Selecting users for Conferencing

I am still getting used to Novell teaming and I was wondering how you can select users for a conference? I read through the documentation and it talks of selecting the users from the left hand side of the screen and starting a conference, however I am not able to see that selection. is there something I missed during the installation, or am I just overlooking something?
DS

Originally Posted by dschaldedfg
I am still getting used to Novell teaming and I was wondering how you can select users for a conference? I read through the documentation and it talks of selecting the users from the left hand side of the screen and starting a conference, however I am not able to see that selection. is there something I missed during the installation, or am I just overlooking something?
DS
When I look at a user I do not see anything under the Conferencing Name, and even though I have a couple of users logged in it seems that the user is still grayed out

Similar Messages

Select user for cam: no users in list

hey everyone i have setup flashmediaserver2 (win) and it
connects and all that, but users arent appearing in the select user
pulldown? i have opened the port and even exceptioned it but it
still wont work.. i followed all procedures needed services ports
edting of xml etc etc, the cams go on but users arent listed so i
am desperate for a solution... would love to get it to work asap,
any help would be appreciated, am i forgetting something?
it pings and all looks ok, but it aint working :(
Thanks in advance

well I can help you but you will need to upload the .fla to
me .......my email is [email protected] you may have to
zip the .fla to be able to upload it .........again my email is
calm_chess_player at the place that is hot........not sure if this
forum edits email addresses.

Can't select user for file sharing with windows

I'm trying to share my MBPr over my LAN with my windows 8 desktop. When i go to the file sharing options, under "Windows File Sharing" section, the user account i want to share (my main account) is greyed out, so I can not select it. The other user account is selectable though.
Any reason why I can't select my main account??

wow, is that all it took? I spent several hours on support chat who ultimately made me create a new user account and import all my old account data over to that one. It worked, but would have been way easier to just change the password. Oh well. It's fixed now...

Time Machine on my iMac won't open iPhoto. It goes to desktop screen automatically. When I select User/Picture/Iphoto library it only brings up the preview page with the size of the folder. I can't get into the library to look for lost photos.

Time Machine on my iMac won't open iPhoto. It goes to desktop screen automatically. When I select User/Picture/Iphoto library it only brings up the preview page with the size of the folder. I can't get into the library to look for lost photos.

Thank You. This helps me alot to get into the masters and to see events and photos in a utilitarian way, but it is not as easy as viewing the normal iphoto format to find photos. Can I do something else or did I not do something right to not see normal iphoto in Time Machine ?

Transaction SE16: Field selection (User-Specific Settings) is NOT working for ALL tables

Hi Guru’s,
I have an issue in Transaction SE16, Field selection (User-Specific Settings) is NOT working in Tables (ALL tables).
Following is the screenshot attached for your kind reference,
That is in the initial screen of transaction SE16 if I choose Filed Name or Filed Label only the technical details (Field Names) are appearing and not the descriptions like Client, Purchasing Doc, and Company Code Doc. Category Document Type etc…
Right now I am using ECC6 and EHP7 SAP system.
Please help me to resolve this issue by implementing any OSS note or User Role creations or any technical changes required in system.
Hope the requirement is clear and in case need any clarification please revert back.
NOTE: Right now in Development System we don’t have any successful user to compare the settings.
Regards,
Kumar.S

Thanks Patra.
Even I searched in SAP portal and couldn't able to find the relevant OSS note.
Following is my BASIS team response,
"Only you can view Table Field values from higher release"
Can you suggest / guide on this comment as well.
Looking forward to your speedy response.
Regards,
Kumar.S

User presses F4 on the selection screen for the field ''Transport Request"

Dear ALL,
                 I want to build up a functionality in my report where if the user presses F4 on the selection screen for the field ''Transport Request", then it will display all the Transport Requests involving that particular User...
What I mean is the normal process that is provided by SAP on saving an object in a package & assigning it to TR...
How do we Achieve it ?

