Select data from table depending on date range

i have first table with following data, This is calender for a year
I have 2nd table , user created period from 1st table
I want to select acctstartdate from 1st tale which are not within 2nd table period.
I want to select acctstartdate as jan to aug only. I dont want to select acctstartdate for sept and oct-dec.
Same with acctenddate. I want to select Jan-aug only
How to do this ??
h2007

Do you mean this?
SELECT *
FROM Table1 t1
WHERE NOT EXISTS (SELECT 1
FROM Table2
WHERE ACCTYRID = t1.ACCTYRID
AND ACCTYR = t1.ACCTYR
AND (t1.ACCTSTARTDATE BETWEEN ACCTSTARTDATE AND ACCTENDDATE
OR t1.ACCTENDDATE BETWEEN ACCTSTARTDATE AND ACCTENDDATE
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Similar Messages

Devloped an ALV report for daily cash receipts for selected date range

hi,
             how to devlop an ALV report for daily cash receipts for selected date range.for this report what are the tables and fields we have to use.what is the selectionscreen&what is logic.give me sample report.

Hi,
You can develop simple reports using Report Painter.
You may be also interested in:
Check report SAPMF05A for credit memo
See the following Std reports on Payment Advices execute the Tcodes:
S_ALR_87009888
S_ALR_87009889
S_ALR_87009890
S_ALR_87009891
S_ALR_87009892
S_ALR_87009893
S_ALR_87009978
S_ALR_87009979
S_ALR_87009980
S_ALR_87009981
S_ALR_87009982
S_ALR_87009983
S_ALR_87010056
S_ALR_87010057
S_ALR_87010058
S_ALR_87010059
S_ALR_87010060
S_ALR_87010061
S_ALR_87010066
S_ALR_87010067
S_ALR_87012106
S_ALR_87012107
S_ALR_87012108
S_ALR_87012109
S_ALR_87012110
S_ALR_87012111
S_ALR_87012116
S_ALR_87012117
S_ALR_87012200
S_ALR_87012201
S_ALR_87012202
S_ALR_870122
S_ALR_87012204
S_ALR_87012205
S_ALR_87012350
S_ALR_87012351
S_ALR_87012352
S_ALR_87012353
S_ALR_87012354
S_ALR_87012355
sample ALV report:
tables:
marav. "Table MARA and table MAKT
Data to be displayed in ALV
Using the following syntax, REUSE_ALV_FIELDCATALOG_MERGE can auto-
matically determine the fieldstructure from this source program
Data:
begin of imat occurs 100,
matnr like marav-matnr, "Material number
maktx like marav-maktx, "Material short text
matkl like marav-matkl, "Material group (so you can test to make
                        " intermediate sums)
ntgew like marav-ntgew, "Net weight, numeric field (so you can test to
                        "make sums)
gewei like marav-gewei, "weight unit (just to be complete)
end of imat.
Other data needed
field to store report name
data i_repid like sy-repid.
field to check table length
data i_lines like sy-tabix.
Data for ALV display
TYPE-POOLS: SLIS.
data int_fcat type SLIS_T_FIELDCAT_ALV.
select-options:
s_matnr for marav-matnr matchcode object MAT1.
start-of-selection.
read data into table imat
select * from marav
into corresponding fields of table imat
where
matnr in s_matnr.
end-of-selection.
Now, we start with ALV
To use ALV, we need a DDIC-structure or a thing called Fieldcatalogue.
The fieldcatalouge can be generated by FUNCTION
'REUSE_ALV_FIELDCATALOG_MERGE' from an internal table from any
report source, including this report.
The only problem one might have is that the report and table names
need to be in capital letters. (I had it )
Store report name
i_repid = sy-repid.
Create Fieldcatalogue from internal table
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
       EXPORTING
            I_PROGRAM_NAME         = sy-repid
            I_INTERNAL_TABNAME     = 'IMAT' "capital letters!
            I_INCLNAME             = sy-repid
       CHANGING
            CT_FIELDCAT            = int_fcat
       EXCEPTIONS
            INCONSISTENT_INTERFACE = 1
            PROGRAM_ERROR          = 2
            OTHERS                 = 3.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
            I_CALLBACK_PROGRAM       = i_repid
            I_STRUCTURE_NAME         = 'marav'
            I_DEFAULT                = 'X'
            I_SAVE                   = 'A'
       TABLES
            T_OUTTAB                 = imat.
IF SY-SUBRC <> 0.
    WRITE: 'SY-SUBRC: ', SY-SUBRC .
ENDIF.
Hope this will help.
Regards,
Naveen.

