Selection of Hierarchy for FS

Hello there,
 I am attempting to run Business Content Query: 0FIGL_VC1_Q0002 which is based on Virtual InfoCube: 0FIGL_VC1
I could successfully run Query: 0FIGL_VC1_Q0001(a separate query on this cube) and did receive the desired results.
However, when I run the Query: 0FIGL_VC1_Q0002 it does NOT give me any application(transaction)data
Hence, this query(0FIGL_VC1_Q0002) is actually based on the SAP supplied financial statement version Financial Statement (technical name INT)
However, I`d like to use my Financial Statement Item Hierarchy which is loaded to InfoSource : 0GLACCEXT
More specifically, let's look into SAP Standard Query Design of 0FIGL_VC1_Q0002
It consists of list of Key Figures in the ROW.
Right-Click on Result
 Edit Selection
 Under Financial Item Hierarchy, there is Hierarchy INT,
how can I change it to mine ?
 At the moment, I don`t seem to see any other hierarchy selection?
Message was edited with apologies by: John Mcluskey

John,
If in the BEx Query Designer in the FS item properties you clicked on a icon to the right from the hierarchy name field and couldn't see the other hierarchies, it means that you didn't upload hierarchy for 0GLACCEXT!
You wrote that loaded hierarchy to infosource!? The hierarchy should be loaded to 0GLACCEXT infoobject. Besides, you need to load texts for this IO.
Please describe what you've done in this regard so far. The more details the better.
Best regards,
Eugene

Similar Messages

BEx Selection screen Hierarchy display (text - key)

Hi,
We have a new query deployed that uses several hierarchies in the selection screen.
When running the reports, the drop down for the hierarchies on the variable selection screen displays the full text.
However, the users are more familiar with the key value and would prefer to see that. In the actual report, the keys are displayed.
I am trying to find where the default display can be set for the hierarchies on the BEx selection screen so I can show the key values?
Thanks!
Darryl
Edited by: Darryl Goveas on Nov 16, 2011 12:14 PM

Create a FM like below and a wrapper for it so you can call it as part of process chain; we load all of our hierarchies then call this:
FUNCTION ZBW_CHANGE_HIER_DISPLAYNAME.
""Local Interface:
*" EXPORTING
*"     VALUE(RETURN) TYPE BAPIRET2
data: hieid(25) type c,
        hienm(30) type c,
        lgtxt(60) type c.
RETURN-TYPE = 'I'.
RETURN-ID = '01'.
Select each hierarchy from list table
select nhieid nhienm t~txtmd
into (hieid, hienm, lgtxt)
from rshiedir as n
join rshiedirt as t
on nhieid = thieid
where n~objvers = 'A'
and   t~objvers = 'A'.
    if sy-subrc = 0.
    concatenate Key and Text
      concatenate hienm '-' lgtxt into lgtxt SEPARATED BY space.
    update table with new description
      update rshiedirt
      set TXTLG = lgtxt
      where langu = 'E'
      and hieid   = hieid
      and objvers = 'A'.
      if sy-subrc = 0.
        RETURN-NUMBER = '001'.
        RETURN-MESSAGE = 'Successfully updated Hierarchy Descriptions.'.
      else.
        RETURN-NUMBER = '002'.
        RETURN-MESSAGE = 'Error when updating Hierarchy Descriptions.'.
      endif.
    else.
      RETURN-NUMBER = '003'.
      RETURN-MESSAGE = 'Error when selecting Hierarchy Descriptions.'.
    endif.
endselect.

Select key date of time-dependent hierarchy before select a hierarchy node

Hello experts!
I have a Web Application which has a selection on 0ORGUNIT (organizational unit). The selection is on hierarchy nodes and the hierarchy is time-dependent.
Because of the time-dependency I have to give a key date for the hierarchy. But I want to select the key date at runtime/execution of the query and additionally I want to select the hierarchy node and other selection criterias.
Maybe there is a solution to get all this in one pop-up or maybe in two or another solution how I can implement this requirement.
Thanks for help!
Peter

Hey!
You don't have to use the same presentation-hierarchy like the selection-hierarchy is which you use for the variable. While presentation-hierarchy always has a key-date, the selection-hierarchy has none. So you see all values for selection but just this which are valid for the presentation-hierarchy are selected. And there is a warning which you can supress over RSRT.
This solution works for our problem, maybe not for yours, don't know.
Best regards,
Peter

