Select Insert into staging table does not load varchar2

I have a select insert query that loads a prebuilt table. I am running this query through Heterogenous services which points to a MySql database.
If I run just a select query in SQL PLUS then it returns all rows just fine.
However, when I put the select insert into a stored procedure, compile it, then run it. It does not load any VARCHAR2 datatypes but it does load DATE and NUMBER datatypes.
I also have another table with VARCHAR2 and it loads fine.
How can the database only load some of the items in a row and not others (VARCHAR2)
For instance, the query will load TRANSACTION_ID, ORER_NUMBER but will not load any data into BILLFIRST_NAME, and their is data to load.
CREATE TABLE "TRAN_STG"
(     "TRANSACTION_ID" NUMBER(11,0),
     "ORDER_NUMBER" NUMBER(20,0),
     "BILL_FIRST_NAME" VARCHAR2(100 BYTE),
Any suggestions would be appreciated.

can it be that there are differences in characterset? Can it be that there are differences in datatypes? Can it be that there are differences in field length?

Similar Messages

When selecting a website the website does not load, I keep going back to my home page?

If I receive a message to my mailbox and there is a link within the message, the url does not load. It does open FireFox but goes to my home page on Firefox.

BY removing avg toolbar from your firefox adds-on should remove this problem

Read data from E$ table and insert into staging table

Hi all,
I am a new to ODI. I want your help in understanding how to read data from an "E$" table and insert into a staging table.
Scenario:
Two columns in a flat file, employee id and employee name, needs to be loaded into a datastore EMP+. A check constraint is added to allow data with employee names in upper case only to be loaded into the datastore. Check control is set to flow and static. Right click on the datastore, select control and then check. The rows that have violated the check constraint are kept in E$_EMP+ table.
Problem:
Issue is that I want to read the data from the E$_EMP+ table and transform the employee name into uppercase and move the corrected data from E$_EMP+ into EMP+. Please advise me on how to automatically handle "soft" exceptions in ODI.
Thank you

Hi Himanshu,
I have tried the approach you suggested already. That works. However, the scenario I described was very basic. Based on the error logged into the E$_EMP table, I will have to design the interface to apply more business logic before the data is actually merged into the target table.
Before the business logic is applied, I need to read each row from the E$EMP table first and I do not know how to read from E$EMP table.

Conditional Insert into staging table by using sqlloader

Hi,
In Oracle apps I'm submitting a concurrent program programmatically which will call sqlloader and insert into a staging a table.
This table consists of 30 columns.Program has one input parameter.If parameter value = REQUIRED Then it should insert into first three columns of staging table.If it's APPROVED then it should insert into first 10 columns of the same table.
Data file is pipe delimited file which may or may not have all possible values :For Required,I many not have all three column values

>
I think you understood the thinks wrongly. OP marked UTL_FILE as the correct answer, which is again a server side solution.
>
Perhaps you failed to notice that the answer now marked correct was posted AFTER mine. I'm not clairvoyant and OP did not state whether a server side or client side solution was appropriate.
I stand by my comments. Using an external table is an alternative to sql loader but, as I said, simply using an external table instead of sql loader doesn't address OPs problem.
>
And IMO, external table will be faster than UTL_FILE
>
I'd be more concerned with why OP wants to write a procedure to parse flat files, deal with data conversion errors and perform table inserts when Oracle already provides that functionality using either external tables or sql loader.
I would suggest loading the file into a new staging table that can hold all of the columns that might be contained in the flat file. Then the appropriate data can be moved to OPs staging table according to the required business rules.
Sounds like we each think OP should reconsider the architecture.

Select All in a table does not work for Drag and Drop

Hi. I am using Jdeveloper 11.1.1.2 but have also reproduced in 11.1.1.3.
I am trying to implement drag and drop rows from one table to another. Everything works fine except when I do a Select All (ctrl-A) in a table, the table visually looks like all rows are selected, but when I try to click on one of the selected rows to drag to the other table, only the row I click on is dragged.
I tried setting Range Size -1, fetch mode to FETCH_ALL, content delivery to "immediate" but nothing works.
I even have reproduced not using a view object but just a List of beans with only 5 or 10 beans showing in the table.
Does anyone know how to get Select All to work for a Drag Source?
Thanks.
-Ed

