Select options numeric value with asterisk in field screen.

Hi Guys
I searched this solution in SDN and SAP HELP but I found the solution, so I created this post.
I have a select options:
SELECT-OPTIONS: s_asnum FOR asmd-asnum
If I insert value 3000111 , then my internal table show 000000000003000111 (ok its wright)
If I insert value 30001*1 , then my internal table show 30001*1 (its my problem , because i NEED 0000000000030001*1 to my select work)
How can I change my select option 30001*1 to 0000000000030001*1.
Thanks for help.

Hi Ronaldo,
can't you ask your user to fill the zeros? or search by *30001*1?
try CONVERSION_EXIT_ALPHA_RANGE_I
If it doesn't work you'll have to fill left zeros yourself in code.
regards,
Edgar

Similar Messages

Dynamic variant for select option High value

Hi ,
Please help me in creating dynamic variable for a select option date field high value.
II tried the following method:
1. Enter the values in the selection screen
2. Save the variant using the SAVE button
3. In the next screen for the date variable select the 'Selection variable' checkbox (L) and click on the button 'Selection variable' in the toolbar.
4. Now you will see this variable in the next screen with 3 types of buttons. Click on the middle button (i.e. D - Dynamic date calculation).
5. Click on the down arrow button and select the option 'Current Date'.
5. Save the variant.
But it is saving the date value in Field LOW of select option( From value).
I need it in TO field( High value).
Please help.
regards,
Sheeba

Hi Sheeba
we can do it other way .. Select the same steps as you have done but after the assigning the value current date to low ..click on the selection option push button at the application bar and choose the 'less than or equal to' option to your select option value and try the same ....
I guess this would throw you same results as that of the value in the high value button
Cheers,
Jacks.

Populate SELECT-OPTIONS default value using CALL FUNCTION

Hi Experts,
I would like to populate SELECT-OPTIONS s_currm default with value in w_currm, however, it doesn't seem to work. Can you please advise what the correct syntax is.
Note that CALL FUNCTION 'GET_CURRENT_YEAR' is working correctly and populating w_currm (as I can use it in a SQL SELECT statement), however, it does not seem to work for SELECT-OPTIONS s_currm.
Thank you for your time.
Code snippet is as a follows:
REPORT Z_DOWNLOAD_BSIS_TEST.
*Data Declaration
DATA: w_currm TYPE BSIS-MONAT.
*Define current fiscal month
CALL FUNCTION 'GET_CURRENT_YEAR'
EXPORTING
    BUKRS         = 'X999'     " Company Code
    DATE          = SY-DATUM   " Date to find fiscal year for
IMPORTING
    CURRM         = w_currm.   " Current Fiscal Month
SELECT-OPTIONS s_currm FOR w_currm
               DEFAULT w_currm. " The default value is NOT being populated (appears blank)

Hi Venkat.O,
Thank you for your clear response. I have implemented your suggestion and it works, however, I now have a new problem.
Each time the report is executed or the "multiple selection" button is clicked the selection fields are populated once again with the default (low) values.
For example, when report is first opened the s_curry field displays '2010'. Clicking "multiple selection" results in another '2010' being populated. After executing the report the selection screen is populated again with '2010' (so we now have '2010' listed 3 times in the s_curry field).
How do I prevent the default values from repeating?
REPORT Z_DOWNLOAD_BSIS_TEST
*Data Declaration
DATA: w_currm TYPE BSIS-MONAT,
       w_curry TYPE BSIS-GJAHR,
       w_prevm TYPE BSIS-MONAT,
       w_prevy TYPE BSIS-GJAHR.
SELECTION-SCREEN BEGIN OF BLOCK b11 WITH FRAME TITLE text-001 .
*Parameters to enter the path
PARAMETERS: FILENAME(128) OBLIGATORY DEFAULT '/usr/sap/tmp/TEST.txt'
                         LOWER CASE.
SELECT-OPTIONS: s_curry FOR w_curry,
                s_currm FOR w_currm.
SELECTION-SCREEN END OF BLOCK b11.
AT SELECTION-SCREEN OUTPUT.
*Define current/previous financial periods
CALL FUNCTION 'GET_CURRENT_YEAR'
EXPORTING
    BUKRS         = 'X999'     " Company Code
    DATE          = SY-DATUM   " Date to find fiscal year for
IMPORTING
    CURRM         = w_currm    " Current Fiscal Month
    CURRY         = w_curry    " Current Fiscal Year
    PREVM         = w_prevm    " Previous Fiscal Month
    PREVY         = w_prevy.   " Previous Fiscal Year
    s_curry-low = w_curry.
    s_curry-option = 'EQ'.
    s_curry-sign = 'I'.
    APPEND s_curry.
    CLEAR s_curry.
    s_currm-low = w_currm.
    s_currm-option = 'EQ'.
    s_currm-sign = 'I'.
    APPEND s_currm.
    CLEAR s_currm.