Single hierarchy for multiple target systems

Hi,
I have a version named "Account" with a hierarchy named as "Acc2013".
the hierarchy "Acc2013" is same across Oracle EBS, Oracle Fusion GL, and HFM.
how can i assign multiple node types to the same hierarchy so that i just need to maintain one hierarchy (this case account hierarchy) and select the properties pertaining to each target system?
i.e. i select the Oracle GL from the drop down and give the details for the Oracle GL then i select the HFM category from the drop down and provide the HFM related properties.
the reason why i am asking is, if i dont give the node type, all the unnecessary properties are showing up for other type of hierarchies. for e.g. there is another hierarhcy named cost center there its showing the account related properties.
to summarize, how i can utilize a single hierarchy to be used for different target systems? Appreciate your help. do i need to create different version and hierarchy for different types of target systems?

I'm late to respond to this, but I always preach to customers that it is critical for DRM to act as an enterprise view. This isn't a "System A" hierarchy, or a "System B" hierarchy, but rather it's an asset that is shared by both systems, and therefore attributes for both systems are valid. Since node types provide the ability to hide properties, many interesting options present themselves, not all of which lead to a good outcome in the longer term. If a user doesn't ever want to see properties for a particular system, it would be better to just remove their access to that property category in many cases. (They may already have read only access but they object to "being bothered" with seeing those properties.)
I've seen many DRM implementations head down the other path and end up with duplicate maintenance requirements, configuration challenges, or even having to do major reengineering efforts to transition DRM from a Finance department tool into an enterprise use case feeding a data warehouse. A current customer of mine used a scheme where a checkbox on each property category would make the properties disappear if unchecked...this worked great with a handful of node types, but unfortunately the number of node types needed to support all of these property category combinations was bound by factorial math principles. Consequently the maintenance for this solution went from unweildy to unmanageable as more "non-HFM" data was added to DRM.
DRM implementations should be guided by governance principles and maintenance business rules, rather than than how things appear in DRM. It's how they appear when published that is of primary importance. I think the new features related to Data Governance will help greatly in this regard. Users that are overwhelmed by the DRM UI can easily be limited to the attributes that are relevant to their specific workflows, and only the "Power users" will see everything.

Error when charging hierarchy for infoObject hieracky for 0MATERIAL

Error when charging hierarchy for infoObject hieracky for 0MATERIAL from infosource 0MATERIAL_LKLS_HIER.
I have an issue when performing a charge of the material hierarchy for the 0MATERIAL InfoObject. The problem is that maybe there are some referential problem. I show you 2 images about that.
[http://bp1.blogger.com/_RnNmoD1OiLE/SE1AyQThUgI/AAAAAAAAAmU/PPp7Uwn22PI/s1600-h/ErrorCarga1.JPG]
[http://bp0.blogger.com/_RnNmoD1OiLE/SE1A6bGswnI/AAAAAAAAAmc/Gtvotn1nilI/s1600-h/ErrorCarga2.JPG]
Could please anyone give me a clue about what's my problem? All regs i'm trying to upload to my BW system give the same error. The datasource i'm using is 0MATERIAL_LKLS_HIER. As you can see, it has registers on it.
[http://bp2.blogger.com/_RnNmoD1OiLE/SE1BBvyBAOI/AAAAAAAAAmk/i2aXHvt8E7o/s1600-h/ErrorCarga3.JPG]
Any Idea? Thank-you!
Artur.
Edited by: Artur Rodriguez Coma on Jun 9, 2008 4:59 PM
Edited by: Artur Rodriguez Coma on Jun 9, 2008 5:00 PM

For this you can enter the screen of infoobject change and select the hierarchy tab at the bottom theres a button External Characteristic in Hierarchy ....there you can set other infoobjects that can be part of the hierarchy of your infoobject...
This is the procedure but you only can add infoobjects that attributes of the principal infoobject ....
I hope this helps
Regards