File Count with selected date range

Hi,
Our requirement is to get the file count with selected date by the user from two sharepoint date time controls i.e. dtp1 and dtp2 into the data table. I am able to get the file count of specific folder from Pages library through below code. Now need to get
the selected date range from two date time picker controls and check with the item created by is within the date range. If yes I need to get the file count.
So please share your ideas/thoughts to do the same.
SPList list =
wikiweb.Lists["Pages"];
                    SPFolderCollection oFolders
= list.RootFolder.SubFolders["foldername"].SubFolders;
                    DataTable dt
= new DataTable();
                    dt.Columns.Add("Column1");
                    DataRow dr;
                    if (oFolders.Count
> 0)
                        foreach (SPFolder oFolder in oFolders)
if (!oFolder.Name.Equals("Forms"))
                                dr
= dt.NewRow();
dr["Column1"] = oFolder.ItemCount.ToString();
dt.Rows.Add(dr);
Regards,
Sudheer
Thanks & Regards, Sudheer

Hi,
I have modified the code as below
if((DateTime)(oFolder.Item.File.TimeCreated>dtFromDate.SelectedDate)&&(DateTime)(oFolder.Item.File.TimeCreated<dtToDate.SelectedDate))
But still it is throwing the error.
Please share your ideas on the same.
Regards,
Sudheer
Thanks & Regards, Sudheer

Devolped an ALV report for daily cash receipts for selected date range

hi,
             how to devlop an ALV report for daily cash receipts for selected date range.for this report what are the tables and fields we have to use.what is the selectionscreen&what is logic.give me sample report.

hi,
             how to devlop an ALV report for daily cash receipts for selected date range.for this report what are the tables and fields we have to use.what is the selectionscreen&what is logic.give me sample report.

Error when selecting date range in query designer

hi all,
when iam trying to select date range in query designer like 01.04.2009 to 10.04.2009 it has to select only that dates where as it is selecting all the dates in between those like 010.04.2009,01.03.2009,01.02.2009.why this is happening ,iam unable to understand.plzz help me in this issue.
Vamshi D Krishna

hi ,
i have created a variable as you told but no use.still i have to select the dates manuallyone after the other.for more user friendly can i have a calander where i can select date ranges.is it posible to have calander for selecting date ranges instead selecting dates one by one,if posible i request you to give the detailed steps.plzz guide me in this issue.thanks in advance.
Vamshi D Krishna

Resource Assignment Select date range not wokring

The Select Date Range control is not working properly it does not change the results shown in resource assignments under resource center in Project server 2013. Any ideas? Have I missed some configuration?
Regards, Syed Faizan ur Rehman, CBPM®,PRINCE2®, MCTS

Hi Syed,
It does work correctly for me in my Project Online instance. Have you installed the SP1?
Note that the date range is only available for the timephased data and not for the Gantt chart.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Select count(*) from table in oracle 11g with direct path read takes time

select count(*) from table takes long time, even more than couple of hours..
direct path read is the wait event which is almost is at 99%..
can u someone provide some info on this.. on solution.. thankx

knowledgespring wrote:
table has millions of records... 130 millions..
select count(*) from BIG_SIZE_TABLE; --- executed in sql plus command prompt.
Rows     Execution Plan
0 SELECT STATEMENT   MODE: ALL_ROWS
0   SORT (AGGREGATE)
0    TABLE ACCESS   MODE: ANALYZED (FULL) OF 'BIG_SIZE_TABLE' (TABLE)
Elapsed times include waiting on following events:
Event waited on                             Times   Max. Wait Total Waited
----------------------------------------   Waited ---------- ------------
SQL*Net message to client                       1        0.00          0.00
enq: KO - fast object checkpoint                1        0.01          0.01
Disk file operations I/O                       18        0.00          0.00
direct path read                            58921        0.34        418.54direct path read time waited is : 58921 total time waited: 418.54
That 418 seconds - not the hours you reported earlier. Is it possible that your connection to the database broke ?
On a typical system, by the way, you can usually turn one direct read for tablescan into 1MB, so your scan seems to have covered about 59 GB, which seems to be in the right sort of ballpark for 130M rows.
we have another query and when we test the query execution using v$sql, is_bind_sensitive =N, how to make is_bind_sensitive=Y all the time.. There is a hint /*+ bind_aware */ - I'd have to check whether or not it's documented at present. It might help.
I would be interested in hearing why you think the hint should be bind sensitive when the optimizer doesn't.
Regards
Jonathan Lewis

