SelectOneListBox - empty list on subsequent entry to the page

Hello,
I have two jspx pages. A command button on the first page is used to invoke the second page. On the second page, I used a SelectOneListBox to display a list of items and a "cancel" button to return to the first page (still in testing/design mode). The first time the second page is entered, I saw items in the list box. However, on subsequent entry to the second page, the list is empty. I don't understand what is causing this undesirable behavior. Any help you can provide is greatly appreciated. Thanks.

Hi,
I assume that the iterator for the list binding is not executed. Try and create a invoke action in the executables section of the pageDef file. Point it to the Execute action that either exist in the bindings section - or that you have created before for the list iterator. Maybe its something else, but this is not identify based on your description
Frank

Similar Messages

  • List does not exist . The page you selected contains a list that does not exists. It may have been deleted by another user

    Hi everybody!
    I have a sharepoint 2013 farm with 5 sever. I upgraded a site from sharepoint 
    2007 to sharepoint 2013. I had some problems to install and configure workflow manager and register it. but by now I found problems and I can create a workflow and run it successfully. My big problem is when I try to get a lookup field in my flow. the
    flow suspended and I got the following error:
    “List does not exist . The page you selected contains a list that does not exists. It may have been deleted by another user.”
    Any solution???
    Thanks in advance!

    Hi,
    Please make sure the source list of the lookup column and the list which consumes the content from the lookup column exists on the site collection.
    In addition, to correct this problem the following steps should be applied:
    Delete the affected Workflow association
    Go to "Central Administration" - "Application Management"
    Select the affected web application and choose "General Settings" - "Resource Throttling"
    Increase the value configured as "List View Lookup Threshold"
    Perform an iisreset to ensure that all in memory instances of the web application settings are gone
    Add the Workflow association back to the list
    More information is here:
    http://social.technet.microsoft.com/Forums/en-US/3aeeba20-07dd-4e46-941b-a3db1bb3577e/sharepoint-2013-designer-workflow-the-page-you-selected-contains-a-list-that-does-not-exist?forum=sharepointcustomization
    Best Regards
    Dennis Guo
    TechNet Community Support

  • Calendar List view shows entries under the wrong date

    I just upgraded to iOS4 and finding that my calendar entries are appearing under the wrong date in the calendar list view when I am viewing two calendars.
    - List view is ok when viewing 1 calendar
    - Day and Month views are ok at all times (ie: viewing single or multiple calendars)
    - I have 2 Exchange accounts
    - Calendar entries are appearing in the correct order, but under the incorrect date heading.
    - When I intially added the Exchange accounts the calendar list view was fine at first (I could see both calendars correctly in list view) but after a short time later it became screwed up.
    Anyone else experience this?

    Same problem here since my upgrade to iOS4 - but I only noticed today.
    I have 3 calendars set up:
    Gmail (Exchange)
    UK Holidays (iCal)
    Birthdays
    The exchange calendar is always wrong but the other two are correct when my exchange calendar is switched off.
    It has mucked up my scheduling a bit for the next month. I only became suspicious when I noticed the Scottish Bank Holiday Monday at the beginning of August was showing on FRIDAY, 30th of July!

  • When on craigs list when i hit reply the page never opens.

    It doesn't matter what ad I am on.

    Do you have the problem on just one page, or the whole site?
    What about other sites? Any problems?
    Many site issues can be caused by corrupt cookies or cache.
    * Clear the Cache and
    * Remove Cookies<br> '''''Warning ! ! '' This will log you out of sites you're logged in to.'''
    Type '''about:preferences'''<Enter> in the address bar.
    * '''Cookies;''' Select '''Privacy.''' Under '''History,''' select Firefox will '''Use Custom Settings.''' Press the button on the right side called '''Show Cookies.''' Use the search bar to look for the site. Note; There may be more than one entry. Remove '''All''' of them.
    * '''Cache;''' Select '''Advanced > Network.''' Across from '''Cached Web Content,''' Press '''Clear Now.'''
    If there is still a problem,
    '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
    While you are in safe mode;
    Type '''about:preferences#advanced'''<Enter> in the address bar.
    Under '''Advanced,''' Select '''General.'''
    Look for and turn off '''Use Hardware Acceleration'''.
    Poke around safe web sites. Are there any problems?
    Then restart.

