Selection of PV at the time of MFBF

HI
  I have a inhouse SFG for which there is two BOMs and one routing and we are working with REM scenario.and similarly two PVs as cobination of BOM and routing , the two PVs are of same lot size.the issue is in one BOM there is component which is from another plant from STO and in other the same is from vendor.now the requirement is first the user use the PV for which the procured component from vendor stock exists and if that is not available the system allows to use the stock of STO, or another PV
Thanks in advance
Regards
Anupam Sharma
Edited by: anupam sharma on Oct 22, 2009 12:18 PM

Dear Anupam,
In my understanding we cannot use alternative item group concept for your first query as the material code for that component
remains same.So in case if you are maintaining the production storage location different for the one which is supplied from
vendor(say XX01) and the one which obtained through STO,then at BOM level you mention the production storage location as
XX01 and so this will be proposed at the time of backflush and if no stock is there in this storage location then the system
issues warning or error message based on the setting defined for the error correction.So in that case you can remove this
XX01 and mention the storage location for the one obtained through STO.
For the second part of your query,I'm not sure why the system is allowing to use production version irrespective of the lot size.
Check whether this user Exit XMRM0001   User exits: Backflushing in Repetitive Manufacturing can help you.
Correct me If i'm wrong somewhere.
Regards
Mangalraj.S

Similar Messages

  • HT3275 When I press "select backup location" in the Time Machine section of System Preferences, my external hard drive doesn't appear as an option.  How do I change this?

    When I press "select backup location" in the Time Machine section of System Preferences, my external hard drive doesn't appear as an option.  How do I change this?  My external hard drive is a FreeAgent GoFlex Drive.

    Hi, what Format is the external Drive?
    They usually come PC Formatted for Fat32/MSdos, or NTFS... is there anything on it now?
    How to format your disks...
    http://www.kenstone.net/fcp_homepage/partitioning_tiger.html
    (To Install OSX on an IntelMac the Drive it needs the GUID Partitioning scheme mentioned at the bottom.)
    Thanks to Pondini, Formatting,  Partitioning, Verifying,  and  Repairing  Disks...
    http://Pondini.org/OSX/DU.html

  • How can I fix the long delay (15 min  ) between the time I select a song to the time it begins playing?

    How can I fix the lond delay (15 min.) between the time I select a song to the time it begins playing?

    Hi Ben,
    This is a common issue that NI LabVIEW does not address.
    The good news is that OpenG provides a function to do just what you need.
    See this article: Resize Front Panel to largest decoration
    The way to get the OpenG functions is to use the JKI VI Package Manager (VIPM).
    In addition to the OpenG functions there are several other community provided tools avaliable through VIPM.
    For a quick test, I'm attaching these files (LV version 2010 sp1):
    Fit VI window to Largest Dec__ogtk.vi and the required sub vi Current VIs Parents Ref__ogtk.vi.
    You should really use VIPM to get the full OpenG library - there are many gems in there.
    steve
    Help the forum when you get help. Click the "Solution?" icon on the reply that answers your
    question. Give "Kudos" to replies that help.
    Attachments:
    Fit VI window to Largest Dec__ogtk.vi ‏29 KB
    Current VIs Parents Ref__ogtk.vi ‏9 KB

  • Tree Node selected not firing all the time

    I have a tree menu that calls other forms when the user selects a tree branch (see
    When-tree-node-selected trigger below).
    This works fine, but if the user closes the form and want to re-open it, the trigger doesn't fire unless the user clicks off the branch item and back on it. How can I make it work whenever the user clocks the branch item?
    if :SYSTEM.TRIGGER_NODE_SELECTED = 'TRUE' then null;
    node_value := Ftree.Get_Tree_Node_Property(htree, :SYSTEM.TRIGGER_NODE, Ftree.NODE_VALUE);
    open_a_form(l_form,l_module,l_form_code);
    end if;

    Have you tried setting the node the node to deselected programmatically?

