Selected Keywords do NOT all get written to selected files. bug

have discovered and confirmed with adobe tech support a bug with adobe bridge cs4 not writing keyword metadata tags to multiple selected files..
PSD files and raw,jpegs when selected with PSDs fail to write metadata keywords to file. If you select a batch of PSD files or a batch of PSD's and raws,jpegs etc.. then select check boxes of keywords to apply, only some of those keywords will be applied. You can verify this after the write cycle by noticing a "-" sign showing they are not all the same. Raw and other files do not apear to have this problem.
I have verified this problem with adobe techsupport- having them repeat this problem on their own computer. They repeated this on a mac, I currently run xp. so this is platform independent and looks to be a core adobe bridge issue.
I do not know if light room has this same issue but would be worth checking.
I have filed a case report and bug report and apparently am the first one. I find that suprsing as I figure many designers would be using key wording for thier work flow and thsi type of bug is a show stopper.
Work around in bridge is to select psd's independently and select ONE keyword to apply at a time and wait for (lower left screen) write cycle indicator to stop before adding additional keywords.

I have this bug too in my Bridge CS4.I work on Windows XP SP3.
I need to index picture library, that contains a lot of PSD-files (about a 50 megabytes each).
Do you know - Is this bug fixed now?
Do you have any decision of this problem?
Just right i try to use multilayered TIFF instead of PSD.

Similar Messages

HT4236 Not all photo albums i select are syncing. Anyone have an idea why?

Not all the albums I select are syncing. I go to Device > photos >select "selected albums" then choose the albums i want on my ipod touch then hit apply. when its "done" syncing I check my photos in the ipod and only two albums show up out of the 9 i've selected. And theres this stubborn album that won't go away. anyone know what the problem is? And its NOT a software update issue, ive updated it several times.

Error 1009 means you are attempting to download from the AppStore in a
country other than the one you are located in or from an AppStore other
than the one you have an account in. That error can also mean that you
are in a country that is blocked.
If your government has blocked AppStore, Apple must comply. Get your government
to remove the restriction. This is not a decision by Apple, but by your government.

"select * from table" and "select top 14260 from table" get nothing but select top 14259 get result successful

select * from tablename ------always running,but get nothing
select top 1 * from tablename -------get result quickly
select top 2 * from tablename -------get result quickly
select top 14259 * from tablename --------get result quickly
select top 14260 * from tablename --------always running,but get nothing
the thread is:
java.net.SocketInputStream.socketRead0(Native Method)
java.net.SocketInputStream.read(SocketInputStream.java:150)
java.net.SocketInputStream.read(SocketInputStream.java:121)
com.microsoft.sqlserver.jdbc.TDSChannel.read(IOBuffer.java:1782)
com.microsoft.sqlserver.jdbc.TDSReader.readPacket(IOBuffer.java:4838)
- 已锁定com.microsoft.sqlserver.jdbc.TDSReader@54269910
com.microsoft.sqlserver.jdbc.TDSCommand.startResponse(IOBuffer.java:6150)
com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement.doExecutePreparedStatement(SQLServerPreparedStatement.java:402)
com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement$PrepStmtExecCmd.doExecute(SQLServerPreparedStatement.java:350)
com.microsoft.sqlserver.jdbc.TDSCommand.execute(IOBuffer.java:5696)
com.microsoft.sqlserver.jdbc.SQLServerConnection.executeCommand(SQLServerConnection.java:1715)
- 已锁定java.lang.Object@320b1499
com.microsoft.sqlserver.jdbc.SQLServerStatement.executeCommand(SQLServerStatement.java:180)
com.microsoft.sqlserver.jdbc.SQLServerStatement.executeStatement(SQLServerStatement.java:155)
com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement.execute(SQLServerPreparedStatement.java:332)

