Select option in Dialog prog

Hi,
I'm developing a dialog programming. 1st screen is the selection screen, i need to code the input for Parameter -> Material number , Select-option -> Plant. Problem hits on select option Plant.
If we code via normal type 1 executable program, i just need code like -> Select-options: S_PLANT for mara-werks. Since right now im in dialog programming then i need to code my own LOW and HIGH value. I have done that. But i need to code in the Multiple selection/Extension button that next to HIGH.
Do u guys know is there any FM that helping to create Multiple selection/Extension button? Like standard once click on it, it contains single value, ranges, exclude single value, exclude ranges...
Please comment.

Hi,
1. Create the subscreen using the selection screen
2. Create the subscreen area in the Dialog program
3. Call this subscreen created in point 1 in the subscreen area of dialog programing.
selection-screen : begin of screen 0050 as subscreen.
select-option : s_pernr for pa0000-pernr.
selection-screen : end of screen 0050.
start-of-selection
call screen 100.
in PBO
call subscreen <subscreen area>including sy-repid '0050'.
in PAI
call subscreen <subscreen area> .

Similar Messages

Select option in Dialog program screen

Hi friends,
do we have any way to get a select option displayed in dialog programming ?
or
create a screen field with the properties of a select option in dialog screen ?
or
any standard function module to support this scenario ?
Thanks and Regards
Sakthi.

Hi,
i don't know you checked it or not, but i am able to do it, i send the screen shot also to you check it..
it is possible,with some coding also check it once...
REPORT ZTEST_SCREEN .
DATA : BEGIN OF IT_DYNPFIELDS OCCURS 3.
 INCLUDE STRUCTURE DYNPREAD.
DATA : END OF IT_DYNPFIELDS.
DATA: TEST(10) TYPE C.
RANGES: R_UNAME FOR SY-UNAME.
DATA: V_USERNAME LIKE SY-UNAME.
DATA : V_PROG LIKE D020S-PROG VALUE 'ZTEST_SCREEN',
 V_DNUM LIKE D020S-DNUM VALUE '0100'.
CALL SCREEN 100.
*& Module STATUS_0100 OUTPUT
* text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'TEST'.
* SET TITLEBAR 'xxx'.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
* text
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
 WHEN 'BACK'.
 LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module GET_CURSOR_USERNAME INPUT
* text
MODULE GET_CURSOR_USERNAME INPUT.
REFRESH IT_DYNPFIELDS.
CLEAR IT_DYNPFIELDS.
MOVE 'V_USERNAME' TO IT_DYNPFIELDS-FIELDNAME.
APPEND IT_DYNPFIELDS.
CLEAR IT_DYNPFIELDS.
CALL FUNCTION 'DYNP_VALUES_READ'
 EXPORTING
 DYNAME = V_PROG
 DYNUMB = V_DNUM
 TRANSLATE_TO_UPPER = 'X'
 TABLES
 DYNPFIELDS = IT_DYNPFIELDS
 EXCEPTIONS
 INVALID_ABAPWORKAREA = 1
 INVALID_DYNPROFIELD = 2
 INVALID_DYNPRONAME = 3
 INVALID_DYNPRONUMMER = 4
 INVALID_REQUEST = 5
 NO_FIELDDESCRIPTION = 6
 INVALID_PARAMETER = 7
 UNDEFIND_ERROR = 8
 DOUBLE_CONVERSION = 9
 STEPL_NOT_FOUND = 10
 OTHERS = 11.
IF SY-SUBRC = 0.
 READ TABLE IT_DYNPFIELDS WITH KEY FIELDNAME = 'V_USERNAME'.
 IF SY-SUBRC = 0.
 V_USERNAME = IT_DYNPFIELDS-FIELDVALUE.
 ENDIF.
ENDIF.
PERFORM GET_MULTIPLE.
ENDMODULE. " GET_CURSOR_USERNAME INPUT
*& Form GET_MULTIPLE
* text
* --> p1 text
* <-- p2 text
FORM GET_MULTIPLE .
* Dynamically holding Field name
FIELD-SYMBOLS: <FST> TYPE STANDARD TABLE.
IF R_UNAME[] IS INITIAL.
 IF NOT V_USERNAME IS INITIAL.
 R_UNAME-SIGN = 'I'.
 R_UNAME-OPTION = 'EQ'.
 R_UNAME-LOW = V_USERNAME.
 APPEND R_UNAME.
 CLEAR R_UNAME.
 ENDIF.
ENDIF.
ASSIGN R_UNAME[] TO <FST>.
CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
 EXPORTING
 TITLE = 'Select Multiple Value'(059)
 TEXT = 'Finish Group'(058)
 SIGNED = 'X'
 LOWER_CASE = ' '
 NO_INTERVAL_CHECK = 'X'
 JUST_DISPLAY = ' '
 JUST_INCL = 'X'
 TABLES
 RANGE = <FST>
 EXCEPTIONS
 NO_RANGE_TAB = 1
 CANCELLED = 2
 INTERNAL_ERROR = 3
 OTHERS = 4.
IF SY-SUBRC = 0.
 READ TABLE R_UNAME INDEX 1.
 IF SY-SUBRC = 0.
 V_USERNAME = R_UNAME-LOW.
 ENDIF.
ENDIF.
ENDFORM. " GET_MULTIPLE
Flow loogic....
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100.
PROCESS ON VALUE-REQUEST.
*- To capture the cursor and for f4
FIELD V_USERNAME MODULE GET_CURSOR_USERNAME.
in screen i have one field v_username
for that field do this
double click on field which you want to make it as select option, it will display the attributes screen, in that click on program attributes button , now go to poss. entries in the dropdown choose 1 show at selection.
Regards
vijay

