Selection variables - upload greyed out in Analyzer

Hello,
I'm trying to find out how to upload selection variables via .txt when opening a query/workbook in the BEx Analyzer but the option is greyed out in every single query/workbook.
So my question is: under which conditions can I use that option (I suppose NOT if the variable is supposed to be a single value, right?) and is there any chance that option is just plain deactivated in our system? If yes, where can I change that?
Thanks in advance for every helpful advice I can get.
Anja Gäbler

Ok, I think I've found the solution myself.
I've found out there's a special button ("Variablen personalieren" in German, don't know exactly what it's in English ("personalized variables?") ). I have to click that one in order to get into another menu where I can click on yet another button "Change Selection".
Now it's working with the following characteristics ( show: "single values" and Hierarchy: "plain list")
So thanks I guess for offering your help :-) Sometimes it pays off to just click some buttons and see what happens.
Edited for the sake of completeness: Found out that this "workaround" is nesseccary when trying to create or load a list for characteristics sorted in a hierarchy. For every other characteric sorted in a "flat list" you can up- and download directly via the "Choose from List" button. Just saying, in case someone wonders like I did.
Message was edited by: Anja Gäbler

Similar Messages

Fix and Fix All buttons greyed out in Analyzed Results List

The Fix and Fix All buttons are greyed out in the Analyzed Results List. This was working preTiger at least. Perhaps after my initial clean install of 10.4.1. Now running 10.4.3. Things I've tried to no avail:
Reading the documentation and "Late Breaking News".
Repaired permissions.
Repaired disk. (found no problems)
Ran Disk Warrior (found no problems)
Trashed SountrackPro prefs file.
Tried several existing and three new Audio File Projects on the internal and an external firewire drive.
Searched for a similar topic in this forum.
TIA for any help, Ken

It works for me.
First you have to select what you want to fix (e.g.
clicks and pops) then press the analyze button to get
a list of things to fix.
Right after the analysis is done, if at least one
thing was found to fix,you should see the "fix all"
button not greyed out, but the "Fix" button will be
greyed out until you actually click on one or more
of the items in the analysis result list.
Are you seeing something different from the behavior
I've described?
My experience and information is that Soundtrack Pro only finds clipped samples. Have you been able to fix them as well?

Aperture 3 selected albums option greyed out

Having a problems with Aperture I phone cache.
When syncing 'Selected albums' option is greyed out. Deleted the i phone cache in Library -Aperture 3 and it is still not working.
Cant upload entire library as it's too big for my iphone

I am having this exact problem, i have tried EVERYTHING and still unable to sync 'Selected Albums'

[Bug][Tip]Time Machine "Select Disk" Button Greyed Out (But Still Operational)

Recipe:
1) Log in as a non-admin user which has Time Machine enabled
2) Open Time Machine Preferences
3) Unlock Settings and enter admin username and password
4) Notice that the Select Disk icon is greyed out
5) Click the Select Disk Icon anyway and change disks.
I discovered this because I carry my Mini between home and work and have a backup drive in each location. Time Machine is only able to remember one drive at a time (but it handles this setup just fine as long as you Select Disk when you get to a different drive).

Recipe:
1) Log in as a non-admin user which has Time Machine enabled
2) Open Time Machine Preferences
3) Unlock Settings and enter admin username and password
4) Notice that the Select Disk icon is greyed out
5) Click the Select Disk Icon anyway and change disks.
I discovered this because I carry my Mini between home and work and have a backup drive in each location. Time Machine is only able to remember one drive at a time (but it handles this setup just fine as long as you Select Disk when you get to a different drive).

Select-Option field grey out-no further input

Hi SDNers,
I have select Option field sales document type AUART ,I need to default the values and should grey out the field to not allow the user from entering any other value.
I have tried using modif id,
at-selection screen output
loop at screen
screen-intensified = '1'.
modify screen.
endloop.
but this code only highlights the entire line,but doesn't meet the requirement.
Please provide ur valuable suggestions.
Thanks
Reddy

hi,
use:
at-selection screen output
loop at screen.
if screen-group1 = '123'.
screen-input = 0.
modify screen.
endif.
endloop.
A.

After upgrading to IOS 5.1.1 the Wi-Fi selection in settings greyed out and now says No Wi-Fi. Have tried restting and restoring both from te phone and from Itunes but this does not solve the problem.