  • How to do a taskflow call without pushing an entry on the page flow stack

    Hi,
    I have a use case where I have to do a task flow call with parameters as the final state of my task flow. That is, I don't want he called task flow to ever return a value so I don't need the called task flow to be stacked over the calling one, just replace it and close the calling task flow.
    Normally, I think the good way to do that is to use an URL view activity, but in my specific case, some of the taskflow's input parameters have to be passed by reference so encoding them in a stateless way within an URL is not very exciting as it would imply pushing an id of the object that would need to be stored in the request or another shared area.
    Is there any good practice or some other method I'm not aware of to achieve this?
    Thanks,
    ~ Simon

    Hi Simon!
    If I understand you in a right way, the way to achieve this is to wrap both taskflows (calling and called as you refer them) in one external taskflow. This way, the your "calling" taskflow should return to wrapper all params you need to pass to "called" (and then you call "called" from wrapper by passing these params you got on return from "caller"). That way, the "called" is not stacked over the "calling".
    Of course, you still have both "calling" and "caller" stacked over wrapper, but that is a cost of current subroutine-style taskflow invocation mechanism provided. Basically, there is no "Go To" in taskflows (beside Url calls but without params passing – well, that is a true "Go To").
    On second thought, I'm not 100% sure but you may investigate datacontrols sharing options. If both "calling" and "called" share datacontrols with wrapper, then the stacking overhead of wrapping is negligible and you almost have your use-case.
    Regards,
    Pavle

  • After my upgrade to iOS6, my iPhone4 lost all entries in the Reading List and Bookmarks.  I cannot add new entries.  Any thoughts on how to fix this?

    I'm not 100% positive that this is related to the iOS6 upgrade, but the timing is certainly suspicios.  Previously, I had 7 entries in Safari's readling list and many entries in the Bookmarks.  Now, I have nothing except the large pair of sunglasses and help text that tells me how to add a link to the reading list.
    When I am looking at a webpage and click on the Forward button, I'm giving all sorts of choices now in full color...  facebook... Message... Twitter... Mail... Add to homescreen.  The following buttons are all grey: Print, Copy, Bookmark, and Add to Reading List.
    I'm guessing that the icon color is a red herring.  Print and Copy, despite being grey, appear to work fine.  Bookmark and Add to Reading List have problems. 
    Adding to the Reading List makes the forwarding screen go away, as though the link was added.  When I click on the Bookmark icon and look at my reading list, it remains empty, displaying the large sunglasses and help text, as though the list has never had an entry added to it.
    Adding a Bookmark prompts me to enter the name and location.  Interestingly, the list of locations is empty.  I have a single folder with no name and a check mark next to it.  I cannot do anything else (make a new folder, for example).  Once added, when I click on the Bookmark icon to look at my bookmarks, that list remains empty of individual bookmarks.  All I have are: Reading List (still empty), History (full of expected entries), Bing (which takesme to some Bing thing).
    Any help in restoring my bookmarks and Reading List entries would be appreciated.  Thanks!

    Thanks. That solved it. I had my doubts since I wasn't concerned about my lost bookmarks. I was concerned about the broken functionality. In any event, restoring from a backup solved both the functionality and the lost bookmarks. I appreciate the response!

  • What's Empty List Good For?

    I'm having a hard time understanding the point of an empty list. The following code doesn't let me add anything to the list:
    public static void main(final String[] args) {
       final List<String> mammalList = Collections.emptyList();
       mammalList.add("Dog");
       mammalList.add("Cat");
       final List<String> fishList = Collections.emptyList();
       fishList.add("Shark");
       fishList.add("Grouper");
       System.out.printf("Mammals: %s%n", mammalList);
       System.out.printf("Fish: %s%n", fishList);
    }Gives Exception in thread "main" java.lang.UnsupportedOperationException
         at java.util.AbstractList.add(Unknown Source)
         at java.util.AbstractList.add(Unknown Source)
         at Test.main(Test.java:16)
    So, if you can't use the empty list, why have it in the first place? Why not just say
    List<String> mammalList = new ArrayList<String>();What's the added value of EMPTY_LIST? What am I missing here?

    It's useful for return values from methods where the caller is not expecting a modifiable list.
    public List<String> findSomeStuff() {
      // ... do search here ...
      if(!foundResults) {
        return Collections.emptyList();
      // ... return real results
    }It's also useful for simplifying subsequent code without having to deal w/ null values.
    List<String> results = getSomeResults();
    if(results == null) {
      results = Collections.emptyList();
    // process "results" knowing it is not null
    for(String result : results) {
    }In both of these cases i don't need to instantiate a new list ("emptyList()" returns an single existing instance).

  • How to List Placed Tiffs into a BY PAGE???

