Select a column based on a criteria
Hi!
I am working on a marketing dw. The customers table have information about the address of customers. There are two type of addresses- home and mailing. A customer can have both or one of the type of address. In a demographic report I have to find the number of customers by state and city. The requirement is to create a report based on home address, if home address is not available we can use mailing address.I tried CASE function with no results. How can I get this logic to work?
Thanks,
-D
Hi!
I am working on a marketing dw. The customers table have information about the address of customers. There are two type of addresses- home and mailing. A customer can have both or one of the type of address. In a demographic report I have to find the number of customers by state and city. The requirement is to create a report based on home address, if home address is not available we can use mailing address.I tried CASE function with no results. How can I get this logic to work?
Thanks,
-D
Similar Messages
-
Counting columns based on set criteria?
Hello gurus,
I've been trying for the past hour to count the number of columns that have a certain condition met, that is two check boxes are ticked.
For example:
I want to count the number of columns where both Apples & Oranges is TRUE.
I've tried combinations of SUMIF, COUNTIF, IF, & COLUMNS and really don't have a clue. Searching the web for Excel examples doesn't help and I can't find anything like this on this forum.
Any help would be much appreciated.
Regards,
Dr Paul MartinThe closest I've been is this:
=COUNT(AND(Table :: Apples,Table :: Oranges))
The AND function only generates one result (TRUE/FALSE) which I convert to a number (1/0) with the COUNT function.
The problem is that I can't count a range of columns that meet this criteria.... it will only give me one result not the total number of positive results.
What I need is something like this:
=COLUMNS(AND(Table :: Apples,Table :: Oranges))
Except that generates an error "COLUMNS requires a range but found a boolean instead". I guess I can't mix them up?
Regards,
Dr Paul Martin
Message was edited by: nitramluap -
How to select few columns based on certain conditions
i have a table with n columns, of which in 2 columns each may have similar values for certain number of rows
i want to find if one of the entries in a column has same value in the next few rows
For example the two columns are
supplier_name supplier_code
hll 013
hll 013
hll 013
hll 013
if i first encounter hll with 013 i have to check whether hll with 013 record is further available
if it is so i have to display the columns for which multiple entries is available
can anyone send the queryDuplicate thread?
selecting certain columns in oracle -
How do you lookup multiple values in different columns based on variable criteria?
Essentially, I'd like to be able to do a Vlookup but instead of searching for one value only, search for multiple values in separate columns. A smaller version of my current spreadsheet as an example...
Attack Type ->
Fire
Water
Grass
Fire
1/2x
2x
1/2x
Water
1/2x
1/2x
2x
Grass
2x
1/2x
1/2x
Fire/Water
1/4x
1x
1x
Fire/Grass
1x
1x
1/4x
Grass/Water
1x
1/4x
1x
The headers are the attack types and the list of types to the left are the receiving Pokemon. Fire does half damage (1/2x) to fire types, Water does double damage (2x) to fire types, etc. I'd like to be able to search for specific damages for each type. For example, I'd like to find a Typing that recieves half (1/2x) damage from Fire-type attacks but also recieves double (2x) from Grass-type attacks. I do want more than just two search criteria though seeing as the actual table is much, much larger.
I've tried assigning number values to each damage multiplier and then merging all of them together for a specific typing and doing a VLOOKUP based on checkboxes determining what damage multiplier I want in a few specific types, the rest being filled in to the standard of 1x but the result isn't correct most of the time.Hi Mitchell,
VLOOKUP can be set for accept either an 'exact match' or a 'close match'. Your 17 digit 'number' is actually a 17 character text string (Numbers can handle numbers to a precision of only 15 places). Provided all 17 digits are present, sorting should be the same as for numerical values—the leftmost character is the most significant.
As a text string, your 'number' is sorted/evaluated alphabetically. A 'close match' accepts the 'largest value that is less than or equal to the search value'.
If your search term is 000200000 (a 9 character string), several 'wrong' answers will fit the 'close match' criteria, including all of those listed below:
000200000 (the 'correct' match)
0000xxxxx (x may be any of the three acceptable values)
0001xxxxx (x may be any of the three acceptable values)
The main problem here is that digits in a number (or characters in a text string) have decreasing significance related to their distance from the beginning of the string/number. You want a search in which each character has the same significance as each of the others when compared to the search key. To do that, you need to compare each character in the search string with the character in the same position in the similar string for each type of Pokemon, then take a count of the matches or a sum of the differences.
Here's one approach:
Column A contains labels.
Column B, the 17 digit search term, created in whatever manner you wish, and the similar 17 digit string for each of the characters.
Columns C through S contains a formula that detines, using subtraction, the difference between each digit of the search term and the corresponding digit of each character's profile.
Column C uses SUM() to calculate the total of columns C to S for each row.
T1 uses =MIN(T) to calculate "least different" profile.
Column A is a Header column; Row 1 is a Header row.
Formulas:
C2, and filled right to S2, then down to the last row of data:
=ABS(MID($B$1,COLUMN()-2,1)-MID($B2,COLUMN()-2,1))
T1: =MIN(T)
T2, and filled down column T: =SUM(C2:S2)
The conditional formatting rule set for all body cells in column T is shown below the table.