Search Hierarchy for All Enumerated Types

I have inherited a large hierarchy of code (about 1200 VI's) and am in the process of modifying it. Unfortunately the previous developers who have worked on the code either did not know about Type Definitions or chose not to use them for the challenge. I have updated an enumerated type and after poking around have found that there are many others like it peppered throughout the hierarchy that also need updating. Their names are similar but not necessarily the same, close enough that if I could search over all enumerated types in the hierarchy I chould most likely pick out the ones I need and dare I say replace them all with a single type defined enumeration. The problem is that I dont know how to search a hierarchy for all enumerated types, I see an option to search for all front panel terminals but the search quits after finding 2000 (not to mention that this enumeration will exist as control, constant or indicator). Anyone have any ideas?
CLA, CLED, CTD,CPI, LabVIEW Champion
Platinum Alliance Partner
Senior Engineer
Using LV 2013, 2012
Don't forget Kudos for Good Answers, and Mark a solution if your problem is solved.

Will S. wrote:
To help you with this, you can programmatically search your VIs to find the number of Enums you have in each. That might at least help you keep track of your changes. You could even make all of them blink so they are easy to find. For details on how to do this, see the following thread:
http://forums.ni.com/ni/board/message?board.id=170&message.id=359515&requireLogin=False
That will help you find them on the FP but not the block diagram.
For the BD this should work.
Just select the enum constant for the numeric palette.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Query for Supervisor Hierarchy for top most manager

Hi,
I have requirement where I have to start from one employee and move up to top-most supervisor of that employee:
For example starting from Employee ABC and moving to supervisor3 through supervisor hierarachy.
Employee ABC
Supervisor1*
Supervisor2*
Supervisor3*
Can anyone help me in constructing such query.
Regards,
Salman Ahmad

The linked query is to find a loop in the Supervisor hierarchy top down.
The SQL here will display the current supervisor hierarchy for a specified subordinate bottom to top.
select level, rpad(' ',level*2)||paa.person_id, pap.first_name, pap.last_name
from per_all_assignments_f paa
join per_all_people_f pap
on paa.person_id = pap.person_id
and sysdate between pap.effective_start_date and pap.effective_end_date
where sysdate between paa.effective_start_date and paa.effective_end_date
start with paa.person_id = :PersonID
connect by paa.person_id = prior paa.supervisor_id
and sysdate between prior paa.effective_start_date and prior paa.effective_end_date;

NW04s(SP7/FEP7)-Select Filter value for HIER in 3.XBexAnalyzer doesn't work

Hi,
We went live with SPS 7/FEP 7 and we are having problem in 3.X Bex Analyzer with "Select Filter Value" for charcteristic having active hierarchy(in this case it is using time dependent hierarchy). (For Eg: Organization Unit)
If I inactivate the hierarchy for organization unit at query level and then execute the query, then "select filter value" works for Organization Unit.
NOTE: I checked other query using hierarchy (not time dependent hierarchy) and I was able to do "select filter value"
Please let me know if any OSS note is available for this issue so that we can fix this issue in our Production Environment.
NOTE: The above issue works in SPS 8/FEP 802 with 3.X Bex Analyzer.
Thankyou,
-Sini
Message was edited by: Sini Kumar

Hi,
Did you have an asnwer to your problem?
We've a similar problem we had a technical upgrade to BI 7.0. But we still work with the frond end tools of 3.5.
When we select in the Bex analyzer a node in an hierarchy it shows the result, but if want to select an other node we must first remove the old filter. This wasn't when we're on the 3.5 enviroment.
Maybe if the problem is solved, this can help us.
Thanks in advance!
Regards,
Juriaan

Is it necessary to create info package for hierarchy for loading flatfile

is it necessary to create info package for hierarchy for loading flatfile or mantain hierarchy is sufficient for that please suggest

Hi,
there is two ways you can maintain hierarchy data in an master data.
you can manually maintain the data in an infoobject for hierarchy by selecting that particular infoobject and maintain master data option. here u won't need any infopackage creation.
but if you are loading through flat file means you have to create and maintain the path for flat file in infopackage maintenance.
hope this help you
Regards
Harikrishna N

