Select option for a character type field

Hi all as per my requirement i have a selection for a data type char40
Hence in my wddoinit method i used the following code to generate the select options in WD
create a range table that consists of this new data element
LT_RANGE_TABLE = WD_THIS->M_HANDLER->CREATE_RANGE_TABLE( I_TYPENAME = 'CHAR40' ).
add a new field to the selection
WD_THIS->M_HANDLER->ADD_SELECTION_FIELD( I_ID = 'CHAR40'
IT_RESULT = LT_RANGE_TABLE I_READ_ONLY = READ_ONLY I_NO_INTERVALS = 'X').
The select option is properly displayed but "char" word is infront of the selection fields.
I want to remove this char word.
Can someone please advice me on this ?

Hi
Modify the Add_selection_field call to add descrption for the field.
if you dont want anything pass space.
* add a new field to the selection
WD_THIS->M_HANDLER->ADD_SELECTION_FIELD(
I_ID = 'CHAR40'
IT_RESULT = LT_RANGE_TABLE
I_READ_ONLY = READ_ONLY
I_NO_INTERVALS = 'X'
I_DESCRIPTION = ' ' " whatever you pass here will come as a label to the field or we can say
" inplace of CHAR
thanks
sarbjeet singh

Similar Messages

Problem with select range for a character type field. Kindly Help! Urgent!

Hi Experts,
    I have to write a report to pull data from a table BUT000 for a selected range of BPEXT field values in selection screen.
    In the table BUT000, the BPEXT field is type char. Now what is happening is that if the user gives a range in selection screen from 1000 to 1010 the query pulls all the records where teh forst character starts from 1.
For example if the table has
    BPEXT
    1
    10
    100
    101
    1000
    1001
    1002
    1005
    1010
    20
    200
    2000
Then my query pulls
   BPEXT
    101
    1000
    1001
    1002
    1005
    1010
   Instead it should pull only
   BPEXT
    1000
    1001
    1002
    1005
    1010
    My guess this is because the BPEXT field is of CHAR type instead of numeric.
    What shall i do to solve this problem? Kindly help please!
Thanks
Gopal
Message was edited by:
        gopalkrishna baliga

Hi Chakradhar,
    How to find the conversion exit for BPEXT field?
    How to use the conversion exit in a select query in my ABAP report? Any sample code will be really helpfull.
   Please help!
Thanks
Gopal

Restrict Select-Options for Logical Database field

The way we restrict select options for custom defined select option fields on selection screen.. can we restrict select options for standard Logical Database fields?
i.e. report uses PNPCE logical database and has field called PERNR. I want to restrict select options for this PERNR field so that it has options for 'Select single values' only.
Thanks,
Falguni
Edited by: Falguni V on Nov 13, 2010 6:42 AM

You can user AT SELECTION-SCREEN event, and check whether any record is having high value for PNPPERNR.

Select-options for date field.

Hi all,
i need to give select options for Date field.How can i give that.
Thanks & Regards
Ravi.