Hi.
First we need to give the client after that client number related requestes display in second parameter F4 help for that purpose i used two function modules.First for read the client no dynamically after that pass the client number second function module.
then u can get all the request for that client.
DFIELD-FIELDNAME = 'P_MANDT'.
APPEND DFIELD.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
    dyname                               = 'Y9EZ_TR_COPYCLIENT'
    dynumb                               = SY-DYNNR
tables
    dynpfields                           = DFIELD
READ TABLE DFIELD INDEX 1 ."WITH KEY DFIELD-FIELDVALUE = 'P_MANDT'.
V_MANDT = DFIELD-FIELDVALUE.
CALL FUNCTION 'TR_F4_REQUESTS'
EXPORTING
IV_USERNAME                   = SY-UNAME
IV_TRKORR_PATTERN             =
IV_TRFUNCTIONS                =
   IV_TRSTATUS                   = 'RNDL'
IV_FROM_DATE                  =
IV_TO_DATE                    =
   IV_CLIENT                     = V_MANDT
IV_PROJECT                    =
IV_TITLE                      =
IV_VIA_SELECTION_SCREEN       = 'X'
IV_COMPLETE_REQUESTS          = 'X'
IT_EXCLUDE_REQUESTS           =
IMPORTING
   EV_SELECTED_REQUEST           = S_TRKORR-LOW.
ES_SELECTED_REQUEST           =
'TR_F4_REQUESTS' This function module for request
Regards
muralii

Need to give REVOKE CLOSE option in CO02 only for selective users

Hello,
Need to Restrict Revoke Close Option in Tcode CO02 (Under Functions - Restrict Processing - Revoke Close) through Role/Object Level. Can any one suggest how to control this . Need to give access for CO02 for 5 Users , but only 2 Users can able to do Revoke Close Option , other 3 Users should not able to do this activity.
BR,
Murali

There is no authorization object as B_USERSTAT_T , but there is a authorization object as B_USERSTAT . I tried to create a Temporary Role and manually assigned this Object . In this object there is no way to control REVOKE Close option .
But there is one way noted in Google to restrict Revoke Close option .
1.Goto BS22
2.Select the system status TEC0 (I0045) & just duble click it,
3.Maintain the Revoke technical completion (BUTA) =Forbidd (not allowed),
But if i set the above Parameter , this will restrict Revoke Option for all the users . I need to control ONLY for selective users . I can set some value in user data for those users , based on that i can write some coding to restrict , but i want to know where to write this code .... I tried in some area , but it never works.
Can any one give some idea to fix this issue.
BR,
Murali

GPO - Restricts the UI languages Windows should use for the selected user - not applying correctly on RDS 2012 R2

Hi All,
we have a Citrix XenApp 7.5 Farm with Windows Server 2012 R2 Servers and multiple (english, german, italian, spanish, french...) languages installed.
I've created a GPO with settings 'Restricts the UI languages Windows should use for the selected user' to for example 'German'.
Now when a user logs on to the server, the UI language is in german, but when i open Control Panel\Language: There is still English (United States) with Keyboard Layout: US, German.
It seems that the GPO is not changing all settings correctly to german.
Does anybody know what could be wrong?
best regards,
Siegmund

Hi Siegmund,
>>Now when a user logs on to the server, the UI language is in german, but when i open Control Panel\Language: There is still English (United States) with Keyboard Layout: US, German
Based on the description, the policy setting should have been applied successfully. Here, did we logged onto the server via remote desktop services? If yes, what's the keyboard layout on the computer we used to RDP to the server? Before going further,
I assume that this can be caused by Auto detect Remote Keyboard layout feature introduced since Windows Server 2008.
Regarding this point, the following artcile can be referred to for more information.
Windows 2008 R2 Language Bar keeps changing Keyboard Settings
http://www.microsoftpro.nl/2011/02/24/windows-2008-r2-language-bar-keeps-changing-keyboard-settings/
Note: For the above website is not hosted by Microsoft, the link may become invalid without notice and Microsoft doesn't guarantee the accuracy of the information.
In addition, the following thread can also be referred to for more information.
2008 R2 Session Host with MUI controlled via Group Policy
http://social.technet.microsoft.com/Forums/windowsserver/en-US/4e14955a-80f9-40aa-9741-fc8609f4ad09/2008-r2-session-host-with-mui-controlled-via-group-policy?forum=winserverGP
Best regards,
Frank Shen

DMS :Select Range for User defined fields in Classification Tab in CV04N

Dear All,
We have added User Define Fields Date field in Classification Tab in CV04N Transaction But it has single search (parameter) where we need to have Date range selection (Like Select Option) for the documents.
I request you to suggest me some solution whether it is possible to achieve with any standard configuration as it is very critical to the Business .
I would appreciate for your quick response and support.
Thanks in Advance,
Regards,
Vishal.

