Selecting Two tables

Hi everybody...
I need selet data from 2 tables VBAP and VBAK.which am doing succesfully into internal table it_vbak and it_vbap.But i need to give both the tables data into it_final which am doing like below.But the problem is all the data is selected twice.Please help.
FORM populate_it_final .
LOOP at it_vbak.
LOOP at it_vbap.
clear it_final.
it_final-vbeln = it_vbak-vbeln.
it_final-netwr = it_vbak-netwr.
it_final-ernam = it_vbak-ernam.
it_final-audat = it_vbak-audat.
it_final-bstnk = it_vbak-bstnk.
it_final-auart = it_vbak-auart.
it_final-matnr = it_vbap-matnr.
it_final-posnr = it_vbap-posnr.
it_final-werks = it_vbap-werks.
APPEND it_final.
endloop.
endloop.
endform.
With Regadrs
Vijay

Use read statement on VBAP table inside the loop of VBAK and pass data to final internal table.
FORM populate_it_final .
SORT IT_VBAP BY VBELN.
LOOP at it_vbak.
Read table it_vbap into wa with key vbeln = it_final-vbap binary search.
if sy-subrc = 0.
it_final-vbeln = it_vbak-vbeln.
it_final-netwr = it_vbak-netwr.
it_final-ernam = it_vbak-ernam.
it_final-audat = it_vbak-audat.
it_final-bstnk = it_vbak-bstnk.
it_final-auart = it_vbak-auart.
it_final-matnr = wa_vbap-matnr.
it_final-posnr = wa_vbap-posnr.
it_final-werks = wa_vbap-werks.
APPEND it_final.
clear it_final.
endif.
endloop.
endform.
Regards,
Satish
Message was edited by:
Satish Panakala

Similar Messages

To Select the data from two table one is transp table and onther is cluster

Hi All,
I want to select the data from two tables
Here i am giving with an example.
Fileds: kunnr belnr from bseg. table bseg
fields: adrnr from kna1     table: kna1.
Know i want to put these into one internal table based on kunnr and belnr.
Thanks in advance.
Ramesh

Hi,
   U cant use joins on cluster table and BSEG is a cluster table so use FOR ALL ENTRIES for taht
refer this code
*&      Form sub_read_bsak
      text
--> p1        text
<-- p2        text
FORM sub_read_bsak.
*--Select data from BSAK Table
SELECT lifnr
         augdt
         augbl
         gjahr
         belnr
         xblnr
         blart
         dmbtr
         mwskz
         mwsts
         sgtxt
         FROM bsak
         INTO CORRESPONDING FIELDS OF TABLE it_bsak
         WHERE belnr IN s_belnr
         AND   augdt IN s_augdt.
IF sy-subrc EQ 0.
*--Sort table by accounting document and vendor number
    SORT it_bsak BY belnr lifnr.
ENDIF.
ENDFORM.                    " sub_read_bsak
*&      Form sub_read_bseg
      text
--> p1        text
<-- p2        text
FORM sub_read_bseg.
IF NOT it_bsak[] IS INITIAL.
*--Select data from BSEG table
    SELECT belnr
           gjahr
           shkzg
           kostl
           hkont
           ebeln
           ebelp
           FROM bseg
           INTO CORRESPONDING FIELDS OF TABLE it_bseg
           FOR ALL ENTRIES IN it_bsak
           WHERE belnr EQ it_bsak-belnr
           AND   gjahr EQ it_bsak-gjahr
           AND   shkzg EQ 'S'.
    IF sy-subrc EQ 0.
*--Sort table by accounting document
      SORT it_bseg BY belnr.
    ENDIF.
ENDIF.
ENDFORM.                    " sub_read_bseg

Need of SQL query in selecting distinct values from two tables

hi,
I need a query for selecting distinct values from two tables with one condition.
for eg:
there are two tables a & b.
in table a there are values like age,sex,name,empno and in table b valuses are such as age,salary,DOJ,empno.
here what i need is with the help of empno as unique field,i need to select distinct values from two tables (ie) except age.
can anybody please help me.
Thanks in advance,
Ratheesh

Not sure what you mean either, but perhaps this will start a dialog:
SELECT DISTINCT a.empno,
                a.name,
                a.sex,
                b.salary,
                b.doj
FROM    a,
        b
WHERE   a.empno = b.empno;Greg