How to restrict the user to enter only numeric values in a input field

How to restrict the user to enter only numeric values in a input field.
For example,
i have an input field in that i would like to enter
only numeric values. no special characters,alphabets .
reply ASAP

Hi Venuthurupalli,
As valery has said once you select the value to be of type integer,once you perform an action it will be validated and error message that non numeric characters are there will be shown. If you want to set additional constraints like max value, min value etc you can use simple types for it.
On the project structure on left hand side under local dictionary ->datatypes->simple types create a simple type of type integer
The attribute which you are binding to value property ;make its type as simple type which you made
Hope this helps you
Regards
Rohit

Pass select option and parameter with submit

Hello,
I have two programs and what i have to do is to use the selection screen information from program A and submit it to program B so that this second program will generate a report with this information.
After program B is executed it creates some files in a server, which i will have to use later in program A. I cannot modify the program B since its not part of the requirement.
But the thing is that i am having problems when submiting a select option and a parameter together.
It would be really useful if someone could give some examples of this.
Example of what i want to do:
SUBMIT PROGRAM_B
WITH S_MATNR EQ S_MATNR ->pass all the values from a select option.
WITH P_WERKS EQ P_WERKS ->pass a single value from a parameter.
AND RETURN
Regards,
Roberto

Hi,
Try this for select-options:
SUBMIT PROGRAM_B
WITH S_MATNR *IN* S_MATNR ->pass all the values from a select option.
WITH P_WERKS EQ P_WERKS ->pass a single value from a parameter.
AND RETURN
Hope it helps.
Regards,
Gilberto Li
Edited by: Gilberto Li on Feb 2, 2009 10:24 PM
Edited by: Gilberto Li on Feb 2, 2009 10:33 PM
Edited by: Gilberto Li on Feb 2, 2009 10:33 PM

Check select-options parametr value

hi,
i want to check if select-option parameter value is '002' then execute some code, how can i do that .
thanks in advance,
ramakrishna buddala.
Moderator Message: Not enough search done. Thread locked.
Edited by: Suhas Saha on Oct 20, 2011 3:15 PM

Hi
Perform the validation in AT Selection-screen on field event.If validation is not succes then give error message.
AT selection-screen on <Fieldname>.
if fieldname-low <> '002'.
message '<Message Text>' type 'E'.
endif.
Regards.
Raghu.

In BI how to filter the selection options based on inputs on top field

Hi Friends,
In BI, How to filter the selection options based on inputs on top field.
The system should automatically filter the lower level drop downs based on the selection of a higher level.
For e.g. :
If a user selects a Country then the States drop down should only display the State's belongs to the Country. Similarly when a State is selected, the District drop down should display only those District's belongs to the State.
Thanks in Advance.
Regards
Jayaram M

Hi Anil,
Thanks for reply but I couldn't use Compounding Characteristic here. Need some other solution.
Regards
Jayaram M

Select-option or parameter with display mode

hai experts,
i need to give select-option or parameter with display mode in selection-screen.
my requirement is.......
to give last print out time in selection screen with display mode mean user cant able to change the time......
reward avail for hope ful answer.....
thanks in advance...
regards,
jai.m

Hi jaya,
write the following code.
parameters: p1 type c.
initialization.
p1 = 'c'.
at selection-screeen output.
loop at screen.
       if screen-name = 'P1'.
          screen-input = '0'.
          modify screen.
       endif.
endloop.
regards,
Santosh Thorat