when I run the below sql of Uri Dimant,I get many rows,I think you are right!
Do you have some method to handle this problem?
Or do you have some information for me to Learn?
Thanks a lot.
SELECT
owt.session_id AS waiting_session_id,
owt.blocking_session_id,
DB_NAME(tls.resource_database_id) AS database_name,
(SELECT SUBSTRING(est.[text], ers.statement_start_offset/2
+ 1,
(CASE WHEN ers.statement_end_offset = -1
THEN LEN(CONVERT(nvarchar(max), est.[text])) * 2
ELSE ers.statement_end_offset
END
- ers.statement_start_offset
) / 2)
FROM sys.dm_exec_sql_text(ers.[sql_handle]) AS est) AS waiting_query_text,
CASE WHEN owt.blocking_session_id > 0
THEN (
SELECT
est.[text] FROM sys.sysprocesses AS sp
CROSS APPLY sys.dm_exec_sql_text(sp.[sql_handle]) as est
WHERE sp.spid = owt.blocking_session_id)
ELSE
NULL
END AS blocking_query_text,
(CASE tls.resource_type
WHEN 'OBJECT' THEN OBJECT_NAME(tls.resource_associated_entity_id, tls.resource_database_id)
WHEN 'DATABASE' THEN DB_NAME(tls.resource_database_id)
ELSE (SELECT OBJECT_NAME(pat.[object_id], tls.resource_database_id)
FROM sys.partitions pat WHERE pat.hobt_id = tls.resource_associated_entity_id)
END
) AS object_name,
owt.wait_duration_ms,
owt.waiting_task_address,
owt.wait_type,
tls.resource_associated_entity_id,
tls.resource_description AS local_resource_description,
tls.resource_type,
tls.request_mode,
tls.request_type,
tls.request_session_id,
owt.resource_description AS blocking_resource_description,
qp.query_plan AS waiting_query_plan
FROM sys.dm_tran_locks AS tls
INNER JOIN sys.dm_os_waiting_tasks owt ON tls.lock_owner_address = owt.resource_address
INNER JOIN sys.dm_exec_requests ers ON tls.request_request_id = ers.request_id
AND owt.session_id = ers.session_id
OUTER APPLY sys.dm_exec_query_plan(ers.[plan_handle]) AS qp
GO

PSE10 - Keyword tags not all showing when tagging faces?

When I import a new picture, if I manually add a face tagging box, then click on the text box and type the first letter of a name, only certain of my keyword tag names show up? Some do not??? For instance, if I have the names Bella, Bill and Bess already as keyword tag names, when I type in the letter B, only Bill and Bess show up - Bella NEVER does? it happens with many different names and it is random - can someone help me figure out why it is not recognizing all keyword tag names?

When I import a new picture, if I manually add a face tagging box, then click on the text box and type the first letter of a name, only certain of my keyword tag names show up? Some do not??? For instance, if I have the names Bella, Bill and Bess already as keyword tag names, when I type in the letter B, only Bill and Bess show up - Bella NEVER does? it happens with many different names and it is random - can someone help me figure out why it is not recognizing all keyword tag names?

Not all records shown for selection - CR 2008

I have a crystal report that has dynamic record selection. The selections are set to allow multiple, allow discreet, allow ranges.
When I run the report I am not shown all records on the file to choose from.
The file has approx 6000 records. Does anyone know of any limitations? The file I am writnig report for is from Item Master in SAP. Thanks.

There is a registry entry that limits the number of records shown in a list of values (LOV). The default value is 1000. The registry key is Crystal reports version specific. You should be able to find the key by searching the forum for LOV 1000 or similar...
HTH,
Carl
Moderators: This question comes up once a week, it seems. Maybe we should "pin" the answer to the top of the forum board?

Reader X MUI - Not all languages available to select

I am trying to package and make Reader 10.1 MUI available for my company. Whenever I install the MUI on an XP SP3 system, only some of the languages are available at startup.
The ones that are available are: catala, Czech, dansk, Deutsch, English, espanol, euskara, francais, italiano, Nederlands, norsk, Portugues, suomi, svenska.
All the rest are greyed out an not selectable. I've installed all the language packs for the OS, and enabled all the language and region features and it doesn't make a difference. I've tried making a custom install to confirm that all languages are being installed, but still I am limited to which languages are available.
Has anyone had this issue or have any idea what it could be? This issue is not present on a Windows 7 machine.

This sound interesting. The upgrade has obviously failed to apply the options. I'd be interested in seeing how this is resolved. Please update the thread once resolved.
Cheers
Paul | sccmentor.wordpress.com

I have three iPhones using the same iTunes account, can we set something so that we are not all getting everyones txt messages to all phones?

I have three iPhones using the same iTunes account, can we set something so that all our txt messages are not appearing on all phones?

Settings > Messages > Receive At...
Any iPhone that lists the same email will receive the same texts. This has to be changed in order to stop receiving on all devices.

Not all of my pics from file manager have uploaded into our new version of photoshop elements?

We just upgraded to Adobe elements 12 -
In doing so - one of the files that I have been working on for months didn't totally convert over...so in file manager I have 450 pics...in the same folder in Adobe I have 54 pics..how do I get these all imported correctly?