Select from two tables and insert into a third

I'm trying to do a select from two tables and do an insert into a third table from the two resulting columns.
I have the following....
DECLARE
tempsid number;
temphostid number;
BEGIN
select "DBSID_ID","ID" into tempsid,temphostid from "DBSIDS","SERVERS"
where "HOST_SID" like '%'||"DBSID_NAME"||'%'
and "HOST_NAME" not like 'vio%'
and exists (select "DBSID_NAME" from DBSIDS)
order by "DBSID_NAME";
insert into "DBSID_LOOKUP" ("SIDLOOKUP_ID", "SERVERLOOKUP_ID")
values(tempsid, temphostsid);
END;
run;
I get the error ....
ORA-06550: line 11, column 18:
PL/SQL: ORA-00984: column not allowed here
ORA-06550: line 10, column 1:
PL/SQL: SQL Statement ignored
1. DECLARE
2. tempsid number;
3. temphostid number;

okay ... I tried a different way ...
DECLARE
a number;
b number;
BEGIN
select "DBSID_ID","ID" into a,b from "DBSIDS","SERVERS"
where "HOST_SID" like '%'||"DBSID_NAME"||'%'
and "HOST_NAME" not like 'vio%'
and exists (select "DBSID_NAME" from DBSIDS)
order by "DBSID_NAME";
insert into "DBSID_LOOKUP" (SIDLOOKUP_ID, SERVERLOOKUP_ID) values (a, b);
END;
and now it whines about ...
ORA-01422: exact fetch returns more than requested number of rows

How do you Select data from two tables with similar data amd merge the output together.

I have two Tables containing Sales Data. I want to read the Table a sort by date and accumulate dollars by order date. Then I want to read the second table and accumulate these dollar amounts by date and then merge the records together so that I gave 1 row
with amounts for type A and amounts for type b.
Here are the tables I am looking at.
Select Cast(J.Order_Date As Varchar(11))) As [Order Date]
          ,Sum(Case when Sales_Code like '%Comm%' then (J.Order_Quantity * J.Unit_Price) Else 0 end) As Decimal(11,2) As [Job Comm]
          ,Sum(Case when Sales_Code = '5-Day' then (J.Order_Quantity * J.Unit_Price) Else 0 end) As Decimal(11,2) As [Job Auto]
          ,Sum(Case when Sales_Code like '%Auto%" then (J.Order_Quantity * J.Unit_Price) Else 0 end) As Decimal(11,2) As [Job Auto]
          ,Sum(Case when Sales_Code = '' then (J.Order_Quantity * J.Unit_Price) Else 0 end) As Decimal(11,2) As [Job Fixed]
          ,Sum(Case when Sales_Code = 'XX' then (J.Order_Quantity * J.Unit_Price) Else 0 end) As Decimal(11,2) As [SO Comm)
          ,Sum(Case when Sales_Code = 'YY' then (J.Order_Quantity * J.Unit_Price) Else 0 end) As Decimal(11,2) As [SO Auto)
          ,Sum(Case when Sales_Code = 'ZZ' then (J.Order_Quantity * J.Unit_Price) Else 0 end) As Decimal(11,2) As [SO Fixed)
from [PRODUCTION].dbo.Job As J
union all
Select Cast(SH.Order_Date As Varchar(11))) As [Order Date]
          ,Sum(Case when Sales_Code like '%Comm%' then SD.Ext_Amt Else 0 end) As Decimal(11,2) As [SO Comm]
          ,Sum(Case when Sales_Code = '5-Day'     then SD.Ext_Amt Else 0 end) As Decimal(11,2) As [SO Auto]
          ,Sum(Case when Sales_Code like '%Auto%" then SD.Ext_Amt Else 0 end) As Decimal(11,2) As [SO Auto]
          ,Sum(Case when Sales_Code = ''          then SD.Ext_Amt Else 0 end) As Decimal(11,2) As [SO Fixed]
          ,Sum(Case when Sales_Code = 'XX' then SD.Ext_Amt Else 0 end) As Decimal(11,2) As [Job Comm)
          ,Sum(Case when Sales_Code = 'YY' then SD.Ext_Amt Else 0 end) As Decimal(11,2) As [Job Auto)
          ,Sum(Case when Sales_Code = 'ZZ' then SD.Ext_Amt Else 0 end) As Decimal(11,2) As [Job Fixed)
from [PRODUCTION].dbo.SO_Detail As SD
Inner Join [PRODUCTION].dbo.SO_Header As SH
    on SD.Sales_Order = SH.Sales_Order
Group by J.Order_Date
Order by J.Order_Date Desc
Looking for output like
Order Date   Job Comm   Job AUto   Job Fixed    SO Comm SO AUto SO Fixed
Mar-11-2014    100.00     250.00       50.00     200.00   300.00    400.00
Mar-10-2014    500.00     340.00        0.00     110.00   400.00    500.00
Mar-09-2014    600.00     333.00       56.00     210.00   500.00    300.00
Thanks for your help
SWProduction