How do I execute "Select count(*) from table " in OCI

Hi,
I am new to OCI and so this question may seem stupid. I would like to know how to execute the query "select count(*) from <table>" using OCI V8 functionality? Also after how do I get the result into a integer datatype? I have gone through most of the demo programs but is is of little help to me.
Thanks in advance...
Regards,
Shubhayan.

Hi,
Here is sample code to give you some idea how to do it. If you want some more info let me know.
Pankaj
ub4 count;
// Prepare the statement.
char szQry = "SELECT count() FROM T1";
if(OCI_ERROR == OCIStmtPrepare(pStmthp, pErrhp, (unsigned char*)szQry, strlen(szQry), OCI_NTV_SYNTAX , OCI_DEFAULT) )
     cout << "Error in OCIStmtPrepare" << endl;
     exit(1);
// Bind the output parameter.
OCIDefine *pDefnpp;
if(OCI_ERROR == OCIDefineByPos ( pStmthp, &pDefnpp, pErrhp, 1,
&count, sizeof(ub4), SQLT_INT,
(dvoid *) 0, (ub2 *) 0, (ub2 *) 0,
                    OCI_DEFAULT) )
     cout << "Error in OCIDefineByPos" << endl;
     exit(1);
if(OCI_ERROR == OCIStmtExecute(pSvchp, pStmthp, pErrhp, 1, 0, NULL, NULL, OCI_DEFAULT) )
     cout << "Error in OCIStmtExecute" << endl;
     exit(1);

Select values from table%ROWTYPE variable into a cursor

I have a stored procedure which has an OUT parameter of table1%ROWTYPE.
In future we might have to add more OUT parameters of table2%ROWTYPE etc. But at any point of time only one will have values.
So instead of having table%ROWTYPE as OUT parameter, can I send these single row ( with variable values) in a cursor, so that declaration part atleast will not change.
Is it possible to select values from table%ROWTYPE variable into a cursor.
cursorOUT IS
SELECT * FROM varREC;
where varREC is table.ROWTYPE variable.
Or which is the better solution in this situation.
Thanks.

SQL> var a refcursor
SQL> declare
2   bb emp%ROWTYPE;
3 begin
4   select * into bb from emp where rownum = 1;
5   open :a for select bb.ename ename, bb.empno empno from dual;
6 end;
7 /
PL/SQL procedure successfully completed.
SQL> print a
ENAME                                 EMPNO
SMITH                                  7369Rgds.

Select aentries from table Z-Table for all sales order line items

Hi friends,
can anyone please explain me about the "Select entries from table Z-Table for all sales order line items".
Thanks.

Moderator message - Welcome to SCN.
But
Moderator message - Please search before asking. Press F1 on SELECT and look at the FOR ALL ENTRIES addition. - post locked
Rob

Creating report based on user selected Date Range

Hello.
I am trying to display an Apex report that selects data for the report based on a user entered date range.
It's a simple page with two date picker fields (p18_start and p18_end).
The report region SQL looks like this:
SELECT *
FROM prj_items
WHERE LM_DT BETWEEN :p18_start AND :P18_end
One table, one field on the table to search and two Apex variables.
I thought this would be fairly simple, but I am obviously missing something.
I not even sure what other information is needed to help me figure this out.
-Jody