Frank-
OK, thanks for looking into that. I also submitted this service request, which includes a simple sample app to demonstrate the problem:
SR #3-2387481211: ADF Drag and Drop does not work for rows in table using Select All
Thanks again for the reply.
-Ed

When my home page loads on igoogle it shows my gmail in the hoem page box but when I actually get into gmail it does not load the current emails

I have gmail preloaded in a section of my google home page. But when I click on the gmail link itself it only posts email from a few days ago when this started and does not show any of the newer emails

I'm not sure what you try to do.<br />
If you type or paste http://odb.org/ in the location bar then that website should open.
Only if you use the https: protocol then encryption is used and the technical info will show that like you see with this website (Verified by Equifax).
Reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)

A selected row in af:table does not get sorted.

Hi,
When a table supports single selection and the table contains quantity of rows gt it can fit into its viewport, then, on sorting, selected row gets out of the sorting process. But when you move to the end of the table, select a row there and then sort the table, then all rows sorted correctly. The selected row, after sorting, always set as a first row in the current viewport, doesn't matter whether it is in the order or out of it.
Noteworthy, when number of rows is lt the viewport allows:
1. sorting works as it should to;
2. on sorting/PPR'ing, as it gets some time, one can see how the viewport updates in two steps and in the first step the first row is the selected one.
JDev's version is 11.1.1.3.0.
VO, iterator and tree bindings, af:table all the props related to data retrieving, fetching and row displaying have default values.
What can cause that?
Thx,
Y.

Hi,
so what you are saying is that the selected table row is not sorted but added on top. I tried to reproduce this with 11.1.1.3 but can't see the issue. I tried with editable and read-only tables
Frank

Menu selection: Insert / Media / Image Viewer does not exists

Hi,
I cannot see menu Insert / Media / Image Viewer
What am I missing?
My version is from
"Adobe Creative Suite 6 Design & Web Premium"
--BRH

It doesn't exist in CS6. Adobe discontinued this feature because DW is not an image gallery creation tool. It's web authoring software.
If you can work with jQuery, there are dozens of image gallery & slideshow plugins you could use that are much nicer.
Wow Slider
jQuery Cycle 2
Nivo Slider
Nancy O.

The SIM card inserted in this iPhone does not appear to be supported. 3-UK

Hi,
I've recently changed my iPhone from the UK Carrier o2 to the UK Carrier Three. When I inserted the 3 sim, iPhone immediately switches to a screen which indicates to connect iPhone to iTunes or allows you to slide for emergency. When I connected to iTunes the following message appears:
"The SIM card inserted into this iPhone does not appear to be supported"
"Only compatible SIM cards from a supported Carrier may be used to activate iPhone. Please insert the SIM that came with iPhone or visit the Carriers store to receive a replacement SIM."
When I went to the Three store they weren't able to tell me what was the problem and suggested I go to apple (unfortunatley I'm not able to go to an apple store any time soon). I bought the phone from apple not o2 so I don't think it's locked, and I would imagine it would say if that was the case?
Thanks in advance for your time!

Your 3G iPhone is locked to O2 and Peter's link to O2 unlock iPhone is the correct way to unlock.
I've had mine iPhone unlocked by O2 just by completing the unlocking form simple as that, 3 days later O2 sends a text message saying unlock is sucessful. Here you have to remove O2 simcard replace it with your new simcard (3) and connect to itunes and sync.
After completion 3 mobile shows on the iTunes summary, disconnect from iTunes and restart your iPhone. That's it.

I have a slideshow I made in iPhoto and it is showing in iTunes movies but when I select it and click 'sync' it does not load into my phone. I have made sure it is a mobile version of the slideshow

I have a slideshow I made in iPhoto and it is showing in iTunes movies but when I select it and click 'sync' it does not load into my phone. I have made sure it is a mobile version of the slideshow. How do I load it onto my phone? Or also, how do I play it from iPhoto or iTunes through Apple TV

Was the iPod setup via iTunes on this computer?
Setup via wifi?
Was the iPod previous synced to another iTunes library/computer?
Have you successfully synced from this iTunes library/computer before?
Do the songs play in iTunes?
Do you have the right boxes checked to sync?
iTunes: Syncing media content to iOS devices and iPod
Try syncing using the manual method