    Dear Scripting team,
    Is there a way to list the name of graphics (links) on each page and make a list like:
    file1.tif Page 1
    file2.tif page 3
    file4.tif page 5
    file5.tif page 8
    I can list the graphic names with this:
    Set myInDesign = CreateObject ("InDesign.Application.CS3")
    for each element in myindesign.ActiveDocument.links
    msgbox(element.name)
    next
    BUT I can not get the page where the graphic is contained as my list above or say something like... myindesign.ActiveDocument.pages.item(1).links because it give me an error... i mean.. ican't specify the page where I wanto to get the links and also can't know the page number where the element (link) is contained...
    ANY IDEAS?? Thank you!! Thank you!!!

    >myindesign.ActiveDocument.pages.item(1).links [..] give me an error<br /><br />That's because pages do not have a links property. Whatever manual you saw that in, throw it out, and use the proper Help manual. Pages have an allGraphics property, which conveniently "Lists all graphics contained by the Page." (from the ESTK2 Help). Rather <br />i unconventiently <br />is that this graphic type first contains a link, and the link then contains a filename -- you have to string'em all together by hand.<br /><br />Try this instead. It iterates over all your pages (first loop) and over all images on that page (2nd loop). This one is sure to display the items in order of appearance (which is possibly different when iterating over all links in your document at once).<br /><br />>for (var p=0; p<app.activeDocument.pages.length; p++)<br /><br />>     for (var g=0; g<app.activeDocument.pages[p].allGraphics.length; g++)<br /><br />>          app.activeDocument.selection[0].contents = app.activeDocument.selection[0].contents+"\r"+app.activeDocument.pages[p].allGraphics[g]. itemLink.name+" Page "+app.activeDocument.pages[p].name;<br /><br />[Before running this, draw an empty text frame and place your text cursor in that.]

  • Updating List View Web Part property in page

    I have a List View web part (In the page > Add web part > App > document library name). I need to update the TitleUrl property of this web part through C# code.
    The SaveChanges() method below works for my visual web parts, but not for the List view webpart. I get an error saying: Exception has been thrown by the target of an invocation
    webpartManager = myPage.GetLimitedWebPartManager(System.Web.UI.WebControls.WebParts.PersonalizationScope.Shared);webPart.TitleUrl = titleURL;webpartManager.SaveChanges(webPart);
    I did a casting as below
    XsltListViewWebPart listViewWebPart = (XsltListViewWebPart)webPart;listViewWebPart.TitleUrl = titleURL;webpartManager.SaveChanges(listViewWebPart);
    (Please note that casting to ListViewWebpart instead of the XsltListViewWebpart gives a invalid cast exception, which is the reason why I cast it to XsltListViewWebpart) 
    But I get the error at SaveChanges() method.
    An exception of type 'System.Reflection.TargetInvocationException' occurred in Microsoft.SharePoint.dll but was not handled in user code
    The error description is as below
    >    at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[]
    > arguments, Signature sig, Boolean constructor)    at
    > System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj,
    > Object[] parameters, Object[] arguments)    at
    > System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags
    > invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)  
    > at System.Reflection.RuntimePropertyInfo.GetValue(Object obj, Object[]
    > index)    at
    > Microsoft.SharePoint.WebPartPages.BinaryWebPartSerializer.DoesPersonalizedPropertValueMatchDefaultValue(SPPersonalizablePropertyEntry
    > spPersonalizablePropertyEntry, Object value, Control defaultControl)  
    > at
    > Microsoft.SharePoint.WebPartPages.BinaryWebPartSerializer.Serialize(PersonalizationScope
    > scope, BinaryWebPartSerializerFlag binaryWebPartSerializerFlags,
    > BinaryWebPartSerializerWriter writer)    at
    > Microsoft.SharePoint.WebPartPages.BinaryWebPartSerializer.Serialize(SerializationMode
    > mode, BinaryWebPartSerializerFlag binaryWebPartSerializerFlags,
    > SPSerializationBinderBase serializationBinder,
    > BinaryWebPartSerializerWriter writer)    at
    > Microsoft.SharePoint.WebPartPages.BinaryWebPartSerializer.Serialize(SerializationMode
    > mode, BinaryWebPartSerializerFlag binaryWebPartSerializerFlags,
    > SPSerializationBinderBase serializationBinder)    at
    > Microsoft.SharePoint.WebPartPages.SPWebPartManager.SaveChangesCore(SPLayoutProperties
    > layoutProperties, Boolean httpGet, Boolean saveCompressed, Boolean
    > skipRightsCheck, Boolean skipSafeAgainstScriptCheck, WebPartTypeInfo&
    > newTypeId, Byte[]& newAllUsersProperties, Byte[]&
    > newPerUserProperties, String[]& newLinks)    at
    > Microsoft.SharePoint.WebPartPages.SPWebPartManager.SaveChangesInternal(SPLayoutProperties
    > layoutProperties, Boolean skipRightsCheck, Boolean
    > skipSafeAgainstScriptCheck)    at
    > Microsoft.SharePoint.WebPartPages.SPWebPartManager.SaveChanges(Guid
    > storageKey)    at
    > Microsoft.SharePoint.WebPartPages.SPLimitedWebPartManager.SaveChanges(WebPart
    > webPart)    at
    > WSP.ABC.ABC.ABCWindow.<>c__DisplayClass5.<ChangeWebPartProperties>b__4()
    > at
    > Microsoft.SharePoint.SPSecurity.<>c__DisplayClass5.<RunWithElevatedPrivileges>b__3()
    > at
    > Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated
    > secureCode)
    Tried casting back as below
    webpartManager.SaveChanges((System.Web.UI.WebControls.WebParts.WebPart)listViewWebPart)
    but still the error at SaveChange() is there.
    AllowUnsafeUpdates is set to true within this block and code runs in elevated privileges.

