone was/is not unlocked or this would not be required, and there is your answer, which can take up to two weeks.

  • Logic regarding EVENTS OnFilter and OnLeadSelect for table ui element

    provide me logic regarding EVENTS OnFilter and OnLeadSelect for table ui element for webdynpro abap application.

    OnLeadSelect - What kind of logic do you want?  There are many different things that you could do inthe OnLeadSelect
    onFilter- Generally you use IF_WD_TABLE_METHOD_HNDL~APPLY_FILTER  to perform the filter operation.
    In the onFilter itself you probably just have one line of code:
    wd_this->table_method_hndl->apply_filter( ).
    In your WDDOMODIFYVIEW you probably have this code to capture the table_method_hndl object:
    if first_time = abap_true.
      * Get reference of the table view element
      l_table ?= view->get_element( 'TABLE' ).
    * Get reference to the Filter & Sorting API
      wd_this->table_method_hndl ?= l_table->_method_handler.
    endif.

  • What Major/Career to design the iphone/ipod/ipad hardware and iOS design?

    I want to go to college to get a bachelor degree to design iphone/ipod/ipad hardware and iOS designing please tell me.

    If you are wanting to create internal hardware you need to pursue an Electrical Engineering degree. If you want to write software pursued a computer science degree.
    You probably would not be able work on both hardware and software on the iPhone while working at Apple.

  • Router platform and IOS version to support MPLS

    I have few Cisco 2621 routers and one 3640 router, could I use these router to create a MPLS VPN lab? if so , what is the minimum IOS version required?
    Thanks in advance.

    The minimum hardware and software image tu support MPLS can be found at www.cisco.com/go/fn select search by feature and in the search box put MPLS (Multiprotocol Label Switching) there you can find the platform and IOS to support basic MPLS, but you need to consider the fact that supporting MPLS special features like AToM can only be supported on some 7200, 7500, 7600, 10000 and 12000, http://www.cisco.com/en/US/products/sw/iosswrel/ps1839/products_feature_guide_chapter09186a0080153e64.html#1030652

  • Need help with IPhone 4S and upgrade for IOS 7

    I upgraded my phone last night to IOS 7.0.2 and this morning I went through all the initial set up questions and my phone was working.   Once I walked away and it turned off, it is asking me for a passcode to get back into my phone.   I did NOT have a passcode before I upgraded do not know what passcode it would be asking me to enter.   I have tried a couple different passcodes and nothing is working now my phones says it is "DISABLED".   Can anyone help?

    The upgrade to iOS 7.0 automatically turns on Passcode Lock....whether you want it or not. You probably don't remember the passcode you entered when prompted, but regardless, one was setup on the phone. To fix, & remove the passcode, follow the directions here to force the phone into recovery mode & restore it:
    http://support.apple.com/kb/HT1808
    This will remove the passcode.

  • Regarding 'Select .... for all entries' statement

    Hi experts,
    Can anyone suggest me that whether we can use two internal tables in 'Select .... for all entries'  statement?

    Hi,
    You can use ranges instead of second for all entries.
    Eg:
    Say for example i need to write selec statement using fields from two int tables in where conidition namely itab1, itab2.
    RANGES: r_vbeln FOR wa_tab1-vbeln.
    LOOP AT itab1 INTO wa_tab1.
      r_vbeln-sign = 'I'.
      r_vbeln-option = 'EQ'.
      r_vbeln-low = wa_tab1-vbeln.
      APPEND r_vbeln.
    ENDLOOP.
    SELECT * FROM vbap INTO TABLE itab3
    FOR ALL ENTRIES IN itab2
    WHERE vbeln IN r_vbeln "range contains all vbeln from the table itab1
    AND matwa = itab2-matwa.
    Hope this helps you.
    Regards,
    Manoj Kumar P

  • Selecting appropriate Router & IOS for Gatekeeper

    Hi All,
    I managing the Video conference setup but I am struggling to find a appropriate IOS for Gatekeeper
    I need some suggestion for selecting router series (Is 2620XM is ok?) and also the appropriate IOS?
    Gateway is Tandberg
    Planning for 8 video conference (8x256)

    This URL should help you:
    http://www.cisco.com/en/US/products/hw/routers/ps259/index.html
    http://www.cisco.com/en/US/products/sw/voicesw/index.html

  • Regarding select single and select upto 1 rows

    hi experts,
                 plz let me know about difference between select single and select upto 1 rows with small eg...
    thnx in advance.

