Select * from which tables for login attempts?

When I set >
Home>Administration>Monitor Activity>Login Attempts
I m looking at all guest and IP adress. Which tables
give me this select?
thanks in advance

Hi,
You can load the supplied internal apex applications into your own instance, in this case f4350.sql. You can then look at how things are put together.
Doing this for page 70, the report you asked for, gives you this sql:
select
upper(login_name) login_name,
application,
owner,
decode(authentication_method,'FND_ACCOUNT',v('PRODUCT_NAME'),
'CUSTOM',wwv_flow_lang.system_message('CUSTOM_AUTH_SCHEME_DESC'),
'$SITE_INTERNAL$',wwv_flow_lang.system_message('SERVICE_LOGIN'),
'$WORKSPACE_INTERNAL$',wwv_flow_lang.system_message('WORKSPACE_LOGIN'),
'DB ACCOUNT',wwv_flow_lang.system_message('DBACCOUNT_AUTH_SCHEME_DESC'),
'LDAP',wwv_flow_lang.system_message('LDAP_AUTH_SCHEME_DESC'),
authentication_method) authentication_method,
access_date,
access_date access_date2,
ip_address,
remote_user,
decode(nvl(authentication_result,0),
0,m.AUTH_SUCCESS,
1,m.AUTH_UNKNOWN_USER,
2,m.AUTH_ACCOUNT_LOCKED,
3,m.AUTH_ACCOUNT_EXPIRED,
4,m.AUTH_PASSWORD_INCORRECT,
5,m.AUTH_PASSWORD_FIRST_USE,
6,m.AUTH_ATTEMPTS_EXCEEDED,
7,m.AUTH_INTERNAL_ERROR,
authentication_result) authentication_result,
custom_status_text
from wwv_flow_user_access_log_v l,
(select
wwv_flow_lang.system_message('AUTH_SUCCESS') auth_success,
wwv_flow_lang.system_message('AUTH_UNKNOWN_USER') auth_unknown_user,
wwv_flow_lang.system_message('AUTH_ACCOUNT_LOCKED') auth_account_locked,
wwv_flow_lang.system_message('AUTH_ACCOUNT_EXPIRED') auth_account_expired,
wwv_flow_lang.system_message('AUTH_PASSWORD_INCORRECT') auth_password_incorrect,
wwv_flow_lang.system_message('AUTH_PASSWORD_FIRST_USE') auth_password_first_use,
wwv_flow_lang.system_message('AUTH_ATTEMPTS_EXCEEDED') auth_attempts_exceeded,
wwv_flow_lang.system_message('AUTH_INTERNAL_ERROR') auth_internal_error
from dual) m
where security_group_id = :flow_security_group_id
and access_date >= sysdate - nvl(:p70_time,1)
and ( :P70_APPLICATION is null or application like '%'||:P70_APPLICATION||'%')
and (:P70_USER is null or lower(login_name) like '%'||lower(:P70_USER)||'%')
and (nvl(:P70_RESULT,99) = 99 or nvl(authentication_result,0) = :P70_RESULT)
Hope that helps,
Adam

Similar Messages

I need below fields at my selection screen.From which table we can find the

Sales Org > only one selection field
Division > only one selection field
Channel > from u2013 to fields
Sales Office Channel > from u2013 to fields
Sales Rep Channel > from u2013 to fields
User ID of the CSR Channel > from u2013 to fields
Customer Channel > from u2013 to fields
Material Channel > from u2013 to fields
Date: Channel > from u2013 to fields
I need these fields at my selection screen.From which tables I find these things.I need this logic also.

I need help

From which table can I display PGI (material and quantity)for a spesific cu

Dear gurus,
From which table can I display PGI (material and quantity)for a spesific customer order?
Thanks in advance

HI
PGI and material quantity can be available in MSEG table
for this enter the sales order number in KDAUF or* MAT_KDAUF* fields in MSEG table
Also try with LIPS delivery item table and LIKP table
regards
SAP SD
Edited by: sapkpit_sd on Jul 22, 2010 8:14 AM

From which table, the current number is taken for a WM TO?

