Segregation of testing and the production environments- Oracle EBS implementation project

I am currently auditing a oracle EBS implementation and I need to test the segregation of testing and the production environments, How can I approach that ?

In Oracle EBS environments TEST and PRODUCTION are different systems altogether, you can say two entities which are identical in features/data but physically different. So you may have to test on below
1.) DB level passwords (different in both instances) and are following the statndard corporate policies.
2.) Unwanted application users are end-dated in TEST instances.
3.) Data is masked appropriately in TEST instances.
regards
PRavin

Similar Messages

Oracle EBS Implementation Help

Hello Everyone,
Greetings of the day!!!!
Professionally i am a technical consultant with only 12 months of experience, Now i got chance to enhance my technical knowledge in Oracle EBS Implementation project.
I am totally fresh for this Implemenation as i dont have any idea, what will be the things in implemention. I request to OTN people, please give me some guidelines, as how can i go about it, where i need to concentrate.
Any help would be appreciated.
Thanks.
Atul
Edited by: Atul on Jul 1, 2011 12:00 PM

Oracle Apps documentation can be found at http://www.oracle.com/technetwork/documentation/applications-167706.html
Please old see old threads for similar discussion (refine the search by typing the module(s) you are planning to implement) -- http://forums.oracle.com/forums/search.jspa?threadID=&q=Implementation&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
You could also Google it and you will find many blogs which should be helpful.
Thanks,
Hussein

How to use the rescue and recovery, and the product recovery discs ?

Hi everyone,
I've just recently became a new owner of a T61, and really enjoying it. I haven't had a chance yet to test-drive the lenovo phone support, as I have not yet screwed anything up that bad that required their help. I did try a clean factory reinstall from the service partition and it worked great. I would like to find out, how does one use the rescue and recovery startup disc, and the product recovery discs that I created myself? From my previous experience with Dell and HP, I only had to insert the first one and restart the computer, and the rest followed. But with ThinkPads, if I ever wanted to bring it to a clean factory state using those discs, do I use rescue and recovery first, followed by the product recovery? I'm curious, what is the difference between the two?
T61 (7658CTO), T9300, 3GB, 250GB, XP Pro
Solved!
Go to Solution.

blake_ibm wrote:
Hi! I'm blake
There is no diff between the two... One is on the Hard Drive and the other on CD/DVD.
Having the HDD version (pre-installed) is a good for trouble shooting. It uses a whole diff O/S on a whole diff partition (not C.
So if you are having problems and boot to RnR (via F11), and those problems go away. you know your issue is software related. If you still have the same problems probly Hardware related... IT IS AN EFFECTIVE WAY TO TAKE WINDOWS OUT OF THE PROBLEM.
Other then that. You can re-image another HDD from disks, you can't do that with the F11 version.
dose all that make sense?
Hi blake_ibm,
Thanks. All this makes perfect sense to me, but that's not what I'm asking for. My question is this: if I wanted to bring my notebook to its factory shipped condition using my recovery cd's, how do I do that? Do I insert cd1 first and then restart the notebook, or do I just insert it without restarting it, or perhaps I should use first the rescue and recovery?
You said that there is no difference between the two, but what two are you talking about man? I am not comparing cd recovery to partition recovery. I am talking about rescue and recovery cd, with system recovery cd's. These are the two things that I'm talking about.
I'm really grateful for all replies, but please people, read the question first !!!
I would really appreciate if someone could explain the steps involved in performing a clean factory recovery, using the cd's, and not the recovery partition. I just want to know for the future, in case one day I have to do it. That is all I'm asking.
T61 (7658CTO), T9300, 3GB, 250GB, XP Pro