Hi Ravi,
Use the Component WDR_SELECT_OPTIONS to include select options in Web Dynpro ABAP. Follow these steps:
1. In your Component , "Used Componet" tab add Component WDR_SELECT_OPTIONS . Component Use can be any name that you want to give, eg SELECT_OPTIONS
2. Go to the View where you want to include the Date Select Options. I am assuming that you already have an Attribute of Type DATS in your context.
3. View: Properties Tab:Create Controller Usage and select
SELECT_OPTIONS     WDR_SELECT_OPTIONS
SELECT_OPTIONS     WDR_SELECT_OPTIONS     INTERFACECONTROLLER
4. View Layout Tab:Include a View Container. In this view container we will show the Date Select Options.
5. View Attributes Tab: Create Following two attributes:
M_HANDLER type IF_WD_SELECT_OPTIONS
M_WD_SELECT_OPTIONS type IWCI_WDR_SELECT_OPTIONS
6: View Methods Tab: Create a method eg CREATE_SELECTION_SCREEN. Call this method in the WDDOINIT of the view.
7:CREATE_SELECTION_SCREEN: Write following Code:
* Data Declaration
data:
        lt_range_table TYPE REF TO DATA.
data:
        lr_componentcontroller TYPE REF TO IG_COMPONENTCONTROLLER,
        lr_componentusage TYPE REF TO IF_WD_COMPONENT_USAGE.
* Execution
* Create Used Component
lr_componentusage = wd_this->wd_cpuse_select_options( ).
if LR_COMPONENTUSAGE->HAS_ACTIVE_COMPONENT( ) is initial.
    lr_componentusage->create_component( ).
endif.
* Get pointer to interface controller of select options
wd_this->M_WD_SELECT_OPTIONS = wd_this->wd_cpifc_select_options( ).
* initialize selction screen
wd_this->M_HANDLER = wd_this->M_WD_SELECT_OPTIONS->init_selection_screen( ).
* Create Range Table for: Date
CALL METHOD WD_THIS->M_HANDLER->CREATE_RANGE_TABLE
    EXPORTING
      I_TYPENAME     = 'DATS'
    RECEIVING
      RT_RANGE_TABLE = lt_range_table.
* Add Selection Field for: Date
CALL METHOD WD_THIS->M_HANDLER->ADD_SELECTION_FIELD
    EXPORTING
      I_ID                         = '<name of date attribute in the context>'
*      I_WITHIN_BLOCK               = MC_ID_MAIN_BLOCK
*      I_DESCRIPTION                =
*      I_IS_AUTO_DESCRIPTION        = ABAP_TRUE
      IT_RESULT                    = lt_range_table
*      I_OBLIGATORY                 = ABAP_FALSE
*      I_COMPLEX_RESTRICTIONS       =
*      I_USE_COMPLEX_RESTRICTION    = ABAP_FALSE
*      I_NO_COMPLEX_RESTRICTIONS    = ABAP_FALSE
*      I_VALUE_HELP_TYPE            = IF_WD_VALUE_HELP_HANDLER=>CO_PREFIX_NONE
*      I_VALUE_HELP_ID              =
*      I_VALUE_HELP_MODE            =
*      I_VALUE_HELP_STRUCTURE       =
*      I_VALUE_HELP_STRUCTURE_FIELD =
*      I_HELP_REQUEST_HANDLER       =
*      I_LOWER_CASE                 =
*      I_MEMORY_ID                  =
*      I_NO_EXTENSION               = ABAP_FALSE
*      I_NO_INTERVALS               = ABAP_FALSE
*      I_AS_CHECKBOX                = ABAP_FALSE
*      I_AS_DROPDOWN                = ABAP_FALSE
*      IT_VALUE_SET                 =
*      I_READ_ONLY                  = ABAP_FALSE
*      I_DONT_CARE_VALUE            =
*      I_EXPLANATION                =
      I_TOOLTIP                    = 'Select Date'.
8: To Fetch Data entered in the selection field, write following code on action of button click:
data:
        lt_date type REF TO DATA.
FIELD-SYMBOLS:
                 <fs_date> TYPE table.
* retrieve Date from Select Options
CALL METHOD WD_THIS->M_HANDLER->GET_RANGE_TABLE_OF_SEL_FIELD
    EXPORTING
      I_ID           = '<attrib_name>'
    RECEIVING
      RT_RANGE_TABLE = lt_date.
* assign Date Field Symbol
ASSIGN lt_date->* to <fs_date>.
9: Windows Window Tab: In the View Conatiner, embed the WND_SELECTION_SCREEN view from SELECT_OPTIONS component Usage of WDR_SELECT_OPTIONS component.
Regards,
Reema.

Validation of Select Options for a field

Hi All,
I need to write a validation logic for a select option for VTWEG (Distribution Channel).
select-options: s_vtweg for komg-vtweg.
I need to check whether the user has entered the correct value based on the search help. The check table of this particular field is TVTW.
Following is the code i wrote under the AT SELECTION-SCREEN block:
IF NOT S_VTWEG-LOW IS INITIAL.
SELECT SINGLE VTWEG INTO KOMG-VTWEG FROM TVTW
                                 WHERE VTWEG IN S_VTWEG.
IF SY-SUBRC NE 0.
CONCATENATE ' Please enter the correct
                                Distribution Channel '
Z_MSG INTO Z_MSG.
SET CURSOR FIELD 'S_VTWEG-LOW'.
MESSAGE E000 WITH Z_MSG.
ENDIF.
ENDIF.
It works fine when the user enters a wrong value in the S_VTWEG-LOW field, where as if i gives more than one wrong value in the range or giving individual values its not working. Let me know how to do the validation check for multiple values entered individually or in ranges.
Could you please suggest how to resolve this problem.
Thank You,
Suresh