Dear Ravindra,
Actually My requirement is when we enter the exact date in the input field its giving the documents submitted on that date.But when i give date range its not displaying the any documents where the document submited in between those two dates.
Ex: I have submitted the document ( in CV01N ) for the approval on 10.05.2010(this is the same field in classification).
In the CV04N transaction ,classification tab if I enter date as 10.05.2010 its giving the document submitted on that date.but if I enter the two dates 01.05.2010 and 20.05.2010 where document is been created B/W the input dates.
Please suggest how to fulfill my business requirement ,I also request to check any configuration for the user defined fields can solve this problem instead of selecting single value when it can select the range of values.
Thanks for your earlier reply.
Regards,
Vishal.

How to add folder from KM content to Portal Favorites for selected users

Hi all,
I have cretaed a folder in KM content (In documents) for uploading implementation related ddocuments.
how to add this folder in "Portal Favorites" of selected users only.
Please guide.
Thanks in advance.

Hi,
well one way could be the following.
Go into KM-Content --> Repository "userhome" --> select the user you want --> navigate into his folder Favorites --> create a new internal link in this folder to the folder you want
In the favorites of the user there is now a link to the desired folder and after clicking a new window will be opened. You can copy this internal link to the favorites folder of the other users you want.
Regards
Alex
Edited by: Alexander Götz on Apr 16, 2009 5:12 PM

Disabling external sharing in OneDrive for Business for selected users

Hello,
I have a requirement to disable external sharing option in OneDrive for Business for a few user and allow external sharing for a selected users. Is this possible?
What I know is, we can enable or disable external sharing for all the users who use OneDrive for business by configuring Sharing option for My site collection at "xxx-my.sharepoint.com". But I want to know is if it is possible to handle this at
user level by doing changes to "xxx-my.sharepoint.com/personal/user_domain.com" site collection.
Thanks,
Lakshmi

Thanks Vasil for your reply. Yes, as you mentioned, removing edit option or admin access is not the right solution for my requirement. I just want to know why My site collection is tightly coupled with personal site collections. Many users will use OneDrive
to store data and share it with others internally and externally. So, as a security measure there should be some option to enable this only for a specific users. Hoping someone will give me idea to achieve this.

OIM11g R2 - If two roles (ACF2 and AD) are selected together for a user req

Hi ,
We are facing a problem In the Catalog, if two roles (ACF2 and AD) are selected together for a user and checking it out.The request goes to approval process.We have not created any approval process flow.
Plz let me know how to recover from it and provide an option to provision two roles simulaneously to a user without going into approval process.
Steps to Reproduce:
1. Create a user in OIM .
2. Search that user.Administration->Users->Search User
3. Click on 'Roles' tab and select 'Request Role' under that tab.
4.'Catalog' tab opens .Click on Search icon and Add AD and ACF2 Role to the cart.
5. Click on 'Check out'
6. Click on Submit button
7. Request Summary tab opens with Request status shown as 'Obtaining Request Approval' and Request Type as 'Assign Roles'.
Note: If we assign AD and ACF2 individually to user and running Evaluate User Policies we are able to see account in Provisioned state under Accounts tab of User and request is not going to approval process
Thanks in advance

Hi,
As mentioned I created two auto approval policies
1. Request Type= Assign Roles
Level= Request Level
Auto Approval checked
Approval Rule=Requester.UserLogin Equals XELSYSADM
(Created this rule as i am logeed in as XELSYSADM)
2. Request Type= Assign Roles
Level= Operation Level
Auto Approval checked
All Scope Checked
Approval Rule=Request.RequestType Equals Assign Roles
After that i opened the user request role page and requested 2 roles (AD and ACF2).
But now also request went to approval work flow
Please point which step i have missed or any other step need to be performed.
Regards,
Edited by: Puneet Lobana on Jan 7, 2013 12:54 AM

Do I can create a page who is locked just for selected user?

Do I can create a page who is locked just for selected user?