Select-Option in Dialog programming

Hi Experts,
Can we use select-options in Dialog programming?
If yes, Please help me, how to do that?
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Jun 12, 2008 12:27 PM

Hi Asrar,
Definitely you can use select-options in dialog programming.
You can do this using Subscreen.
define this scubscreen in top include.
selection-screen : begin of screen 100 as subscreen.
select-option : kunnr for kna1-kunnr.
selection-screen : end of screen 100.
in screen 200 where this selection screen appears, create a subscreen area 'SSA'.
Process on output. "200 screen.
call subscreen SSA including sy-repid '100'.
other modules
Process on input. "200 screen.
call subscreen SSA.
other modules
now you can access kunnr like other screen 200 objects.
<REMOVED BY MODERATOR>
Regards
Megha
Edited by: Alvaro Tejada Galindo on Jun 12, 2008 12:27 PM

Select-options in Dialog Programming

Hi,
I am designing a custom dialog programming screen.
I want to create a filed on thescreen which can allow the range of values to be entered like select-options in a report.
How do I create a field which can accept range of values in dialog programming?
Thanks,
Ashok.

Hi,
In your selection screen program, Use Export command
Export r_Purchase_Order To Memory Id 'PO'.
             Export r_Po_Item        To Memory Id 'POITEM'.
             Export r_Plant          To Memory Id 'PLANT'.
             Export r_Vendor         To Memory Id 'VENDOR'.
             Export r_Material       To Memory Id 'MATNR'.
             Export r_Batch          To Memory Id 'BATCH'.
             Export r_Arrival_Date   To Memory Id 'ADATE'.
             Export r_Arrival_Time   To Memory Id 'ATIME'.
             Export r_Delivery_No    To Memory Id 'DEL'.
             Export r_Reference_No   To Memory Id 'REF'.
             Export r_User           To Memory Id 'USER'.
             Export t_Display_Data   To Memory Id 'DISPDAT'.
In your Module pool program, Use Import Command
    When c_Ok_0100_Execute.
               IMPORT r_Purchase_Order From Memory Id 'PO'.
               IMPORT r_Po_Item        From Memory Id 'POITEM'.
               Import r_Plant          From Memory Id 'PLANT'.
               Import r_Vendor         From Memory Id 'VENDOR'.
               Import r_Material       From Memory Id 'MATNR'.
               Import r_Batch          From Memory Id 'BATCH'.
               Import r_Arrival_Date   From Memory Id 'ADATE'.
               Import r_Arrival_Time   From Memory Id 'ATIME'.
               Import r_Delivery_No    From Memory Id 'DEL'.
               Import r_Reference_No   From Memory Id 'REF'.
               Import r_User           From Memory Id 'USER'.
               Import t_Display_Data   From Memory Id 'DISPDAT'.
Thanks

Select option in dialog, in a table control

Hi Friends,
My need is creating dynamic select options in a table control in dialog screen. How can I do my desire?
Thanks.