You could do something like this.....here looping at the select-option table and check the values for low and high.
report zrich_0003.
tables: komg.
data: z_msg(100) type c.
select-options: s_vtweg for komg-vtweg.
at selection-screen.
loop at s_vtweg.
    if not s_vtweg-low is initial.
      select single vtweg into komg-vtweg from tvtw
             where vtweg = s_vtweg-low.
      if sy-subrc ne 0.
        concatenate ' Please enter the correct
        distribution channel '
                  z_msg into z_msg.
        set cursor field 'S_VTWEG-LOW'.
        message e001(00) with z_msg.
      endif.
    endif.
    if not s_vtweg-high is initial.
      select single vtweg into komg-vtweg from tvtw
             where vtweg = s_vtweg-high.
      if sy-subrc ne 0.
        concatenate ' Please enter the correct
        distribution channel '
                  z_msg into z_msg.
        set cursor field 'S_VTWEG-HIGH'.
        message e001(00) with z_msg.
      endif.
    endif.
endloop.
Regards,
Rich Heilman

Multiple select options for an input field

Hi All,
We have a requirement where in we need to provide multiple select options for an input field in a BSP application and get output relevant to all the given inputs(do not require range).
Please do let me know how to solve this.
Thanks & Regards,
Lavanya .

Hi,
The requirement is : Suppose there is a input field PLANT.
If we give input for plant it gives related output.
Now if it is required to give 5 or 6 inputs..like plant1,plant2...plant6 and get the output related to all 6 inputs.
(Like we implement in ABAP)
Please do let me know how can this be implemented in BSP.
Thanks & Regards,
Lavanya.

How to create select-options for 3 fields out of 5 by FREE_SELECTIONS_INIT

Hi Experts,
I am using the Function Modules FREE_SELECTIONS_INIT and FREE_SELECTIONS_DIALOG to create the select-options dynamically on the selection screen.
My problem is that I am passing a field list of 10 fields in the FIELDS_TAB of the function.
Now it creates the select-options for all 10 fields. I want to create select-options for only 5 fields initially and let the user select out of the remaining 5 fields to create the select-options.
How to achieve this.?
I tried by passing the 5 fields in FIELDS_NOT_SELECTED table but they get hidden and once hidden I am not able to get them back in my field list.
Please help me out.
Useful answers will be suitably rewarded.
Thanks in advance.
Regards,
Himanshu

Hi Experts,
I am using the Function Modules FREE_SELECTIONS_INIT and FREE_SELECTIONS_DIALOG to create the select-options dynamically on the selection screen.
My problem is that I am passing a field list of 10 fields in the FIELDS_TAB of the function.
Now it creates the select-options for all 10 fields. I want to create select-options for only 5 fields initially and let the user select out of the remaining 5 fields to create the select-options.
How to achieve this.?
I tried by passing the 5 fields in FIELDS_NOT_SELECTED table but they get hidden and once hidden I am not able to get them back in my field list.
Please help me out.
Useful answers will be suitably rewarded.
Thanks in advance.
Regards,
Himanshu

Selection options for field display text instead of key

Hi All,
In the selection screen in my reports, when the user clicks on the selection options for one the fields to display the possible values they can use. Instead of the key the pop up box only displays the text for that field. This is an issue because one of the fields is equipment number and the user needs to be able to see the key not the descriptions. This is occurring in multiple reports and for multiple fields. I haven't been able to find anything in the infoobject properties or the query properties to change this.
Please help!
Edited by: Anthony Loh on Sep 29, 2010 10:57 PM

Hi Anthony,
Cud u pls check in backend how it is created ...
RSA1>Mdeling>IO Properties>Second tab BEx properties>Display-->it shud be Key and not text...
Check this and come back ..
Rgds
SVU123

Search Help in Select - Options for Time field

Hi,
I have a select option which is a time field.
For date field the F4 help is automatically generated.
How to get F4 help for time field.
Regards,
Remo

Selection-Options or normal field - it doesn't matter. There is no system delivered value help for a time field. This is documented in the online help:
There is no automatic F4 help for data element TIMS.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/9f724642314aabe10000000a42189b/frameset.htm
You would have to create your freely programmed value help if you want something like the time value help available in the SAPGUI.