Can not select external input for sound

can not select external input for sound

Hey there RoosterMonkey,
It sounds like you have Soundtrack Pro installed but you cannot select your external audio device as an input. I recommend the troubleshooting steps from the article named:
Soundtrack Pro 3: Troubleshooting Basics
http://support.apple.com/kb/ht3659
Update to the latest software versions
From the Apple () menu, choose Software Update and make sure that you have the most recent updates for your versions of Soundtrack Pro 3, QuickTime, Compressor, Pro Application Support, and other important system files. Installing the latest updates ensures that your software has the latest improvements and enhancements.
Note: Be sure the application is in the Applications folder and is named Soundtrack Pro before running Software Update.
Check compatibility and driver versions for third-party devices
If you're using a third-party sound card, MIDI interface, storage system, control surface, or plug-in, check the support area on the manufacturer's website to be sure that you're using the latest version of the relevant driver or other software for your product. For information on troubleshooting possible issues with Audio Unit plug-ins, go to Soundtrack Pro 3: Troubleshooting Audio Unit plug-in issues.
Try a different Multitrack Project or Audio File Project
Sometimes project files can become damaged, causing unexpected behavior in Soundtrack Pro. To create a fresh project, choose File, then New and select Multitrack Project or Audio File. Test to see if the issue is resolved in the new project.
Delete the User Preferences
You can resolve many issues by restoring Soundtrack Pro to its original settings. This will not impact your project files. To reset your Soundtrack Pro user preference settings to their original state:
Quit Soundtrack Pro if it is open.
In the Finder, choose Go > Go to Folder from the menu bar.
Type ~/Library/Preferences in the "Go to the folder" field.
Remove the "com.apple.soundtrackpro.plist" file from the Preferences folder.
In the Finder, choose Go > Go to Folder from the menu.
Type ~/Library/Application Support/Soundtrack Pro in the "Go to the folder" field.
Remove the "EffectsCache.plist" file from the Soundtrack Pro folder.
In the Finder, choose Go > Go to Folder from the menu.
Type ~/Library/Application Support/Soundtrack Pro/Layouts in the "Go to folder" field.
Remove the "Soundtrack Pro.saved.moduleLayout" file from the Layouts folder.
In the Finder, choose Go > Go to Folder from the menu.
Type ~/Library/Caches in the "Go to folder" field.
Remove the "com.apple.audiounits.cache" from the Caches folder.
Remove receipts and reinstall Soundtrack Pro 3 and Compressor
Another approach you might consider is reinstalling Soundtrack Pro and Compressor. To do this effectively, you need to remove the applications and their receipts, then install Soundtrack Pro and use Software Update to install additional updates. Compressor gets installed automatically when you install Soundtrack Pro. You don't have to remove everything that was installed with Soundtrack Pro, so follow the steps below to completely reinstall a fresh copy of Soundtrack Pro. Note: Make sure that you have your installation discs handy before beginning.
In Mac OS X v10.6 Snow Leopard or OS X Lion
Open the Terminal application and enter the following commands one at a time and an administrator password when prompted. Note: The commands are case sensitive.
sudo pkgutil --forget com.apple.pkg.Compressor
sudo pkgutil --forget com.apple.pkg.Qmaster
sudo pkgutil --forget com.apple.pkg.VideoOutSupport
sudo pkgutil --forget com.apple.pkg.PSTSharedA
sudo pkgutil --forget com.apple.pkg.AppleHDVCodec
sudo pkgutil --forget com.apple.pkg.AppleIntermediateCodec
sudo pkgutil --forget com.apple.pkg.DSPPublishing
sudo pkgutil --forget com.apple.pkg.SoundtrackPro
sudo pkgutil --forget com.apple.pkg.Uncompressed422
Then, reinstall Soundtrack Pro and Compressor using the following steps:
Open the Applications folder. Drag the Soundtrack Pro and Compressor applications to the Trash.
Insert your Logic Studio or Final Cut Studio installation disc and install Soundtrack Pro.
When finished installing, choose the Apple () menu, then Software Update to update your software to the latest version.
Open Soundtrack Pro to verify that the issue has been resolved.
Thank you for using Apple Support Communities.
Cheers,
Sterling

Sharepoint 2013: Problem / Error when creating Variation Hierarchy for French and German Languages from Variation root EN

