Select which fields to copy of fields during creation of new version

Hi Gurus-
Is it possible to set config in a manner that will copy the authorization group value when creating a new version?
Thanks!
-J
Edited by: Jennifer Kramer on Mar 14, 2011 6:18 PM

Hi,
U have more samples for the scenario u can surf into our OTN Forum even for that
http://forums.oracle.com/forums/search.jspa?threadID=&q=copy+row&objID=f83&dateRange=all&userID=&numResults=30&rankBy=10001
Have a valueChange Listener for the Boolean chack box else if it binded in a ViewObject without Entity do the same in ViewRowImpl setter of the Check box Attrinute
If has entity do it in EntityImpl setter of the check Box Attribute...
Regards,
Suganth.G

Similar Messages

During downloading the new version, it stops with a "waiting" status when Internet's cut happened. Since, impossible to restart or to download again. Help !

During downloading the new version, it stops with a "waiting" status when Internet's cut happened. Since, impossible to restart or to download again. Help !

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

I've a very important document which I can't open anymore: You need a newer version of Numbers to open this spreadsheet.

I've a very important document which I can't open anymore: You need a newer version of Numbers to open this spreadsheet.

I figured out that it doesn't matter, actually it is Qsync, but other prgrams such Sugar Sync create teh same problem
The sync program adds a suffix to the files insite the numbers container
When looking at the files inside the Numbers file/folder, I saw this (note: Alphonse is the name of my computer):
drwxr-xr-x@ 9 thibaut staff   306B Mar 14 09:21 .
drwxr-xr-x 8 thibaut staff   272B Mar 14 09:30 ..
-rw-r--r-- 1 thibaut staff    26B Mar 4 14:31 .LSOverride
drwxr-xr-x 2 thibaut staff    68B Mar 14 09:21 Data
-rw-r--r--@ 1 thibaut staff   262K Jan 3 13:21 Index (from Alphonse).zip
drwxr-xr-x 5 thibaut staff   170B Mar 14 09:21 Metadata
-rw-r--r--@ 1 thibaut staff   101K Jan 3 13:21 preview (from Alphonse).jpg
-rw-r--r--@ 1 thibaut staff   1.4K Jan 3 13:21 preview-micro (from Alphonse).jpg
-rw-r--r--@ 1 thibaut staff    11K Jan 3 13:21 preview-web (from Alphonse).jpg
I renamed the files to remove the suffix, like this:
-rw-r--r--@ 1 thibaut staff    11K Jan 3 13:21 preview-web.jpg
drwxr-xr-x@ 9 thibaut staff   306B Mar 14 09:32 .
drwxr-xr-x 8 thibaut staff   272B Mar 14 09:30 ..
-rw-r--r-- 1 thibaut staff    26B Mar 4 14:31 .LSOverride
drwxr-xr-x 2 thibaut staff    68B Mar 14 09:21 Data
-rw-r--r--@ 1 thibaut staff   262K Jan 3 13:21 Index.zip
drwxr-xr-x 5 thibaut staff   170B Mar 14 09:21 Metadata
-rw-r--r--@ 1 thibaut staff   1.4K Jan 3 13:21 preview-micro.jpg
-rw-r--r--@ 1 thibaut staff   101K Jan 3 13:21 preview.jpg
That fixed the problem and the file now opens correctly in Numbers 3.
You can take the numbers file into a windows machin, the file is shown as a folder and then remive teh suffix.
and like magic the file can then be opend in Numbers V3.1

Setting for manadetory field during creation of new vendor

To,
Everyone,
While creating vendor centrally in XK01, I want some field should be mandetory like payment terms, check double invoice verification and payment block.
Thanks in advance
Regards,
Pravin Chaudhari.