Requirement to maintain select-options for multiple fileds in webdynpro aba

Hello Gurus,
We have a requirement to maintain select-options for multiple fileds in webdynpro abap.
now we are able to create select-options for a single field using wdr_select_options componet usage.
how can we achive this select-options feature for multiple fields.
Could anyone please suggest solutions?
and if possible send me the sample code for this requirement.
Thanks in Advance for your replies.
Regards,
Shyam

Hi,
Nothing different for more fields, same. some declaration changes.
For example code i am using.. in WDDOINIT method.
TYPES:
    fiscal_year TYPE RANGE OF GJAHR,
    S_KUNNR TYPE RANGE OF J_3RS_KUNNR,
    S_VKORG TYPE RANGE OF VKORG_RAN,
    status type PVWTY-RETPA,
    ty_r_date TYPE RANGE OF s_date,
    ty_s_date TYPE LINE OF ty_r_date.
DATA lo_interfacecontroller TYPE REF TO iwci_wdr_select_options .
DATA lo_cmp_usage TYPE REF TO if_wd_component_usage.
lo_cmp_usage =   wd_this->wd_cpuse_cmp_sel_opt( ).
IF lo_cmp_usage->has_active_component( ) IS INITIAL.
lo_cmp_usage->create_component( ).
ENDIF.
* Reference variable used instantiate the select-options component
DATA
    lr_cmp_usage TYPE REF TO if_wd_component_usage.
* Variables used to create the select-options fields and
* define its initial values
DATA:
    lr_field TYPE REF TO data,
    ls_date TYPE ty_s_date.
FIELD-SYMBOLS:
    <fs_field> TYPE ANY,
    <fs_range> TYPE INDEX TABLE.
* Instantiate the select-options component
lr_cmp_usage = wd_this->wd_cpuse_cmp_sel_opt( ).
IF lr_cmp_usage->has_active_component( ) IS INITIAL.
    lr_cmp_usage->create_component( ).
ENDIF.
lo_interfacecontroller =   wd_this->wd_cpifc_cmp_sel_opt( ).
wd_this->m_sel_opt = lo_interfacecontroller->init_selection_screen( ).
data : vhelp type wdy_md_value_help_mode_enum .
* Sets the helper reference
wd_this->m_sel_opt1 = wd_this->wd_cpifc_cmp_sel_opt( ).
wd_this->m_helper = wd_this->m_sel_opt1->init_selection_screen( ).
* Hide the standard select-options components.
wd_this->m_helper->set_global_options(
    i_display_btn_cancel = abap_false
    i_display_btn_check = abap_false
    i_display_btn_reset = abap_false
    i_display_btn_execute = abap_false
lr_field = wd_this->m_helper->create_range_table( `KUNNR` ).
wd_this->m_helper->add_selection_field(
    i_id           = `KUNNR`
    I_DESCRIPTION = 'Customer Code'
*    i_within_block = `BL01`
    it_result      = lr_field ).
FREE lr_field.
lr_field = wd_this->m_helper->create_range_table( `VKORG` ).
wd_this->m_helper->add_selection_field(
    i_id           = `VKORG`
    I_DESCRIPTION = 'Sales Organization'
*    i_within_block = `BL01`
    it_result      = lr_field ).
FREE lr_field.
Go through this..
http://wiki.sdn.sap.com/wiki/display/Snippets/WebDynproABAP-Complexselect-optionscomponent+usages
Cheers,
Kris.

How to make select-option for one inner table

Hi,
Who can teach me to make select-option for a inner table, which let select-option display data from this inner table.
Thanks in advance.

Is this what you are looking for?
report zrich_0002.
data: begin of itab occurs 0,
      matnr type mara-matnr,
      spras type makt-spras,
      maktx type makt-maktx,
      end of itab.
select-options: s_matnr for itab-matnr.
select-options: s_spras for itab-spras.
start-of-selection.
select mara~matnr makt~spras makt~maktx
           into corresponding fields of table itab
                  from mara
                        inner join makt
                           on mara~matnr = makt~matnr
                                    where mara~matnr in s_matnr
                                      and makt~spras in s_spras.
check sy-subrc = 0.
Regards,
Rich Heilman

Select-options for time stamp

Any ideas on which data element to be used for select-options for timestamp on the screen so that a user is able to f4 help too.
i am using data element 'tzntstmps' but i am not getting f4 help for it.