Hi,
You can make use of
FREE_SELECTIONS_INIT
and
FREE_SELECTIONS_DIALOG
Please see the documentation
a®s

Select-Options in dialog program

Hi there,
I'm using a selection-screen in a dialog program, I declared it in the TOP.
Selection-screens
SELECTION-SCREEN BEGIN OF SCREEN 101 AS SUBSCREEN.
parameters: p_lifnr type lfa1-lifnr obligatory ,
p_werks type t001w-werks obligatory .
SELECT-OPTIONS:
s_licha FOR zbrtconsig-licha.
SELECTION-SCREEN END OF SCREEN 101.
I have to use the event at selection-screen on value-request for s_licha-low, and I need the values from the fields p_lifnr and p_werks. the problem is:
If I only fill the fields p_lifnr, p_werks and click on F4 for s_licha, the values of p_lifnr and p_werks are not updated, they are empty. Only wether I do an Enter this fields is updated.
Thanks,
Alexandre Nogueira

Hi,
i am not clear about your problem, please expalin it clearly.
use FM : DYNP_VALUES_UPDATE to update screen fields.
use FM : DYNP_VALUES_READ to read screen fields.
use SET /GET Parameter id's to set parameters
this FM will update the screen fields before to PBO event.
check this link for sample code :
Re: Issue Related to Module pool
Regards
Appana

Passing selection-options to standard PROG

Hi All,
     i want to submit a standard program into zprogram , in standard program there are 3 select-options . i need to pass zselect-options into these 3 select-options in standard program.
if u have any code please pass to me.
please help me.
Many Thanks
Naren