I recently upgraded my Iphone 4s to 5.1.1 and founf the Wi-Fi button in settings greyed out saying No Wi-Fi. I have tried Reset network Settings, Rest All Settings and restore in Itunes but to no avail. I understand this is a comon occurence but I cant find a solution to it. Can anybody help?

See this tip --> http://support.apple.com/kb/TS1559
If this doesn't resolve it you most likely have a hardware failure. Fortunately, your phone is in warranty, so if you take it to an Apple store they will replace it.

Trying to update from OS 10.1__hard drive selection in Installer greyed out

Was recently given an iMac with a faulty HD. Was able to install a new HD and OS 10.1, but have been unable to update further, because the Installer has greyed out the HD choice in the final step of installation. I am at a loss here. Also the HD is showing as only having about 130 GB available on a 250 GB drive. I doubt the problems are directly related, but maybe one of you would know. I've been stuck at this spot for a couple of days now.

Welcome To  Discussions D'Ville!
Mac OS X Versions 10.1, 10.2, 10.3, 10.4, and 10.5, are complete system upgrades that must be purchased.
Once an OS has been installed, the point upgrades, such as 10.1.x to 10.1.5 (Final) 10.2.x to 10.2.8 (Final), 10.3.x to 10.3.9 (Final), 10.4.x to 10.4.11 (Pending), and 10.5.x to 10.5.1 (Pending), can be downloaded for free.
Tiger is available for purchase at The Apple Store (U.S.).
Jaguar and Panther, are no longer available directly from the Apple Online Store, as Leopard 10.5.x, is the most up to date OS.
If you know what to look for, Jaguar Full Retail CDs, a Full Retail Version, of the Panther Install CDs, or a Full Retail Version, of the Tiger Install DVD, can be purchased, sometimes less expensively, at some online Apple retailers, Amazon, eBay, FastMac, HardCore Mac, AllMac, etc.
This is the correct one Mac OS X 10.4.6 Tiger, (DVD) Retail, selling for $159.95, at FastMac.
And at HardCore Mac, selling for $199.99.
Notice that both, are more expensive, than, the The Apple Store (U.S.), selling for $129.00.
Be sure not to purchase grey, upgrade or machine specific CDs or DVDs.
Jaguar and Panther are only on CDs, not DVDs.
Tiger and Leopard are on DVD.
The discs should look exactly like the images in the above links, and not say Upgrade, CPU Drop-in DVD, or "This software is part of a hardware bundle purchase - not to be sold seperately." on them.
Additional info in these links.
Using OS X Install CDs/DVDs On Multiple Macs
What's A Computer Specific Mac OS X Release
Software Update, Upgrade: What's The Difference?
Caveat Emptor!
If any are presently available, examine these items very carefully, and if in doubt, ask questions of the seller before purchase!
Jaguar On eBay
Panther On eBay
Tiger On eBay
Before upgrading to any OS X version, check to see if your Mac needs a Firmware Update.
If one is required, you must start the computer from a Mac OS 8 or Mac OS 9 System Folder on the computer's hard disk, not from a CD, in order to install it.
Here is the Firmware Update for that iMac model.
Once Jaguar 10.2.x is installed, you can use the 10.2.8 Combo Update,
or if Panther 10.3.x is installed, you can use the 10.3.9 Combo Update, to upgrade to the final version of either OS.
If your Mac meets the Tiger System Requirements, you could also consider installing that, and then use the PPC 10.4.11 Combo Update, to upgrade to the current version.
Jaguar System Requirements
-Power Mac G3 or G4, iMac, eMac, PowerBook G3 or G4, or iBook computer
-128MB of physical RAM
-Supports all video cards shipped by Apple on Mac OS X-compatible systems. Quartz Extreme functionality is supported by the following video cards: NVIDIA GeForce2 MX, GeForce3, GeForce4 MX, or GeForce4 Ti; Any AGP-based ATI RADEON card. A minimum of 16MB VRAM is required.
-QuickTime Pro functionality requires a QuickTime 6 Pro key. The QuickTime 5 Pro key will not work after this software is installed.
-DVD Player requires a DVD-ROM equipped Macintosh with built-in FireWire.
Review these KB Articles, for the Panther System Requirements, and the Additional Panther System Requirements.
The posted RAM System Requirement, for all versions of OS X, is the bare minimum.
For optimum performance, more is recommended.
Additionally, Tiger 10.4.x ships on a DVD, so if your Mac doesn’t have a built-in DVD-ROM player, you will have to use an alternative method of installation.
Info here Installing Tiger Using Firewire Target Disk Mode.
And here Installing Tiger Without A DVD Drive.
The Tiger Media Exchange Program, referred to, is no longer available.
There is also a version available on CDs, at FastMac, for $179.99.
Shop Carefully, Examine All Documentation, And I Wish You Success!
ali b