Dear Experts,
Kindly let me know when a transfer order is created in LT01, how the TO number is assigned?
Before assigning a number, from which table it takes the current number?
regards
shetty

Hi,
r u able to see the current no in LT01 tcode ,if it is means pls let me know the field of that.
and check with the below tables also,
LAGP
LECMOFF
LEIN
LINK
LINP
LINV
LL01
LL02
thanks,
sankar m

How to check from which table data is picking by datasource 0CDCY_ACT_ATTR

Hi Experts,
Could you please help me in finding out of the table from which datasource 0CDCY_ACT_ATTR is extracting.
As per my knowledge is should be extract from tables(infotypes) HRP5135 - 5141.If i am wrong please correct me.
Issue : My extractor(0cdcy_ACT_ATTR) is bringing wrong ACT_TYPE (Eg :5010) where as in table HRP5141 for that particular OBJID it is 9180( different).
Please help me why my extractor is bringing ACT_TYPE 5010.
This standard datasource and using Function Module : RCF_BIW_GET_ACTIVITY, How can i check from which table it is picking the data
Thanks in Advanve
Sree

Hi Sree,
In RSA3 on the first screen, you have the option to start debugging by marking the debug check box, once you put all the selections, click on execute and it will go to debug mode, then keep on pressing F5. It will debug your code line by line, then you can check for all the select statements.
Or once the debugging is started you will have the option to put break point on all the select statements in one shot, you can get in touch with your ABAP team.
Regards,
Durgesh.
Edited by: Durgesh Gandewar on Jul 24, 2011 8:20 PM

How to get Essential and additional qualifications ,From which table

Hi all,
In one of my requirement, the report should show the Qualifications and Essential qualifications columns in the output.
Requirement is :
1. I have brought qualifications of Applicant from PB0024 table.
2. I need to compare these with the Qualifications maintained in Job for the pernr.
3. There are two types of Qualifications namely essential Qualifications and additional Qualifications.
4.
How do we get the Qualifications maintained for a job/Position?
How can we distinguish between Qualifications and essential Qualifications maintained for a job at the database table level ?
Please reply ASAP.
Regards,
Rama.P

Hi Dilek Ersoz Adak,
How can we get the jobs assigned to a position ,from which table ?
Actually i am doing a custom recruitment report which displayes several fields along with the qualificaions and additional qualifications.
For the two fileds: in the spec it is given as:
14.     Qualification (This is maintained in HRPE_PROFQ_TBJID-infotype 0024 of the employee. Thus, check Position maintained for the employee in P4002_OBJID, against this position check for Essential Qualification, related object type u2018Qu2019 HRPE_PROFQ_ESSENTIAL, compare this with the qualifications maintained for the employee in Infotype 0024, and display wherever these maintained.)
15.     Additional Qualification (This is maintained in HRPE_PROFQ_TBJID-infotype 0024 of the employee. Thus, check Position maintained for the employee in P4002_OBJID, against this position check for Essential Qualification, related object type u2018Qu2019, compare this with the qualifications maintained for the employee in Infotype 0024, and display all qualifications for which HRPE_PROFQ_ESSENTIAL is not maintained.)
16.     Proficiency (HRPE_PROFQ_PROFC_TEXT)
in clear :
1.       Positions (Object Type S) are linked to Job through relationship A 007
2.       In APDISCOM scenario, Qualifications (Object Type Q) are attached to Object u2018Jobu2019 (Object Type C) through Transaction Code PPPM
3.       Now, for a Job there can two types of qualifications maintained Essential Qualifications (ii) Additional Qualifications
4.       For essential qualifications: Against a Qualification we can maintain u201Cessential check boxu201D HRPE_PROFQ
5.       For additional qualifications: Those qualifications for which HRPE_PROFQ is not maintained
6.       Now, for an applicant, Qualifications are maintained in Infotype 0024, wherein the necessary qualifications would be selected.
7.       In the report for field of u201Cessential qualificationu201D, check for qualifications maintained in Infotype 0024 and compare it with qualifications maintained in Job (through Position assigned to the applicant in P4002_OBJID)
8.       Check for essential qualification HRPE_PROFQ maintained in Job and check whether the same Q is maintained in Infotype 0024 for the applicant, if yes, then generated Text of the Q
9.       If there are any additional qualifications which are maintained in the job and not maintained in Infotype 0024, DONu2019T GENERATE ANYTHING IN FIELD
10.   If there are any additional qualifications which are maintained in the job and if same are maintained in Infotype 0024, generate Q text under field of u201CAdditional Qualificationsu201D in the report
11.   If there are any extra qualifications in infotype 0024, which are not maintained in Job, then generate Q text under field of u201CAdditional Qualificationsu201D in the report
Please provide the procedure.(For clarity copy and paste the text in a MS-word)
Please reply ASAP.
Regards,
Rama.P
Edited by: Rama Chary on Dec 9, 2009 1:28 AM