Hello Trivenn
I do not think it makes sense to search for any other timestamp data element which might be part of a search help.
TZNTSTMPS = UTC Time Stamp in Short Form (YYYYMMDDhhmmss)
How could such a search help look like? A calendar control combined with some kind of "time control"?
You may facilitate the entry of time stamps in such a way that if the user enters only a date in the LOW field (e.g. 20080422 without time) you change it AT SELECTION-SCREEN (PBO of your selection screen to 20080422000000).
Correspondingly, you change a date value (e.g. 20080422) at the HIGH field into 20080422235959).
If, however, the user enters already a complete timestamp you do not change anything.
Regards
Uwe

Unicode - "DMBTR" must be a character-type field (data type C,N,D or T)

Greetings Experts!
I am trying to convert legacy code to Unicode for a current ERP6.0 reinstallation and have encountered the syntax error "DMBTR" must be a character-type field (data type C,N,D or T)
The field is part of a structure and the fields attributes are as follows:
COMPONENT = DMBTR
COMPONENT TYPE = DMBTR
DATA TYPE = CURR
LENGTH = 13
DECIMALS = 2
DESCRIPTION = Amount in Local Currency
The code in question is as follows:-
macro Move_Zoned.
Converts a numeric variable to zoned format and moves it to a
target variable.
DEFINE move_zoned.
     &1 - source variable
     &2 - Number of Decimal Places
     &3 - 'To'
     &4 - Target Variable.
write &1 to w_zoned no-grouping decimals &2.
condense w_zoned.
     Remove the Decimal Points.
search w_zoned for '...'.
while sy-subrc = 0.
    move sy-fdpos to w_to_point.
    if w_to_point = 0.
      w_to_point = 1.
    endif.
    compute w_from_point = sy-fdpos + 1.
    concatenate w_zoned+0(w_to_point)
                w_zoned+w_from_point
           into w_zoned.
    search w_zoned for '...'.
endwhile.
shift w_zoned right deleting trailing space.
translate w_zoned using ' 0'.
call function 'Z_TRANSLATE_ZONED_DECIMALS'
    exporting
      i_input              = w_zoned
    importing
      i_output             = w_zoned
    exceptions
      x_invalid_zoned_char = c_invalid_zoned_char
      x_numeric_info_lost = c_numeric_info_lost
      others               = c_other_zoned_error.
     Get the length of the recipient field so we don't truncate the
     numbers....
describe field &4      length w_flength in character mode.
describe field &4      type   w_type.
describe field w_zoned length w_zoned_len in character mode.
if w_zoned_len <= w_flength.
    move w_zoned to &4.
    shift &4 right deleting trailing space.
    translate &4 using ' 0'.
else.
        Get the start position....
        If it's a packed field allow for values up to 6 figures
    compute w_zoned_len = w_zoned_len - w_flength.
    if w_type = 'P'.
      subtract 2 from w_zoned_len.
      clear w_type.
    endif.
    move w_zoned+w_zoned_len &3 &4.
endif.
END-OF-DEFINITION. "Move_zoned
LOOP AT t_single_kunnr.
    move_zoned t_single_kunnr-postamt 2
            to t_single_kunnr-dmbtr.
    DIVIDE t_single_kunnr-dmbtr BY 100.
    MODIFY t_single_kunnr.
ENDLOOP.
Is there a solution to get past this syntax error as I would rather not change the datatype of the field in the structure.
Much Obliged
Elphick.

Type X is not allowed in Unicode. When a field is declared as Type X with Value u201809u2019 or any other value, it can be resolved by using classes.
Before Unicode
                  CONSTANTS: c_hex TYPE x VALUE '09'.
Resolution:
Itu2019s work for any value of x.
First a temporary field of Type c should declare. Following class will convert Type x variable into type c.
Example:
CONSTANTS: c_hex TYPE x VALUE '09'.
DATA: LV_TEMP TYPE STRING.
DATA: LV_TMP TYPE C.
TRY.
CALL METHOD CL_ABAP_CONV_IN_CE=>UCCP
EXPORTING
UCCP   = c_hex
RECEIVING
CHAR   = LV_TMP   .
CATCH CX_SY_CONVERSION_CODEPAGE.
CATCH CX_PARAMETER_INVALID_TYPE.
CATCH CX_SY_CODEPAGE_CONVERTER_INIT.
ENDTRY.
CONCATENATE I_OUTPUT-BKTXT I_OUTPUT-BVORG
I_OUTPUT-BUDAT I_OUTPUT-MESSAGE INTO
SEPARATED BY LV_TMP.
I_BUFFER = LV_TEMP.
CLEAR LV_TEMP.
CLEAR LV_TMP.
OR
Note: It works only for type x value 09.
CLASS cl_abap_char_utilities DEFINITION LOAD.
CONSTANTS: c_hex TYPE c VALUE
                         abap_char_utilities=>HORIZONTAL_TAB.