Select options default value and execute

Hello,
I managed to fill my select options default value. But what I also want is that the user does not have to press the execute button when the screen is shown at the first time. I would like to show the result screen for these default values at the same time the screen is shown first.
I tried in WDDOINIT:
data: l_ref_interfacecontroller type ref to iwci_wdr_select_options .
l_ref_interfacecontroller =   wd_this->wd_cpifc_select_options( ).
l_ref_interfacecontroller->execute(
but this coding only works when the select-option screen was shown the first time.
Any ideas?
regards
stefan

Hello Sascha,
I checked that WD_THIS->MR_SELOPT is filled.
My coding in WDDOINIT is:
*--- Instantiate select options component
lr_usage = wd_this->wd_cpuse_usage_so( ).
if lr_usage->has_active_component( ) is initial.
    lr_usage->create_component( ).
endif.
*--- Initialize selection screen
lr_if_controller = wd_this->wd_cpifc_usage_so( ).
wd_this->mr_selopt = lr_if_controller->init_selection_screen( ).
*--- Configure layout options
wd_this->mr_selopt->set_global_options(
                             i_display_btn_cancel = abap_false
                             i_display_btn_check   = abap_false
                             i_display_btn_reset   = abap_true
                             i_display_btn_execute = abap_true ).
*--- Create range tables
lt_range = wd_this->mr_selopt->create_range_table(
                                                   i_typename = 'DATUM' ).
*Range vorbelegen
wa_dats = sy-datum - 30.
wa_range_datum-sign = 'I'.
wa_range_datum-option = 'BT'.
wa_range_datum-low = wa_dats.
wa_range_datum-high = sy-datum.
assign lt_range->* to <fs_rangetable>.
create data r_headerline like line of <fs_rangetable>.
assign r_headerline->* to <fs_range>.
move-corresponding wa_range_datum to <fs_range>.
append <fs_range> to <fs_rangetable>.
wd_this->mr_selopt->add_selection_field( i_id        = 'DATUM'
                                           it_result   = lt_range ).
lt_range = wd_this->mr_selopt->create_range_table( i_typename = 'UZEIT' ).
wd_this->mr_selopt->add_selection_field( i_id        = 'UZEIT'
                                           it_result   = lt_range ).
lt_range = wd_this->mr_selopt->create_range_table( i_typename = 'UNAME' ).
wd_this->mr_selopt->add_selection_field( i_id        = 'UNAME'
                                           it_result   = lt_range
                                           i_no_intervals = 'X'
                                           i_no_extension = 'X' ).
data: event type ref to cl_wd_custom_event.
create object event
exporting
    name   = 'EXECUTE'
   parameters =
wd_this->search_sel_opt(
    wdevent =    event                       " Ref to cl_Wd_Custom_Event
Maybe you can see my mistake?
regards
stefan

Entering numeric values with suffixes in Labwindows CVI (e.g 100 kHz instead of 100e3 or 100000 )

is there any practical way of entering numeric values with suffixes in Labwindows CVI in order to prevent user from struggling with '0' es.

In LabVIEW there is another Display Format called "SI Notation" that is exactly what you're looking for.
Maybe you can add a feature request in CVI Idea Exchange Forum and ask NI to add this Display Format in CVI too.
Vix
In claris non fit interpretatio
Using LV 2013 SP1 on Win 7 64bit
Using LV 8.2.1 on WinXP SP3
Using CVI 2012 SP1 on Win 7 64bit, WinXP and WinXP Embedded
Using CVI 6.0 on Win2k, WinXP and WinXP Embedded

Fill select-options in Page with flow logic ???

Hello All,
          I created a BSP Application using Page with Flow Logic.
In the first page of my Application I'm using 2 input fields as select-options.
Now I'm populating a Ranges of that Field using the type :-
selopttab
I populated the ranges table like :-
wa_bname_sel-sign   = 'I'.
          wa_bname_sel-option = 'BT'.
          wa_bname_sel-low    = '*'.
          wa_bname_sel-high   = 'Z'.
        ELSE.
          wa_bname_sel-sign   = 'I'.
          wa_bname_sel-option = 'EQ'.
          wa_bname_sel-low    = p_bname.
          wa_bname_sel-high   = p_bname.
        ENDIF.
        APPEND wa_bname_sel TO p_bname_sel.
        CLEAR wa_bname_sel.
But the problem is I checked the corresponding DATABASE Table entries by passing thesame value .
i.e I passed the low and high values to the field as '*' and 'Z'.
The total number of entries differ when passing '*' and 'Z' to when passing SPACE.
I tried even with contains Pattern .This time the total number of records fetching has Increased but the sum is not exact when passed SPACE to the Database Table.
So what should I pass to the Low and High values of my Ranges Table to get all the entries ????
DOes this type of building the Ranges work in BSP's ?
How are u people working out for the select-options functionality in Page with flow logic ?
Message was edited by:
        deepu k