Seeing the output it looks like what you need is this
select COALESCE(p.[Order Date],q.[Order Date]) AS [Order Date],
COALESCE([Job Comm],0) AS [Job Comm],
COALESCE([Job AUto],0) AS [Job AUto],COALESCE([Job Fixed],0) AS [Job Fixed],COALESCE([SO Comm],0) AS [SO Comm],COALESCE([SO AUto],0) AS [SO AUto],COALESCE([SO Fixed],0) AS [SO Fixed]
from
Select Cast(J.Order_Date As Varchar(11))) As [Order Date]
,Sum(Case when Sales_Code like '%Comm%' then (J.Order_Quantity * J.Unit_Price) Else 0 end) As Decimal(11,2) As [Job Comm]
,Sum(Case when Sales_Code = '5-Day' then (J.Order_Quantity * J.Unit_Price) Else 0 end) As Decimal(11,2) As [Job Auto]
,Sum(Case when Sales_Code like '%Auto%" then (J.Order_Quantity * J.Unit_Price) Else 0 end) As Decimal(11,2) As [Job Auto]
,Sum(Case when Sales_Code = '' then (J.Order_Quantity * J.Unit_Price) Else 0 end) As Decimal(11,2) As [Job Fixed]
,Sum(Case when Sales_Code = 'XX' then (J.Order_Quantity * J.Unit_Price) Else 0 end) As Decimal(11,2) As [SO Comm)
,Sum(Case when Sales_Code = 'YY' then (J.Order_Quantity * J.Unit_Price) Else 0 end) As Decimal(11,2) As [SO Auto)
,Sum(Case when Sales_Code = 'ZZ' then (J.Order_Quantity * J.Unit_Price) Else 0 end) As Decimal(11,2) As [SO Fixed)
from [PRODUCTION].dbo.Job As J
)p
full join
Select Cast(SH.Order_Date As Varchar(11))) As [Order Date]
,Sum(Case when Sales_Code like '%Comm%' then SD.Ext_Amt Else 0 end) As Decimal(11,2) As [SO Comm]
,Sum(Case when Sales_Code = '5-Day' then SD.Ext_Amt Else 0 end) As Decimal(11,2) As [SO Auto]
,Sum(Case when Sales_Code like '%Auto%" then SD.Ext_Amt Else 0 end) As Decimal(11,2) As [SO Auto]
,Sum(Case when Sales_Code = '' then SD.Ext_Amt Else 0 end) As Decimal(11,2) As [SO Fixed]
,Sum(Case when Sales_Code = 'XX' then SD.Ext_Amt Else 0 end) As Decimal(11,2) As [Job Comm)
,Sum(Case when Sales_Code = 'YY' then SD.Ext_Amt Else 0 end) As Decimal(11,2) As [Job Auto)
,Sum(Case when Sales_Code = 'ZZ' then SD.Ext_Amt Else 0 end) As Decimal(11,2) As [Job Fixed)
from [PRODUCTION].dbo.SO_Detail As SD
Inner Join [PRODUCTION].dbo.SO_Header As SH
on SD.Sales_Order = SH.Sales_Order
Group by J.Order_Date
)q
on p.[Order Date] = q.[Order Date]
Order by COALESCE(p.[Order Date],q.[Order Date]) Desc
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Select data from two tables...!