check this
Syntax Diagram
SUBMIT
Basic forms:
1. SUBMIT rep.
2. SUBMIT (name).
Extras:
1. ... LINE-SIZE col
2. ... LINE-COUNT line
3. ... TO SAP-SPOOL List output to the SAP spool database
4. ... USING SELECTION-SCREEN scr
5. ... VIA SELECTION-SCREEN
6. ... AND RETURN
7. ... EXPORTING LIST TO MEMORY
8. ... USER user VIA JOB job NUMBER n
9. ...Various additions for passing parameters to rep
10. ... USING SELECTION-SETS OF PROGRAM prog
Effect
Calls report rep.
The system leaves the active program and starts the new report rep. In basic form 2, you can specify the name of the report in the field name. You must specify the name in uppercase, otherwise a runtime error occurs.
Note
You can only start programs with type '1' using SUBMIT. If the program has a different type, the system triggers a runtime error.
Please consult Data Area and Modularization Unit Organization documentation as well.
Addition 1
... LINE-SIZE col
Effect
The list generated by the report has the line width col.
Addition 2
... LINE-COUNT line
Effect
The list generated by the report has line lines per page.
Addition 4
... USING SELECTION-SCREEN scr
Effect
When you execute the report, the system uses the selection screen number that you specify in the scr field. This must be a selection screen defined using the SELECT-OPTIONS, PARAMETERS and SELECTION-SCREEN statements.If you omit the addition, the system uses the standard selection screen 1000.
This addition allows you to start the same report in different situations, using a different selection screen each time.
Notes
The addition VIA SELECTION SCREEN determines whether the report is processed in the foreground or the background.
What happens if the required screen does not exist or is not a selection screen?
Screen 1000:
If you want to use the standard selection screen (... USING SELECTION-SCREEN 1000 or do not specify a ... USING SELECTION-SCREEN) addition, the system does not process a selection screen.
Other selection screens:
The system triggers a runtime error.
Addition 5
... VIA SELECTION-SCREEN
Effect
The selection screen is displayed. In this case, the selection screen is displayed again after the report list has been displayed. The values entered by the user remain displayed.
Addition 6
... AND RETURN
Effect
Returns to the calling transaction or program after the called program has been executed. SUBMIT ... AND RETURN creates a new internal session.
Addition 7
... EXPORTING LIST TO MEMORY
Effect
Does not display the output list of the called report, but saves it in ABAP memory and leaves the called report immediately. Since the calling program can read the list from memory and process it further, you need to use the addition ... AND RETURN . Also, since the called report cannot be requested for printing, the addition ... TO SAP-SPOOL is not allowed here. In addition, you must not assign a function code to the ENTER key in the current GUI status. The saved list is read from the SAP memory using the function module 'LIST_FROM_MEMORY' and can then be saved to the database using EXPORT, for example. You can process this list further with the function modules 'WRITE_LIST', 'DISPLAY_LIST' ... of the function group "SLST".
Addition 8
... USER user VIA JOB job NUMBER n
Effect
Schedules the specified report in the job specified by the job name job and the job number n. The job runs under the user name user and you can omit the addition USER user. The assignment of the job number occurs via the function module JOB_OPEN (see also the documentation for the function modules JOB_CLOSE and JOB_SUBMIT). This addition can only be used with the addition ...AND RETURN.
Note
When scheduling a report with the SUBMIT ... VIA JOB job NUMBER n statement, you should always use the addition ...TO SAP-SPOOL to pass print and/or archive parameters. Otherwise, default values are used to generate the list and this disturbs operations in a production environment.
SY-SUBRC = 0:
Job scheduled successfully
SY-SUBRC = 4:
Job scheduling terminated by user
SY-SUBRC = 8:
Error in job scheduling (JOB_SUBMIT)
SY-SUBRC = 12:
Error in internal number assignment
Addition 10
... USING SELECTION-SETS OF PROGRAM prog
Effect
Uses variants of the program prog when executing the program rep.
Note
Important
The programs prog and rep must have the same SELECT-OPTIONS and PARAMETERs. Otherwise, variants of the program prog may be destroyed.
Note
When using this addition, the specified variant vari of the program prog is taken in USING SELECTION-SET vari. On the other hand, all variant-related actions on the selection screen of rep (Get, Save as variant, Display, Delete) refer to the variants of prog.
Example
SUBMIT REPORT01
       VIA SELECTION-SCREEN
       USING SELECTION-SET 'VARIANT1'
       USING SELECTION-SETS OF PROGRAM 'REPORT00'
       AND RETURN.
Effect
Executes the program REPORT01 with the variant VARIANT1 of the program REPORT00.
Exceptions
Non-Catchable Exceptions
Cause: The specified program was not found.
Runtime Error: LOAD_PROGRAM_NOT_FOUND
Cause: Invalid value passed to a selection with SIGN.
Runtime Error: SUBMIT_WRONG_SIGN
Cause: The specified program is not a report.
Runtime Error: SUBMIT_WRONG_TYPE
Cause: More than one value passed to a report parameter.
Runtime Error: SUBMIT_IMPORT_ONLY_PARAMETER
Cause: Table passed to a selection with WITH sel IN itab that has an unexpected structure.
Runtime Error: SUBMIT_IN_ITAB_ILL_STRUCTURE
Additional help
Starting Executable Programs (Reports)
Regards
Prabhu

Select options in dialog screen

Hi all,
I have used this logic in my program (ZSDIC001),
selection-screen begin of screen 1010 as subscreen.
selection-screen begin of block b1 with frame title text-001.
parameters: p_rad1 radiobutton group grp1 default 'X',
            p_rad2 radiobutton group grp1,
            p_rad3 radiobutton group grp1.
select-options: s_matnr for mara-matnr,
                s_matkl for mara-matkl,
                s_mtart for mara-mtart.
selection-screen end of block b1.
selection-screen end of screen 1010.
start-of-selection.
call screen 100.
*&      Module STATUS_0100 OUTPUT
module status_0100 output.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
endmodule.
*&      Module USER_COMMAND_0100 INPUT
module user_command_0100 input.
endmodule.
create   screen 100 and create a subscreen area called "subscreen_1010"
Screen Flow Logic follows
*process before output.
module status_0100.
call subscreen subscreen_1010 including sy-repid '1010'.
*process after input.
call subscreen subscreen_1010 .
module user_command_0100.
But i get this error,
Error when generating the selection screen "1010" of report "ZSDIC001".
Can anyone help me out to solve this problem.
Thanks,
Rajesh.