Hi,
I have a website with English and Arabic Language Packs installed. I have the corresponding Variation heirachies created and the whole site collection is published.
Recently the client asked for french and german languages to be accomodated as well. So I followed the same approach I did for English and arabic (installed the language packs) for foundation, ran ocnfiguration wizard, installed server language pack &
ran configuration wizard.
But after creating the variation label, when i try to create the variation heirarchy, I am getting the following error.
"Unknown failure when creating a variation of page http://server:port/en/pages/default.aspx in label /fr/Pages/default.aspx.
The Variations Create Hierarchies job failed with the following error message& Unknown failure when creating a variation of site
http://server:port/en in label fr."
Am not sure what is going wrong. Appreciate a feedback.
Thanks,
SSP
SSP

Hi,
According to your description, my understanding is that the error occurred when you created the Variation Hierarchy for French and German Languages from Variation root EN.
I recommend to check the Resources folder located at C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15 to see if the file core.fr-FR.resx exists in the folder.
Here is a similar thread for you to take a look:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/611575b2-d129-44c6-814b-2e5782178850/unknow-failure-when-creating-variations-in-sharepoint-2013-is-this-a-bug-in-sharepoint-2013-rtm?forum=sharepointadmin
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Problem with "SELECT...FOR UPDATE OF..." and "POST command" combination

Problem with "SELECT...FOR UPDATE OF..." and "POST command" combination
Problem in committing transactions in Multiple Forms (Oracle Forms) with POST built-in command:
Consider that the following statements are written in WHEN-WINDOW-CLOSED trigger of a called form.
Statements in called form (Form name: FORM_CHILD):
go_block('display_block') ;
do_key('execute_query') ;
-- Data from table_b will be populated in this block, based on the value of COLUMN_1 obtained
-- from TABLE_A.
-- Example: If the value of COLUMN_1 is 10, then all the matching records from TABLE_B, which
-- are inserted with value 10 in TABLE_B.COLUMN_1 will be fetched and shown here.
if user_choice = 'YES' then
commit ;
else
rollback ;
end if ;
Statements in calling forms:
There are two calling forms having following statements and it is going to call the above said called form.
CALLING FORM 1
Statements in KEY-COMMIT trigger:
post;
call_form(form_child, no_activate) ;
Statements in ON-INSERT trigger:
select column_1
from table_a
for update of column_1
where column_2 = 'X' ;
update table_a
set column_1 = column_1 + 1
where column_2 = 'X' ;
insert into table_b ...;
insert into table_b ...; Statements in KEY-COMMIT trigger:
post;
call_form(form_child, no_activate) ;
CALLING FORM 2:
Statements in ON-INSERT trigger:
select column_1
from table_a
for update of column_1
where column_2 = 'X' ;
update table_a
set column_1 = column_1 + 1
where column_2 = 'X' ;
insert into table_b ...;
insert into table_b ...;
insert into table_b ...;
Our understanding:
Assume that both the forms are running from two different machines/instances, issuing commit at the same time. In this case, forms will start executing the statements written in ON-INSERT trigger, the moment POST command is executed. Though the commit is issued at the same time, according to oracle, only one of the request will be taken for processing first. Assume that calling form 1 is getting processed first.
So, it fetches the value available in COLUMN_1 of TABLE_A and locks the row from further select, update, etc. as SELECT...FOR UPDATE command is used (note that NOWAIT is not given, hence the lock will be released only when COMMIT or ROLLBACK happens) and proceed executing further INSERT statements. Because of the lock provided by the SELECT...FOR UPDATE command, the statements in calling form 2 will wait for the resource.
After executing the INSERT statements, the FORM_CHILD is called. The rows inserted in to TABLE_A will be queried and shown. The database changes will be committed when user closes the window (as COMMIT is issued in its WHEN-WINDOW-CLOSED trigger). Then the SELECT...FOR UPDATE lock will be released and calling form 2's statements will be executed.
Actual happenings or Mis-behavior:
Calling form 2 starts executing INSERT statements instead of waiting for SELECT...FOR UPDATE lock. Also, the value selected from TABLE_A.COLUMN_1 is same in both the calling forms, which is wrong.
The rows inserted into TABLE_B are having similar COLUMN_1 values in calling form 2 and they are fetched and shown in the called form FORM_CHILD.
Note that in calling form 2 also POST only is issued, but the changes posted there are accessible in calling form 1 also, which is wrong.
Kindly suggest us as to how to fix above problem. It will be much use, if you can send us the information regarding the behavior of Oracle Forms POST built-in also.
Our mail ID: [email protected]
Thanks a lot in advance.