This may be enough to get you started. Formulas can be tweaked to produce results more closely matching what you're looking for, if necessary.
Regards,
Barry -
Disclaimer: I'm not a computer guy but I can be taught!
I am tracking a checking account for a church ministry. I have one table that holds the line items and the amounts budgeted for each item. I want to add a column to that table that shows the actual amount spent for that line item. The reference will come from the second table that contains that actual data. I have a column that has a dropdown list to select the budget line item and a column that holds the actual amount spent for that transaction. I want to auto sum the selected currency values based on the selection criteria of the certain budget line item and display it in the first table.
Any help would be appreciated.Hi wcanerday,
Thanks for the green tick and your feedback. Yes, the SUMIF function is powerful!
When you adapt the Personal Budget template, make sure that the items in the Category Column (A) on the Budget sheet exactly match the items in the Pop-Up Menus in Column C of the Transactions sheet.
Editing a Pop-Up Menu in Numbers 3 is easy. Please call back if you need more help.
Regards,
Ian. -
How to update all the record for a particular column in a table based on search criteria.
Hi All,
I am new to ADF. I have a requirement, where i have to perform mass update on a table.
Scenario:
Ex: I have a dept manual search region. where i search with deptId: 20. I get 20 records in my table. now i have another region where i have a inputchoice list which contains all the columns names that exists in dept table. Beside that i have a input text box and an update button
Now user, first searches with dept id:20 and clicks on search button, where it shows 20 record in the table. He then select a column from input choicelist(ex: ManagerId), then enters new value in the input box(ex: abc) then clicks on update button.
Now i want, all the records in the ManagerId column with dept id:20 to be updated with the new value "abc"
Can anyone help me with the code.
Thanks in advance..Hi,
If you go to your VO and generate the ViewObjectImpl, in there you can create a method which will contain two parameters, 1 the attribute name and 2 the value.
Then you can follow something like explained in this post:
ADF Tutorial: How to apply bulk actions to a view object rows
The only difference is that you will need to create a method like this:
public void updateAttribute(String attribute, Integer value){
RowSetIterator iter = createRowSetIterator(null);
while (iter.hasNext()){
Row row = iter.next();
row.setAttribute(attribute, value);
Then you expose that as a client interface and then after you filter your table by your criteria you just need to execute this method passing the right parameters.
Regards -
How can i dynamically select columns based on the input parameter?
I have an input parameter which takes single numeric value.
Based on this value i have to dynamically select table-columns .
For eg: if i have following fields in my table :
SEM_1
SEM_2
SEM_3 and SEM_4.
And if i give numeric input as 2 , then i have to select "SEM_2" column only.
if the input is 3 then i have to select "SEM_3" only and leave the rest of the columns.
how do i achieve this dynamic feature in the "Select ..... From...... table...." statement in the ABAP??Hi,
you should try something like this.
TYPES: cond(72) TYPE c.
data: condtab TYPE TABLE OF cond,
condw type cond.
data: lv_field(30) type c value 'SEM_'.
write p_num to lv_field+4(1).
condw = lv_field.
append condw to condtab.
SELECT (CONDTAB) FROM table INTO.....
Kostas
Message was edited by:
Kostas Tsioubris -
Selecting a column in Answers report based on user prompt/ apply filter
I need to do the following in OBIEE Answers report (version 10.1.3.4.1):
1) Think of a simple table with dim TX_type and some measures like month_jan, month_feb, month_mar
so the fact table looks like (column names) tx_type, month_jan, month_feb, month_mar
2) I need to select the measure column based on a user dashboard prompt, prompt populates a presentation variable var_month = jan or feb or mar
3) I need to select the correct measure (one of these month_jan, month_feb, month_mar) and then apply column filter based on the dim TX_type to split the values of these into multiple columns for report. So the report may look like (in Answers)
Sales , Tax, overheads
where Sales may be defined as sum(month_jan) where rows have TX_type = 'sales'
where Tax may be defined as sum(month_feb) where rows have TX_type = 'tax'
where overheads may be defined as sum(month_mar) where rows have TX_type = 'overheads'
IF the user selects jan
IF user selects Feb then the 3 report columns are based on month_feb and likewise for month_mar
I cannot use column selector option as the report column further apply filter in column filter definitions in Answers...
4) When I try to build the column filter using a presentation variable (var_month), the presentation variable is not getting populated in the column filter.
For e.g. IF var_month = 'jan'
THEN month_jan (let us assume the logical column name is month_jan too)
ELSE month_feb and so on...
However, the var_month always shows 0 in the IF clause. If we used a repository variable instead, it works fine. But since repostory variable cannot be changed on the fly (by user prompt) it is not usable.
We cannot change fact table defintion....and we have 12 measures column and about 8-10 different colum filter based report columns using this measure.Hi shyamvaran,
have you thought about a SQL statement in the prompt, something like:
SELECT
case when 1=0 then Table."Column" else 'Jan' end
FROM "Subject Area"
union
SELECT
case when 1=0 then Table."Column" else 'Feb' end
FROM "Subject Area"
union
SELECT
case when 1=0 then Table."Column" else 'Mar' end
FROM "Subject Area"
union
SELECT
case when 1=0 then Table."Column" else 'Apr' end
FROM "Subject Area"
etc...