HI Experts...!
i m a beginner user and i want to select data from two tables proj and prps.....using joins.....and internal tables i have written a code...
SELECT prps~pspnr
       prps~objnr
       prps~psphi
       proj~ernam
       proj~erdat
       proj~pspnr
INTO table itab   -
itab is internal table
FROM prps inner join proj
WHERE pspnr in p_no and prpspsphi = projpspnr.
but there is error in from clause ..please help me....
Advance thanx....

Hi,
check the sample code bellow above two reply will solve out your problem but one more extra line in your code pointed out bellow.
TABLES: prps, proj.
TYPES: BEGIN OF ty_test,
        pspnr LIKE prps-pspnr,
        objnr LIKE prps-objnr,
        psphi LIKE prps-psphi,
        ernam LIKE proj-ernam,
        erdat LIKE proj-erdat,
        END OF ty_test.
DATA: itab TYPE STANDARD TABLE OF ty_test WITH HEADER LINE.
SELECT-OPTIONS: p_no FOR prps-pspnr.
SELECT prps~pspnr
        prps~objnr
        prps~psphi
        proj~ernam
        proj~erdat
*        proj~pspnr " No need for this you have selected this in
*     the first line because it is commone so you only need to select from any one
        INTO TABLE itab
FROM prps INNER JOIN proj ON ( prps~pspnr = proj~pspnr )
WHERE prps~pspnr IN p_no.
Best Regards,
Faisal
Edited by: Rob Burbank on Dec 24, 2009 12:24 PM

How to adjust placement of two tables in webi depending on the rows selection

Hi,
I have a webi which has two tables. The prompts are on dates. As per requirement sometimes user selects one date or sometimes a range of dates.
When One date is selected it works fine but when multiple dates are selected tables overlap each other. I can not place them side by side.
Any idea how can I adjust?
Regards
Prashant

Create two different section for each table in the report to avoid overlapping.
For example :
Section 1 - > table 1
Section 2 -> table 2
Regards,
Pranay

Selecting from two tables and confirming from them despites they not relate

Please I need a query to select from two tables that are not related to each other.
I also want to confirm data's as in verify wether what the user has entered is in accordance with what is in the tables
Examples
the first table is named "Card" and the second table is named "Student_Details"
Card table contains a column named "Pin_Number".
The Student_Details table contains fields such as Exam_Number, Name, Age, Sex.
The user has to Enter the Pin_Number which has to be confirmed in the Card table and Exam_Number which has to be confirmed in the Student_Details table and verify that both data's are correct.
Please I need the SQL and PL/SQL queries for this problem.
Thanks

Hi,
I think you need two different queries
You can write a procedure like:
create or replace procedure p1 (p_pin_number number, p_exam_number)
is
r_card_row            card%rowtype;
r_student_details     student_details%rowtype;
cursor c1 is
select *
    from card
   where pin_number = p_pin_number;
cursor c2 is
select *
    from student_details
   where exam_number = p_exam_number;
begin
open c1;
    loop
      fetch c1 into r_card_row;
      exit when c1%notfound;
      .... do whatever you want..... and the samething you can do with other cursor
    end loop;
close c1;
end p1;Hope this helps
Ghulam

Selecting from two tables but making it just one selection

Is there a way to select from two tables and just have one selection appear?
Specifically I have a fact_install_unit, and a fact_install_arch table.
Sometimes the value exists in fact_install_unit.factory_timestamp, and sometimes when fact_install_unit.factory_timestamp is null I need to pull it from the fact_install_arch.factory_timestamp.
sort of like:
(select fact_install_unit.factory_timestamp
from fact_install_unit, fact_install_arch
where fact_install_unit.fl_unit_sak = fact_install_arch.fl_unit_sak
and where fact_install_unit.factory_timestamp is null then display fact_install_arch.factory_timestamp)

> I was just stating that I do not have sufficient priveleges to create views in this database.
>
nm means "no more" than that
And how are we supposed to know that? You seem to have changed the thread subject to "unfortunately I only have read-only and insufficient priveleges", which is not even a question.
nm means "New Mexico":
http://www.myshortpencil.com/schooltalk/messages/85/515.html?971794944

Can i select Records from two tables into an itab.