Which operating system are you using?
If your using mac os x 10.6 (snow leopard) or windows xp or vista, then the below solution will not work and you shouldn't try to install the dng converter 8.5
You could use the free Adobe DNG Converter to convert your files to dng copies which should then open in pse 10.
windows:
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.5
mac:
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.5
how to use the dng converter
Camera Raw: How to use Adobe DNG Converter - YouTube

Employee selection table view not opening in MSS while selecting process

Hello Everyone,
In MSS, Team->Start Process for Employee Employee selection table view is not visible, so without selecting employee if i click Select Process button its telling employee is not selected.. How make that Employee selection view visible in MSS..

This may be structural authorization issue. Execute RHBAUS00 for the user then check what happens.
Sandip

Hi, why is FCP X stuttering and beach balling after I installed 10.1 and 10.1.1? Not all and admittedly the heavy file sizes of which the project consists, but it wasn't doing this before hand. Also, WHERE is the "switch to proxy" button for playback?

Thank all, BTW.

If you have a lot of files in one library, create a new library for the project you're working on.
The Proxy selection is now in Viewer Display options.

ITunes for Windows 7 64 bit, Windows Live Mail Contacts not (all?) syncing

I have researched this as much as I can but cannot find a solution.
I had my iPhone 4 synced to my Window Vista Home Premium PC using iTunes just fine until January when the PC motherboard crashed. No data was lost and all contacts have been restored to my new PC with is Windows 7 Home Premium (64 bit). My contacts are in Windows Live Mail (Windows Contacts) and I'm syncing via iTunes with "Sync Contacts with: Windows Contacts" selected.
However, not all contacts are syncing with my iPhone. In fact, I'm not sure they are syncing at all, although the sync function goes through. It may be that the only ones that sync are those that existed before the new PC (i.e., the Windows Vista contacts which were in Windows Mail). I have created new contacts on both the PC using the new version Windows Live Mail and on the iPhone since the crash, and would like to get them synced up.
Symptoms:
1) Some specific contacts on PC are not on the iPhone after multiple sync attempts.
I have so far positively identified one contact that did not sync. It shows in Windows Live Mail under Contacts, however it does NOT show up in my Windows username/Contacts folder!
2) One Contacts group on PC is not on the iPhone, although two others are (they probably were from before the crash).
I have so far positively identified one group that did not sync. It shows in Windows Live Mail under Contacts groups, however it does NOT show up in my Contacts folder as a .group file!
3) The same group as #2 also does NOT show up in the iTunes group list under "Selected Groups" on iTunes, but the other two groups do. (I do not use "selected groups" because that disables "all contacts" syncing, but the groups are visible grayed out on the list.)
4) As a test, I created a new contact on my iPhone, synced, and it shows up now in Windows Live Mail Contacts; it also shows up in my Windows username/Contacts folder.
5) As a test, I created a new contact in Windows Live Mail and it does NOT show up in my username/Contacts folder. I synced the iPhone again and it does NOT show up on my iPhone contacts.
OK folks, where are these missing contacts going and how can I get them synced?? Thanks!
PS: I have the latest iTunes 10.5.3.3, no updates are available. However, Apple Support/iTunes seems to suggest Windows 7 64 bit either "does not use Windows Contacts" (which seemed quite wrong until I ran the tests above), and also that Windows 7 64 requires iTunes 10.4.1, which I cannot install because I have a later version installed. I would have assumed the correct version installed for my OS when I installed iTunes on the new PC. iTunes runs fine by itself and in coordination with my iPhone other than the above issue.
PPS: This site seems potentially relevant, however is highly technical: http://liveunplugged.wordpress.com/2011/02/04/windows-live-mail-contacts-databas e/
but doesn't help with this problem.