    Hi Ravi,
    According to SAP Performance course the SELECT UP TO 1 ROWS is faster than SELECT SINGLE because you are not using all the primary key fields.
    select single is a construct designed to read database records with primary key. In the absence of the primary key, it might end up doing a sequential search, whereas the select up to 1 rows may assume that there is no primary key supplied and will try to find most suitable index.
    The best way to find out is through sql trace or runtime analysis.
    Use "select up to 1 rows" only if you are sure that all the records returned will have the same value for the field(s) you are interested in. If not, you will be reading only the first record which matches the criteria, but may be the second or the third record has the value you are looking for.
    The System test result showed that the variant Single * takes less time than Up to 1 rows as there is an additional level for COUNT STOP KEY for SELECT ENDSELECT UP TO 1 ROWS.
    The 'SELECT SINGLE' statement selects the first row in the database that it finds that fulfils the 'WHERE' clause If this results in multiple records then only the first one will be returned and therefore may not be unique.
    Mainly: to read data from
    The 'SELECT .... UP TO 1 ROWS' statement is subtly different. The database selects all of the relevant records that are defined by the WHERE clause, applies any aggregate, ordering or grouping functions to them and then returns the first record of the result set.
    Mainly: to check if entries exist.
    Select Single is the best one compared to UPto one rows.
    Select Single will get the first record from the table which satisfies the given condition.So it will interact once with the database.
    UTO 1 rows will get the list of the records for the given match and iwll show the first record from the list.So it will take time to get the record.
    SELECT SINGLE VBELN from VBAK
    where MATNR = '1M20'.
    ---Thjis will get the first matched record and will display the record
    SELECT VBELN from VBAK
    where MATNR = '1M20' upto 1 rows.
    ---Thjis will get the list of matched records and will display the first record
    The Major difference between Select Single and Select UPTO 1 rows is The Usage Of Buffer for each.
    Select Single will search for all the satisfied data and bring all that data into Buffer and later it will give to that data to the program.
    Select UPTO 1 Rows will end the search after getting the 1st satisfied record and gives that record to the program.
    Thus Select Single will take much processing time when compare with Select UPTO 1 rows.
    Also
    check these threads..
    Difference between Select Single and Selct upto 1 row
    Difference between Select Single and Select upto 1 row
    Thanks,
    Reward If Helpful.

  • Regarding select single and select upto???

    HI All,
    Cud u pls let me know the differences between select single and select upto??
    and which is the better option?? pls its quite urgent..plss plss
    plss
    Thanx in Advance
    Prasad

    Hi..,
    According to SAP Performance course the SELECT UP TO 1 ROWS is faster than SELECT SINGLE because you are not using all the primary key fields.
    select single is a construct designed to read database records with primary key. In the absence of the primary key, it might end up doing a sequential search, whereas the select up to 1 rows may assume that there is no primary key supplied and will try to find most suitable index.
    The best way to find out is through sql trace or runtime analysis.
    Use "select up to 1 rows" only if you are sure that all the records returned will have the same value for the field(s) you are interested in. If not, you will be reading only the first record which matches the criteria, but may be the second or the third record has the value you are looking for.
    The System test result showed that the variant Single * takes less time than Up to 1 rows as there is an additional level for COUNT STOP KEY for SELECT ENDSELECT UP TO 1 ROWS.
    The 'SELECT SINGLE' statement selects the first row in the database that it finds that fulfils the 'WHERE' clause If this results in multiple records then only the first one will be returned and therefore may not be unique.
    Mainly:  to read data from
    The 'SELECT .... UP TO 1 ROWS' statement is subtly different. The database selects all of the relevant records that are defined by the WHERE clause, applies any aggregate, ordering or grouping functions to them and then returns the first record of the result set.
    Mainly: to check if entries exist.
    Check this example ...
    DATA: gv_vbeln TYPE vbak-vbeln,
    gv_erdat TYPE vbak-erdat.
    SELECT SINGLE vbeln erdat
    FROM vbak
    INTO (gv_vbeln, gv_erdat)
    WHERE erdat = '12/01/2006'.
    SELECT vbeln erdat
    FROM vbak UP TO 1 ROWS
    INTO (gv_vbeln, gv_erdat)
    <b>ORDER BY erdat ASCENDING</b>.
    ENDSELECT.
    *In the example, the select single gets the first record that satisfies the WHERE clause unlike in the UP TO 1 ROWS where it sorts the database records by the earliest date and gets its VBELN.
    <b>Try using the ORDER BY clause in SELECT SINGLE .. It gives an error !! U cannot use that with SELECT SINGLE</b>
    The 'SELECT SINGLE' statement selects the first row in the database that it finds that fulfils the 'WHERE' clause If this results in multiple records then only the first one will be returned and therefore may not be unique.
    Hope u understood !!
    reward if it helps u..
    sai ramesh

  • Sizing the hardware and environment for the upgrade

    Hi,
    Can anyone tell me, what is the sizing requirement of hardware and environment, when I'm upgrading from SRM2.0 to SRM5.0?
    Thanks!
    Sonali

    Hi,
      Check details more details on upgrade using following link -
    http://service.sap.com/spau.
    BR,
    Disha.
    Pls reward points for helpful answers.