A required application library failed to load and the product cannot continue

Seems like I go through this problem time and again with Photoshop + Acrobat CS2 and still have yet to resolve a way of fixing it short of completely wiping my drive and re-installing Windows (XP Pro) The error is "application library failed to load and the product cannot continue"
If there is anyone out there that has figured out a way to fix this issue please fill me in.
This time I went as far as a complete and though removal of all Adobe products from the system and the registry and then completely reinstalled the product.
I have forgone purchasing CS3 because of this issue as I am 99% sure that it has still not been resolved.
Basically Photoshop and Acrobat are useless at this point and I am using an old version of Picture Publisher and Macromedia Fireworks to complete my work. This I assume is good advertising for Adobe :)
Anyone have any ideas????
See this post in the forum "could not complete your request because of a program error", PDF format, cs2, xp" as this is an ongoing Adobe issue that they have completely blown off!
I am working on
Adobe Photoshop Version: 9.0.2 (9.0.2x296)
Operating System: Windows XP
Version: 5.1 Service Pack 2
System architecture: Intel CPU Family:15, Model:2, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, HyperThreading
Physical processor count: 1
Processor speed: 2798 MHz
Built-in memory: 2559 MB
Free memory: 1812 MB
Memory available to Photoshop: 1758 MB
Memory used by Photoshop: 55 %
Image cache levels: 6
Serial number: XXXXXXXXXXXXXXXXXX (I have a legal copy)
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS2\
Temporary file path: C:\DOCUME~1\JIMSHE~1\LOCALS~1\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 128.0G, 65.5G free
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS2\Plug-Ins\
Additional Plug-ins folder: not set
Installed plug-ins:
ADM 3.10x21
ASDStrm 1.03x2
Accented Edges 9.0
Angled Strokes 9.0
Average 9.0 (9.0x196)
BMP 9.0 (9.0x196)
Bas Relief 9.0
Camera Raw 3.7
Chalk & Charcoal 9.0
Charcoal 9.0
Chrome 9.0
Cineon 9.0 (9.0x196)
Clouds 9.0 (9.0x196)
Color Halftone 9.0 (9.0x196)
Colored Pencil 9.0
CompuServe GIF 9.0 (9.0x196)
Conditional Mode Change 9.0 (9.0x196)
Contact Sheet II 9.0 (9.0x196)
Conté Crayon 9.0
Craquelure 9.0
Crop and Straighten Photos 9.0 (9.0x196)
Crop and Straighten Photos Filter 9.0 (9.0x196)
Crosshatch 9.0
Crystallize 9.0 (9.0x196)
Cutout 9.0
Dark Strokes 9.0
De-Interlace 9.0 (9.0x196)
Difference Clouds 9.0 (9.0x196)
Diffuse Glow 9.0
Displace 9.0 (9.0x196)
Dry Brush 9.0
Embed Watermark 1.70.19
Export Transparent Image 9.0 (9.0x196)
Extract 9.0 (9.0x196)
Extrude 9.0 (9.0x196)
FastCore Routines 9.0 (9.0x196)
Fibers 9.0 (9.0x196)
Film Grain 9.0
Filmstrip 9.0 (9.0x196)
Filter Gallery 9.0
Fit Image 9.0 (9.0x196)
Fresco 9.0
Generic EPS 9.0
Glass 9.0
Glowing Edges 9.0
Grain 9.0
Graphic Pen 9.0
HDRMergeAlign 9.0x001
HDRMergeUI 9.0x001
Halftone Pattern 9.0
Ink Outlines 9.0
Lens Blur 9.0
Lens Correction 9.0
Lens Flare 9.0 (9.0x196)
Lighting Effects 9.0 (9.0x196)
Liquify 9.0
MMXCore Routines 9.0.1 (9.0.1x289)
Merge to HDR 1.0x001
Mezzotint 9.0 (9.0x196)
Mosaic Tiles 9.0
Multiprocessor Support 9.0 (9.0x196)
NTSC Colors 9.0 (9.0x196)
Neon Glow 9.0
Note Paper 9.0
Ocean Ripple 9.0
OpenEXR 9.0 (9.0x196)
PCX 9.0 (9.0x196)
PNG 9.0 (9.0x196)
PNG Icons 1.22x1
Paint Daubs 9.0
Palette Knife 9.0
Patchwork 9.0
Paths to Illustrator 9.0 (9.0x196)
Pattern Maker 9.0 (9.0x196)
Photo CD 9.0 (9.0x196)
Photocopy 9.0
Photomerge 9.0 (9.0x196)
PhotomergeCylmap 9.0 (9.0x196)
PhotomergeRender 9.0 (9.0x196)
PhotomergeUI 9.0 (9.0x196)
Picture Package 9.0 (9.0x196)
Picture