Use this to give you the 12 values for your months then give the prompt column a presentation variable name and set a default value in the 'Default To'. Also set the same default value for the filter.
A couple of points:
1. If you're transforming the presentation variable from 'Jan' to 'month_jan' you may need to edit the syntax for the filter column (not using the dialog box).
2. If you're transforming the behaviour of a dimension / measure column in the report, have you specified the syntax correctly, e.g. sum('@{pres_var}')?
Hope this helps,
Justin -
SP2013 Is it possible to show/hide columns based on column selections?
SharePoint 2013
I have a lists with a school district selection choice column (refer to as column A). Then I have three other columns with schools based on district. What I would like to do is only show schools in a certain district based on what district
is selected in column A. Can anyone tell me if this is possible and if so, how can i acheive it?It generally takes a little script to get the cascading right;
http://sharepoint-works.blogspot.ch/2012/02/cascading-dropdown-or-filtered-values.html
https://www.youtube.com/watch?v=70-hXWY6ARY
InfoPath is another possibility. Are you using that?
w: http://www.the-north.com/sharepoint | t: @JMcAllisterCH | YouTube: http://www.youtube.com/user/JamieMcAllisterMVP -
Dynamically display title based on value selected in column selector
Hi All,
Can it be possible to show the report title dynamically based on value selected in column selector . suppose i have two column status and region . When i will select status in the column selector the title of the report will show " Status Summary" when i will select region then the title will change to "Region Summary". Please help me...Hi,
create dashboard prompt with column selector functionality like following way
write the following query in your dashboard prompt sql results
select region name from subject area name
Union all
select sub_region name from subject area name
like this and put one presentation variable for this dashboard prompt like var1
in your report write formula in your column like this *case when @{var1)='region column' then 'Region Summary' else ' ' end*
and refer this column in narrative view like @1 then narrative act like a title view.
Hope this helps you
Regards
Naresh -
Dispaly or Hide a column based on Prompt Value
Hi All,
How can I Display or Hide a Column based on Prompt Value selected?
On my dashboard I have a Report/Request and a Dashboard Prompt.
Dashboard Prompt has three values, say: *'A', 'B' and 'C'*.
And my report/request has three columns named *'Field1', 'Field2'* and Field3'.
What I am trying to achieve is that whenever user selects prompt values as *'A' or 'B'* all the three fields on my report named *'Field1', 'Field2' and Field3'* should be displayed, however whenever user selects prompt values as *'C'* only fields named *'Field1' and 'Field2'* should be displayed.
Thanks,
DeepakHi Bhavna,
I tried using View Selector, however I am not able to achieve the required functionality with that.
I created a Request with 3 columns in it, then I switched to criteria and added another table to that. The new table automatically got the similar 3 columns used in the first report. Now when I tried to delete one of those columns from the new report, it also got deleted from the first report.
All the views are dependent, changes made to one are reflected in other.
Can't figure it out, where am I going wrong?
Thanks,
Deepak -
Display LOV based on view criteria
Hi,
I have a SelectOneChoice list in the table column. I want to display its items dynamically based on view criteria. So that when i select a row in the table, the list should have only filtered items.
I am using Jdeveloper version 11.1.1.6.0. Below is the code for SelectOneChoice list.
<af:selectOneChoice value="#{row.bindings.IntegrationName.inputValue}"
label="#{row.bindings.IntegrationName.label}"
required="#{bindings.ManageProjectIntegration1.hints.IntegrationName.mandatory}"
shortDesc="#{bindings.ManageProjectIntegration1.hints.IntegrationName.tooltip}"
id="soc5"
readOnly="#{row.EnabledFlag eq 'ACTIVE' or backingBeanScope.managed_ManageProjectIntegrationBean.singleIntegration}"
valueChangeListener="#{backingBeanScope.managed_ManageProjectIntegrationBean.validateIntegrationName}"
binding="#{backingBeanScope.managed_ManageProjectIntegrationBean.integrationChoiceList}"
autoSubmit="true" valuePassThru="false"
immediate="false"
contentStyle="width:180.0px;">
<f:selectItems value="#{row.bindings.IntegrationName.items}"
id="si7"/>
Thanks
HarishHarish,
Have you tried creating a model driven list by using the view criteria?
http://www.baigzeeshan.com/2010/03/how-to-create-adf-lov-with-view.html
-Arun -
Hi Gurus,
Can i hide column based on Prompt value?
My requirement is
I have report is showing Daily/Weekly/Monthly data based on prompt value ( Prompt selected values are Daily/Weekly/Monthly)
If user select daily then report will display data every day. if user select Weekly then report will display Every week data ( Week start from Monday).
I have one more columns as Day name to display day of the week for daily report. its working fine.
but i want hide day name column when i run report for weekly.
How can i hide column based on Prompt value. is it possible in OBIEE 10.3
really appreciated for your helpHere's simpler approach. Use column selectors.
1) The first column in your column selector will be where you put your Daily/Weekly/Monthly choices.
2) In the second column, put your Day column. Add another column, doesn't matter what. I'll explain later. In the caption for this column, put in something like "Select to Hide Day column."