Select from a table from other schema

Hi,
I want to make a select from a table how is into other Schema and into other instance.
form example, if I have _2 schemas (in diferent instances)_:
SCHEMA1 =
*(DESCRIPTION =*
*(ADDRESS =*
*(PROTOCOL = TCP)*
*(HOST = XXX.XXX.XXX.XX1)*
*(PORT = 1560)*
*(CONNECT_DATA =*
*(SERVER = DEDICATED)*
*(SERVICE_NAME = SCHEMA1)*
SCHEMA2 =
*(DESCRIPTION =*
*(ADDRESS =*
*(PROTOCOL = TCP)*
*(HOST = XXX.XXX.XXX.XX2)*
*(PORT = 1560)*
*(CONNECT_DATA =*
*(SERVER = DEDICATED)*
*(SERVICE_NAME = SCHEMA2)*
and into SCHEMA2 there is a table TABLE_A.
If I`m connected into SCHEMA1:
how can I do to make a select from the TABLE_A?
thanks very much.

1) Referring to an entry in the tnsnames.ora file as a "schema" as you have here with schema1 and schema2 is likely to be confusing. You have multiple schemas in the same database-- in this case, you appear to be trying to query tables in a different database. If we try to answer using your TNS aliases "schema1" and "schema2", there is likely to be a great deal of confusion between schemas/ databases/ and TNS aliases. So I will assume that your tnsnames.ora file actually reads
TNS_ALIAS1 =
(DESCRIPTION =
    (ADDRESS =
      (PROTOCOL = TCP)
      (HOST = HOST1)
      (PORT = 1560)
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = DB1)
TNS_ALIAS2 =
(DESCRIPTION =
    (ADDRESS =
      (PROTOCOL = TCP)
      (HOST = HOST2)
      (PORT = 1560)
(CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = DB2)
)2) Given the TNS aliases above, assuming that we are talking about the tnsnames.ora file on HOST1, you would need to create a database link from DB1 to DB2. You can either specify a fixed username and password for the database link or you can specify that the connection happens as the current user (which assumes that the passwords are synchronized between the databases).
CREATE DATABASE LINK to_db2
CONNECT TO username_on_db2
IDENTIFIED BY password_on_db2
USING 'TNS_ALIAS2'3) Assuming the database link is in place
SELECT *
FROM schema2.table_name@to_db2Justin

From which table is the support desk message picked?

