Selection of line item

hi,
Hi,
i want to select the lines in table control of transaction va02 and then want to delete that line through a program for selection, but how can i know that this line is selected and then proceed further.
regards
m.phanindra

Hi
   I may not give you the exact answer, but i think this will give you an idea in solving your issue.
   1) When we select some line from the list, then 'AT LINE-SELECTION' event will get triggered... You can write the required coding in this block of the code.
   2) Inorder know which line is selected, we use the HIDE area for that.
   ex: HIDE: wa_spfli-carrid,
                  wa_spfli-connid.
    This HIDE will store all the field values which come through it, and When a row is selected the data that has been hidden for that particular row will be made available again in the AT LINE-SELECTION block.
   Hope this will help you.
Thanks
Ravi

Similar Messages

Itunes - how do i select multiple line items not in sequence ?

itunes - how do i select multiple line items not in sequence ?

Hold down the Command key and click each in succession.
To extend the selection across items that ARE contiguous, use the Shift key.

Query runs forever when using selection on line item dim

we have a cube zcube which has po number as a line item dimension .
everymonth users run queries this cube using po number as selection
criterai and using a wild card search on this field . every time
queries have run fine . however , this month when we try to do so
the query runs forever and no results are returned . i also tried
listcubing with similar selection but it also did not return any results .
our production system has lot of data . i tried in test system it worked fine
i checked the cube for compression and indices in production , they look fine
can anyone think of anything that could have gone wrong ? also did rsrv tests ..
but all come green
we have not done any developments on this cube , however we have shifted to
a new hardware in the past month . can anyone think of any reasons ?
anything that can help me catch the issue ? all suggestions welcome

Not sure,
Are you saying that you need both the counts seperately? or a combined count?
how are you joining alpha and beta tables? what is the join condition?
you need to do something like this,
SELECT COUNT(CASE WHEN
                    (A.col1 = 'Pete' AND SUBSTR(A.col2,,1,12)=SUBSTR(B.col2,,1,13))
                 OR ( A.col1 != 'Pete' AND SUBSTR(A.col2,,1,15)=SUBSTR(B.col2,,1,15))
                THEN 1 ELSE 0
             END)
FROM alpha A, beta b
WHERE alpha.join_cloumn= beta.join_columnG.

Abap query to select a line item # from bseg on basis of following pattern:

Hello,
I want to retrieve the line item # from bseg which has the following pattern,
account type = S
AND
gl account starting from 135***** , 136***** , 137*****
, 138***** , 139*****
hope i am comprehendable. How do i go on writing the query,
Thanks..
Shehryar

Hi Shehryar,
This will fetch records with GL A/C starting with 13 only , if you want 14 and others also write sepearate conditions using LIKE statements.
REPORT zztest.
DATA : itab TYPE STANDARD TABLE OF bseg WITH HEADER LINE.
SELECT * FROM bseg INTO TABLE itab WHERE koart = 'S'
AND
hkont LIKE '13%'.
This will take a lot of DB time for fetching the records, try to include Key Fields(BUKRS and GJAHR .. if possible others).
Regards,
Arun Sambargi.
Regards

MIRO Deselect and select Multiple line items

Hi All,
At the time of miro we are taking the reference of PO. In PO we have 1200 lines related to Custom duty, additional custom duty, ecess, clearing and forwarding charges and freight.
we want to do the MIRO for custom duty, additional duty and freight only, for these we have 600 line items. we need to select these lines one by one. this is time taking job.
can any body tell me that how we can select these line at once.
Regards all

Hi,
You can make use of Planned Delivery cost in the PO Refernce Tab. This will cover all other costs other than you basic material or service cost.
Regards,
amit

BDC OK CODE To select PO Line Item

Hello,
Can anyone tell me the BDC OkCode to select a particular line item in a PO.
Thanks
Viky

are you using me22 or me22n ?
if me22, just below the table control, you can see a field 'Item' . if you key in 50 in this item, item 50 will come to the top line.
so while doing recording, pass the line item number to this field, RM06E-EBELP, and then hit enter....
loop at your internal table with bdcdata, and pass each item numbers one by one to this field, and do the bdc.
Message was edited by:
Sujamol Augustine

Select last line item from VBAP

Dear SAP experts,
This might sound very silly question but I am new to SAP world.
is there a simple select statement to select only higest line item.
Say for example in VBAP, I have 9 line items.
then my select statement should find the last line item. ie. 9th item.
Actually, I have a situation where a custom table has 2 key fields and I want to select the only 1 line with higest number in 2nr column. Thank you.
Anitha.