Hello Jessy,
To populate select-options or Ranges in Page with flow logic I used the following code :
************************ Bulid the Select-Options**************************************
      DATA: p_bname_sel     TYPE STANDARD TABLE OF selopttab,
            p_bsp_name_sel TYPE STANDARD TABLE OF selopttab,
            p_tcode_sel     TYPE STANDARD TABLE OF selopttab.
      DATA: wa_bname_sel    TYPE selopttab,
            wa_bsp_name_sel TYPE selopttab,
            wa_tcode_sel    TYPE selopttab.
* Select-Options for Username
      REFRESH p_bname_sel.
      CLEAR   wa_bname_sel.
      IF ( p_bname IS INITIAL ).
        wa_bname_sel-sign   = 'I'.
        wa_bname_sel-option = 'CP'.
        wa_bname_sel-low    = '*'.
        wa_bname_sel-high   = ''.
      ELSE.
        wa_bname_sel-sign   = 'I'.
        wa_bname_sel-option = 'EQ'.
        wa_bname_sel-low    = p_bname. " p_bname is the Input field and the value is taken from it
        wa_bname_sel-high   = p_bname.
      ENDIF.
      APPEND wa_bname_sel TO p_bname_sel.
      CLEAR wa_bname_sel.
* Select-Options for BSP_Application
      REFRESH p_bsp_name_sel.
      CLEAR   wa_bsp_name_sel.
      IF ( p_bsp_name IS INITIAL ).
        wa_bsp_name_sel-sign   = 'I'.
        wa_bsp_name_sel-option = 'CP'.
        wa_bsp_name_sel-low    = '*'.
        wa_bsp_name_sel-high   = ''.
      ELSE.
        wa_bsp_name_sel-sign   = 'I'.
        wa_bsp_name_sel-option = 'EQ'.
        wa_bsp_name_sel-low    = p_bsp_name.       " Input field
        wa_bsp_name_sel-high   = p_bsp_name.
      ENDIF.
      APPEND wa_bsp_name_sel TO p_bsp_name_sel.
      CLEAR wa_bsp_name_sel.
* Select-Options for TCODE
      REFRESH p_tcode_sel.
      CLEAR   wa_bsp_name_sel.
      IF ( p_tcode IS INITIAL ).
        wa_tcode_sel-sign   = 'I'.
        wa_tcode_sel-option = 'CP'.
        wa_tcode_sel-low    = '*'.
        wa_tcode_sel-high   = ''.
      ELSE.
        wa_tcode_sel-sign   = 'I'.
        wa_tcode_sel-option = 'EQ'.
        wa_tcode_sel-low    = p_tcode.       " Input field
        wa_tcode_sel-high   = p_tcode.
      ENDIF.
      APPEND wa_tcode_sel TO p_tcode_sel.
      CLEAR wa_tcode_sel.
* Select all the related entries when either BSP or TCode is choosen
      IF ( ( p_bsp_name IS NOT INITIAL ) AND ( p_tcode IS INITIAL ) )
                 OR
         ( ( p_bsp_name IS INITIAL ) AND ( p_tcode IS INITIAL ) ).
        REFRESH gt_final.
        SELECT bname
               bsp_name
               description
               ldate
               ltime
               calls
               FROM <custom_table>
               INTO TABLE gt_final
               AND   bsp_name IN p_bsp_name_sel
               AND   ldate          IN p_ldate_sel.
endif.
Hope that wud help u !!!
Regards,
Deepu.K