I've copied your code and it generated fine without any error.
Possibly your subscreen container is to small.
Regards
Tobias

How to get calender in f4 help for select options in module pool (URGENT)

Hi All,
how to get calender in f4 help for select options in module pool
Please help .
Thanx in advance,
amruta

Hi Amruta,
First of all, you can not create select-options directly in module pool.
For creating select-option is dialog prog follow these steps:
1. create your selection screen model as subscreen by:
SELECTION-SCREEN BEGIN OF SCREEN 2000 AS SUBSCREEN.
PARAMETRS: P_MATNR LIKE MARA-MATNR.
SELECT-OPTIONS: S_BISMAT FOR MARA-BISMAT.
SELECTION-SCREEN END OF SCREEN 2000.
2. create a screen ( example 100 ) in your module-pool dedicated for selection-screen. on this screen layout sketch a sub-screen name like subscree_2000.
3. write this bit of code in PBO and PAI of the screen 100;
CALL SUBSCREEN SUBSCREEN_2000.
4. include this code in PBO:
INCLUDING SY-REPID '2000'
6. write user_command of PAI, call screen which is going to executable after selection-screen.
5. create a transcation for this dialog module pool with screen 100.
6. execute this transaction and you can see it's behaving like cool with select-options.
After that in [bprocee on value-request], use F4_DATE for both from and to option field.
Hope it will solve the problem.
Regards
Krishnendu

Select-option field in dialog programming

hi guys,
i need to declare field matnr as select-option range in dialog programming..how can i code it in the module program?

This questions has been answered many times (even in february)
- search sdn wiki (2 commented samples at [SELECT-OPTIONS on Dialog programming screen|http://wiki.sdn.sap.com/wiki/display/ABAP/SELECT-OPTIONSonDialogprogrammingscreen] and [Select-Options in Module Pool Programming|http://wiki.sdn.sap.com/wiki/display/ABAP/Select-OptionsinModulePoolProgramming])
- search abap online help ([SELECTION-SCREEN - AS SUBSCREEN |http://help.sap.com/abapdocu_70/en/ABAPSELECTION-SCREEN_SUBSCREEN.htm] with sample at [Selection Screens as Subscreens |http://help.sap.com/abapdocu_70/en/ABENSEL_SCREEN_SUBSCREEN_ABEXA.htm])
Regards,
Raymond

Select-option on dynpro

Hi!
How can I put a select-option like "object" into a dynpro which is not a selection screen.
Is there any possibility to do this?
THX:
Peter

Hi,
select options in screen check this code..
REPORT ZTEST_SCREEN .
DATA : BEGIN OF IT_DYNPFIELDS OCCURS 3.
 INCLUDE STRUCTURE DYNPREAD.
DATA : END OF IT_DYNPFIELDS.
DATA: TEST(10) TYPE C.
RANGES: R_UNAME FOR SY-UNAME.
DATA: V_USERNAME LIKE SY-UNAME.
DATA : V_PROG LIKE D020S-PROG VALUE 'ZTEST_SCREEN',
 V_DNUM LIKE D020S-DNUM VALUE '0100'.
CALL SCREEN 100.
*& Module STATUS_0100 OUTPUT
* text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'TEST'.
* SET TITLEBAR 'xxx'.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
* text
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
 WHEN 'BACK'.
 LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module GET_CURSOR_USERNAME INPUT
* text
MODULE GET_CURSOR_USERNAME INPUT.
REFRESH IT_DYNPFIELDS.
CLEAR IT_DYNPFIELDS.
MOVE 'V_USERNAME' TO IT_DYNPFIELDS-FIELDNAME.
APPEND IT_DYNPFIELDS.
CLEAR IT_DYNPFIELDS.
CALL FUNCTION 'DYNP_VALUES_READ'
 EXPORTING
 DYNAME = V_PROG
 DYNUMB = V_DNUM
 TRANSLATE_TO_UPPER = 'X'
 TABLES
 DYNPFIELDS = IT_DYNPFIELDS
 EXCEPTIONS
 INVALID_ABAPWORKAREA = 1
 INVALID_DYNPROFIELD = 2
 INVALID_DYNPRONAME = 3
 INVALID_DYNPRONUMMER = 4
 INVALID_REQUEST = 5
 NO_FIELDDESCRIPTION = 6
 INVALID_PARAMETER = 7
 UNDEFIND_ERROR = 8
 DOUBLE_CONVERSION = 9
 STEPL_NOT_FOUND = 10
 OTHERS = 11.
IF SY-SUBRC = 0.
 READ TABLE IT_DYNPFIELDS WITH KEY FIELDNAME = 'V_USERNAME'.
 IF SY-SUBRC = 0.
 V_USERNAME = IT_DYNPFIELDS-FIELDVALUE.
 ENDIF.
ENDIF.
PERFORM GET_MULTIPLE.
ENDMODULE. " GET_CURSOR_USERNAME INPUT
*& Form GET_MULTIPLE
* text
* --> p1 text
* <-- p2 text
FORM GET_MULTIPLE .
* Dynamically holding Field name
FIELD-SYMBOLS: <FST> TYPE STANDARD TABLE.
IF R_UNAME[] IS INITIAL.
 IF NOT V_USERNAME IS INITIAL.
 R_UNAME-SIGN = 'I'.
 R_UNAME-OPTION = 'EQ'.
 R_UNAME-LOW = V_USERNAME.
 APPEND R_UNAME.
 CLEAR R_UNAME.
 ENDIF.
ENDIF.
ASSIGN R_UNAME[] TO <FST>.
CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
 EXPORTING
 TITLE = 'Select Multiple Value'(059)
 TEXT = 'Finish Group'(058)
 SIGNED = 'X'
 LOWER_CASE = ' '
 NO_INTERVAL_CHECK = 'X'
 JUST_DISPLAY = ' '
 JUST_INCL = 'X'
 TABLES
 RANGE = <FST>
 EXCEPTIONS
 NO_RANGE_TAB = 1
 CANCELLED = 2
 INTERNAL_ERROR = 3
 OTHERS = 4.
IF SY-SUBRC = 0.
 READ TABLE R_UNAME INDEX 1.
 IF SY-SUBRC = 0.
 V_USERNAME = R_UNAME-LOW.
 ENDIF.
ENDIF.
ENDFORM. " GET_MULTIPLE
Check this thread...
Select option in Dialog program screen
Regards
Vijay