I didn't get any help on this from the forum, but from studying around and experimenting with different approaches, I have come up with the following conclusions:
Under Windows Vista, Windows Mail synced its contacts with Windows Contacts [which are in c:\users\username\contacts]. iPhone via iTunes synced with Windows Contacts. Changes to either Windows Mail Contacts or iPhone contacts would always update each other. Life was good.
Under Windows 7, Windows LIVE Mail (WLM) does NOT sync its contacts with Windows Contacts. It puts them into a hidden database. If you have prior Windows Contacts and brought them along for the ride, they are still there in the folder but they are not connected to the WLM contacts database
When you first set up Windows Live Mail, you can import your Windows Contacts and they appear to be synced. (In fact, they are, but only at that single point in time.)
If you change any Windows Live Mail contact or add a new one, it does NOT change in Windows Contacts. It only changes in the WLM contacts database. It therefore does NOT sync to your iPhone.
Similarly, if you change a contact on iPhone or add a new one, it will sync with Windows Contacts. However, this does NOT update your Windows Live Contacts.
So, from what I can tell, here is what this means: to maintain a steady state, you have two choices:
Whenever you update or add a contact, add it in either iPhone or Windows Contacts [the Windows Contacts folder has a "New Contact" button], and they will stay in sync with each other. Then manually update or add it in Windows Live Contacts to keep those up to date so you can use them for e-mail. OR
Whenever you update or add a contact, add it in either iPhone or Windows Contacts, and they will stay in sync with each other. DO NOT manually update Windows Live Contacts, but realize they are not always up to date. If an address needed for an e-mail is not in there, manually retrieve it from your Windows Contacts or your iPhone and insert it into the e-mail. [Having done that, you can right click on the address in the e-mail and add it to your WLM contacts if you want.] Periodically, manually delete all of your Windows Live Mail Contacts and then re-import your Windows Contacts into Windows Live Mail and, voila, your contacts are in sync again! (Isn't that great, I mean really awful??)
NOTE: If you follow course #2, DO NOT import your Windows Contacts into Windows Live Mail contacts without deleting your existing Windows Live Mail contacts, or you will end up with a double set plus the new ones.
FURTHER NOTE: I obviously can't make any guarantee you won't lose data if you follow course #2. Be sure you have a complete backup before deleting your WLM contacts. However, I will say that after experiencing a double set of WLM contacts (by failing to understand the first NOTE above), it was impossible to pick out the new items [WLM will now show you the date of entry or modification of the contact, so you can't sort by date], so I deleted all of them and re-imported my Windows Contacts and had a complete set again.
AND ONE FINAL NOTE: I have not tested how any of this affects Windows Live Contacts used online outside of Windows Live Mail, because I do not use Windows Live online.
Please post further comments if you have any more information on this topic.

Finder data not being written to .DS_Store file

The symptom of the problem I am experiencing is that the position of icons on my desktop (as well as icons in other folders in my home directory, as well as Finder window settings for folder in my home directory) are lost every time I log out. On a subsequent login, all of the icons "reflow" starting from the top right corner of the screen, just below the boot volume icon. I have been able to determine that this has to do with the .DS_Store file(s) in the Desktop folder and other folders of my home directory. If a .DS_Store file exists, the timestamp does not change when I change the icon layout and logout. If I delete the .DS_Store file, it is not re-created.
In my case, my home directory (and the child Desktop folder) is being mounted off an SMB share on a Windows 2003 server. My Mac is using AD authentication to the same Windows 2003 server, which is the domain controller. I'm logging in with my AD credentials, and my home directory mapping is picked up from the home directory field in AD.
Now, Googling this problem, I found a lot of people complaining about wanting to suppress the use/creation of the .DS_Store files on Windows network volumes. This led to an Apple KB article (http://support.apple.com/kb/HT1629) on how to modify a default to prevent the creation of .DS_Store files on network volumes--essentially the very behavior I am experiencing. The upshot of the KB article is to us the following command in terminal:
*defaults write com.apple.desktopservices DSDontWriteNetworkStores true*
I did a 'defaults read' to confirm this default isn't set on my install of Mac OS X 10.5.6--and it isn't. I then tried using the following variation in the hope I could force the behavior I wanted:
*defaults write com.apple.desktopservices DSDontWriteNetworkStores false*
Predictably, this had to effect.
The upshot is, NONE of the Finder data for files and folders in my home directory (icon positions, Finder view window defaults, etc.) is preserved between logons. And this is driving me nuts! I've spent several hours over the past two evening trying to troubleshoot this, and I've had no luck.
As a footnote, I'll mention that if I drag a folder from my home directory onto the local hard disk, the .DS_Store file is created/updated and things behave as expected (icon position and Finder window defaults are preserved). But, if I then drag the folder back over to my home directory, the values in the .DS_Store file become "frozen" and don't change.