You have several problems:
1. On-Insert will ONLY run if you have created a new record in a base-table block. If you haven't done that, then the POST command will not cause it to run.
2. Select for update without a "no wait" will lock records for the first form, but when the second form tries this, it will hit the ORA-00054 exception, and will NOT wait. The only way you could make it wait is to issue an UPDATE sql command, which is not such a good way to go.
All POST does is issues SQL insert or update commands for any changes the user has made to records in a form's base-table blocks, without following with a Commit command.
Also understand that Commit is the same as Commit_Form, and Rollback is the same as Clear_Form. You should read up on these in the Forms help topics.

No selectable items exist for purchase requisition l_banfn

Hi,
While creating PO with ref to PR getting the below error :
no selectable items exist for purchase requisition l'banf .
Checked if the PO is created, its not created,.
checked if the item is blocked/cancelled/deleted. Nothing is set.
PR looks fine. Dont know if any authorization data is missing?

Check the status tab in ME53N whether all the qty in PR are already used up
Or
Check the line item in PR whether it is deleted
Edited by: Karthik on Jul 20, 2011 12:37 PM

SELECTION SCREEN FIELD FOR MONTH AND YEAR

Hi All.
We are developing a 'Monthly Sales Tax(payable) Report.
they want the report based on the date(in the selection screen it will come only month and year only.).Depends on that month and year for that select-options ,it will pick up the record.
like if, jan 2005 to march 2006.
then it will pick up from 01.01 .20005 to 31.03.2006 records.
Can any body help me to resolve this.
Thanks in advance,
Regards,
Venkat

Hi Venkat,
Copy the following code.
DATA : ws_billfrom    TYPE dats,
        ws_billto      TYPE dats.
DATA : mon TYPE fcltx.
SELECT-OPTIONS: s_month FOR mon
            MATCHCODE OBJECT zsdhtch_sh_mnth
            OBLIGATORY. "o get values for F4
PARAMETER : p_year LIKE bkpf-gjahr
             MATCHCODE OBJECT zsdhtch_sh_year
             OBLIGATORY.
RANGES : s_date FOR sy-datum.
DATA : ws_fcmnr TYPE fcmnr.
START-OF-SELECTION.
SELECT SINGLE mnr
         INTO ws_fcmnr
         FROM t247
         WHERE ltx = s_month-low.
CONCATENATE p_year ws_fcmnr '01' INTO ws_billfrom.
CALL FUNCTION 'HR_JP_MONTH_BEGIN_END_DATE'
       EXPORTING
            iv_date             = ws_billfrom
       IMPORTING
            ev_month_begin_date = ws_billfrom
            ev_month_end_date   = ws_billto.
s_date-low = ws_billfrom.
s_date-high = ws_billto.
s_date-sign = 'I'.
s_date-option = 'BT'.
IF NOT s_month-high IS INITIAL.
    SELECT SINGLE mnr
           INTO ws_fcmnr
           FROM t247
           WHERE ltx = s_month-high.
    CONCATENATE p_year ws_fcmnr '01' INTO ws_billfrom.
    CALL FUNCTION 'RP_LAST_DAY_OF_MONTHS'
         EXPORTING
              day_in            = ws_billfrom
         IMPORTING
              last_day_of_month = ws_billto.
    s_date-high = ws_billto.
ENDIF.
APPEND s_date.
WRITE s_date.
You can write your select statement here.
select * from dbtable where date in s_date.
If 'HR_JP_MONTH_BEGIN_END_DATE' is nto there in your server, you can use 'RP_LAST_DAY_OF_MONTHS' in both cases.
Regards,
Susmitha.
Dont forget to reward points for useful answers

TS3276 how does one select a folder for an outgoing email, prior to sending out that email?

I would like to know what I need to do to select a folder for my outgoing emails before I send them. In other words, if I am sending a message to someone, Outlook has the option to select the folder where you would like to save the outgoing email to. That way, you are able to document all of your important outgoing emails. I was wondering if Apple mail had the same option. I know you can set rules up, the challenge is that the rules do not always apply depending on the email messages.
Thank you for your assistance.

Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback

Selection of Hierarchy for FS

Similar Messages

Maybe you are looking for