Hi Experts,
In CRM_DNO_MONITOR tcode, i want to know from where support desk message number picking from(from which table).i want where this support desk message number(number range) is maintained in SPRO.
steps i'm working out:
I'm executing CRN_DNO_MONITOR tcode with transaction number, after executing i double click on the details where it will display the details. Going to <b>business transaction</b> and click on create where it will display create business transaction options. Select <b>Support Desk Message</b> and click on create.
In the very next screen, it will display the support desk message number. I want to know from where this support desk message number is picking(table name or settings in spro).
Thanks,
Pawan

Hey pavan,
The tcode for number range maintancance is crmc_nr_ra_service.
Every number range has some number like 01, 02 03 assigned to it..
TO find out which number range your transaction type is using go to : Spro->Customer relationship managemnt->transaction type-> Selct the desired transac tion type and click on details:::
There you can find the number range assignment in field internal number range...
Revert for ny clarifications and plz do forget to reward if this post was usefull..

From which tables i would find the delivery and billing document field..??

I need to create an ALV report which displays the following details in the output.
Order No Item No     Material     Order Qty     Item Category     Plant     Delivery     Billing Document     Sales Org     Dist Channel     Division     Created By     Created On      Changed On
For(Order No Item No     Material     Order Qty     Item Category     Plant) i took the fields from vbap and
for(Sales Org     Dist Channel     Division     Created By     Created On      Changed On)i took the fields from vbak..
From which tables i would find the delivery and billing document field related to sales document.??
need help...
Moderator message : Requirements dumping not allowed, thread locked.
Edited by: Vinod Kumar on Mar 6, 2012 2:53 PM