Selecting Records from 125 million record table to insert into smaller table

Oracle 11g
I have a large table of 125 million records - t3_universe. This table never gets updated or altered once loaded, but holds data that we receive from a lead company.
I need to select records from this large table that fit certain demographic criteria and insert those into a smaller table - T3_Leads - that will be updated with regard to when the lead is mailed and for other relevant information.
My question is what is the best (fastest) approach to select records from this 125 million record table to insert into the smaller table. I have tried a variety of things - views, materialized views, direct insert into smaller table...I think I am probably missing other approaches.
My current attempt has been to create a View using the query that selects the records as shown below. Then use a second query that inserts into T3_Leads from this View V_Market. This is very slow. Can I just use an Insert Into T3_Leads with this query - it did not seem to work with the WITH clause?    My Index on the large table is t3_universe_composite and includes zip_code, address_key, household_key.
CREATE VIEW V_Market as
WITH got_pairs    AS
     SELECT /*+ INDEX_FFS(t3_universe t3_universe_composite) */ l.zip_code, l.zip_plus_4, l.p1_givenname, l.surname, l.address, l.city, l.state, l.household_key, l.hh_type as l_hh_type, l.address_key, l.narrowband_income, l.p1_ms, l.p1_gender, l.p1_exact_age, l.p1_personkey, e.hh_type as filler_data, 1.p1_seq_no, l.p2_seq_no
     ,      ROW_NUMBER () OVER ( PARTITION BY l.address_key
                                  ORDER BY      l.hh_verification_date DESC
                  ) AS r_num
     FROM   t3_universe e
     JOIN   t3_universe l ON
            l.address_key = e.address_key
            AND l.zip_code = e.zip_code
          AND   l.p1_gender != e.p1_gender
             AND   l.household_key != e.household_key
             AND l.hh_verification_date >= e.hh_verification_date
SELECT *
FROM got_pairs
where l_hh_type !=1 and l_hh_type !=2 and filler_data != 1 and filler_data != 2 and zip_code in (select * from M_mansfield_02048) and p1_exact_age BETWEEN 25 and 70 and narrowband_income >= '8' and r_num = 1
Then
INSERT INTO T3_leads(zip, zip4, firstname, lastname, address, city, state, household_key, hh_type, address_key, income, relationship_status, gender, age, person_key, filler_data, p1_seq_no, p2_seq_no)
select zip_code, zip_plus_4, p1_givenname, surname, address, city, state, household_key, l_hh_type, address_key, narrowband_income, p1_ms, p1_gender, p1_exact_age, p1_personkey, filler_data, p1_seq_no, p2_seq_no
from V_Market;

I had no trouble creating the view exactly as you posted it. However, be careful here:
and zip_code in (select * from M_mansfield_02048)
You should name the column explicitly rather than select *. (do you really have separate tables for different zip codes?)
About the performance, it's hard to tell because you haven't posted anything we can use, like explain plans or traces but simply encapsulating your query into a view is not likely to make it any faster.
Depending on the size of the subset of rows you're selecting, the /*+ INDEX hint may be doing your more harm than good.

Can select, but cannot insert into oracle tables using php.

I am having trouble inserting data into a tables in oracle using PHP. I can insert into the tables using baninst1, but nothing else. I can't even insert using the tables' owner. Every time I try I get the ORA-00492 error of table or view does not exist. However, I can run a select statement just fine. So far, baninst1 is the only user that can actually do inserts. I've triple checked all the table grants and everything is fine. Also, I can copy/paste the exact insert statement into SQL*Plus and it works with the correct user. It doesn't have to be baninst1. I've tried everything I can think of. I've tried putting the table name in quotes, adding the schema name to the table, checking public synonyms, but everything appears to be ok. I would greatly appreciate any suggestions others may have.
I'm using PHP 5.2.3 with an oracle 9i DB.