Language selection is disabled (greyed out) - Creative Cloud Desktop app

Hi,
Like the picture below shows, the language selection in the Creative Cloud Desktop app is disabled. (as well as everything else in the Apps tab)
I would like to change the language to English, but how?
- Lars Olsen

Hi LarsOlsen,
Welcome to Adobe Forum,
It will depend on your operating system. Windows users have reported the need to remove and reinstall the application for the langauge to switch.
Macintosh users have mostly reported the same behavior with the language changing without the need to reinstall.
This link may be helpful: http://helpx.adobe.com/creative-cloud/kb/change-installed-language.htm l.
You need to adjust the language setting in the Creative Cloud application. Please see Adjust the install language | Creative Cloud applications in the link
above.Please let us know if you require further assistance.
You can contact Adobe Support via http://adobe.ly/yxj0t6.
Regards,
Rajshree

Why can't I restore my previous browser session, the selection box is greyed out so it cant be selected

when I rebooted my Microsoft surface 2 tablet & then tried to restore my last browser session, nothing happened, and I cant see my recent history. not sure if there is any other info I can give you, and i would try!

If you still have it open you can navigate to "about:sessionrestore" and the list of tabs from the last session in the sessionrestore.backup file should be there.
If it is not there, and after try [[Back up and restore information in Firefox profiles]].
I noticed Waterfox version 26, Waterfox is an unofficial 3rd party version of Firefox.

Online Certification Authority "Select" greyed out IIS with 2008 R2 PKI

I have built a two tier 2008 R2 PKI with an offline Root CA and an online issuing CA. The domain is a 2008 funtional level.
From a 2008 IIS server on the same domain, I have tried to Create a "Domain Certificate" so I can implement an internally self signed web server. On the first screen, I am able to enter all the details under "Distinguished Name Properties", but when I go
to the next screen, "Online Certificate Authority", the Select button is greyed out next to "specify Online Certifcation Authority" . The only online articles I have found say this indicates that something is wrong with the CA,
but not what.
I have checked everything with PKIview and the CA looks healthy. I have also run the BPA for certifcate services and the BPA for DNS and no problems are shown.
I have checked that the certifcate template for Webservers I have created and looks okay and have been able to manually send a web server request to it on the CA and install it on the webserver.
I am also able to successfully autoenrol user and machine certifcates within the domain and use this for 802.1x Wireless authentication.
Any pointers in would be appreciated
Thanks
Iain

Open Certification Authorities MMC snap-in, expand root node and select Certificate Templates (this node is available on Enterprise CAs only). Click Actions -> All Tasks -> New -> Certificate template to issue.
Note that IIS server *machine* account must have Read and Enroll permissions on this template.
http://en-us.sysadmins.lv

Activate Windows 8 Enterprise over the phone (The option to choose what country you are calling from is greyed out)

I am trying to activate Windows 8 Enterprise. However, the workstation I'm running it on is not able to connect to the Internet. So, I select "Activate over the phone". However, the "Click nearest location" is greyed out.
The default is set to Afghanistan, which unhelpfully lists a toll number to call in Afghanistan...which would work if I lived in Afghanistan, but I don't. Other than pluggint the system into the Internet is there a way to activate my copy of Windows
8 Enterprise over the phone? I need a toll free US number.