Hi,
SPRO -> Logistic - General -> Business Partner -> Vendor -> Control -> Define Account Groups and Field Selection (Vendor)
Click ur Account Group & make field like example ..
Click Purcahsing data in Field Status TAB
(In next screen )Again click purcahisng data in Selection Group
(In next screen )Now make payment term is "Required Entry" and save.
Regards,
Biju K
Edited by: Bijay Kumar Barik on Sep 1, 2008 10:44 AM

Copy a record to create a new "version"

Hi,
I was wondering if anyone had a suggestion on the best way to tackle the following:
I have a table with a list of software versions (and details about each version), when a piece of software is upgraded i don't want to simply change the version number. Instead i have a field called "Current" which is either 1 or 0 depended on if the software is the current version in use. The basic idea is to form a list over time of current software version, and versions we used to use.
I would like it so the person doing the upgrade can go to the software version table, click an "upgrade" button which changes the "current" field to 0 and then creates a copy of the record in which the current field is 1 and the user is the presented with a form to update anything which is different from this version to the last (typically the version number but sometimes more).
So basically the old version is archived, a new record is created which is an exact copy of the old one (new primary key obviously), which is then updated as required.
If you need any more info please ask,
Thanks in advance.
EDIT:
I've created a link to "upgrade" the software, which appears in a new column at the end of each row, and have written the copy code as a page process... now i need to know is possible to set a condition which applies to links/buttons been clicked within a table.
So the process only runs when the user clicks the upgrade link on the report.
Message was edited by:
iainr
Message was edited by:
iainr

Thanks for your response Mike, exactly what i need.
Just a few questions.
I have set the upgrade link to go to the "edit software" page passing a variable that gets set to UPGRADE. But trying to do several actions at the beginning of the new page was proving a nightmare,
is the way you have suggested as follows:
Click link -> Create New Row -> update old row
MOVE TO EDIT PAGE
Load new software details.
If so, then the real question is, how do i make the page process that is running "on submit" only run when the link "upgrade" is clicked. Upgrade is technically a link not a button so i cannot select it from the list of buttons on the condition page, and i'm not sure if you can use passed variables until you load the new page.
Sorry if it's a little confusing,
Thanks again for the help,
Iain

Error during creation of new movement types

hi frnds,
while creating a new movement type for 311 with z11....in help text tab..it is showing an error..
" Entry HULIST does not exist in TSTC (check entry) "...how do i resolve this.
Regards,
Prasath

Hey while copying the movement type to another use OMJJ
If any table entry is missing that can be maintained in SM30
Check it out
Regards,
Raman

Password not sent with mail during creation of new acct on GRC 10

Hello Experts,
When a new user is being created and when his access has been approved and he gets the closing mail the system is not sending a password mail or password with that closing mail.
Is there some setting which needs to be done for this to be able to send out password with mails.
When I do just a PSS it sends out mails to users.
Thanks
Uday

Hi,
In the notification emails, do you get details of the new User ID created and the roles assigned per system etc? We had issues earlier in a project when creating the POC system as the notifications would provide the message "Error In Provisioning" whilst the Application logs stated everything was created and provisioned correctly.
I noticed that you have issues in being able to assign a "End of Request" e-mail notification in the first step of the MSMP config. It may be worth getting in touch with SAP.
As you are on SP07, the notes I had to implement are not applicable as they were all included into the SP07 release.
It might be worth checking with Basis that the password parameters have been set up for the system password wizard etc.
Will update the forum thread if I find anything to share.
All the best

I just upgraded to Firefox 5. How can I get a copy of Firefox 4. The new version does not work with Skype's auto dialer.

How can I get a copy of the previous version of Firefox? The latest version (5) does not support Skype's auto dialer. I use this tool to be more productive.

Due to security vulnerabilities, rolling back to Firefox 4.0.1 is not recommended.
If Firefox disabled some add-ons (especially extensions), it likely is because they include a list of compatible Firefox versions and haven't yet been updated for Firefox 5. If they worked on Firefox 4, there is a good chance they will work on Firefox 5.
You can force Firefox to ''ignore'' add-on version restrictions by (what else) installing an add-on. Then you can test whether the add-ons important to you actually work in Firefox 5.
[https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/ Add-on Compatibility Reporter :: Add-ons for Firefox]
After you install this add-on and restart Firefox, there will still be a message that "--- is incompatible with Firefox 5.0" but the add-on will be enabled and a Disable button will appear for that entry.
Please report back on your results.