3) Click "OK" and put your column selector in your Compound Layout.
4) Now, select the other column in place of the Day column.
5) Now go to the criteria tab. The "second choice" column should now be there in place of the original first column. Dummy out this column and click on the "Hide" checkbox in the column properties. Change the name to "No column."
6) Now go back to Results. The user now has two choices for the Day column, either the original column (the Day column) or the "No column" choice. When the "No column" choice is selected, the column disappears from the report. Users can make the selection whenever they choose Weekly as their choice. -
View with columns based on function - problem with query
Hi,
I'm using Oracle 9i;
I've created a view which has columns based on a table columns (multiple columns from 1 table) and funtion (multiple columns based on 1 function).
The function takes ID as the first argument and name of the column to determine which value to return as the second one.
Here is a sample of such function (simplified):
FUNCTION my_function
(in_id IN NUMBER, in_col_name IN VARCHAR2)
RETURN VARCHAR2
IS
c_name VARCHAR2(100);
c_last_name VARCHAR2(100);
BEGIN
SELECT T.NAME, T.LAST_NAME
INTO c_name, c_last_name
FROM TABLE_1 T, TABLE_2 Z
WHERE T.PK = Z.FK
AND Z.ID = in_id;
IF in_col_name = 'NAME' THEN
RETURN c_name;
ELSIF in_col_name = 'LAST_NAME' THEN
RETURN c_last_name;
END IF;
END;
For simplicty I've restricted the number of columns.
CREATE OR REPLACE VIEW my_view
(ID, NAME, LAST_NAME)
AS
SELECT
T.ID ID
,CAST(my_function(T.ID,'NAME') AS VARCHAR2(100)) NAME
,CAST(my_function(T.ID,'LAST_NAME') AS VARCHAR2(100)) LAST_NAME
FROM TABLE T;
There is no problem with query:
SELECT * FROM my_view;
The problem arises when I query the view (regardles of '=' or 'LIKE'):
SELECT * FROM my_view
WHERE name LIKE '%some_part_of_name%'
The query returns rows for same names, for same it doesn't. If I put '=' and the whole name the query returns nothing, but when I put 'LIKE' and the first letter it returns rows in some cases.
I've tried to debug this situation and I've discovered that the function recives ID not in the proper order and not the same amount of times - in explicit:
for each ID in (1, 2, 3, 4, 5, 6, ... , 100) the function should be called twice for each ID and in the same order, but it does not.
I get 1, 1, 2, 3, 3, 6, 20, 20 and so on.
Help needed.
Greetings.The problem is more complicated than the solutions provided here.
The reason why I'm using the function is this:
the original view was constructed using multiple union all selects and the speed was terrible. I've created the index on the base table to obtain a proper sort. For retriving all records at once the view works perfectly, but if one wants to query by columns based on function the results are suprisng - sometimes there are, some times there are none, or if you serch with "like" and only a part of string there are results, but with "=" there are no results.
Here are real DDLs:
View:
CREATE OR REPLACE VIEW V_DOK_ARCH
(ID_ZDAR, TYP, STAN, DATE_CREATED, CREATED_BY,
DATE_MODIFIED, MODIFIED_BY, SPRA_ID_SPRA, PODM_ID_PODM, PODM_UMOW_ID_UMOW,
NR_WFS, WFS_NR_INTER, UWAGI_OPER, FUNDUSZ, NUMER,
DATA_PODPISANIA, RODZAJ, TYP_PRZY, TYP_UBEZ, NAZWISKO,
IMIE, IMIE_OJCA, NAZWA_FIRMY, NAZWA_FIRMY_SKR, DANE_KLIE)
AS
SELECT /*+ INDEX(Z ZDAR_DATE_CREATED_DESC_I) */
Z.ID_ZDAR ID_ZDAR
, Z.TYP TYP
, Z.STAN STAN
, Z.DATE_CREATED DATE_CREATED