Hey, try this:
1.
Put a file in a folder on your Desktop.
Edit: not your Desktop, but rather a typical local home on an HFS+ volume ~/Desktop
2.
Use "Get Info" to add a "Comment".
The comment can be up to somewhere between 700 and 800 characters.
3.
Copy the folder to a FAT formatted flash drive, SMB share, etc.
4.
Create a new folder on the flash drive.
5.
Move the file from the first folder to the second folder.
Confirm that the "Finder" shows the comment to be there.
6.
Quit the "Finder" - in 10.4 and earlier, this action would ensure that all .DS_Store files get updated, including transfer of comments. I.e. don't "relaunch" or "kill", etc. Enable and user the "Quit" menu, or use:<pre>
osascript -e 'tell application "Finder" to quit</pre>
7.
Now where's the comment?
In step 2, you could also have just created a file on the non-HFS volume and wasted your time typing in a 700 character comment.
In step 6, a more real-world scenario is ejecting the drive or logging out, but deliberately quitting the "Finder" is the most conservative way to ensure that changes get written to .DS_Store files and comments survive. In 10.5.6, even under these conditions, comments are lost.
Icon positions and view preferences are one thing, but with comments - that's real user-inputted data that Apple is playing fast and loose with. And if they no longer support comments on non-HFS volumes, the "Finder" shouldn't be showing you the comments when you double-check them in step 5, or allow them to be added in the alternate version of step 2.
..."C'mon Apple... what gives here?"...
Unfortunately, this "Discussions" site is not frequented by Apple devs. Have you considered filing a bug report? I wonder what they would tell you, eg. if the treatment of .DS_Store files actually does turn out to be a bug or is intentional as it suspiciously seems...
http://developer.apple.com/bugreporter/index.html

LR4.4 - Library filter by keyword - unable to select keyword.

Lightroom version: 4.4 [891433]
Operating system: Windows 7 Home Premium Edition
Version: 6.1 [7601]
Application architecture: x64
System architecture: x64
Logical processor count: 4
Processor speed: 2.6 GHz
Built-in memory: 6087.8 MB
Real memory available to Lightroom: 6087.8 MB
Real memory used by Lightroom: 523.6 MB (8.6%)
Virtual memory used by Lightroom: 551.5 MB
Memory cache size: 1012.7 MB
Maximum thread count used by Camera Raw: 2
System DPI setting: 106 DPI
Desktop composition enabled: No
Displays: 1) 1600x900
If I am in Library module, select filter Metadata, select Keywords from dropdown (no other filter panels selected), and start to scroll down the list of keywords, I can select keywords by mouseclick, and see the matching photos as thumbs in the main window.
However as I scroll further down, I can no longer select keywords - the mouseclick no longer highlights or selects. This happens rather incosnsistently - by which I mean, the point in the eyword list where the select stops working is not always the same place in the keyword list.
If I click several times on the same non-selecting keyword, LR4.4 jumps to taking 50% (exactly) of processor time (shown in task manager) , and the memory usage climbs steadily until all free RAM is consumed.
This is a small (~8000 image) catalogue, with ~2500 keywords, entirely non-hierarchical.
The catalogue is set to optimise on backup, weekly.
I've tried deleting and recreating the preferences file btw to no avail

LR on Windows starts choking when you have more than about 1500 keywords. It's a longstanding bug from at least LR 3 that still isn't fixed in LR 5 (hard to believe, but true).
Please add your vote to this official bug report:
http://feedback.photoshop.com/photoshop_family/topics/i_cannot_access_the_whole_keyword_li st_to_edit
That thread also has a couple of workarounds.

Why does my cursor not automatically select the entire word when I try to select text by starting/ending in the middle of a word?

In any other browser I've used (or word processor, for that matter) when I select text using my mouse cursor, if I start and/or end in the middle of a word, it automatically selects the whole word when I'm selecting more than one word. But for some reason this is not happening in Firefox. If I try to select say 3 words, and I start in the middle of the first word and end in the middle of the last word, it will only select those parts, not all 3 words entirely.

Firefox allows to select part of a word. You can select a word with a double click and use Shift + left click to set the end of the selection, so you need to click at the end of the last word instead of in it.

Play adds all listed songs to "Selected Mus

I just purchased a Vision:M. When I go to "All Tracks", highlight a song, and select "Play" from the context menu, ALL the songs are put in the "Selected Music" list. Same goes for "Album", or any other place I select an individual song from, all songs that are listed at the time I go to the context menu and select "Play" are put in the "Selected Music" list. I have cleared the list several times. This is my second player. I returned the first I purchased, as support deemed this behaviour incorrect and loading the new firmware did not fix it. I loaded nothing in the second player, and checked for this issue right out of the box, and the problem is still there. Am I missing something? Anyone else have this problem?

Dear Creative GUI guys, please change "Play" to "Play All", or something that indicates the context menu action works on more than the highlighted item. If you are in any given program, highlight a row from like items, and clicked "Delete", you are expecting what? Better yet, leave the context menu text description as "Play", but change functionality so that only the hightlighted song is put in "Selected" list, and not all gazillion songs when in "All Tracks".

Selected Keywords do NOT all get written to selected files. bug

Similar Messages

Maybe you are looking for