Hi,
You can set defaults for the datepickers if you need to - this could be done in a computation on the page for each item and conditional on the item being null.
When I've done something similar to this, I've created two hidden page items - eg, :P19_FIRST_DATE and :P19_LAST_DATE and populated these with the earliest/latest date that the user could reasonably select (perhaps, in your case, the MIN(LM_DT) and MAX(LM_DT) values).
Then your SQL would be:
select * from PRJ_ITEMS
where LM_DT BETWEEN TO_DATE(NVL(:P19_START,:P19_FIRST_DATE), 'DD-MON-YY')
AND TO_DATE(NVL(:P19_END,:P19_LAST_DATE), 'DD-MON-YY')If you don't want to set default dates, you could do something like:
SELECT * FROM PRJ_ITEMS
WHERE (:P19_START IS NULL AND :P19_END IS NULL)
OR (:P19_START IS NOT NULL AND :P19_END IS NULL AND LM_DT >= TO_DATE(:P19_START,'DD-MON-YY'))
OR (:P19_START IS NULL AND :P19_END IS NOT NULL AND LM_DT <= TO_DATE(:P19_END,'DD-MON-YY'))
OR (LM_DT BETWEEN TO_DATE(:P19_START,'DD-MON-YY') AND TO_DATE(:P19_END,'DD-MON-YY'))There are various reasons why your two dates are being cleared when the page is reloaded. Firstly, you should check the branch that returns to the same page - make sure you are not clearing the cache for the page. Then, have a look to see if there is a "reset page" process (usually created for you when you create a form page). Then, check the Source settings for the items. Typically, these would be "Only when current value in session state is null" and a Source Type of "Static Assignment" with the "Source Value or Expression" left empty.
Andy

Using function(s) to select date range in a computation.

Hello
Within my ApEx report, I would like to be able to have data returned from within a date range selected by the user. Under "Compute" there are lots of "Functions" (Least, Greatest, Last_Day, etc.) but so far I have not been able to find the right syntax for date range.
This seems so simple - any help appreciated.
Thanks
Paul S.

I do not use APEX but is the BETWEEN operator available to you?
Normally to select a date range you just write code like
select ....
from table_t
where date_col between to_date(start_date,'format') and to_date(end_date,'format')
or
where date_col >= to_date(start_date,'format')
and date_col < to_date(end_date,'format') + 1
as this form eliminates worrying about the time component.
HTH -- Mark D Powell --

How to fetch assets from tables depending on periods submitted in query ?

Hello,
Module : Fixed Assets
We are trying to fetch the assets for a report depending on the periods['From Period' & 'To Period'] given to SQL query,but we are not getting count of assets as expected.
And so the count isn't matching with 'CIP Details Report' which is a seeded oracle report.Here is the query that we tried,
SELECT   fadd.asset_id, fadd.asset_number,
         fak.segment1 || '.' || fak.segment2 asset_key, fadd.tag_number,
         fadd.description asset_description,
         fadd.attribute_category_code asset_category,
         fb.date_placed_in_service, gp.start_date, gp.end_date
    FROM fa_additions fadd,
         fa_asset_keywords fak,
         fa_books_v fb,
         gl_periods gp,
         fa_deprn_periods fdp,
         fa_asset_history fah,
         fa_transaction_headers fth
   WHERE fadd.asset_key_ccid = fak.code_combination_id
     AND fadd.asset_id = fb.asset_id
     AND fah.asset_id = fadd.asset_id
     AND fth.asset_id = fah.asset_id
     AND fth.transaction_header_id = fah.transaction_header_id_in
     AND fah.asset_type = 'CIP'
     AND fdp.book_type_code = fb.book_type_code
     AND fdp.period_name = gp.period_name
     AND fdp.book_type_code = :p_book_type_code            --'KV US CORP BOOK'
     AND fdp.period_counter =
            (SELECT MAX (fdp.period_counter)
               FROM fa_deprn_periods fdp
              WHERE 1 = 1
                AND fdp.calendar_period_open_date BETWEEN (SELECT start_date
                                                             FROM gl_periods
                                                            WHERE period_name =
                                                                    :p_period_from) = -- 'JUL-12-F13'
                                                      AND (SELECT start_date
                                                             FROM gl_periods
                                                            WHERE period_name =
                                                                    :p_period_to)) -- 'DEC-12-F13'
     AND fth.transaction_date_entered
            BETWEEN (SELECT calendar_period_open_date
                       FROM fa_deprn_periods                      --gl_periods
                      WHERE period_name = :p_period_from           -- 'JUL-12-F13'
                        AND book_type_code = :p_book_type_code)   --'KV US CORP BOOK'
                AND (SELECT calendar_period_close_date
                       FROM fa_deprn_periods                      --gl_periods
                      WHERE period_name = :p_period_to            -- 'DEC-12-F13'
                        AND book_type_code = :p_book_type_code)
GROUP BY fadd.asset_id,
         fadd.asset_number,
         fak.segment1 || '.' || fak.segment2,
         fadd.tag_number,
         fadd.description,
         fadd.attribute_category_code,
         fb.date_placed_in_service,
         fb.deprn_method_code,
         fb.life_in_months,
         gp.start_date,
         gp.end_date
ORDER BY 1
The query returns the assets which have the 'transaction date entered' between the periods submitted.
But what about the assets who's 'Beginning Year Balance' is not zero [in the periods submitted in the query], those assets should also get displayed in the report.[and seeded report 'CIP Detail Report' shows assets who's 'Beginning Year Balance' is not zero along with the assets which have the transaction date entered between the periods submitted]
Any inputs / help / suggestions on this ?
Thanks !