    Hi Ahamed,
    According to your description, there is an issue when you try to update the TitleUrl property of a List View Web Part.
    For a better troubleshooting, I suggest you do as the followings:
    1. Debug your code step by step and make sure every object and variable is valid.
    2. Here is a code snippet about update web part property programmatically:
    SPWeb web = SPContext.Current.Web;
    SPFile file = web.GetFile(HttpContext.Current.Request.Url.ToString());
    SPLimitedWebPartManager manager = file.GetLimitedWebPartManager(PersonalizationScope.User);
    System.Web.UI.WebControls.WebParts.WebPart webPart = manager.WebParts[this.ID];
    ((UpdateMeWebPart)webPart).Message = “Test”;
    try
    web.AllowUnsafeUpdates = true;
    manager.SaveChanges(webPart);
    finally
    web.AllowUnsafeUpdates = false;
    Here is a detailed article for your reference:
    http://jeremyknight.wordpress.com/2010/11/12/programmatically-update-web-part-properties/
    Best Regards
    Zhengyu Guo
    TechNet Community Support

  • Centering the page after a postback in struts

    so I have dependant select lists which I populate using code like the following:
    <html:select styleClass="entryform_select" property="equip_l1" onchange="this.form.mode.value = 'editNew'; this.form.submit();">so it submits the form, I then call the db to populate the second list and return to the same form with a newly populated select list. However it loads the page at the top so (especially on widescreen monitors) you have to scroll down to keep going.
    How can I make it jump down when it reloads but only after those postbacks?

    Is this something I'd need to write javascript code involving changing the focus for? or an onLoad function that can someone tell if it's recently been reloaded.
    Message was edited by:
    Piers

  • SPD Workflow will not start automatically for the first entry in a list on any given day (subsequent entries start just fine)

    Hi. I have various workflows on various lists that share a common issue. The first entry of the day on that list will not start the workflow automatically.   We have SharePoint 2013 Foundation. This same issue occurred when we had SharePoint 2010
    as well. Interestingly, I had read about a 'fix' by adding a 5 minute pause at the start of every workflow which worked fine for a while. Now I happened to find that this is no longer working (after I see a bunch of workflows that didn't fire over the past
    month - ugh!).
    I know I'm not the only one with this issue as I ran across others with the issue when I first researched it and found the 'pause fix' a year or so ago and I also talked with someone else during a SP seminar who used this same fix.  NOTE:  These
    are end users creating the items.  It is not logged as a system account.
    Any help would be appreciated.  I have a SharePoint developer I can hire if this is beyond my ability to fix.  I just need some guidance (last time I inquired they weren't aware of this issue). 

    Can you also advise if these are complicated workflows or high traffic lists?
    Steven Andrews
    SharePoint Business Analyst: LiveNation Entertainment
    Blog: baron72.wordpress.com
    Twitter: Follow @backpackerd00d
    My Wiki Articles:
    CodePlex Corner Series
    Please remember to mark your question as "answered" if this solves (or helps) your problem.

  • How to create a column where each subsequent entry is added to the former?

    How does one create a column, inside Numbers, where each subsequent cell is added, in value, to the preceding cell above it? For example, a column could be labeled "credit card subtotals for the month." In the first cell, one might insert a dollar value, eg., $24.00. The next credit card charge might be $100.00 and that would be added to the $24.00 to create a running subtotal.
    Thank you.