Searching for numeric values in a text field / SQL Server

Hi all,
here's a problem that I've been trying to solve for several days: I try to select rows from an MS SQL Server via JDBC that contain a certain numeric value at a certain position in a long varchar field.
I'm using queries like
select * from table where substring(field_1, 37, 7) like '1011234';Those queries always return an empty ResultSet. If I use the same queries in WinSQL, I get correct results (several rows).
The application code is working in principle; if I search for a text instead of a numeric value, for example select * from table where substring(field_1, 4, 5) like 'Paper'; , I get a complete ResultSet.
I've tried many variations (= instead of like, search in the entire field (without substring but with like '%1011234%'), with or without ', and more), but that didn't change anything.
It's also most probably not caused by the JDBC driver; I have tried JTDS first, and then the MS driver (newest versions) - no difference.
One idea was that the sort order is not correct, tried some COLLATE settings, but that didn't help so far. In this context I'd like to know how to determine the collation sequence of a certain column.
Another thing I tried was using CAST, for example SELECT * FROM table WHERE CAST(SUBSTRING(field_1, 37, 7) as bigint) = CAST('1011234' as bigint); or SELECT * FROM table WHERE CAST(SUBSTRING(field_1, 37, 7) as bigint) = CAST(1011234 as bigint);, but that didn't help either.
Some facts:
Server: Microsoft SQL Server, version 09.00.2047
Driver in WinSQL: SQLSRV32.DLL, version 03.85.1117
JDBC-Driver:
- JTDS, version 1.2
- Microsoft SQL Server 2005 JDBC Driver, Version 1.2
JVM: jre1.5.0_11
I didn't find anything on Google, or in this forum, or other forums. I really hope someone here can help me. Thanks in advance!
Best regards,
Uica

Your note suggests to me that this is a coding problem, not a JDBC or SQL problem unless you are hitting a bug in the SQL Server JDBC driver. Others may have ideas from what you have written, but I think it would be helpful to see the actual code that you are executing that does not bring back the results that you are expecting (don't forgot to use code tags to format your code correctly).
It might also be helpful to execute a query (from within your Java code) to ensure that you are connecting to the right database, accessing the correct table and that your substring is using the correct offset. The query would look something like this (and then of course display the list of results):
SELECT substring(field_1, 37, 7) from table

Select options: Restricting Value Display in Search Help Parameters

Hello friends,
I have following requirement.
I have declared one select option. On that select options I'am having different search help paremeters on which I can restrict the search help values display.
Can I specify the restriction in search help at the time of programming so that it would display only the values that follows the given restriction?
I can ofcourse do this by AT SELECTION-SCREEN ON VALUE REQUEST, however I am trying to avoid this.
How can I proceed?
Points will be rewarded generously.
Best Regards,
Navin