Hi vijaya,
no simple select statement solution so far.
As BSEG is a huge table you should try to get the full key values into another internal table first.
SAP avoids direct selections from BSEG.
Pleas consider the use of one of the secondary index tables first:
      BSAD : Accounting: Secondary Index for Customers (Cleared Items)
      BSAK : Accounting: Secondary Index for Vendors (Cleared Items)
      BSAS : Accounting: Secondary Index for G/L Accounts (Cleared Item
      BSEC : One-Time Account Data Document Segment
      BSEG : Accounting Document Segment
      BSID : Accounting: Secondary Index for Customers
      BSIK : Accounting: Secondary Index for Vendors
      BSIS : Accounting: Secondary Index for G/L Accounts
you may include
      BKPF : Accounting Document Header
for restrictions about time and document type.
The last step is a FOR ALL ENTRIES selection from BSEG providing the full key values.
Although you may have even more selects, the overall performance will be much better.
Regards,
Clemens

Update a select-option From Table

Hi,
I'm originally a C++ developer trying to learn ABAP.
I want to append values to a select-option from a table if another select-option is specified. I wrote some code that I believe will work but looks very inefficient to me. Any advice on how to streamline this process would appreciated.
The following is pseudo code and I left out some tweaks for simplicity and understanding but the basic idea is there. I want to add selection criteria to a select-option based upon a second select option (that may or may not be provided) table lookup.
Example:
DATA: groups TYPE table3.
SELECT-OPTIONS:
     s_accountNo FOR table1-accountNo,
     s_accountGroupNo FOR table2-accountGroupNo.
**** get the Account Groups that meet the selection criteria.
START-OF-SELECTION
     SELECT * INTO TABLE groups
          FROM table3
          WHERE accountGroupNo IN s_accountGroupNo.
**** Remove duplicate accounts from the Account Groups
SORT groups BY accountNo.
DELETE ADJACENT DUPLICATES FROM groups COMPARING accountNo.
**** Append the account #'s onto the s_accountNo range/select-option
LOOP AT groups.
     APPEND groups-accountNo TO s_accountNo.
ENDLOOP.
**** manually edit the s_accountNo to have the correct option/sign for use in further select statements.
LOOP AT s_accountNo.
     s_accountNo-sign = 'I'.
     s_accountNo-option = 'EQ'.
     MODIFY s_accountNo.
ENDLOOP.
Thanks much,
-Chris