Hi,
    Suppose that i have two tables spfli and sflight.
    Now i want the records from both the tables into a single internal table.
    If so please let me know how this can be done.
    itab should consist of all the columns in sflight and spfli.
Regards,
Sai

Sai,
Yes u can do it using JOINs.
Use this link for ref
http://www.sap-img.com/abap/inner-joins.htm
INNER JOIN results are an intersection of the tables being joined where in only if both the tables havethe data the result is pused onto the result set.
WHERE as in LEFT OUTR JOIN you can push the data of the LEF T table on the resultset even when the join condition is not met.
The use is that you wantto have all the data that is there in left table and also the right table if the join condition is a success then right table fileds will have data else they are initial.
OUTJOIN's are used in MAINTENANNCE VIEWS, HELP VIEWS .
INNER JOINS are used DATABSE VIEWS.
Inner Join:-
SELECT pcarrid pconnid ffldate bbookid
INTO CORRESPONDING FIELDS OF TABLE itab
FROM ( ( spfli AS p
INNER JOIN sflight AS f ON pcarrid = fcarrid AND
pconnid = fconnid )
INNER JOIN sbook AS b ON bcarrid = fcarrid AND
bconnid = fconnid AND
bfldate = ffldate )
WHERE p~cityfrom = 'FRANKFURT' AND
p~cityto = 'NEW YORK' AND
fseatsmax > fseatsocc.
Left Outer Join
SELECT scarrid scarrname p~connid
INTO CORRESPONDING FIELDS OF TABLE itab
FROM scarr AS s
LEFT OUTER JOIN spfli AS p ON scarrid = pcarrid AND
p~cityfrom = 'FRANKFURT'.
Reward if helpful,
Karthik

Selecting data from two tables

I am trying to select data from two tables. The only problem that I am running into, is that i am only seeing results from my 'uploads' table. there is also a record in documents where user = 1 that should show up. here is my sql:
$userIDNum = 1;
$sql="Select *
from uploads, documents
WHERE uploads.user = documents.user AND uploads.user = $userIDNum
ORDER BY uploads.title ASC, documents.title ASC";

You'll need to explain a little more about your data and what you are trying to accomplish. Your current sql will select all columns from both the uploads and documents tables but only rows where the user id in both tables match, AND the user id equals 1. Is that not what you are seeing? Where's the code that outputs the results?

Select unique rows from two tables...

Hi,
I have two tables, replies1 and replies2.
SQL> desc replies
Name Null? Type
URN VARCHAR2(36)
ADDRESS VARCHAR2(18)
FILESIZE NUMBER
AS_NUM VARCHAR2(6)
SQL> desc replies2
Name Null? Type
URN VARCHAR2(36)
ADDRESS VARCHAR2(18)
AS_NUM VARCHAR2(6)
Both of the tables have no primary keys, but I have indixes on (urn, addrss) combination on both....
I am trying to select the unique rows with (urn, address) from replies2, and then find the matching size from replies...
I am using the following query:
select distinct replies2.urn, replies2.address, replies.filesize from replies2, replies where replies2.AS_NUM like 'XYZ' and replies.urn = replies2.urn;
I cannot figure out why it won't work. the way I understand it is that, distinct will give all distinct combination of all column names that follow, which is what I want...
I know it is wrong, because the query:
select count(*) from replies2 where AS_NUM like 'XYZ' returns less number of rows than the above query.
Any help would be greatly appreciated.
Thank you
Oz.

Thanks a lot Mohan for your reply.
urn is not a unique key. Several rows could have the same (urn, address) pair in both tables. What I want is retrieve all (urn, address) rows from one table, and find the size from the other table to make a (urn, address, size). I want all unique combinations of (urn, address) to appear in the output.
AS_NUM is an empty column in replies... It would've been a lot easier if it wasn't, since then I'll just say: select distinct urn, address, filesize from replies where AS_NUM like 'XYZ';
I will try your query though and let u know how it goes. It takes quite a while to run since my tables are huge.