Error during creation of Planning Version in SAP - ICH

Hi All,
I'm working on SAP-ICH, in that i tried to create planning version after creating the planning model but the system is giving information " General error in model/planning version management " . Could you please tell me the reason why this is happening and how to rectify the problem.
Thanking U all in advance.
Yashu Vyas.

Hi Vashu
My name is Vinod Tiwari.I am a SAP Technical Consultant with 4 years of exp in ABAP.Now i have a interest in SCM ICH 5.0.Could you pls guide me whats the way to start learning this.
Mo mobile no is +919899119182.
u can mail me ur valuable suggestion on my mailid [email protected]
Waiting for your reply.
Thanks and Regards
Vinod Tiwari

Error during creation of new company

hi
I am getting an error while trying to create new company. The error is
"No matching record found (ODBC -2028)". I have created a company before but now i can't on bothe
Server & Client system.
thanks & regards
Annu

Hi Annu......
I would suggest you to do the following steps....
Restart the server and then all the SP services one by one.
Go to License Manager and set the server name freshly from Configure security.
Hope this would help you to sort out your issue.......
Regards,
Rahul

Object link selection (Required) by user while new version creation

Hi All,
In ECC 6 While creating the new version of DIR ,SAP easy DMS is showing pop up to select the existing object link , how can we stop this and enable to copy the existing object link in new version which working fine in SAP R/3 4.7.
Regards
shiv

Dear Shiv,
you can change this behavior in the customizing of the document type in transaction DC10 for each object type.
Just go to DC10 and mark the affected document type. Then click on "Define object links" and double click on the object type. On the next screen you should see a field called "When New Version". Here you can use the F4 help to choose which behavior you want to have.
Best regards,
Christoph

New version creation of document - having option to files selection

Hi SAP folks
Need your valubale inputs in an issue we have now ,
we are using easyDMS 7.0 version
We have created a Document with a version and have 2 files attached to the document .
Now when we try to create a new version of the same document , currently both the files get attached in the new version of the document and we need to manually delete the files which is not required as an attachment
during the creation of new version can we have option to select the required files to be attached in the new version of the document .
Thanks
Achuthan

Dear Achuthan,
regarding your message I have to inform you that this behavior cannot be changed in EasyDMS.
Best regards,
Christoph

Copy/Paste difference in newer versions

Hello, I developed some problems with my Acrobat Standard 7.0 install when trying to update to 7.1 (it wasn't recognizing my CS2 install disk as the correct source disk it was requesting) so in the mean time I downloaded the latest version so I could access PDF files. I do a lot of copying and pasting from my professors' Powerpoint notes that have been coverted to PDF. In 7.0 I could select all the content, copy and paste into Word and the breaks between each slide did not copy over (which is what I want).
Now with the newer version the page breaks come along with the copied content, and I cannot figure out how to get rid of them. When I turn on display of formatting symbols in Word I see a small black square where these hard page breaks are, and nothing I do seems to make them go away short of pasting the content into a plain text editor then pasting into Word, but I lose all other formatting that way as well which isn't working for me either.
Should I just hunt around for a download of the 7.0 version of the free reader, or was this functionality related to having the full version?
Thanks!!

Hi Larry,
Thank you for your suggestion. If you can't tell already, I am far from an Illustrator power user...
I verified my clipboard settings looked as the attached image and it still did not seem to work. I also tried every combination of options and none of them worked either.
Work Flow: I will highlight the paths and copy them, then in the embroidery software when I hit paste, the mouse cursor turns into the processing icon for a split second like it's trying to paste, but nothing ever shows up in the embroidery software.
I reinstalled Illustrator CS4 alongside CS5 this morning, and tried the same copy/paste process with CS4 (from an illustrator file created in CS5)... works like a charm. I realize that downgrading to CS4 is not the solution. However, not being able to correctly operate the copy/paste commands is toying with my ego...