  • Select records based on the closest given time

    Dear SQL gurus,
    I have a table T1:
    Name Null? Type
    ID NOT NULL NUMBER(5)
    MOMENT NOT NULL DATE [DD.MM.YYYY HH24:MI]
    MEASUREMENT NOT NULL NUMBER(8,3)
    Example (ID, MOMENT, MEASUREMENT)
    -- START OF EXAMPLE --
    9380 18.11.2000 03:45 17.6
    9380 18.11.2000 04:30 17.3
    9380 18.11.2000 05:45 16.8
    9380 18.11.2000 06:15 16.8
    9380 18.11.2000 07:00 16.2
    9380 18.11.2000 07:30 16.2
    9380 18.11.2000 08:15 16
    9380 18.11.2000 08:45 15.7
    9380 18.11.2000 09:30 15.4
    9380 18.11.2000 10:00 15.4
    9380 18.11.2000 11:15 15.4
    9380 18.11.2000 11:45 15.4
    9380 18.11.2000 12:30 15.4
    9380 18.11.2000 13:00 15.4
    9380 18.11.2000 13:45 15.4
    --- END OF EXAMPLE --
    How to select records based on the:
    - time period specified by the day only [DD.MM.YYYY] - CONDITION 1
    - with values for 6AM only, and if not available, with values closest to 6AM - CONDITION 2
    (if the time gap in MOMENT field is too big, lets say > 5h then choose the average between the value before 6AM (ex. 4:15AM) and the value after the 6AM (ex. 9:45AM))
    CONDITION 1 (something like): moment between '01.01.2005' and '31.12.2004' - this is OK
    CONDITION 2: I do not know how to formulate, especially if 6AM value is not availabe, and I have to find the closest available value, or get the avergae from the two adjacent values.
    Maybe cursor magic??? Thanks a lot for your help.
    Rado

    About condition two, would the following select be of use to you? Picking the first record could be achived by rownum, analytic function, etc.
    WITH t1 AS (SELECT 9380 id, TO_DATE('18.11.2000 03:45', 'dd.mm.yyyy hh24:mi') moment,  17.6 measurement
                  FROM dual
                 UNION 
                SELECT 9380 id, TO_DATE('18.11.2000 04:30', 'dd.mm.yyyy hh24:mi') moment,  17.3 measurement
                  FROM dual
                 UNION
                SELECT 9380 id, TO_DATE('18.11.2000 05:45', 'dd.mm.yyyy hh24:mi') moment,  16.8 measurement
                  FROM dual
                 UNION
                SELECT 9380 id, TO_DATE('18.11.2000 06:15', 'dd.mm.yyyy hh24:mi') moment,  16.8 measurement
                  FROM dual
    SELECT id, moment, measurement, diff
      FROM (SELECT id, moment, measurement,
                   moment - TO_DATE(TO_CHAR(moment, 'dd.mm.yyyy ') || '06:00', 'dd.mm.yyyy hh24:mi') diff
              FROM t1
    ORDER BY abs(diff) asc, SIGN(diff) desc;
      C.

  • BOM selection at the time of confirmtion

    Dear Experts,
    My client has requirement that BOM should be selected at the time of confirmation if there are multiple BOM's are available for the same material.Is it possible ??.
    Edited by: manjit_pune on Mar 7, 2012 10:07 AM

    Hello Manjit,
    As a SAP fucntion, BOM should be selected/exploded at the time of MRP so that SAP would be in position to plan the components accordingly. What the reason or benefit of selecting relevant BOM at the time of confirmation ??
    In any case, this function is not possible in standard SAP.
    Regards,
    Anup

  • Why is the Time Zone incorrect in iCal?

    I live in Hawaii and when I trun on the Time Zone Support (in Mail, Contacts,Calendars) and select Honolulu, it puts the time 1 hour earlier than the current time. (iCal shows 6:30 when the actual appointment is for 7:30).  However, when I select Anchorage, Alaska, iCal is set to the correct time.   If I turn off the Time Zone Support it sets the time 1 hour earlier  - just like setting it to the Honolulu time.  Can someone explain why this is happening.  It start when I switched to Lion and iCloud.

    Are you normally in Hawaii?  What is your "home" area?

  • I would like to use time Machine to back up to a network SMB drive. I can see the drive on my desktop but it will not show in the time machine window to be able to select it

    I currently have a mini server (OSX10.8.5, server 2.2.2) that I am using Time Machine to back up 4 external drives that are connected to the server via firewire 800. I would like to use Time Machine to back up to a windows network SMB drive. I can see the drive on my desktop but it will not show in the time machine window to be able to select it for use.
    Can this be done
    Thanks for any and all help

    The supported targets for Time Machine backups are local (direct-connected) disks, and network targets include Time Capsule, a disk hanging off the current-generation AirPort (though not earlier AirPort devices), and OS X Server systems.
    The Time Machine storage is based on the HFS+ file system, so I would not expect TM to work with SMB file services.
    While there are hacks to allow Time Machine to access network drives, I would not consider those to be reliable. Skim the forum and the 'net for related details, and for previous discussions of setting this up and the related issues that can arise.
    Remember to test the recovery with whatever you decide to use; whole point of backups is the ability to restore the data, after all.
    If you want to learn more about Time Machine, Pondini is an excellent resource.

  • How to select two things at the same time ?

