Self-registration and the WWSSO_API_USER_ADMIN package

I am using the wwsso_api_user_admin package to build a self registration JPDK portlet for my client to be run on the Portal Welcome page and I have a few questions. Just so you know, I am using Oracle 8.1.7.1.1 and Oracle Portal 3.0.9.8.2 all running on Win 2000.
1. The package spec ssoumgt.pks is not clear as to which warning codes and exceptions can be returned or raise from create_user. All the other procedures in that package have explicit comments about which warnings and/or exceptions can possibly occur, but create_user does not. It makes sense that it would return OK_SO_FAR and DUP_USERNAME, but are there any other return codes and/or exceptions?
2. The package spec ssoumgt.pks also states that the create_user procedure "will raise an exception if a dupicate user is created." During my unit testing, I only recieve a DUP_USERNAME warning when I try to register a username twice. Is there a similar exception, and if so, what causes it to be raised? The phrase in the spec also makes it sound like the duplicate username is created anyway before the exception or warning is returned. I suspect that the package has change, but someone forgot to update the comments in the package spec. Can you clarify this?
3. In Portal, under Login Server Administration, I have set the Login Server configuration to disallow passwords to be the same as the user name and required passwords to contain at least one numeric digit and one character. However, these restrictions are not enforced by the create_user procedure in the wwsso_api_user_admin package. I can even supply a NULL password and the account is created in the login server. Is this a bug or am I not getting something?
Thanks,
Dennis

are you working with 9iAS portals?
portal_sso (or portal30_sso) schema was used to be in the 9iAS system. in the 10g family, it was replaced by orasso which resides in the infrastructure db.
AMN

Similar Messages

Self Registration and Attestation is not working in OIM 9.1.0.4

Hi,
i have setup a new OIM environment using OC4J. I am able to create users and provision IT resource but self registration and attestation is not working. not sure it is OC4J issue or OIM issue. For self registration it says request is submitted but when I login as xelsysadm and dlon't see any pending request and same thing happens for attestation. It dowsn't display any error but never gets completed and don't see this also in pending request list. If anybody has idea to debug the issue then let me know and thanks for help.
Thanks,
HC

As per given bug it is looking for jars which is missing
have you install connector using deployment manager?? if yes it copy required jars at target location. verify if not there copy jars in Scheduled Task folder.
Check the document if any external jars required and same put at ThirdParty folder

Triggering the Self-Registration of the Adapter Engine ???

Hi,
   We have a central SLD. Also we have the SLD of XI.
   When coming to the post configuration step of "Triggering the Self-Registration of the Adapter Engine" it is said to
               Restart the application <b>com.sap.aii.af.cpa.app</b> to trigger the SLD self-registration of the central Adapter Engine.
1.        In which SLD should i restart it ?
2.    if it is in XI SLD, then i can see <b>com.sap.aii.af.cpa.app</b> this under three options (EJBContainer, LogConfigurator, metamodelrepository) in the right hand pane of DEPLOY in the XI Visual Administrator.
Request you kindly answer these questions.
Thanks
Sourav

Could solve this.
   Go to Deploy option in Visual Administrator, on the right hand pane, select "Applications" radio button and you will find the com.sap.aii...., just select that stop it and again start it.
Thats it...
Thanks
   Sourav

Self-registration of the central Advanced Adapter Engine

Hi Expert,
We have installed netweaver PI 7.1 system, as well as done the post installation
Now we want to restart the below mention services, But thing is that we are un able to find this services in list, can any one guide us how see this services in system
○       com.sap.aii.af.app
○       com.sap.aii.af.cpa.app
See as per the http;//help.sap.com
follow the below procedure
You perform this step to trigger the self-registration of the central Advanced Adapter Engine and of the Runtime Workbench in the System Landscape Directory (SLD).
Procedure
Perform the following steps:
       1.      Start the SAP NetWeaver Administrator.
       2.      Choose Operation Management ® Systems ® Start & Stop ® Java EE Applications.
       3.      Stop and restart the following applications to trigger the SLD self-registration of the central Advanced Adapter Engine and the Runtime Workbench.
○       com.sap.aii.af.app
○       com.sap.aii.af.cpa.app
○       com.sap.xi.rwb
please guide me to restart this services
Thanks
DDM