i am new to abap...so i dont have idea about sd table relationship.
so please reply how to add delivery and billing doc in my coding below..
*& Report ZINAA_SD
REPORT zinaa_sd.
TABLES: vbap, vbak, vbfa.
TYPE-POOLS: slis.
CONSTANTS: c_x TYPE char1 VALUE 'X'.
TYPES:
        BEGIN OF st_vbap,
         vbeln TYPE vbap-vbeln,
         posnr TYPE vbap-posnr,
         matnr TYPE vbap-matnr,
         pstyv TYPE vbap-pstyv,
         kwmeng TYPE vbap-kwmeng,
         werks TYPE vbap-werks,
        END OF st_vbap,
        BEGIN OF st_vbak,
          vbeln TYPE vbak-vbeln,
          erdat TYPE vbak-erdat,
          ernam TYPE vbak-ernam,
          vkorg TYPE vbak-vkorg,
          vtweg TYPE vbak-vtweg,
          spart TYPE vbak-spart,
          aedat TYPE vbak-aedat,
        END OF st_vbak,
       BEGIN OF st_final,
         vbeln TYPE vbap-vbeln,
         posnr TYPE vbap-posnr,
         matnr TYPE vbap-matnr,
         pstyv TYPE vbap-pstyv,
         kwmeng TYPE vbap-kwmeng,
         werks TYPE vbap-werks,
         erdat TYPE vbak-erdat,
         ernam TYPE vbak-ernam,
         vkorg TYPE vbak-vkorg,
         vtweg TYPE vbak-vtweg,
         spart TYPE vbak-spart,
         aedat TYPE vbak-aedat,
       END OF st_final.
DATA:
      lt_vbap TYPE TABLE OF st_vbap,
      ls_vbap TYPE st_vbap,
      lt_vbak TYPE TABLE OF st_vbak,
      ls_vbak TYPE st_vbak,
      lt_final TYPE TABLE OF st_final,
      ls_final TYPE st_final,
      lt_fieldcat TYPE slis_t_fieldcat_alv,
      ls_fieldcat TYPE slis_fieldcat_alv,
      layout TYPE slis_layout_alv,
      lt_sort TYPE slis_t_sortinfo_alv,
      ls_sort TYPE slis_sortinfo_alv.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_vbeln FOR vbap-vbeln,
                s_erdat FOR vbap-erdat.
SELECTION-SCREEN END OF BLOCK b1.
PERFORM select_data.
PERFORM loop_final.
PERFORM sort.
PERFORM a USING:
      'VBELN' TEXT-002,
      'POSNR' TEXT-003,
      'MATNR' TEXT-004,
      'KWMENG' TEXT-005,
      'PSTYV' TEXT-006,
      'WERKS' TEXT-007,
      'VKORG' TEXT-008,
      'VTWEG' TEXT-009,
      'SPART' TEXT-010,
      'ERNAM' TEXT-011,
      'ERDAT' TEXT-012,
      'AEDAT' TEXT-013.
PERFORM display.
*&      Form SELECT_DATA
      text
FORM select_data.
SELECT
   vbeln
   vkorg
   vtweg
   spart
   ernam
   erdat
   aedat
   INTO CORRESPONDING FIELDS OF TABLE lt_vbak
   FROM vbak
   WHERE vbeln IN s_vbeln AND erdat IN s_erdat.
IF sy-subrc = 0.
    SORT lt_vbak by vbeln.
ENDIF.
SELECT
   vbeln
   posnr
   matnr
   kwmeng
   pstyv
   werks
   INTO CORRESPONDING FIELDS OF TABLE lt_vbap
   FROM vbap
   FOR ALL ENTRIES IN lt_vbak
   WHERE vbeln = lt_vbak-vbeln.
IF sy-subrc = 0.
    SORT lt_vbap by vbeln.
ENDIF.
ENDFORM.                    "SELECT_DATA
*&      Form LOOP_FINAL
      text
FORM loop_final.
LOOP AT lt_vbap INTO ls_vbap.
    ls_final-vbeln = ls_vbap-vbeln.
    ls_final-posnr = ls_vbap-posnr.
    ls_final-matnr = ls_vbap-matnr.
    ls_final-kwmeng = ls_vbap-kwmeng.
    ls_final-pstyv = ls_vbap-pstyv.
    ls_final-werks = ls_vbap-werks.
    READ TABLE lt_vbak INTO ls_vbak WITH KEY vbeln = ls_vbap-vbeln BINARY SEARCH.
    ls_final-vkorg = ls_vbak-vkorg.
    ls_final-vtweg = ls_vbak-vtweg.
    ls_final-spart = ls_vbak-spart.
    ls_final-ernam = ls_vbak-ernam.
    ls_final-erdat = ls_vbak-erdat.
    ls_final-aedat = ls_vbak-aedat.
    APPEND ls_final TO lt_final.
    CLEAR ls_final.
ENDLOOP.
ENDFORM.                    "LOOP_FINAL
*&      Form SORT
      text
FORM sort.
ls_sort-spos = '01' .
ls_sort-fieldname = 'VBELN'.
ls_sort-tabname = 'LT_FINAL'.
ls_sort-up = c_x.
ls_sort-subtot = c_x.
APPEND ls_sort TO lt_sort .
ENDFORM.                    "SORT
*&      Form A
      text
     -->FNAME      text
     -->SELTEXT    text
     -->EMPHA      text
FORM a USING fname TYPE string seltext TYPE string.
IF fname = 'KWMENG'.
    ls_fieldcat-do_sum = c_x.
ENDIF.
ls_fieldcat-fieldname = fname.
ls_fieldcat-seltext_m = seltext.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR ls_fieldcat.
ENDFORM.                    "A
*&      Form ALV
      text
FORM display.
layout-zebra = c_x.
layout-colwidth_optimize = c_x.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
I_INTERFACE_CHECK                 = ' '
I_BYPASSING_BUFFER                = ' '
I_BUFFER_ACTIVE                   = ' '
   i_callback_program                = sy-repid
I_CALLBACK_PF_STATUS_SET          = ' '
I_CALLBACK_USER_COMMAND           = ' '
I_CALLBACK_TOP_OF_PAGE            = ' '
I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
I_CALLBACK_HTML_END_OF_LIST       = ' '
I_STRUCTURE_NAME                  =
I_BACKGROUND_ID                   = ' '
I_GRID_TITLE                      =
I_GRID_SETTINGS                   =
    is_layout                         = layout
    it_fieldcat                       = lt_fieldcat
IT_EXCLUDING                      =
IT_SPECIAL_GROUPS                 =
    it_sort                           = lt_sort
IT_FILTER                         =
IS_SEL_HIDE                       =
I_DEFAULT                         = C_X
I_SAVE                            = ' '
IS_VARIANT                        =
IT_EVENTS                         =
IT_EVENT_EXIT                     =
IS_PRINT                          =
IS_REPREP_ID                      =
I_SCREEN_START_COLUMN             = 0
I_SCREEN_START_LINE               = 0
I_SCREEN_END_COLUMN               = 0
I_SCREEN_END_LINE                 = 0
I_HTML_HEIGHT_TOP                 = 0
I_HTML_HEIGHT_END                 = 0
IT_ALV_GRAPHICS                   =
IT_HYPERLINK                      =
IT_ADD_FIELDCAT                   =
IT_EXCEPT_QINFO                   =
IR_SALV_FULLSCREEN_ADAPTER        =
IMPORTING
E_EXIT_CAUSED_BY_CALLER           =
ES_EXIT_CAUSED_BY_USER            =
    TABLES
    t_outtab                          = lt_final
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    "ALV