, Z.CREATED_BY CREATED_BY
, Z.DATE_MODIFIED DATE_MODIFIED
, Z.MODIFIED_BY MODIFIED_BY
, Z.SPRA_ID_SPRA SPRA_ID_SPRA
, Z.PODM_ID_PODM PODM_ID_PODM
, Z.PODM_UMOW_ID_UMOW PODM_UMOW_ID_UMOW
, Z.NR_WFS NR_WFS
, Z.WFS_NR_INTER WFS_NR_INTER
, Z.UWAGI_OPER UWAGI_OPER
, Z.FUNDUSZ FUNDUSZ
, CAST(F_Rej_Zdar_Char(Z.ID_ZDAR, 'NUMER') AS VARCHAR2(30)) NUMER
, F_Rej_Zdar_Date(Z.ID_ZDAR, 'DATA_PODPISANIA') DATA_PODPISANIA
, CAST(F_Rej_Zdar_Char(Z.ID_ZDAR, 'RODZAJ') AS VARCHAR2(4)) RODZAJ
, CAST(F_Rej_Zdar_Char(Z.ID_ZDAR, 'TYP_PRZY') AS VARCHAR2(4)) TYP_PRZY
, CAST(F_Rej_Zdar_Char(Z.ID_ZDAR, 'TYP_UBEZ') AS VARCHAR2(3)) TYP_UBEZ
, CAST(F_Rej_Zdar_Char(Z.ID_ZDAR, 'NAZWISKO') AS VARCHAR2(30)) NAZWISKO
, CAST(F_Rej_Zdar_Char(Z.ID_ZDAR, 'IMIE') AS VARCHAR2(30)) IMIE
, CAST(F_Rej_Zdar_Char(Z.ID_ZDAR, 'IMIE_OJCA') AS VARCHAR2(30)) IMIE_OJCA
, CAST(F_Rej_Zdar_Char(Z.ID_ZDAR, 'NAZWA_FIRMY') AS VARCHAR2(300)) NAZWA_FIRMY
, CAST(F_Rej_Zdar_Char(Z.ID_ZDAR, 'NAZWA_FIRMY_SKR') AS VARCHAR2(100)) NAZWA_FIRMY_SKR
, CAST(LTRIM(F_Rej_Zdar_Char(Z.ID_ZDAR, 'NAZWISKO')||' '||F_Rej_Zdar_Char(Z.ID_ZDAR, 'IMIE')||' '||F_Rej_Zdar_Char(Z.ID_ZDAR, 'IMIE_OJCA')||F_Rej_Zdar_Char(Z.ID_ZDAR, 'NAZWA_FIRMY')||DECODE(F_Rej_Zdar_Char(Z.ID_ZDAR, 'NAZWA_FIRMY'),NULL,F_Rej_Zdar_Char(Z.ID_ZDAR, 'NAZWA_FIRMY_SKR'),NULL)) AS VARCHAR2(492)) DANE_KLIE
FROM T_ZDARZENIA Z
WHERE F_Rej_Zdar_Char(Z.ID_ZDAR, 'JEST') = 'T';
and functions:
CREATE OR REPLACE FUNCTION F_Rej_Zdar_Char
(WE_ID_ZDAR IN NUMBER
,WE_KOLUMNA IN VARCHAR2
RETURN VARCHAR2
IS
c_numer T_PRZYSTAPIENIA.NUMER%TYPE;--VARCHAR2(30);
c_rodzaj T_KLIENCI.RODZAJ%TYPE;--VARCHAR2(1);
c_typ_przy T_PRZYSTAPIENIA.TYP_PRZY%TYPE;--VARCHAR2(1);
c_typ_ubez T_PRZYSTAPIENIA.TYP_UBEZ%TYPE;--VARCHAR2(3);
c_nazwisko T_KLIENCI.NAZWISKO%TYPE;--VARCHAR2(30);
c_imie T_KLIENCI.IMIE%TYPE;--VARCHAR2(30);
c_imie_ojca T_KLIENCI.IMIE_OJCA%TYPE;--VARCHAR2(30);
c_nazwa_firmy T_KLIENCI.NAZWA_FIRMY%TYPE;--VARCHAR2(300);
c_nazwa_firmy_skr T_KLIENCI.NAZWA_FIRMY%TYPE;--VARCHAR2(100);
c_jest VARCHAR2(1) := 'T';
c EXCEPTION;
BEGIN
--dbms_output.put_line('id zdar wykonania '||WE_ID_ZDAR);
BEGIN
SELECT p.NUMER, k.RODZAJ,p.TYP_PRZY,p.TYP_UBEZ,k.nazwisko, k.imie, k.imie_ojca, k.nazwa_firmy, k.nazwa_firmy_skr
INTO c_numer, c_rodzaj, c_typ_przy, c_typ_ubez, c_nazwisko, c_imie, c_imie_ojca, c_nazwa_firmy, c_nazwa_firmy_skr
FROM T_KLIENCI k, T_PRZYSTAPIENIA p, T_ZDARZENIA z, T_PODMIOTY D1, T_PODMIOTY D2
WHERE p.KLIE_ID_KLIE = k.ID_KLIE
AND z.PODM_ID_PODM = D1.ID_PODM
AND D1.KLIE_ID_KLIE = p.KLIE_ID_KLIE
AND Z.PODM_UMOW_ID_UMOW = D2.ID_PODM
AND D2.PRZY_ID_PRZY = P.ID_PRZY
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT p.NUMER, k.RODZAJ,p.TYP_PRZY,p.TYP_UBEZ,k.nazwisko, k.imie, k.imie_ojca, k.nazwa_firmy, k.nazwa_firmy_skr
INTO c_numer, c_rodzaj, c_typ_przy, c_typ_ubez, c_nazwisko, c_imie, c_imie_ojca, c_nazwa_firmy, c_nazwa_firmy_skr
FROM T_KLIENCI k, T_PRZYSTAPIENIA p, T_ZDARZENIA z, T_PODMIOTY D
WHERE z.PODM_UMOW_ID_UMOW IS NULL
AND z.PODM_ID_PODM = D.ID_PODM
AND D.KLIE_ID_KLIE = k.ID_KLIE
AND p.KLIE_ID_KLIE = k.ID_KLIE
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT NULL NUMER, NULL RODZAJ,NULL TYP_PRZY,NULL TYP_UBEZ, I.nazwisko, I.imie, I.imie_ojca, I.NAZWA NAZWA_FIRMY, I.NAZWA_SKR nazwa_firmy_skr
INTO c_numer, c_rodzaj, c_typ_przy, c_typ_ubez, c_nazwisko, c_imie, c_imie_ojca, c_nazwa_firmy, c_nazwa_firmy_skr
FROM T_ZDARZENIA z, T_INSTYTUCJE I
WHERE Z.TYP IN ('WFS526','WFS542','WFS553','WFS609','WFS611','WYP_KS','WYP_PO','WYP_SB','DI_ZAT')