hI
SEE THIS CODE
**************DATA TYPES DECLARATION **********************
TABLES: HRP1001, HRP1026, HRP1000,PCHDY.
TYPE-POOLS SLIS.
TYPES :BEGIN OF ST_OUTPUT,
        COUNT TYPE STRING,
        OBJID TYPE HRP1001-OBJID,
        STEXT TYPE HRP1000-STEXT,
        BEGDA TYPE HRP1000-BEGDA,
        ENDDA TYPE HRP1000-ENDDA,
        CANCRT TYPE T77CRT-CANCRT,
        AEDTM TYPE HRP1026-AEDTM,
        UNAME TYPE HRP1026-UNAME,
        LSTEXT TYPE HRP1000-STEXT,
       RINVT TYPE T777V-RINVT,
       END OF ST_OUTPUT.
TYPES: BEGIN OF ST_HRP1000,
        OBJID TYPE HRP1001-OBJID,
        STEXT TYPE HRP1000-STEXT,
       END OF ST_HRP1000.
TYPES : BEGIN OF ST_HRP1001,
         OTYPE TYPE HRP1001-OTYPE,
         OBJID TYPE HRP1001-OBJID,
         RELAT type hrp1001-RELAT,
         BEGDA TYPE HRP1001-BEGDA,
         ENDDA TYPE HRP1001-ENDDA,
         SCLAS TYPE HRP1001-SCLAS,
         SOBID TYPE HRP1001-SOBID,
        END OF ST_HRP1001.
TYPES : BEGIN OF ST_HRP1026,
         OTYPE TYPE HRP1026-OTYPE,
         OBJID TYPE HRP1001-OBJID,
         AEDTM TYPE HRP1026-AEDTM,
         UNAME TYPE HRP1026-UNAME,
         DELET TYPE HRP1026-DELET,
         CANCR TYPE HRP1026-CANCR,
        END OF ST_HRP1026.
TYPES : BEGIN OF ST_REASON,
         CANCR TYPE HRP1026-CANCR,
         CANCRT TYPE T77CRT-CANCRT,
        END OF ST_REASON.
TYPES : BEGIN OF ST_SOBID,
         OTYPE TYPE HRP1001-OTYPE,
         OBJID TYPE HRP1001-OBJID,
         RELAT type hrp1001-OBJID,
         BEGDA TYPE HRP1001-BEGDA,
         ENDDA TYPE HRP1001-ENDDA,
         SCLAS TYPE HRP1001-SCLAS,
         SOBID TYPE HRP1001-OBJID,
        END OF ST_SOBID.
TYPES : BEGIN OF ST_OBJID,
         OBJID TYPE HRP1001-OBJID,
        END OF ST_OBJID.
TYPES : BEGIN OF ST_LOCATION,
         OTYPE TYPE HRP1001-OTYPE,
         OBJID TYPE HRP1001-OBJID,
         RSIGN TYPE HRP1001-RSIGN,
         RELAT TYPE HRP1001-RELAT,
         SCLAS TYPE HRP1001-SCLAS,
         SOBID TYPE HRP1001-SOBID,
        END OF ST_LOCATION.
TYPES : BEGIN OF ST_LOCATION1,
         OTYPE TYPE HRP1001-OTYPE,
         OBJID TYPE HRP1001-OBJID,
         RSIGN TYPE HRP1001-RSIGN,
         RELAT TYPE HRP1001-RELAT,
         SCLAS TYPE HRP1001-SCLAS,
         SOBID TYPE HRP1001-OBJID,
        END OF ST_LOCATION1.
TYPES : BEGIN OF ST_LSTEXT,
         OTYPE TYPE HRP1000-OTYPE,
         OBJID TYPE HRP1000-OBJID,
         LSTEXT TYPE HRP1000-STEXT,
        END OF ST_LSTEXT.
TYPES : BEGIN OF ST_OBJID_SH,
         OTYPE TYPE HRP1000-OTYPE,
         OBJID TYPE HRP1000-OBJID,
        END OF ST_OBJID_SH.
DATA : IT_OBJID_SH TYPE STANDARD TABLE OF ST_OBJID_SH.
DATA : WA_OBJID_SH TYPE ST_OBJID_SH.
DATA : IT_LSTEXT TYPE STANDARD TABLE OF ST_LSTEXT.              "TOS STORE THE TEXT OF COURCE LOCATION
DATA : WA_LSTEXT TYPE ST_LSTEXT.
DATA : IT_LOCATION TYPE STANDARD TABLE OF ST_LOCATION.          " TO STORE THE LOCATION OF COURCE
DATA : WA_LOCATION TYPE ST_LOCATION.
DATA : IT_LOCATION1 TYPE STANDARD TABLE OF ST_LOCATION1.        " TO CONVERT SOBID INTO OBJID FOR COURCE LOCATION
DATA : WA_LOCATION1 TYPE ST_LOCATION1.
DATA : IT_SOBID TYPE STANDARD TABLE OF ST_SOBID.                " TO CHANGE THE SOBID OF HRP1001 TO OBJID OF HRP1026
DATA : WA_SOBID TYPE ST_SOBID.                                   " BY USING FOR ALL ENTRIES
DATA : IT_REASON TYPE STANDARD TABLE OF ST_REASON.              "TO STORE T HE REASON FOR CANCELL TEXT