Selecting from two tables and confirming from them despites they not relate

Please I need a query to select from two tables that are not related to each other.
I also want to confirm data's as in verify wether what the user has entered is in accordance with what is in the tables
Examples
the first table is named "Card" and the second table is named "Student_Details"
Card table contains a column named "Pin_Number".
The Student_Details table contains fields such as Exam_Number, Name, Age, Sex.
The user has to Enter the Pin_Number which has to be confirmed in the Card table and Exam_Number which has to be confirmed in the Student_Details table and verify that both data's are correct.
Please I need the SQL and PL/SQL queries for this problem.
Thanks

Hi,
I think you need two different queries
You can write a procedure like:
create or replace procedure p1 (p_pin_number number, p_exam_number)
is
r_card_row            card%rowtype;
r_student_details     student_details%rowtype;
cursor c1 is
select *
    from card
   where pin_number = p_pin_number;
cursor c2 is
select *
    from student_details
   where exam_number = p_exam_number;
begin
open c1;
    loop
      fetch c1 into r_card_row;
      exit when c1%notfound;
      .... do whatever you want..... and the samething you can do with other cursor
    end loop;
close c1;
end p1;Hope this helps
Ghulam

From which table Gross amount can be picked

Hi,
From which tables the gross amount of line item of sales order can be picked.
Please give me the table names to fetch gross amount.
Regards,
Krishna

Hi,
Select the condition record number from VBAP i.e. KNUMH and pass this condition record number and condition type PR00 (Ctype PR00 is for gross value kindly check ) to KONV . in KONV KBETR would give the value .
Regards,
Raghavendra

Select from multiple tables without join statement

Hey Gurus,
I would like to make a select from a multiple tables to check if there is any reference to my data. I would like to do it with some elegancy, but I don't know how.
Is in abap sql possible to do it only with the select statement?
Or I was also think about a solution that I should fill some data structure with all of the tables which I want to select from and then just loop that data structure and do the select seperately from all of the tables. I just need to check if it founds some results, so no need to store it. If this solution would be fine what data structure should I use?
Or can tell me what would be the best for this?
My code for select from one table, which I want to make for multiple tables:
SELECT SINGLE id_kniznice FROM zbr_t_autori INTO wa_id
       WHERE id_kniznice EQ ls_extract-zview-id_kniznice.
     IF sy-dbcnt > 0.
       MESSAGE i000(zbr_msgc_lib).
       ls_extract-flags-vim_mark = '*'.
       MODIFY extract FROM ls_extract.
ENDIF.
Thank you for any posts.
Regards,
Robert

And there we go again...
Read this topic:
For All Entries is NOT better than INNER JOIN in most cases
And this one:
inner join vs for all entries
Also that one:
Re: LOOP AT vs INNER JOIN
JOINs are really better than for all entries in most cases. Problem is people tend to ignore basic things like using pks or indexes while making them.