    Hi Jay,
    Both formulas are written as they would appear entered into C2.
    The 'special formula' is also written as it would appear in C2. Where I have used 'formula for C2' substitute your choice of the two formulas listed above the 'special formula' in my earlier post.
    If you choose to use the first version, the finished 'special formula' will look like this in C2:
    =IF(LEN(B2)>0,SUM(C1,B2),"")
    Jerry's remarks regarding using conditional formatting to suppress the display of zeroes is well taken, but in this case, will not work as there are no zero values to be hidden.
    In this case, either of the initial formulas will repeat the last 'running balance' in every cell from the last row containing an entry in column B to the bottom row of the table.
    The formula checks, by counting the number of characters displayed, whether an entry has been made in the column B cell on the same row as the formula (B2 in the example in this post. IF an entry has been made, the formula calculates the sum of that entry and the previous running balance. IF no entry has been made (ie. there are no chanracters displayed in B2, the calculation is skipped, and the empty string ( "" ) is placed in C2, giving the appearance of a blank cell.
    Example:  the formula in this post is used in column C. Column D uses the core of that formula (with the C1 reference replaced by D1) without the IF statement. Both formulas are filed down to the bottom cell in their columns. Note the difference in rows 7 and below:
    Regards,
    Barry

  • What must I do to delete an unwanted entry in the "Name" column of the Bookmarks Toolbar list in my Bookmarks Library?

    What must I do to delete an unwanted entry in the "Name" column of the Bookmarks Toolbar list in my Bookmarks Library?
    At the very bottom of the entries in the "Name" column of the Bookmarks Toolbar in my Bookmarks Library, an entry has appeared which looks different and behaves differently than all the other entries.
    And I cannot delete it.
    All of the other entries have either a small icon or an empty square symbol at the left-hand end of its row.
    This bottom entry has nothing at its left-hand end.
    It reads "7/13/14- Profile folder - Thunderbird - MozillaZine Knowledge Base".
    And if I double-click any of the other entries, that action opens its web page.
    If I double-click this bottom entry nothing happens.
    If I right-click this bottom entry, the menu that appears includes a Delete command, but it does not disappear if I try to do that.
    And if I add a new bookmark to my Bookmarks Toolbar, it does not appear in the list which is displayed in Firefox, but it does appear beneath the entry "7/13/14- Profile folder - Thunderbird - MozillaZine Knowledge Base".
    In order to make the new bookmark show up in the list which is displayed in Firefox, I must open the Bookmarks Toolbar in my Bookmarks Library, scroll to the bottom of the Name list, and drag the new bookmark up past the "7/13/14- Profile folder - Thunderbird - MozillaZine Knowledge Base" entry.
    Again, how can I get rid of this unwanted entry?

    You can check for problems with the <b>places.sqlite</b> database file in the Firefox profile folder.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    *https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
    *Places Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/

  • WRT600N Doesn't show any entries in the Wireless Client List

    Hi, my WRT600N is on firmware 1.01.35 build 3. When I check the wireless client list from the Wireless MAC Filter page, it is empty, even though I know I have 3 clients connected. They are all using 802.11g, as I don't have any N devices yet. When I go to the Status page and check the DHCP Client Table, both of my wired clients are there, but only 1 wireless client appears. The DHCP Client Log file is useless, as it only appears to log the ip address it receives from my isp. There are no entries of the ip addresses it has given out. Is my WRT600N defective, or is there firmware in the works to correct this?

    Another thing I've notice, is that the DHCP client table is showing the 2.4 wireless devices as LAN interfaces. Shouldn't it show the frequency, like it does my one 5GHz device? Things have changed, because the Wii is now showing in both the Wireless Client List, as well as the DHCP Client table. It shows as a LAN interface though, which is wrong, it should be 2.4GHz. My one pc that is a 5GHz N device, is also showing in both the Wireless Client List, & the DHCP Client table. Neither the wireless 2.4 gaming adapter, or the HR20 connected to it show up in either list. Neither does a laptop which is 2.4GHz. This is really a concern, because I've caught 2 neighbors stealing my bandwidth in the past, and I can't stop them if I can't see them.

  • HT4528 Calendar under IOS7.0.2 has been changed. does not work the same. what happened to LIST mode (multiple entries being displayed in list format) or am i doing something wrong?

    I got use to using Calendar app where multiple entries are stacked under IOS6.  Under iOS7.0.2 I enter a new appointment and after the entry I can not find the new appointment after i click on done.  Am I doing something incorrect HELP!

    The list view does not appear to be among the "standard views" for the Calendar app in iOS 7.0.x.  You can still get the list view by going to the day view and hitting the search button (magnifying glass icon).

Maybe you are looking for