Hi All,
I solve this issue, I have logon by j2ee and find below mention service and restart the same
Thanks
DDM

Self registration and challenge questions

Hi All,
From OIM, under Self-Register a user may Create Request for self registration. The user would be presented with the "User Information" fields to fill out. The user is also asked to answer some pre-defined challenge questions.
Please help me with the following questions:
1. Is there a way to not ask the challenge questions on this User Self-Registration form?
2. Would it be possible to use some of the "User Information" fields such as MMDD of DOB, last 4 SSN, etc... to automatically populate the answers and questions in the PCQ table? This is to avoid asking the user to fill in the same values twice, once in the User Information fields and another time in the Challenge questions.
Thanks

Thank you for all your suggestions.
After I changed the system configuration as stated in my second post message, I could no longer login to OIM. After I input the userID (xelsysadm) and password, the same login page showed up again without any error message.
When I tried "Forgot Password?" and input the UserID (xelsysadm), I got the message:
Your Oracle Identity Manager challenge Questions are not defined. Contact your System Administrator.
When I tried to login to the Design Console as xelsysadm, I get this error:
Sep 12, 2008 12:11:23 PM oracle.j2ee.rmi.RMIMessages EXCEPTION_ORIGINATES_FROM_T
HE_REMOTE_SERVER
WARNING: Exception returned by remote server: {0}
oracle.oc4j.rmi.OracleRemoteException: java.lang.NullPointerException
at com.evermind.server.ejb.EJBUtils.getUserException(EJBUtils.java:346)
at com.evermind.server.ejb.interceptor.system.AbstractTxInterceptor.conv
ertAndHandleMethodException(AbstractTxInterceptor.java:69)
at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invo
ke(TxRequiredInterceptor.java:52)
What did I do wrong?
Thanks

I want Photoshop and InDesign- If I buy two "single app" subscriptions it is $40/month but if I buy the single app subscription for InDesign and the Photography package it is $30/month. Am I missing something? Are these different versions of Photoshop?

I want Photoshop and InDesign- If I buy two "single app" subscriptions it is $40/month but if I buy the single app subscription for InDesign and the Photography package it is $30/month. Am I missing something? Are these different versions of Photoshop?

Hi,
No it's the same Photoshop .Photography program is just a temporary promotion pack with Photoshop and Lightroom and it can end anytime .So you can buy Indesign and photography to have Indesign,Photoshop and Lightroom .
Regards,

User self-registration in the portal

I am developing an Intranet site for a very large organization using OPortal 3.0. Since is impossible to manage personally every request to add users to the portal (over 3000 potential users) I need to provide a self-registration procedure so users can register themselves to the portal with certain basic privileges.
Does anybody knows how can I implement such a procedure..?
Fernando

Hello Fernado,
Look topic name "Using API's for Single Sign On" at this forum.There is an answer to your question.Also you can:
'Create a procedure which does insertion to the tables portal30.wwsec_person$ and portal30_sso.wwsec_person$'.My procedure is:
CREATE OR REPLACE PROCEDURE PORTAL30_SSO.CREATE_USER
(username IN VARCHAR2)
as
begin
insert into portal30.wwsec_person$
(user_name,db_user,created_by_dbuser,created_by_user,password,sso_user_type)values (upper username), 'PORTAL30_PUBLIC','PORTAL30_PUBLIC','PORTAL30','guest','USER');
insert into portal30_sso.wwsec_person$
(user_name,db_user,created_by_dbuser,created_by_user,password,sso_user_type) values (upper(username),'PORTAL30_SSO_PUBLIC','PORTAL30_SSO_PUBLIC','PORTAL30','hy?<K2K0~4FA810F520ACB67945FFFA7F03925269','USER');
end;
After that create a form to this procedure and publish as portlet.Now put this portlet your 'Welcome' window.Here they will have default password 'guest'.Also you can take another parameters like name,lastname,address,etc.
Don't forget to give public privilege to this procedure.