    Hey guys, i'm French and I need your help !
    I'm working everyday on iWork and especially Pages.
    How to select two parts of a text at the same time ?
    Before we only need to select one, to press the "cmd" button and then to select another part. It doesn't work anymore!
    Thanks for you help
    and sorry for the mistakes !

    Hey guys, i'm French and I need your help !
    I'm working everyday on iWork and especially Pages.
    How to select two parts of a text at the same time ?
    Before we only need to select one, to press the "cmd" button and then to select another part. It doesn't work anymore!
    Thanks for you help
    and sorry for the mistakes !

  • How can I select tracks to play from my downloaded music as a casual playlist at the time?

    I have downloaded all my music onto my Ipad and have a list of songs. I have created playlists for various occasions but I want to be able to select and play random tracks as a one off playlist at the time. I cannot see anyway I can "tick" tracks to play, then hit play. Can anyone help or is this facility not possible. Thanks

    I have downloaded all my music onto my Ipad and have a list of songs. I have created playlists for various occasions but I want to be able to select and play random tracks as a one off playlist at the time. I cannot see anyway I can "tick" tracks to play, then hit play. Can anyone help or is this facility not possible. Thanks

  • Manual BOM selection at the time of order creation

    Dear Experts,
    Could you help me to understand if there is any provision to select BOM by user at the time of order creation without the help of production version.Is there any configuration required to make BOM selected manually.
    Regards,
    Krishna Mohan

    Hi karishna,
    Please go to T-code OPL8 and in production version use( 1 )Manual selection of production version. Then user can select manually instead of automatic selection.
    Regards
    Muhammad Umar

  • Selection Of BOM & Routing at the time of production order creation

    Hi guys,
    Please clarify how i can go about for the following mentioned scenario
    I have one Master BOM(Finished Product Level) & alternative BOMs for that,similarly i have one Master Routing & alternate routings for the same finished product
    At the time of production order creation is it possible for me to choose one of the BOMs & One of the routings of that particular finished product without creating a production version?
    Awaiting for a quick response
    Vijai

    Hi vijai prasad shanmugam ,
                                              In the material master MRP-4 view under the BOM selection you can maintain on what fatcors you want the BOM to be selected  Viz. Selection by order quant.,Selection by explosion date.Selection by production version etc.
    As far as the master recipe is concerned ........ I guess that if there are more than one valid master recipe maintained then SAP will prompt to select the one manually.........
    But it the standard practice to maintain the production version ....... for the similar situation to the one that you have mentioned.
    Please Let me know if I can help you in any way regarding this........
    Please reward the points......... in you find the ans helpful.....
    Thanks
    Kaushik

  • Wrong account group selected at the time creation of G/L master record

    hi,
       At the time creation of   depreciation G/L master account  , which has been selected as balancesheet account instead of Pand L account , and the transactions have been posted.  when i try to change to P and L account in FS00 it says trasactions exist  we cannot change. now  how should i change to P and L account is there any way to chance of changing into Pand L account .
    if not what should i do please let me know.
    regards
    santhoshkalva

    Dear,
    Create a new GL (Depreciation) with P and L account then transfer the balance from the existing Balance sheet GL to P&L GL, then try to block or set a deletion flag for the Balance sheet GL.

  • Batch selection at the time of GR for Process Order

    HI experts,
    I have the following problem -
    I have got a process order of 51, at the time of order creation I have assigned/created 2 batches for the process order using some development and making use of user field. Now at the time of GR after final confirmation, I want to select the batch number for the required quantity, i.e I want to do the GR for both batches, and I want to select the specific batch from the assigned 2 batches. I am facing a problem that , the GR by default selects the first batch of the order and the batch number field greys out. I am not able to select the second batch if I go for second GR of the same process order.
    How can I make the field selectable , such that I can select the required batch at the time of GR.
    Regards
    A S K

    There is a possibility to use batch split- kindly check if you are able to do this
    Reg
    Dsk

  • I just downlouded the latest version of the Muse CC and it doesn't work well, it freezes all the time, in particular with the tools. Example the selection tool doesen't wor at all.

    I just downlouded the latest version of the Muse CC and it doesn't work well, it freezes all the time, in particular with the tools. Example the selection tool doesn't wor at all. Is there any solution for this problem?

    Hi!
    I restarted the computer, but the same issue happens again. When I move my mouse over some object or tool, it doesn’t come active at all (only some of the tools works) When I try to change “site properties”, I can’t choose tablet or phone mode or even I can’t select the checkboxes, only thing what I can do is change the numbers (high and width) . After all the main problem is that I can’t select some of the items or functions by mouse, but only by the keyboard.

Maybe you are looking for