Multiple select option in the screen painter

Hi all,
I want to give multiple select option for a particular field in the screen painter.
how to provide it.
Nitin

Hi,
Refer to this link..[Select-Option in Dialog programming |Re: Select-Option in Dialog programming]
[How to make select option in module pool |how to make select option in module pool]

How to declare and work with select-option in screen painter?

hello there,
can anybody plz suggest me ,how to declare and work with select-option in screen painter?
neon

Hi Blue,
Please check these threads which will help you a lot..
module pool programming " to add selection-option on screen"
Re: Select option in Dialog program screen
Re: SELECT-OPTIONS in Screen
Good luck
Narin

Slect-options in Dialog program

Hi,
How to bring Select-options parameter in dialog program ? i.e
I want to give a parameter like select-options in dialog program .
Thanks in Advance.
Regards
Ranjith

Hi
Treat Dialog pgm also as report---
u can declare as below in TOP include
SELECTION-SCREEN BEGIN OF SCREEN 030 AS WINDOW TITLE text-t08.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF BLOCK s1
                          WITH FRAME TITLE text-t08.
PARAMETERS:
ra_own          RADIOBUTTON GROUP rad3,
ra_all          RADIOBUTTON GROUP rad3.
SELECTION-SCREEN END OF BLOCK s1.
SELECTION-SCREEN END   OF SCREEN 030.

Regarding select option in a module pool prog .

hello .. i need some help regarding select options in a module pool program .. i hav tried putting a select options in a module pool prog but i am not able 2 ... can any one tel me why select options r not aloowed in a module pool prog ?? and i read that we hav 2 use ranges 2 fulfil the needs of the select options . is there any way i cal get all the functionality of select options ( eg including , excludig , equal to , not equal to , .... .) using a range ??

Hi
Select-options won't work if you declare the program as Module POOL.
if you wants to use select-options like utility in module pool programming
use ranges
declare and develop ranges and use that in select statement where condition.
ranges: r_vbeln for vbak-vbeln.
r_vbeln-low = '0018900678'.
r_vbeln-sign = 'I'.
r_vbeln-option = 'EQ'.
append r_vbeln.
r_vbeln-low = '0018900456'.
r_vbeln-sign = 'I'.
r_vbeln-option = 'EQ'.
append r_vbeln.
reward if useful
regards
Anji

Select option in Dialog prog

Similar Messages

Maybe you are looking for