Select Query Using Two Tables

Friends,
   I need to select some fields from two different tables which doesnot contain any field in common.How to Get this using a select query..
   But there is a field X in table 1 which is equalient to eight char of another field y in table 2.I tried using offset but it is giving error.
Thanks in Advance
Regards
Yamini

Hello,
You can use a subquery
SELECT * FROM SFLIGHT AS F INTO WA_SFLIGHT
    WHERE SEATSOCC < F~SEATSMAX
      AND EXISTS ( SELECT * FROM SPFLI
                    WHERE CARRID = F~CARRID
                       AND CONNID = F~CONNID
                       AND CITYFROM = 'FRANKFURT'
                       AND CITYTO = 'NEW YORK' )
      AND FLDATE BETWEEN '19990101' AND '19990331'.
WRITE: / WA_SFLIGHT-CARRID, WA_SFLIGHT-CONNID,
           WA_SFLIGHT-FLDATE.
ENDSELECT.
or simply query the first table and then the second table with select endselect.
select * from table a.
   select * from table b into output_table
                 where b-field1 eq a-field2.
endselect.
or read the data into one internal table loop at it and then query the other table.
Regards,
Shekhar Kulkarni

How to write select statement between two tables

hi,
i need to do comparision between two table for each records.ex:
table1:
regid            regno         ind
1                 1001
1                 1002
1                 1003
1                  1004
and table2:
regid           regno
1               1002
1                1005
i need to select first row from table and loop for values in second table, if the values found first record , the record must update 'yes' to ind, if not 'No'.
please help with this.
thanks in advance
raja

Hi Raja,
Do it like this. loop the first table and read the second table.
Use where condition to satisfy the conditions.
Or
In your select query use joins. Like this.
SELECT mara~matnr
       marc~werks
INTO   TABLE t_material
FROM   mara AS mara INNER JOIN marc AS marc
ON     maramatnr = marcmatnr
WHERE mara~mtart = p_mtart.
Instead of MARA and MARC here use your tables.
Much Regards,
Amuktha.

Selecting from two tables

I have two tables:
TABLE: users (user_is is primary key):
++++++++++++++++++++++++++++++++++++++
user_id     | username
1     | fazle
2     | newaz
3     | shaerul
4     | badsha
5     | mirmohsin
6     | mdmohsin
7     | shawkat
8     | ahsan
9     | admin
TABLE: key_movement_history (history_id is primary key, key_handover_user_id and     key_takeover_user_id links to users.user_id):
++++++++++++++++++++++++++++++++++++++++++++++++++
history_id     | handover_date     | key_handover_user_id |     key_takeover_user_id
1     | 2006-10-18 16:25:07     | 8               |      2
2     | 2006-10-18 17:03:09          | 2               |      8
3     | 2006-10-18 17:04:45     |     8               |     1
4     | 2006-10-18 17:28:35     |     1               |      8
5     | 2006-10-18 17:31:59          | 8               |      1
6     | 2006-10-19 19:04:02          | 1               |     8
What is want is:
TABLE 3:
++++++++
handover_date     | key_handover_username | key_takeover_username
2006-10-18 16:25:07     | ahsan     | newaz
2006-10-18 17:03:09     | newaz          | ahsan
2006-10-18 17:04:45     | ahsan          | fazle
2006-10-18 17:28:35     | fazle          | ahsan
2006-10-18 17:31:59     | ahsan          | fazle
2006-10-19 19:04:02     | fazle          | ahsan
Could anyone please tell me the select statement?
I tried
SELECT key_movement_histories.handover_date, users.username, users.username FROM key_movement_histories, users WHERE users.user_id = key_movement_histories.key_handover_user_id and users.user_id = key_movement_histories.key_takeover_user_id;
but this did not work.
Thanks in advance.
Message was edited by:
user538091

sql>select * from t1;
    USER_ID USERNAME
    1 Fazle
    2 Nawaz
    3 Sherul
sql>select * from t2;
    HISTORY_ID DT HO_ID TO_ID
    1 06-oct-06 1 2
    2 16-oct-06 2 3
    3 26-oct-06 3 1
sql>select t2.history_id,t2.dt,
       t11.username ho_user,t12.username to_user
    from t1 t11,t1 t12,t2
    where t11.user_id = t2.ho_id
    and t12.user_id = t2.to_id;
    HISTORY_ID DT HO_USE TO_USE
    1 06-oct-06 Fazle Nawaz
    2 16-oct-06 Nawaz Sherul
    3 26-oct-06 Sherul Fazle
jeneesh

Selecting Two tables

Similar Messages

Maybe you are looking for