AND z.PODM_UMOW_ID_UMOW IS NULL
AND Z.PODM_ID_PODM = I.ID_INST
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT p.NUMER NUMER, DECODE(a.TYP_AGENTA,'A','F','P') RODZAJ, DECODE(a.TYP_AGENTA,'P','R',a.TYP_AGENTA) TYP_PRZY,NULL TYP_UBEZ,a.nazwisko, a.imie, a.imie_ojca, a.nazwa_firmy, a.nazwa_firmy_skr
INTO c_numer, c_rodzaj, c_typ_przy, c_typ_ubez, c_nazwisko, c_imie, c_imie_ojca, c_nazwa_firmy, c_nazwa_firmy_skr
FROM T_AG_AGENCI a, T_AG_UMOWY p, T_ZDARZENIA z
WHERE a.ID_AGAG = p.AGAG_ID_AGAG
AND z.PODM_UMOW_ID_UMOW = p.ID_AGUM
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT p.NUMER NUMER, DECODE(a.TYP_AGENTA,'A','F','P') RODZAJ, DECODE(a.TYP_AGENTA,'P','R',a.TYP_AGENTA) TYP_PRZY,NULL TYP_UBEZ,a.nazwisko, a.imie, a.imie_ojca, a.nazwa_firmy, a.nazwa_firmy_skr
INTO c_numer, c_rodzaj, c_typ_przy, c_typ_ubez, c_nazwisko, c_imie, c_imie_ojca, c_nazwa_firmy, c_nazwa_firmy_skr
FROM T_AG_AGENCI a, T_AG_UMOWY p, T_ZDARZENIA z
WHERE a.ID_AGAG = p.AGAG_ID_AGAG
AND z.PODM_ID_PODM = a.ID_AGAG
AND z.PODM_UMOW_ID_UMOW IS NULL
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT p.NUMER_UMOWY NUMER, DECODE(p.TYP_AGENTA,'A','F','P') RODZAJ, DECODE(p.TYP_AGENTA,'P','R',p.TYP_AGENTA) TYP_PRZY,NULL TYP_UBEZ,p.nazwisko, p.imie_pierwsze, p.imie_ojca, p.nazwa_firmy, p.nazwa_firmy_skr
INTO c_numer, c_rodzaj, c_typ_przy, c_typ_ubez, c_nazwisko, c_imie, c_imie_ojca, c_nazwa_firmy, c_nazwa_firmy_skr
FROM T_AG_KANDYDACI a, T_AG_UMOWY_TAB p, T_ZDARZENIA z
WHERE a.ID_AGKAN = p.TECH_PODM_ID_PODM
AND z.PODM_UMOW_ID_UMOW = p.TECH_ID_AGUMT
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT p.NUMER_UMOWY NUMER, DECODE(p.TYP_AGENTA,'A','F','P') RODZAJ, DECODE(p.TYP_AGENTA,'P','R',p.TYP_AGENTA) TYP_PRZY,NULL TYP_UBEZ,p.nazwisko, p.imie_pierwsze, p.imie_ojca, p.nazwa_firmy, p.nazwa_firmy_skr
INTO c_numer, c_rodzaj, c_typ_przy, c_typ_ubez, c_nazwisko, c_imie, c_imie_ojca, c_nazwa_firmy, c_nazwa_firmy_skr
FROM T_AG_KANDYDACI a, T_AG_UMOWY_TAB p, T_ZDARZENIA z
WHERE a.ID_AGKAN = p.TECH_PODM_ID_PODM
AND z.PODM_ID_PODM = a.ID_AGKAN
AND z.PODM_UMOW_ID_UMOW IS NULL
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT k.NUMER_UMOWY NUMER, DECODE(k.TYP_PRZYSTAPIENIA,'P','F','P') RODZAJ,k.TYP_PRZYSTAPIENIA TYP_PRZY,'NPO' TYP_UBEZ, k.nazwisko, k.imie_pierwsze, k.imie_ojca, k.nazwa_firmy nazwa_firmy, k.nazwa_firmy_skr nazwa_firmy_skr
INTO c_numer, c_rodzaj, c_typ_przy, c_typ_ubez, c_nazwisko, c_imie, c_imie_ojca, c_nazwa_firmy, c_nazwa_firmy_skr
FROM T_WE_UM_NPO_TAB k, T_ZDARZENIA z
WHERE z.ID_ZDAR = k.TECH_ZDAR_ID_ZDAR
AND k.TYP_PRZYSTAPIENIA IN ('P','W')
AND z.PODM_ID_PODM IS NULL
AND z.PODM_UMOW_ID_UMOW IS NULL
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT k.NUMER_UMOWY NUMER, 'F' RODZAJ,'-' TYP_PRZY,'OPS' TYP_UBEZ, k.nazwisko, k.imie_pierwsze, k.imie_ojca, NULL nazwa_firmy, NULL nazwa_firmy_skr
INTO c_numer, c_rodzaj, c_typ_przy, c_typ_ubez, c_nazwisko, c_imie, c_imie_ojca, c_nazwa_firmy, c_nazwa_firmy_skr
FROM T_WE_UM_OPS_TAB k,T_ZDARZENIA z
WHERE z.ID_ZDAR = k.TECH_ZDAR_ID_ZDAR
AND z.PODM_ID_PODM IS NULL
AND z.PODM_UMOW_ID_UMOW IS NULL
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT NULL NUMER, NULL RODZAJ,NULL TYP_PRZY,NULL TYP_UBEZ, NULL nazwisko, NULL imie_pierwsze, NULL imie_ojca, NULL nazwa_firmy, NULL nazwa_firmy_skr
INTO c_numer, c_rodzaj, c_typ_przy, c_typ_ubez, c_nazwisko, c_imie, c_imie_ojca, c_nazwa_firmy, c_nazwa_firmy_skr
FROM T_ZDARZENIA z
WHERE z.TYP NOT IN ('UM_OPS','UM_NPO','NPO_OP','UZUP_U')