DATA : WA_REASON TYPE ST_REASON.
DATA : IT_OUTPUT TYPE STANDARD TABLE OF ST_OUTPUT.               "OUTPUT FEILDS OF REPORT.
DATA : WA_OUTPUT TYPE ST_OUTPUT.
DATA : IT_OUTPUT_1 TYPE STANDARD TABLE OF ST_OUTPUT.               " TEMP OUTPUT FEILDS OF REPORT.
DATA : WA_OUTPUT_1 TYPE ST_OUTPUT.
DATA : IT_HRP1000 TYPE STANDARD TABLE OF ST_HRP1000.             "DATA FROM HRP1000 TABLE
DATA : WA_HRP1000 TYPE ST_HRP1000.
DATA : IT_HRP1001 TYPE STANDARD TABLE OF ST_HRP1001.             "DATA FROM HRP1001 TABLE
DATA : WA_HRP1001 TYPE ST_HRP1001.
DATA : IT_HRP1026 TYPE STANDARD TABLE OF ST_HRP1026.              "DATA FROM HRP1026 TABLE
DATA : WA_HRP1026 TYPE ST_HRP1026.
DATA : IT_OBJID TYPE STANDARD TABLE OF ST_OBJID.                  " TO STORE THE OBJID OF HRP1001
DATA : WA_OBJID TYPE ST_OBJID.
DATA: WS_FCAT    TYPE SLIS_FIELDCAT_ALV .                         " FEILDCATALOG FOR ALV REPORT
DATA: IN_FCAT    TYPE SLIS_T_FIELDCAT_ALV.
DATA: W_LAYOUT   TYPE SLIS_LAYOUT_ALV.
DATA : LV_COUNT TYPE I.                                           "FEILD FOR SERIAL NUMBER
***************************END OF DATA DECLARATION******************************************
************SELECTION SCREEN DESIGN************************
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
*SELECT-OPTIONS : S_OTYPE FOR HRP1001-OTYPE NO INTERVALS .
SELECT-OPTIONS : S_OBJID FOR HRP1001-OBJID NO INTERVALS .
SELECT-OPTIONS : DATE FOR SY-DATUM NO-EXTENSION OBLIGATORY.
SELECTION-SCREEN END OF BLOCK B1.
***********END OF SELECTION SCREEN DESIGN******************
*****INITIALIZATION VENT TO ASIGN DEFAULT VALUES TO OTYPE
*INITIALIZATION.
S_OTYPE-LOW = 'D'.*
S_OTYPE-SIGN = 'I'.*
S_OTYPE-OPTION = 'EQ'.*
APPEND S_OTYPE.*
CLEAR S_OTYPE.*
**************END OF EVENT INITIALIZATION******************
**********VALIDATION FOR SCREEN FIELDS*********************
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_OBJID-LOW.
IF S_OBJID IS NOT INITIAL.*
    SELECT OTYPE OBJID FROM HRP1000
                 INTO TABLE IT_OBJID_SH
                 WHERE OTYPE = 'D'.
IF SY-SUBRC EQ 0.
SEARCH HELP FOR QUALIFICATION.*
    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
      EXPORTING
             DDIC_STRUCTURE         = ' '*
        RETFIELD               = 'OBJID'
             PVALKEY                = ' '*
       DYNPPROG               = SY-REPID
       DYNPNR                 = SY-DYNNR
       DYNPROFIELD            = 'S_OBJID'
             STEPL                  = 0*
             WINDOW_TITLE           =*
             VALUE                  = ' '*
       VALUE_ORG              = 'S'
             MULTIPLE_CHOICE        = ' '*
             DISPLAY                = ' '*
             CALLBACK_PROGRAM       = ' '*
             CALLBACK_FORM          = ' '*
             MARK_TAB               =*
           IMPORTING*
             USER_RESET             =*
      TABLES
        VALUE_TAB              = IT_OBJID_SH
             FIELD_TAB              =*
             RETURN_TAB             = RETURN_TAB*
             DYNPFLD_MAPPING        =*
           EXCEPTIONS*
             PARAMETER_ERROR        = 1*
             NO_VALUES_FOUND        = 2*
             OTHERS                 = 3*
    IF SY-SUBRC <> 0.
          MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO*
                  WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.*
    ENDIF.
ENDIF.