Hi,
types: BEGIN OF ls_vbap,
         vbeln TYPE vbap-vbeln,
         posnr TYPE vbap-posnr,
       END OF ls_vbap.
DATA : t_vbap TYPE STANDARD TABLE OF vbap WITH HEADER LINE,
       wa_vbap type ls_vbap.
data: lv_line type int4.
SELECT vbeln posnr FROM kna1 INTO TABLE t_vbap.
*****If you just need the last record then write the code as shown below:
DESCRIBE TABLE t_vbap LINES lv_line.
READ TABLE t_vbap INTO wa_vbap INDEX lv_line.
if sy-subrc = 0.
write:/ wa_vbap-vbeln.
endif.
If you the need the last record after sorting then use the below code:
SORT t_vbap by vbeln posnr DESCENDING.
READ TABLE t_vbap into wa_vbap index 1.
if sy-subrc = 0.
write:/ wa_vbap-vbeln.
endif.

How to select classification (line item in Contract)

Hi
 In the material master data (Basic data2), I have maintain the cross-plant CM for characteristic. I update data in line item (push button : item details : Configuration) of contract . I don't know which table that keep information that I would like.
Regards
Wiboon

Hey man.
I think you would like to get configuration variant ,right?
ALL FUNCTION 'CUD0_GET_VAL_FROM_INSTANCE'
EXPORTING
 instance = VBAP-CUOBJ
IMPORTING
TYPE_OF =
OWNER =
tables
 attributes = it_attr
EXCEPTIONS
INSTANCE_NOT_FOUND = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Have fun.
Sayan.

F110 How to select some line items form Proposal to pay.

Hello
I have create a proposal and extract text file with all customers and their checks,
after that i need to select some items from proposal to pay , not all proposal items.

Hi Yasser.
If I understand well, you want running a proposal only for few selected items ok?
For that you need select open items:
Go to Tcodes: FBL3N or FBL5N, choose the documents numbers of the open items
Go to Tcode F110 "Free Selection" > "Selection Criteria" in "Field Name" select "Document Number". then put the documents numbers of open items there. So, the select items will be in the proposal.
Example
Kind Regards
Jandoval Nascimento

Performance issue with selection of line items.

Hi All.
I am facing seriour Time_Out error problem for my program. Actually i am developing RFC and i have to send data to non sap system as it is in sap tables. Now i have to send data for BSIS for new entries for a day. SO first i search BELNR for CPUDT in BKPF and then use for all entries on BSIS. But now my problem is for a single day i am getting 1679 documents from BKPF and when i use for all entries in BSIS, it will give time out error.
my code is like
SELECT BUKRS BELNR GJAHR
   FROM BKPF INTO CORRESPONDING FIELDS OF TABLE I_BKPF
      WHERE CPUDT IN S_CPUDT.
if i_bkpf[] is not initial.
SELECT * FROM BSIS INTO TABLE I_BSIS
   FOR ALL ENTRIES IN I_BKPF
      WHERE BUKRS = I_BKPF-BUKRS
                   BELNR = I_BKPF-BELNR
                   GJAHR = I_BKPF-GJAHR.
endif.
So please gurus help me ..its urgent..

Instead of writing Select * write Select "Fields names" then try might be it will solve ur problem.
Reward points is helpfull

Delivery doc creation for a selected line item of the Sales order

Hi folks,
Can any one help me in how to create a delivery order for a selected line item of the Sales order.My requirement is the request comes from the web browser where a sales document and details of the items are shown the user select one line item and request for delivery create of that particular SO doc.I have used couple of FM to create delivery but the delivery create is depend on the schedule line dates so iam unable to figure out where exactly i can distinguish between the line items.
Example:
SO:- 11193645
Line item -1 has 2 schedule line 06/11
06/13
Line iteam-2 has 1 schedule line 06/12
so if i try to create Delivery doc for date 06/12
it creates partially for line 1 and line 2.
but my requirement is i wanted to create SO for only line item 1 as i wanted to process Del Doc for only line item 1.
If you have any idea please help me.

hi ,
You can develop a customised FM to process the Idoc data .
1. Read the Idoc data into internal table for the line items which need to be delivered .
2. Run BDC for transaction 'VL01N' ( delivery creation ) through which eliminate the line items which are not in internal table and save the delivery document
Note : Because in VL01N , you specify the sales document with respect to which you want to perform delivery hence automatically all items are copied to the delivery document .
During BDC recording , select items by " MOVING TO TOP"
and then deleting the selected item
If you face problem in BDC recording , i can help u that too .