Urgent. . .About select * from multiple tables

When I am doing the 'Select * from tables' in JSP,
sql = dbconn.prepareStatement("SELECT * FROM protein WHERE protein_id ='"+p_i+"'");
It works, because I only select one table.
Then, I change to select from two tables,
sql = dbconn.prepareStatement("SELECT * FROM protein, fuses WHERE protein_id ='"+p_i+"'");
It also works properly?
However, When I do like:
sql = dbconn.prepareStatement("SELECT * FROM protein, protein_taxa WHERE protein_id ='"+p_i+"'");
It doesn?t work.
So, I think it might be the problem that there is a common column 'protein_id' in both tables, although protein_taxa.protein_id is a foreign key of protein.protein_id. Therefore, I can select two table protein, fuses which have different columns, but no way to select the table they have same name column.
However, it?s essential for me to select all the data from the database. Any way I could achieve it? Thanks a lot!!

SELECT *
FROM protein, protein_taxa
WHERE protein.protein_id = 'a_protein_id'
and protein.protein_id = protein_taxa.protein_id It would also be good to indicate which fields you want on the select clause. This will liberate the server to return two fields with the same name.
SELECT protein.protein_id, protein.name, protein_taxa.taxa /* ??? */
FROM protein, protein_taxa
WHERE protein.protein_id = 'a_protein_id'
and protein.protein_id = protein_taxa.protein_id

Find out from which table a ES gets his data

Hello,
I'm now asking myself (for a couple of hours) how I can find out from which table(s) a Enterprise Service gets his data. I don't find any hint about this on ES Workplace, sproxy or soamanager. Has anyone a usefull hint for me?

Hi Marco,
This actually is an excellent question, as it allows to clearly realize, that ES Repository is only a modeling device and it does not contain any implementation details.
If you are interested in implementation details, then Services Registry and the respective backend system are your friends, as Enterprise Services are implemented in these backend systems and then published in the central phone book - the Services Registry.
If you haven't applied yet for the free access to the ES Workplace systems, do so as this will give you access to the SAP ERP discovery system that implements all the ECC related Enterprise Services.
Now, if you want to see the implementation details for a given service - start from the ES Workplace. Go to the Services Registry and find an ECC service of interest. Then, on the General tab of the service you will find the Namespace and Internal Name. Having these two values, log on to the ES Workplace ECC system, start transaction SE80 and select Enterprise Services Browser. If this option is not available, go to Menu -> Utilities -> Settings and select Enterprise Service Browser. Find the namespace and the service (by its internal name) then navigate to the implementing code - which typically is an ABAP Object interface and an implementing class.
The only reason I am referring to the ES Workplace Service Registry and its discovery system is, because it is a platform we all have access to. Each client builds their own SOA landscape, where only certain Enterprise Services are published in the Services Registry. And, of course, the system landscape can be more complex - containing not only ECC but other SAP Business Suite products.
I hope this helps a bit.
Regards,
Andrzej

From which table ,i ll get both the invoice and cleared amount ???

Hi Friends,
i am making a report for my sales client where finance part is also required.
the requirement is : the sales people want know the status of the invoice generated at their end.the report shud be like if they enter the invoice no,fiscal year and coustomer they will be able to see the status of the invoice.how much pmt has received for that particular invoice,wheather it is open or fully cleared?
From which table i can get both invoice no. and the payment/pmts rerceived against that invoce/invoices.
plz guide.
Regards,
Biswa

Hi,
SAP Standard Report itself covers all the requirements mentioned. With FBL5N, we get to know how much has been invoiced, paid and cleared and how much advance has been paid by customer etc., in one screen. Apart from this we have also all signs which show, which all invoices are due, overdue and its easy to analyse as well.
Was this requirement given by client after seeing this standard report?
Hope this info is helpful.
Regards,
Venkat

Select * from which tables for login attempts?

Similar Messages

Maybe you are looking for