The manner how you put files on the server is unimportant.
It's the Webserver (usually Apache) itself that does the protecting.
So either use the control panel where you host your website, or use the method explained on the page I linked to.
Should look like this (on the left) :
Your visitor will see this :
http://home.wyodor.net/protect/
Use : root/root
Inside it looks like this :

Query to find out the time used by an user for an application

Hello All,
I want to know the query to find out the whole time used by the user for an application. Please view the below data
Employee:
SNO EMP_ID EMP_NAME EMP_DATE LOGIN_TIME LOGOUT_TIME
1 10 Visu 21-Nov-2010 06:30:00 07:30:00
2 10 Visu 21-Nov-2010 06:40:00 07:20:00
3 10 Visu 21-Nov-2010 06:50:00 07:50:00
4 10 Visu 21-Nov-2010 07:30:00 08:30:00
5 10 Visu 21-Nov-2010 09:30:00 10:30:00
By checking the above data we can say that the total time Visu used the application is
8.30 - 6.30 (From 1,2,3,4 records) = 2hrs
10.30 - 9.30 (Based on 5th rec) = 1hr
So the total time Visu used the application would be 3 hrs = 180 mins.
Could you please help me in getting the result from that data using a query?

odie_63 wrote:
I think it may be solved with analytics too.
with t1 as (
            select 1 sno,10 emp_id,'Visu' emp_name,'21-Nov-2010' emp_date,'06:30:00' login_time,'07:30:00' logout_time from dual union all
            select 2,10,'Visu','21-Nov-2010','06:40:00','07:20:00' from dual union all
            select 3,10,'Visu','21-Nov-2010','06:50:00','07:50:00' from dual union all
            select 4,10,'Visu','21-Nov-2010','07:30:00','08:30:00' from dual union all
            select 5,10,'Visu','21-Nov-2010','09:30:00','10:30:00' from dual
     t2 as (
            select emp_id,
                    emp_name,
                    emp_date,
                    to_date(emp_date || login_time,'DD-MON-YYYYHH24:MI:SS') login_time,
                    to_date(emp_date || logout_time,'DD-MON-YYYYHH24:MI:SS') logout_time
              from t1
     t3 as (
            select t2.*,
                    case
                      when login_time < max(logout_time) over(
                                                              partition by emp_id,emp_date
                                                              order by login_time
                                                              rows between unbounded preceding
                                                                       and 1 preceding
                        then 0
                      else 1
                    end start_of_group
              from t2
     t4 as (
            select t3.*,
                    sum(start_of_group) over(partition by emp_id,emp_date order by login_time) grp
              from t3
     t5 as (
            select emp_id,
                    emp_date,
                    min(login_time) login_time,
                    max(logout_time) logout_time
              from t4
              group by emp_id,
                       emp_date,
                       grp
select emp_id,
        numtodsinterval(sum(logout_time - login_time),'day') time_spent
from t5
group by emp_id
order by emp_id
    EMP_ID TIME_SPENT
        10 +000000000 03:00:00.000000000
SQL> SY.

Unable to select user when reconnecting mailbox

Hi there,
I am wondering if this is a bug or if anyone can help...
A user was accidentally deleted in AD. We recovered the user successfully and attempted to reconnect the user's mailbox.
When you reconnect, a dialog opens in which we are supposed to select the AD user to whom the mailbox will be connected.
Here is the problem:
(Windows 2003 Domain Controller, Exchange Server 2003 on same box)
When we type in the user's login (Dialog: Select a new user for this mailbox) and click check name it returns an error message saying it can't find it
(An object (User or Other object) with the following name cannot be found:"PatrickK" Check the selected object types and locations for accuracy and ensure that you have typed the object name correctly, or remove this object from the selection)
Now, this is a standard AD "can't find the user" message. This is despite the fact that we are selecting our domain. When we click advanced and search for all users and objects, the only objects that are returned are the users and groups of the local machine; not the domain. This occurs even when we select our domain as the object to search. It seems to ignore it and only search the local machine directory. The same occurs when we try to connect the mailbox to any account on our domain.
Is this due to Exchange and the Domain Controller being on the same box?
Any hints or comments appreciated.
Thanks!

Worked for me too. Also keeps all the permissions of users to the mailbox, but you have to add any extra email addresses back after removing exchange attributes, so make note of them when you delete attributes.
Thanks!

Selecting users for Conferencing

Similar Messages

Maybe you are looking for