Select options default value

Hi,
Kindly assist me on how to set a default value for dynamically created Select options.
I am coding the below code snippet for default value and it's working but when I remove the default value for the select option on portal screen ...I encounter a dump stating line type does not match with internal table.
wd_this->m_wd_select_options = wd_this->wd_cpifc_wdr_select_options_e( ).
init the select screen
wd_this->m_handler = wd_this->m_wd_select_options->init_selection_screen( ).
    lt_range_table = wd_this->m_handler->create_range_table( i_typename = 'STRING' ).
    assign lt_range_table->* to <range_table>.
    insert initial line into table <range_table> assigning <range_table_line>.
    assign component 'SIGN'   of structure <range_table_line> to <sign>.
   assign component 'OPTION' of structure <range_table_line> to <option>.
    assign component 'LOW'    of structure <range_table_line> to <low>.
    assign component 'HIGH'   of structure <range_table_line> to <high>.
    <sign>   = 'I'.
    <option> = 'EQ'.
    <low>    = 'ZA'.
    clear <high>.
    wd_this->m_handler->set_range_table_of_sel_field(
      i_id          = 'DY_PARVW'
     it_range_table     = lt_range_table ).
Points will be rewarded!!!!

Hi.
I use the following code (snippet) to add default values:
lt_range = lr_selop->create_range_table(
                                    i_typename = 'VKORG' ).
lr_selop->add_selection_field(
                     i_id = 'VKORG'
                     i_within_block = lv_id_gdata
                     i_no_intervals = abap_true
                     i_no_extension = abap_true
                     i_obligatory = abap_true
                     i_read_only = abap_true
                     it_result = lt_range
                     i_value_help_type = if_wd_value_help_handler=>co_prefix_none ).
DATA:
        lr_user        TYPE REF TO zcl_user,
        lr_param       TYPE REF TO data,
        lr_headerline TYPE REF TO data.
DATA:
        ls_tmprange    TYPE rsparams.
FIELD-SYMBOLS:
                 <fs_param>      TYPE ANY,
                 <fs_range>      TYPE ANY,
                 <fs_rangetable> TYPE table.
lr_user = zcl_user=>get_instance( ).
lr_param = lr_user->get_usermaster_param(
     param_name = param_name
ASSIGN lr_param->* TO <fs_param>.
MOVE <fs_param> TO ls_tmprange-low.
IF ls_tmprange-low IS NOT INITIAL.
    ls_tmprange-sign = zcl_salsa_assistance=>userparam_sign_default.
    ls_tmprange-option = zcl_salsa_assistance=>userparam_option_default.
    ASSIGN lr_range->* TO <fs_rangetable>.
    CREATE DATA lr_headerline LIKE LINE OF <fs_rangetable>.
    ASSIGN lr_headerline->* TO <fs_range>.
    MOVE-CORRESPONDING ls_tmprange TO <fs_range>.
    APPEND <fs_range> TO <fs_rangetable>.
ENDIF.
lr_user->get_usermaster_param( param_name = param_name ) just returns a data reference to a parameter value.
After assigning this value to the range table i do not have to call set_range_table_of_sel_field cause lr_range is already a reference to the range table.
This works well and I can remove the default value without getting dumps.
Cheers,
Sascha

Select-option default value???

DATA: gsber1         like csks-gsber.
select distinct GSBER
into (gsber1)
from csks
where kostl = sch_kostl.
endselect.
SELECT-OPTIONS : gsber    FOR csks-gsber DEFAULT gsber1.
why not input value gsber1?

Pung,
Pls. see the docs. below.
To assign default values to a selection criterion, you use the following syntax:
SELECT-OPTIONS <seltab> FOR <f> DEFAULT <g> [TO <h>] ....
Default values <g> and <h> can be literals or field names. You can only use fields that contain a value when the program is started. These fields include several predefined data objects.
For each SELECT-OPTIONS statement, you can specify only one DEFAULT addition. This means that you can fill only the first row of selection table <seltab> with default values. To fill more rows with default values, the selection table must be processed before the selection screen is called, for example, during the AT SELECTION-SCREEN -OUTPUT event.
You use the DEFAULT addition as follows to address the individual components of the first row:
To fill only the LOW field (single field comparison), use:
........DEFAULT <g>.
To fill the LOW and HIGH fields (range selection), use:
........DEFAULT <g> TO <h>.
To fill the OPTION field, use:
........DEFAULT <g> [to <h>] OPTION <op>.
For single field comparisons, <op> can be EQ, NE, GE, GT, LE, LT, CP, or NP. The default value is EQ. For range selections, <op> can be BT or NB. The default value is BT.
To fill the SIGN field, use:
........DEFAULT <g> [to <h>] [OPTION <op>] SIGN <s>.
The value of <s> can be I or E. The default value is I.
The input fields of the selection criterion are filled with the default values. The user can accept or change these values.
REPORT DEMO.
DATA WA_SPFLI TYPE SPFLI.
SELECT-OPTIONS AIRLINE FOR WA_SPFLI-CARRID
               DEFAULT 'AA'
                    TO 'LH'
                OPTION NB
                  SIGN I.
Don't forget ot reward if useful...

Select options numeric value with asterisk in field screen.

Similar Messages

Maybe you are looking for