AND z.PODM_ID_PODM IS NULL
AND z.PODM_UMOW_ID_UMOW IS NULL
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
--dbms_output.put_line('id zdar wykonania '||WE_ID_ZDAR||' ostatni wyjatek');
NULL;
END;
END;
END;
END;
END;
END;
END;
END;
END;
END;
--raise c;
IF WE_KOLUMNA = 'NUMER' THEN
RETURN c_numer;
ELSIF WE_KOLUMNA = 'RODZAJ' THEN
RETURN c_rodzaj;
ELSIF WE_KOLUMNA = 'TYP_PRZY' THEN
RETURN c_typ_przy;
ELSIF WE_KOLUMNA = 'TYP_UBEZ' THEN
RETURN c_typ_ubez;
ELSIF WE_KOLUMNA = 'NAZWISKO' THEN
RETURN c_nazwisko;
ELSIF WE_KOLUMNA = 'IMIE' THEN
RETURN c_imie;
ELSIF WE_KOLUMNA = 'IMIE_OJCA' THEN
RETURN c_imie_ojca;
ELSIF WE_KOLUMNA = 'NAZWA_FIRMY' THEN
RETURN c_nazwa_firmy;
ELSIF WE_KOLUMNA = 'NAZWA_FIRMY_SKR' THEN
RETURN c_nazwa_firmy_skr;
ELSIF WE_KOLUMNA = 'JEST' THEN
RETURN c_jest;
END IF;
END;
CREATE OR REPLACE FUNCTION F_Rej_Zdar_Date
(WE_ID_ZDAR IN NUMBER
,WE_KOLUMNA IN VARCHAR2
RETURN DATE
IS
d_data DATE;
BEGIN
BEGIN
SELECT p.DATA_PODPISANIA
INTO d_data
FROM T_KLIENCI k, T_PRZYSTAPIENIA p, T_ZDARZENIA z, T_PODMIOTY D1, T_PODMIOTY D2
WHERE p.KLIE_ID_KLIE = k.ID_KLIE
AND z.PODM_ID_PODM = D1.ID_PODM
AND D1.KLIE_ID_KLIE = p.KLIE_ID_KLIE
AND Z.PODM_UMOW_ID_UMOW = D2.ID_PODM
AND D2.PRZY_ID_PRZY = P.ID_PRZY
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT p.DATA_PODPISANIA
INTO d_data
FROM T_KLIENCI k, T_PRZYSTAPIENIA p, T_ZDARZENIA z, T_PODMIOTY D
WHERE z.PODM_UMOW_ID_UMOW IS NULL
AND z.PODM_ID_PODM = D.ID_PODM
AND D.KLIE_ID_KLIE = k.ID_KLIE
AND p.KLIE_ID_KLIE = k.ID_KLIE
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT NULL DATA_PODPISANIA
INTO d_data
FROM T_ZDARZENIA z, T_INSTYTUCJE I
WHERE Z.TYP IN ('WFS526','WFS542','WFS553','WFS609','WFS611','WYP_KS','WYP_PO','WYP_SB','DI_ZAT')
AND z.PODM_UMOW_ID_UMOW IS NULL
AND Z.PODM_ID_PODM = I.ID_INST
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT p.DATA_PODPISANIA DATA_PODPISANIA
INTO d_data
FROM T_AG_AGENCI a, T_AG_UMOWY p, T_ZDARZENIA z
WHERE a.ID_AGAG = p.AGAG_ID_AGAG
AND z.PODM_UMOW_ID_UMOW = p.ID_AGUM
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT p.DATA_PODPISANIA DATA_PODPISANIA
INTO d_data
FROM T_AG_AGENCI a, T_AG_UMOWY p, T_ZDARZENIA z
WHERE a.ID_AGAG = p.AGAG_ID_AGAG
AND z.PODM_ID_PODM = a.ID_AGAG
AND z.PODM_UMOW_ID_UMOW IS NULL
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT p.DATA_PODPISU_AGENTA DATA_PODPISANIA
INTO d_data
FROM T_AG_KANDYDACI a, T_AG_UMOWY_TAB p, T_ZDARZENIA z
WHERE a.ID_AGKAN = p.TECH_PODM_ID_PODM
AND z.PODM_UMOW_ID_UMOW = p.TECH_ID_AGUMT
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT p.DATA_PODPISU_AGENTA DATA_PODPISANIA
INTO d_data
FROM T_AG_KANDYDACI a, T_AG_UMOWY_TAB p, T_ZDARZENIA z
WHERE a.ID_AGKAN = p.TECH_PODM_ID_PODM
AND z.PODM_ID_PODM = a.ID_AGKAN
AND z.PODM_UMOW_ID_UMOW IS NULL
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT k.DATA_PODPISANIA_UM DATA_PODPISANIA
INTO d_data
FROM T_WE_UM_NPO_TAB k, T_ZDARZENIA z
WHERE z.ID_ZDAR = k.TECH_ZDAR_ID_ZDAR
AND k.TYP_PRZYSTAPIENIA IN ('P','W')
AND z.PODM_ID_PODM IS NULL
AND z.PODM_UMOW_ID_UMOW IS NULL
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT k.DATA_PODPISANIA_UM DATA_PODPISANIA
INTO d_data
FROM T_WE_UM_OPS_TAB k,T_ZDARZENIA z
WHERE z.ID_ZDAR = k.TECH_ZDAR_ID_ZDAR
AND z.PODM_ID_PODM IS NULL
AND z.PODM_UMOW_ID_UMOW IS NULL
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
BEGIN
SELECT NULL DATA_PODPISANIA
INTO d_data
FROM T_ZDARZENIA z
WHERE z.TYP NOT IN ('UM_OPS','UM_NPO','NPO_OP','UZUP_U')
AND z.PODM_ID_PODM IS NULL