Unable to capture the Line items row in BDC kindly help

Hi All,
I am trying to run the Tcode CJ40 here after i enter the project id and press enter a tabular form appears and we need to select the appropriate line item in that table .
When i try to do teh recoding using SHDB tcode it is not capturing that line item at all :(.
I tried to do the recordig usig the page down and tehn selecting teh line item in the table but still it doesnt capture in teh recording ,
Kidnly suggest me what needs to be done.
Thanks in Advance.
Sana.

Why dont you try with BAPI BAPI_BUS2054_CHANGE_MULTI
Check the Documentation

Line items are clubbed in Handling Unit's

There are two line items in delivery for same material , while packing I am selecting single line item and packing it . But when I select line item 10 and try to pack it, line item 20 also automatically getting clubbed with line item 10 and getting packed together .
For this material , rounding profile has been maintained .I canu2019t delete this rounding profile because when we process single line item for this material , system has to round off . Suppose , material is rounded off for 30 units in material master and rounding profile has been assigned for this material.
My requirement is handling unit need to be created for single line item , system should not consider 2nd line item while creating handling unit for first line item even though first and second line items consume same material .
In delivery, suppose , there are two line items for same material . for first line item quantity is 20 and for second line item , it is 23 .
When I try to pack it manually , system should create 2 handling units with quantity of 20 and 23 nos . System should not create handling units with quantity of 30 and 13 .
What configuration change I need to make in handling unit management .
Thanks In Advance
Jaya

Hi Pratyush
I have checked up in both the places, POP2 and POF2, target quantity was mentioned as 1 only for this material .
still ,Why is system not considering only one line item's quantity while packing . why is it clubbing both line items .
Pls help me ........

Vendor line item report in New GL

Hi
We have activated New GL. We need vendor line item report based on GL view. FBL1n provides report based on entry view. But we need simillar to FBL1n based on GL view. There is a standard report S_AC0_52000888 which provides vendor line item doucment wise with New GL characteristics such as profit center. However, this report does not provide additional information such as posting date, due date et.c which is available in FBL1n. Hence, we are unable to monitor vendor accounts at profit center level.
Can anyone suggest how to add additional fields in the above report or any other report available for the same.
Thanks
S.Radhakrishnan

hI
Thanks for the reply.
As per your suggestion, we need to bring GL view parameters from FAGL* tables. I need clarification here:
1. In our case, single line item in BSIK may correspond to multiple profit centers and hence multiple line items in FAGL* tables.
2. Users run the report for multiple vendors ( beig range) with their profit centers as selection criteria.
3. In the above case, we need to select all the line items for that vendor and go to FAGLFLEXA and select all line items and delete all line items not pertaining to the profit center entered as selection.
4. The above process would be time consuming since all the open items will be selected and then delete all those items which are not required.
5. Else, can we select the items from FAGLFLEXA directly for the profit centers entered and bring additional information from BSIK table. Since vendor accounts are not there in FAGLFLEXA, it would be cumbersome and time consuming.
6. Which of the above approach would you recommend.
7. Is it possible to modify the ACO report so that we can add additional information such as posting date, due date etc.
Regards
S.Radhakrishnan

Unable to delete line item with 0 quantity in Invoice.

Hi Experts,
I came across a Invoice which reflects in VF04 as pending Billing due list. When i checked at the inter company Invoice i came across a line item with "0" quantity and price as zero, interestingly the replinishment cross company delivery document for the same line item for "0" quantity had a Batch assigned to it.
Now the issue is cusotmer has selected the line item with XX quantity and have selected the accounting document to be generated but the line item with "0 was left over and now still reflects in VF04.
Customer does not want to reverse the full cycle to resolve the issue since the document was created a year back.My Question is can we get the line item with "0" quantity to clear accounting so that it will not reflect in VF04.If so what will be process to do that.
Thanks in Advance to advice.
Regards,
Sridhar.R

Hi,
It is not possible to delete this line item, you can discuss with your client and delete it from the table.
And now coming to the reasons why it has come into the invoice & Delivery
1. The Batch Item category must have been configured as relevant for billing...check this and make it irrelevant if the client does not do batch specific billing. --- This will stop the batches from coming into the invoice.
2. Check for the batch item category in delivery if Zero quanity is allowed...if it is allowed make it not allowed and make it an Error message, whenever there is a zero quantity system will give a message.

Selection of line item

Similar Messages

Maybe you are looking for