How to create SELECT-OPTION in search help (search) field

Hi All,
We have created a search help using Help view as selection method.
But, we want to have a SELECT-OPTION for one of the search parameters. How do we implement the same ?
Regards,
Ashish

hi
try this
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
    TABNAME                   = 'YRJEMPDETAIL'
    FIELDNAME                 = 'L_NAME_LOW'
*   SEARCHHELP                = ' '
*   SHLPPARAM                 = ' '
   DYNPPROG                  = 'SAPMZRJ_HELP'
   DYNPNR                    = '9000'
   DYNPROFIELD               = 'LAST_NAME_LOW'
*   STEPL                     = 0
*   VALUE                     = ' '
*   MULTIPLE_CHOICE           = ' '
*   DISPLAY                   = ' '
*   SUPPRESS_RECORDLIST       = ' '
*   CALLBACK_PROGRAM          = ' '
*   CALLBACK_FORM             = ' '
*   SELECTION_SCREEN          = ' '
* IMPORTING
*   USER_RESET                =
* TABLES
*   RETURN_TAB                =
* EXCEPTIONS
*   FIELD_NOT_FOUND           = 1
*   NO_HELP_FOR_FIELD         = 2
*   INCONSISTENT_HELP         = 3
*   NO_VALUES_FOUND           = 4
*   OTHERS                    = 5
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
    TABNAME                   = 'YRJEMPDETAIL'
    FIELDNAME                 = 'L_NAME_HIGH'
*   SEARCHHELP                = ' '
*   SHLPPARAM                 = ' '
   DYNPPROG                  = 'SAPMZRJ_HELP'
   DYNPNR                    = '9000'
   DYNPROFIELD               = 'LAST_NAME_HIGH'
*   STEPL                     = 0
*   VALUE                     = ' '
*   MULTIPLE_CHOICE           = ' '
*   DISPLAY                   = ' '
*   SUPPRESS_RECORDLIST       = ' '
*   CALLBACK_PROGRAM          = ' '
*   CALLBACK_FORM             = ' '
*   SELECTION_SCREEN          = ' '
* IMPORTING
*   USER_RESET                =
* TABLES
*   RETURN_TAB                =
* EXCEPTIONS
*   FIELD_NOT_FOUND           = 1
*   NO_HELP_FOR_FIELD         = 2
*   INCONSISTENT_HELP         = 3
*   NO_VALUES_FOUND           = 4
*   OTHERS                    = 5
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
hope this helps
Regards
Ritesh J

Select option for selection valid and invalid data.

Hi All,
Any one pleas help in validating following case :-
In the selection screen there is a select option for equipment number like EQUI-EQUNR
if any user will give wrong equipment no. It will generate an error message from the range of equipment no.
and put it to an internal table it error.
and if any value in between the select option(equipment no) is correct then that value I need to proceed for some other logic.
Iu2019d appreciate if some one help me in generation code for the above case or logic.
Thanks

Hi,
Use FM 'RS_REFRESH_FROM_SELECTOPTIONS'
DATA: RSPAR TYPE STANDARD TABLE OF RSPARAMS.
      REFRESH RSPAR.
      CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
          EXPORTING
            CURR_REPORT           = 'prog name'
    IMPORTING
      SP                    =
          TABLES
            SELECTION_TABLE       = RSPAR
         EXCEPTIONS
           NOT_FOUND             = 1
           NO_REPORT             = 2
           OTHERS                = 3.
      IF SY-SUBRC <> 0.
   MESSAGE I000.
      ENDIF.
In table parameter you ll get the all entries entered .
Check out the values with respective tables.If value is not correct tk it into internal table
else proceed ahead. You can Remove incorrect entries this way.
regards,
ajit.

Select option for a character type field

Similar Messages

Maybe you are looking for