The actual selection is fairly complicated from my point of view. I wrote the accountNo example to make things less confusing for me as much as anyone else, not to hide anything. I also didn't expect this amount of feedback, though it is appreciated.
The eventual select statement that is done is the following:
SELECT DISTINCT vttp~zseq_num
                  likp~vbeln
                  likp~lprio
                  likp~vstel
                  lips~werks
                  likp~lgnum
                  lips~posnr
                  lips~lgort
                  lips~vgbel
                  lips~vgpos
                  lips~sobkz
                  lips~lfimg
                  lips~vrkme
                  lips~matnr
                  lips~volum
                  mara~raube
                  vttk~dplbg
                  vttp~tknum
                  vttp~tpnum
                  likp~berot
                  likp~vkorg
                  likp~lfart
                  INTO TABLE temp_deliveries
FROM vttk
       INNER JOIN vttp
       ON vttk~tknum = vttp~tknum
       INNER JOIN likpuk AS likp
       ON vttp~vbeln = likp~vbeln
       INNER JOIN lipsup AS lips
       ON likp~vbeln = lips~vbeln
       INNER JOIN mara
       ON lips~matnr = mara~matnr
WHERE likp~vstel = p_vstel
    AND lips~werks = p_werks
    AND likp~lgnum IN s_lgnum
    AND likp~vbeln IN s_vbeln
    AND lips~vgbel IN s_vgbel
    AND vttk~dplbg IN s_dplbg
    AND vttk~tknum IN s_tknum
    AND mara~raube = p_raube
    AND likp~lfart IN ('ZLF', 'NL')
    AND lips~kosta <> 'C'
    AND lips~kosta <> ''
    AND likp~kostk <> 'C'
    AND likp~vbtyp = outbound.
and the structure it is put into is the following:
TYPES: BEGIN OF type_deliveries,
          zseq_num    TYPE vttp-zseq_num,
          vbeln       TYPE likp-vbeln,
          lprio       TYPE likp-lprio,
          vstel       TYPE likp-vstel,
          werks       TYPE likp-werks,
          lgnum       TYPE likp-lgnum,
          posnr       TYPE lips-posnr,
          lgort       TYPE lips-lgort,
          vgbel       TYPE lips-vgbel,
          vgpos       TYPE lips-vgpos,
          sobkz       TYPE lips-sobkz,
          lfimg       TYPE lips-lfimg,
          vrkme       TYPE lips-vrkme,
          matnr       TYPE lips-matnr,
          volum       TYPE lips-volum,
          raube       TYPE mara-raube,
          dplbg       TYPE vttk-dplbg,
          tknum       TYPE vttk-tknum,
          tpnum       TYPE vttp-tpnum,
          berot       TYPE likp-berot,
          vkorg       TYPE likp-vkorg,
          lfart       TYPE likp-lfart,
          sdabw       type likp-sdabw,
          orig_lgort TYPE lips-zzorig_lgort,
          selected    TYPE flag,
          counter(15) TYPE n,
        END OF type_deliveries.
Currently there is a select option for tknum and I am attempting (successfully with my change shown above, though as many have pointed out I may be misusing the intended functionality) to add another select-option for s_pickno which is a field of a custom table that has pickno as one of it's unique keys and tknum as another of it's fields. The idea is to be able to take a pickno and use it to find all the tknum's associated and then use them in the select statement above as well as any tknum's provided as initial input by the user. If there is a better method than modifying the s_tknum selection I'm open to feedback.
Apologies that my initial example did not portray this, but being new I was a little overwhelmed myself and want something I can wrap my head around better. There's my wall of text

How to get selected row from table(FacesCtrlHierBinding ).

I'am trying to get selected row data from table:
FacesCtrlHierBinding rowBinding = (FacesCtrlHierBinding) tab.getSelectedRow();
Row rw = rowBinding.getRow();
But import for oracle.adfinternal.view.faces.model.binding.FacesCtrlHierBinding cannot be found from my JDev 11.
What is correct package for FacesCtrlHierBinding?

Hi, another problem.
I fill table with data manualy from source:
<af:table var="row" value="#{getCompanyData.com}"
rowSelection="single" columnSelection="single"
editingMode="clickToEdit"
binding="#{getCompanyData.tab}"
selectionListener="#{getCompanyData.GetSelectedCompany}">
<af:column sortable="false" headerText="col1">
<af:outputText value="#{row.id}"/>
</af:column>
<af:column sortable="false" headerText="col2">
<af:outputText value="#{row.name}"/>
</af:column>
<af:column sortable="false" headerText="col3">
<af:outputText value="#{row.phone}"/>
</af:column>
</af:table>
and when I'am trying to use method to get selected row:
RichTable table = this.getTab(); //get table bound to UI Table
RowKeySet rowKeys = table.getSelectedRowKeys();
Iterator selection = table.getSelectedRowKeys().iterator();
while (selection.hasNext())
Object key = selection.next();
table.setRowKey(key);
Object selCompany = table.getRowData();
JUCtrlHierNodeBinding rowData = (JUCtrlHierNodeBinding) selCompany;
row = rowData.getRow();
I got an error:
SEVERE: Server Exception during PPR, #1
javax.el.ELException: java.lang.ClassCastException: data.COMPANY cannot be cast to oracle.jbo.uicli.binding.JUCtrlHierNodeBinding
When I created tables by dragging data from date control, all worked fine.
What could be a problem?

Select data from table depending on date range

Similar Messages

Maybe you are looking for