Dynamic Measure - Selecting which fields to include in a calculation

Hello all,
and thank you so much for spending your time reading this. I'm working on PowerPivot in Excel 2010. But if you know there's a solution in 2013, please let me know and I'll try to justify an upgrading. I have a table for my data source where the rows
are products and I have a list of columns with years. Each cell is the number of items sold:
I'm setting up a spreadsheet in Excel 2010 and also a page in PowerView to compare how they look. I have some slicers that work on which items to be included in the calculations, ie. average sales. Is there a way to create a slicer / filter fo
the user to select which years to include in the calculation of the average! For example: With slicers to select item 1 and item 2, but only years 2012 and 2013 to be included in the calculation of an average of sales? I can easily create
a slicer on items and a measure to calculate that average. However, I can't put the years in the equation.
Is there a way? Thank you

You could accomplish this with the technique of using disconnected tables/slicers in PowerPivot. There are quite a few blog posts out there about different applications of disconnected tables/slicers. Basically, it allows for using slicers as
a means of entering parameters into your measures. Although extremely useful in many situations, it may be a little advanced and confusing for a new Power Pivot user.
An easier option may be to reshape (unpivot) your data. Instead of a short, wide table, it could be transformed into a long skinny table. In other words, instead of having a different column for each year, you would only have a single column
called Year and another column called Values. The Items column would simply contain duplicate entries for each item depending on the number of years. No matter how many years are added in the future, you data table would still only have 3 columns
(Items, Year, and Value). In this scenario, measures are usually easier to write and the year column could also be used as a slicer. The bonus is that PowerPivot is designed to perform much faster on long, skinny tables with fewer columns.
If your source data is from a database such as SQL Server, then your DBA can most likely create an unpivoted view for you pretty easily. If that isn't an option or your data is from another source, you should download Power Query. This is free
Excel Add-in from Microsoft, in the same family as Power Pivot, that is designed to reshape data from many different sources with no coding necessary in most cases. Power Query has an Unpivot command built in and the results can be imported directly
to Power Pivot.

Copy control fields

When we configure copy controls we have a field "COPY QUANTITY" this is left blank when copying from sales order to another sales order, from QT to OR we make +ve and from contract to Return we make it -ve. Can anybody explain me the logic behind this. How is this field useful?
Also in copy controls there is a field called "Copy product selection"can body explain me the functionality of this field.
Thanks in advance.
Venkat

dear venkat Rao
Positive/Negative quantity: 
Quantity is calculated positively or negatively.
It indicates during copying the quantity or value in the target documents has a negative or positive or no effect at all. The quantity still to be completed in the source document.
Use: System uses this indicator to determines how the quantity in the source document is effected
Ex: If you create pieces and raised the sales order for 80 items, then quotation has a positive effect, that means 80 pieces of the quotation treated as completed and 20 pieces of the quota ion rated as remained to be completed.
In sales document:
Quotation          Sales order     : positive
Contract          Returns             : Negative
Sales order          Sales order        : No effect
In billing document:
Delivery               Invoice          : positive
Delivery               Cancellation     : Negative
Delivery               Pro- forma invoice: No effect
Copying quantity:
It determines the quantity that is copied to the target document. If you leave this field then system tries to copy the best possible quantity depending on situation.
Ex: System copies open quantity if it is from quotation to order
System copies completed quantity if it is billing to credit memo
Copy product selection:
It specifies whether system automatically copies the result of the product selection from the source document to target document. If you want to copy the results of product selection from source document to target document mark this field.
If you want to re-run product selection in the target document leave this field
rewards if it helps
siva
Message was edited by:
        siva narayana

Select which fields to copy of fields during creation of new version

Similar Messages

Maybe you are looking for