  • Urgent very urgent help regarding sales analysis and purchase analysis.

    Respective all experts,
    when i see a sales analysis and purchase analisys for a particular month or year i see only amount before discount and tax and that is not a actual net amount that includes tax amount also i want the total gross amount with including tax amount and net amount in sales and purchase analysis. And how will i enter more fields in form settings menu of sales analysis and purchase analysis.
    Awaiting all expert advise,
    Regards
    saisakshi.

    Hi,
    For system reports like sales analysis and purchase analysis, they are hardcoded. There is no room for you to add anything if you cannot find it from the report.
    If you need to customize it, you need to create your own report.
    Thanks,
    Gordon

  • EA6500 manually select speed and duplex for WAN port

    Is there any way (hidden settings?) to manually select speed or duplex for WAN port on EA6500? I'm using EA6500 with Genexis HRG1044 (FTTH) and the latter has known issues with upload speed when local device is connected on gigabit. It seems that both EA6500 and Genexis HRG1044 only support autonegotiation and that always results in gigabit which results in poor upload speeds over the internet. Placing 100 Mbps switch between EA6500 and Genexis HRG1044 does the trick but I was wondering if it can be done without it. BTW, my internet speed is only 100/100 Mbps anyways.
    Solved!
    Go to Solution.

    @discoHR If you don't mind me asking, for what purpose do you want to adjust the speed on the WAN port of the EA6500? Is it to increase the upload speed? I'm just spitballing, but I don't think there's any "hidden setting" to adjust it on the EA6500. 

  • Help, please - Combined Limits and Expressions for Insurance Plans

    I seem to be configuring something incorrectly using the Combined Limits and Expression in the IMG.  I was wondering if somebody has used this successfully and can give me some pointers?  I've used it successfully when I've limited a plan to coverage of not more than 50% of the coverage for another plan, but I can't seem to get it to work for my current requirement.  Here is my current requirement:
    I have 2 life insurance plans, one basic and one supplemental.  The supplemental can only be elected if the basic plan is elected, so the basic plan would be the priority plan.  The individual maximum allowable coverage amount for each plan is $3,000,000, which is configured under the coverage rules.  However, the combined limit between the 2 plans is also 3,000,000.  A person can have the basic plan only and have the full 3 mil, or they can have both plans and must not go over the 3 mil between the 2 plans.  The basic plan is 1x but the supp plan can be 1x - 8x so it is very possible that the basic will not hit the limit, but the supp will. 
    I tried to set the combined limit of 3,000,000 for the 2 plans using the 2 pieces of the combined limits config, but I've tried everything, and it does not cut them back.
    Can anyone tell me step by step how to configure this, or do I need to enable and develop a user exit?
    Thanks!
    Lisa

    Hi, Lisa
    This should not be a problem.
    Firstly, have you set the Basic plan as a corequisite for your optional plan?
    Benefits--> Flexible Administration -->Prerequisites and Corequisites --> Define Corequisite Plans;
    Choose your secondary plan from the drop-down; then define your primary plan as the corequisite.  In most instances, selecting the 'Any plan required' radio button  should to the trick.
    Now for the combined limits:
    This is a 2-step process.
    1:  Define Combined Coverage Limits.
    Choose your Optional life plan, and enter the following:  Limit Amount -- 3,000,000; Rel. Operator :  >=
    REPEAT FOR BASIC PLAN AS WELL!!!!
    When you save this, your resulting screen should read something like this :  OPTL     Optional Life Limit   3,000,000   0.000  >=
    2:Define Combined Coverage Limit Expressions
    Select your Optional life plan.
    Enter the following in the table:
    1.00  |  Basic Life Plan
    1.00  |  Optional Life Plan
    Again, do the same for the Basic plan.
    the combination of these two steps  creates the following equation:
    3,000,000 >= 1* Basic Life + 1* Optional Life.
    Feel free to ping me if you have questions.   Contact details are on my business card.
    Rob
    Select your Optional life plan

Maybe you are looking for