Here is the code that doesn't work. It works only with baninst1, no other username will work and all I do is change the my_username/my_password to something different. This is one example function where I try to do an insert, but it doesn't work on any of the tables I try.
Thanks for looking.
class Oracle {
     private $oracleUser = "my_username";
     private $oraclePassword = "my_password";
     private $oracleDB = "MY_DB";
     private $c = null;
     function Connect() {
          if ( !($this->c = ocilogon( $this->oracleUser, $this->oraclePassword, $this->oracleDB ) ) )
               return false;
          return true;
     function AddNewTest($testName, $course, $section, $term, $maxAttempts, $length, $startDate, $startTime, $endDate, $endTime)
          $result = "";
          if( $this->c == null )
               $this->Connect();
          $splitIndex = strpos($course, " ");
          $subjectCode = substr($course, 0, $splitIndex);
          $courseNumber = substr($course, $splitIndex + 1);
          $insertStatment = "insert into szbtestinfo(szbtestinfo_test_name,
                                                            szbtestinfo_course_numb,
                                                       szbtestinfo_section,
                                                            szbtestinfo_max_attempts,
                                                            szbtestinfo_length_minutes,
                                                            szbtestinfo_start,
                                                            szbtestinfo_end,
                                                            szbtestinfo_id,
                                                            szbtestinfo_subj_code,
                                                            szbtestinfo_eff_term)
                                                            values( '" . $testName .
               "', '" . $courseNumber .
               "', '" . $section .
               "', " . $maxAttempts .
               ", " . $length .
               ", to_date('" . $startDate . " " . $startTime . "', 'MM/DD/YYYY HH24:MI')" .
               ", to_date('" . $endDate . " " . $endTime . "', 'MM/DD/YYYY HH24:MI')" .
               ", szsnexttest.nextval" .
               ", '" . $subjectCode .
               "', '" . $term . "')";
          //return $insertStatment;
          $s = OCIParse($this->c, $insertStatment);
          try
               $result = OCIExecute($s);
          catch(exception $e)
          return $result;
     }

Why while in Bridge Load Files into photoshop Layers does not work?

In Bridge, Tools>Photoshop>Load Files into Photoshop Layers does not work. I have two images selected and when I execute that comman in Bridge nothing happens. I exited and restarted both PS and Bridge and still nothing. I am working in Windows 7 and Photoshop cs6.

No I tried File/scripts/load file into stack and still did not work.
There was an update to bridge and now it works. Thanks so much.

Record not inserting into sap table with connector framework ?

here is the code, but record not being inserting into the table ... but same piece of code working fine while updating ... the record ...
try {
interaction = connection.createInteractionEx();
IInteractionSpec interactionSpec = interaction.getInteractionSpec();
String functionName = "Z_XYZ";
interactionSpec.setPropertyValue("Name", functionName);
String writingTable = "MYTABLE";
RecordFactory rf = interaction.getRecordFactory();
MappedRecord importParams = rf.createMappedRecord("input");
importParams.put("ATTR1", "VALUE1");
importParams.put("ATTR2", "VALUE2");
IFunction function = connection.getFunctionsMetaData().getFunction(functionName);
IStructureFactory sf = interaction.retrieveStructureFactory();
IRecordSet table = (IRecordSet) sf.getStructure(function.getParameter(writingTable).getStructure());
table.insertRow();
table.setString("ATNAME", "VALUE");
table.setString("ATWRT", "VALUE");
importParams.put(writingTable, table);
MappedRecord output = (MappedRecord) interaction.execute(interactionSpec, importParams);
} catch (Exception e) {
any idea?
than ks
MMK

Hi Mohan,
Does a creation through SE37 with the same input work?
Yoav.

Insert into local table as select from remote tables

Hi all,
In Oracle DB version 11g i have the following issue:
I want to insert into a table in the current schema as selecting data from two remote tables. I execute the insert in portions of data. Firstly, when the target table where i want to insert is empty the Select as Insert is being executed very fast. But after every insert i made , the performance became worse than the previous one. I have no FKs or indexes in the local table/target table where i'm inserting/... I tried using /*+ append*/ hint but no success...what should be the reason of that?
Thanks in advance,
Alexander.

a.stoyanov wrote:
Hi all,
In Oracle DB version 11g i have the following issue:
I want to insert into a table in the current schema as selecting data from two remote tables. I execute the insert in portions of data. Firstly, when the target table where i want to insert is empty the Select as Insert is being executed very fast. But after every insert i made , the performance became worse than the previous one. I have no FKs or indexes in the local table/target table where i'm inserting/... I tried using /*+ append*/ hint but no success...what should be the reason of that?
Thanks in advance,
Alexander.How should we know? You don't give enough information to be able to tell. Not even the SQL involved.
Please read {message:id=9360002} and {message:id=9360003}
and follow the advice given.

Select Insert into staging table does not load varchar2

Similar Messages

Maybe you are looking for