AND z.PODM_UMOW_ID_UMOW IS NULL
AND z.ID_ZDAR = WE_ID_ZDAR;
EXCEPTION
WHEN NO_DATA_FOUND THEN
d_data := NULL;
END;
END;
END;
END;
END;
END;
END;
END;
END;
END;
IF WE_KOLUMNA = 'DATA_PODPISANIA' THEN
RETURN d_data;
END IF;
END; -
Select List (query based LOV) in a wizard created report form
I have created an updatable report form with 3 columns:
app_id
user_id
group_id
Each app_id has multiple group_id's associated with it, and I want to show the group_id field as a Select List (query based LOV) that contains the groups associated with the app_id.
My query for the select list needs to be similar to the following:
SELECT DISPLAY_NAME, GROUP_ID
FROM APPLICATION_GROUPS
WHERE APP_ID = ?????
ORDER BY 1
The problem is, I don't know how to reference the app_id from the main report to replace the ?????.
In other words, if my report returns 2 rows of data like this:
app_id----------user_id----------group_id
1-----------------24------------------3
2-----------------24------------------15
Then how do I get the group_id column to be a select list of possible groups for each application? If app_id 1 has 3 groups associated with it, 3, 4, & 5 and app_id 2 has 2 groups associated with it, 15 & 16, then those each of the select lists should be based on the app_id.
Hopefully I explained this clearly.
Thanks,
KrisLeo,
Thanks for the response, but I don't think you quite understand my problem. If I go to the Column Attributes screen for the group_id field, I have the "Display As" drop down set to "Select List (query based LOV)", not "Select List (named LOV)". This requires that the sql query be written in the "List of values definition" text area below. Within that text area I have the following query:
SELECT DISPLAY_NAME, GROUP_ID
FROM APPLICATION_GROUPS
WHERE APP_ID = ?????
ORDER BY 1
The APP_ID that I need to reference is for the current row of data that is being processed. Therefore, I can't use a :PNNN_APP_ID variable, because that field does not exist on the page.
Hopefully this explains it a little better.
Thanks,
Kris
Maybe you are looking for
-
Error while uploading a file using ke13 transactoin
Hi.. We have the following error when uploading a project plan by cost element excel upload using KE13 transaction... There is a z program that calls this ke13 program while uploading. The excel file is split into x files and uploaded.. THe error is:
-
Hello to all, I'm not a newbie on Forms development, but... I don't remember how to do the following! : - I have a form (.fmb and .fmx in d:\app\) with only one datablock and 2 text items and two buttons inside that datablock. I want to display an im
-
How to change the character set of the D/b
Hello All, When i issue the command ALTER DATABASE CHARACTER SET UTF8 It gives me the error that I can only change the character set to a superset of the existing character set. Is there any way i can change the character set without recreating the d
-
Hello. If anyone can help with this that would be great. I can't get the pop up Wimpy Player to load. The player itself works fine, I already tested it. I will liste the code for the HTML AND THE .swf files: Web Page: http://www.sanddust.com .html <s
-
VIP email alert only works.......
I have an iPhone 5 with iOS 8.1 I have set up the alerts in VIP but only get notifications when I check mail, Sending the email through other device. But if I send an email through my phone itself and lock the phone the banner and ring tone I selecte