John,
foud your message very helpfull. I experience the same problem when strating a CS2 program (Photoshop, Indesign,...) over a terminal server connection.
It's weird because starting more than one instance is possible (despite what's written in the article ) as long as the users have administrative rights. I've encountererd this problem because my daughter of 11 wants to use Photoshop now. I have a terminal server set up so the kids may experiment with their own desktops whithout the risk to screw it up and because I can access all my programs from wherever I want.
But as I found out now I must buy volume licensing instead of retail (even if it's for just one instance...)
Want to know if possible how "difficult" it was to change your retail to a volume licensed version? Did you have to pay the full amount again? Hope an upgrade exist from Creative Suite CS2 - retail to Creative suite CS3 - volume licensed for the same price as from retail to retail... Or am I hoping to much?
Kind regards and thanks for your info,
Patrick

"An error has been detected with a required application library and the product cannot continue. Please reinstall the application.

I have received the following error message from my Adobe Acrobat Pro X1 after installing the CS6 package :, "An error has been detected with a required application library and the product cannot continue. Please reinstall the application.
I am now unable to open any pdf?
Any words of advise here how to fix this problem?
Thanks!

** Moved to Acrobat Forums for quicker and accurate resolution steps ***

An error has been detected with a required application library and the product cannot continue. Plea

I am getting the following error each time I open Adobe Acrobat 7.0 Professional...
"An error has been detected with a required application library and the product cannot continue. Please reinstall the application."
I have tried uninstalling and then reinstalling the program. It didn't help, got the same error shortly after opening the program.
What is strange is that the problem just suddenly appeared therefore, I believe that it may have been malware related causing this problem. And I have had this program and have been using it without any problems now for over 3 years.
It appears that a vital part of the program is being blocked.
Can anyone please help and offer a detailed solution to this problem? Maybe someone has already encountered it.
Thank you!
-Dan Sacapano

Anoop,
Upon re-reading that information, I am curious as to why your believe that this will solve my issue. That is not related to my error message: "An error has been detected with a required application library and the product cannot continue. Please reinstall the application."
I have not received any such message as the one seen on that page.
Please explain why I wouldn't have gotten that partcular message and instead got the one I quoted above?
Thank you,
-Dan

While i was updating it was failed for 3 times and then i started to update it again and then it was showing as the product verification could not be verified and the product verification may be damaged or not signed

while i was updating it was failed for 3 times and then i started to update it again and then it was showing as the product verification could not be verified and the product verification may be damaged or not signed

Mavericks installer can’t be verified
Mavericks Installer can’t be verified (2)
Try running the combo update.
10.9.2

Is it possible to test a text in a Oracle ebs form ...?plz help me..

Hello,
Is it possible to test a text in a Oracle ebs form ...?
If possible then please tell me. It is working in Http /web based application.
and table test is possible.. in Oracle ebs form?. Is it possible to capture a data from a text field and make comparison to check it. Though i want it all to be done in Oracle Ebs forms .
Please help me..
Regards
Srinivas
Edited by: 850579 on Apr 26, 2011 7:30 AM

Hi,
Thank u Alex i have tested with object test its working. I have got the result. can u tell me is it possible to insert table test in oracle ebs forms.
can we insert iteration in the middle of the script.
Regards
Srinivas

How to check ,how many users are logged in and logged out in oracle ebs 11i/R12.

Hi Experts,
Kindly let me know
how to check ,how many users are logged in and logged out in oracle ebs 11i/R12.
Also, in the database level too ,Do we need to write any trigger for this?
Thanks in advance.

Hi,
How to check ,how many users are logged in and logged out in oracle ebs 11i/R12.
Please check the following links:
Oracle EBS - Number of Users logged into EBS / Oracle Applications currently
List all users currently logged in on Oracle EBS
Also see forum Search:
Forum Search: Logged In EBS User
Also, in the database level too
Please see:
https://forums.oracle.com/message/9225094#9225094
Do we need to write any trigger for this?
Yes you may, But I personally suggest you not to do so as it may affect performance.
Thanks &
Best Regards,

Updating test database from production in Oracle 10g

What will be easiest way to have production database replicated to test database once a day basis? The 2 databases are on similar machines & same OS