I appreciated the tip. However, it is not the answer to my post. I only need a toll free US phone number to complete over the phone activation. Like I said in my original post, the drop-down selection box is greyed out and only shows a
number for users in Afghanistan.
If phone activation for the evaluation version of Windows 8 Enterprise is unavailable, then THAT should be the answer.
Here you go...
1-888-725-1047
Regards,
prathaprabhu

Greyed out images; exports to Mail are blank; generating images issue

Selected images are greyed out in the main viewer; sending a reduced file size via Mail gives a blank mail, but with a selectable rectangle and correct file name with a size only around 25kb. Sending originals at 100% works OK. The generation of reduced size images seems to be causing the problem as I can view an image at 100% in the main viewing area. Exports seem to still work OK - again 100%.
I have deleted the prefs file. I have deleted the application, although reinstallation seems simply to un-delete, returning the app to 'as was'. I'm hopeful that reinstalling will cure this, but how does one remove the application completely?

I got another great answer from yahoo.
They told me to clear cookies, cache, etc...
They said to reboot.
They said to try opera.
It seems no one reads my emails there to support nor do they do proper troubeshooting.
I am in the IT field and I appreciate good support when I get it but unfortunately it's so rare.
The first thing they should be doing is trying to either replicate the issue or verify whether yahoo did any updates on their end.
Instead I'm being sent ridulous help links because they can't even read.
I've sent all information necessary from screenshots to os to devices.
Personally I believe yahoo made an update that's screwing everything up.
Not only have I done those things they suggested but I told them twice already.
The only thing I havent tried was opera. I tried 4 different browsers and none worked.
I tried opera just to shut them up and it didn't work either. It seems opera handles mobile mail differently than all the other browsers as they show no pictures at all. They aren't missing, they just arent there with how opera handles the mail. They instead give you a link to view the store advertisements.
I think I need to call them and see how far up the chain I can get with someone who can actually read and even troubleshoot.

I am trying to upload a file to an accounting website for work. It will not allow me to select any type of file, they are all greyed out.

I am trying to upload a file to an accounting website for work. My computer will not allow me to select any type of file, they are all greyed out.

Try using a different browser. If it works, then the problem is most likely Safari. If the other browser doesn't work, perhaps it is the web site.
Firefox

My replacement iPod will not sync. I've purchase new songs and albums and can see them on my PC. but they will not sync. When I select the devises from the menu the Sync is greyed out..

I just had to replace my classic iPod, lost all my music (except previously purchased). New (refurbished) iPod will not sync the new music I've just purchased or the CD's I've uploaded. When selecting the Devises in the menu, Sync is greyed out. I need help. When I plug my iPod into the PC and is shows it is syncing it only picks up my previous music,

See this article how to transfer your data? How to back up your data and set up as a new device
Make sure your new computer is authorized in iTunes. Disable autosync in itunes, connect your ipod, right click on it in the device list and choose backup.
This will save data, pictures and settings to itunes. See what's included in this backup here: http://support.apple.com/kb/HT1766
Transfer your purchases the same way to copy all apps and bought media from the Store to your computer.
Set up at least one contact and event on your computer to be able the merge your calendars and contacts after your ipod got wiped during the first sync.
The rest of the data can be restored from the backup you made.
Restoring: http://support.apple.com/kb/HT1414
As mentioned by vazandrew, music is one way only, from the computer to your device, unless you bought the songs in itunes and transferred your purchases.
There is 3rd party software out there, but not supported by Apple, see this thread: http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0

My computer froze during match initial formatting. Now some songs are uploaded others are "greyed out." If I go song by song, I can update match. How can I do this all at once and also update album art?

My computer froze during match initial formatting. Now some songs are uploaded others are "greyed out." If I go song by song, I can update match. How can I do this all at once and also update album art?

Hi gdogk,
If there was an interruption during the initial iTunes Match process and you are now having issues with playback and album art, you may find the troubleshooting steps outlined in the following article helpful. In particular, you may want to turning iTunes Match off, then back on again, as noted here:
If iTunes Match is already enabled on your computer or device, try turning iTunes Match off and then on again.
Mac: While holding down the option key, choose Store > Turn Off iTunes Match.
Turn iTunes Match on by selecting Store > Turn On iTunes Match.
Windows: While holding down the shift key, choose Store > Turn Off iTunes Match.
Turn iTunes Match on by selecting Store > Turn On iTunes Match.
How to troubleshoot iTunes Match - Apple Support
Regards,
- Brenden

Selection variables - upload greyed out in Analyzer

Similar Messages

Maybe you are looking for