What sort of test system are you building? Are you building a reporting server so you can run reports on a snapshot of the data? Are you building a staging environment where you can test applying scripts and can simply reapply the DDL changes every day? Or do you have a real testing instance which will generally have slighly different table definitions/ objects/ etc than the production instance?
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

How to put sales incentive bonus % amount and the period in oracle

How do I put in the sales incentive % and the period?
we put in the bonus amount (I know how to do that in Oracle), but I cannot find where to do my inputs for the % and the period concerned (all sales incentive bonuses are paid over certain quarters of the year – e.g. I now have to make inputs on the sales incentive bonuses for quarter 1 till 3). It is essential for us to track amounts, % and period.
We also had this opportunity in People Soft and I assume that we do have that in Oracle
any help would be highly appreciated
thanks in advance

some more context would be useful. Are you implementing core payroll, or CWB, or you just want to store these sales figures in basic HR? Or self-service?

Different features between captivate trial version and the product itself

Hi everyone,
Can you please share me the feautres that are included in
adobe captivate 3 product but not included in trial version.

Hi Karen
The only difference is the time in which you have to use it
and the fact that during the trial period, any projects you create
using the trial will automatically have an expiration date
configured that you can't disable until you purchase the license.
Once you do that, the check box that allows you to disable the
expiration date for the project will work.
Hopefully that helps... Rick

Daily, weekly and monthly acitivities in Oracle EBS 11i

Hi All,
I need to know the daily, weekly and monthly maintainance activities for Oracle EBS 11i .
tq

user_exit wrote:
Hi All,
I need to know the daily, weekly and monthly maintainance activities for Oracle EBS 11i .
tqthis is not forum for EBS, so please post in
General EBS Discussion
Thanks

How to allocate the processor to oracle ebs instances

dear all
we are using solaris 10 on sparc t3 server.
we want to allocate some processor to oracle ebs instances for the multi instance environment
so please suggest us how should we go for it..
regards

In addition to the above, increasing the number of processors should not impact the functionality of the application and your only concern should be the licensing, and for this matter you will need to contact your Oracle sales representative.
http://www.oracle.com/us/corporate/pricing/price-lists/index.html
Global Pricing and Licensing
Thanks,
Hussein

How to Install and Configure Discoverer with Oracle EBS R12

Hi,
We are using ,
Oracle EBS Application Version: 12.1.1
Operating System Version : OEL 5.6
Database Version : 11.1.0.7
We want to install Discoverer on Server where EBS R12 is installed. After doing initial analysis found that we need to install Application Server before installing Discoverer.. Is it right ?
If yes then which Application Server version we need to download? can anyone post guidelines about Application Server version, place from where i can download it and installation guide ?
Thanks,
Priyanka

Thanks to all of you for your valuable guidance.. We are planning to install WLS. Meanwhile i came across one document saying EUL is pre-installed for Vision instance.
For connecting to EUL_US i have installed Discoverer Administrator and Deskop (10.1.2) on my win 7 machine. After that did following steps,
1. Create folder under ORACLE_HOME (D:\oracle\BIToolsHome_1\secure)
2. Copied DBC file from $INST_TOP/appl/fnd/12.0.0/secure to "D:\oracle\BIToolsHome_1\secure" folder
3. Copied TNS entry of EBS R12 at tnsnames.ora file
4. Created environment variables FND_SECURE (D:\oracle\BIToolsHome_1\secure) and FND_TOP (D:\oracle\BIToolsHome_1)
Tried to connect to Discoverer Administrator using Database User like SYSTEM and able to connect. But when tried connecting to Discoverer Administrator or Desktop using Application user then got following error,
"Unable to connect to: cbrown@vis
Failed to connect to database - Unable to connect to Oracle Applications database: invalid username/password"
After doing some analysis on this error using Metalink and Forum made following changes,
1. Set System Profile value "Signon Password Case" to "Insensitive".
2. Updated value if the parameter "s_aapserverid_authenticate" from "SECURE" to "OFF" in context file and after that executed autoconfig.
Still not able to resolve the issue.. Can anyone guide me on this ?? So that i will be able to access Discoverer Desktop using my Vision instance Application users.
Regards,
Priyanka

Segregation of testing and the production environments- Oracle EBS implementation project

Similar Messages

Maybe you are looking for