Self Registration and More

Hello Everyone,
We are trying to protect one resource. We have installed Oracle Identity and Access Management Suite and also OID, OVD.
What we want is to create external users through self registration in OIM and then provisioned them to OID. but what after user creation, will those users just stare at the screen. I mean, is there any way to redirect them to OAM protected resource link ?
Or another thing that I came across while I googled was that: user goes to protected resource link and he is a new user so he clicks on new registration button from there he gets redirected to OIM S Registration link, there he gets self registered and provisioned to OID, and again get redirected back to that OAM protected resource page.
Dont know if above thing is possible or not, if it is ? Please let me know how it can be achieved.
Really seek guidance
Thanks,
PS

Thanks for the reply.
I think for now, we want to go with the out of the box page, except the link to OAM protected url.
It would really be great, if you could please suggest on where & how to provide link to OAM protected url on the OIM self registration page ?
Thanks,
PS

Self registration and alias

Hi community,
as I've been told, I move my thread to this place, hoping to have much answers
this is the situation I am facing : on a 7.01 portal SSO-connected to a R3 back end, my datasource is ABAP, and I have activated self registration onto my portal.
Users are well created in ABAP, but my difficulty is here : we work with alias, and the created users with self registration have no alias, the alias field is not automatically populated with the provided logon id (as it is made with a java datasource...).
A simple trick would be to populate the Alias ABAP field with the logon ID or the email address entered in the self registration screen, but I have no idea on how to do that...
Does anyone has a hint to help me the way to find in which configuration searching this automatical alias population ?
Thanks a lot.
Fabien.

Seems to be possible to create a user exit in CRM to do that, but not in the portal directly.
Fabien.

Self registration and modification of tjspSelfRegistrationTiles.jsp

Hello,
How can the tjspSelfRegistrationTiles.jsp be modified to add a combo box to the self registration form?
Where can we find this file? Do we need to also modify the FormMetadata.xml file?
Where can we find documentation on how to modify the tjspSelfRegistrationTiles.jsp file?
Thanks
Khanh

Hi
To add a combo box to OIM Self-reg page you need to modify both FormMetaData.xml and jsp.
For example you need to add the following code in xml.
under <FormManagementMetaData>
<Attribute name="Users.Title" label="global.label.title" displayComponentType="ComboBox" dataLength="80" map="Users.Title" useInRule="true" />
this is the attribute
Add label to xlWebAdmin_en_US.properties file.
Now add the reference inside <Form name="SelfRegistrationUserForm">
<AttributeReference optional="false">Users.Title</AttributeReference>
Now in jsp .
<logic:equal name="field" property="type" value="ComboBox">
<html:select name="selfRegistrationForm" property="<%=msName%>"styleClass="Fields">
<html:option value=""></html:option>
</html:select >
<logic:notEqual name="field" property="type" value="ComboBox">
place it at appropriate positions.
Add

Air 3.6 and the fl package

I just switched over to air 3.6 in Flash Professional. I'm compiling with air 3.6.0.5990 which I believe is the latest version. When I start a new Actionscript 3 file, and include a TLFTextField, and then compile for Air for IOS the app won't run. The initial loading screen (e.g. default.png) comes up, and then I simply get a blank screen and nothing happens. If I take out the TLFTextField, then it works (for example, if I draw a simple circle on the stage just to test if it is rendering). My main application I develop will not run as well. I get the same issue - simply a blank screen. It's a frustrating problem as there isn't really a way to debug - if an incorrect element (like TLFTextField) is included it simply doesn't run. I took all of the TLFTextField elements out of my app and it still just has a blank screen on IOS. Things work fine with Air 3.4.
I've noticed that all the fl package elements have been removed from the actionscript documentation. I use many controls from the fl.controls. package, for example. Has the entire fl package been deprecated? (it's frustrating it's simply gone from the documentation as well - I haven't been able to find any indication anywhere why it has been removed or even that is has been removed. It's just gone. It feel a little twilight zone'ish - feels like I was the only person using it lol, even though Flash CS6 has an actual UI to pull those elements in).
Does the entire fl package not work any more?
Any suggestions on how to debug this type of situation and find other items like TLFTextField that no longer work, so that I can remove them and get my apps working on IOS?
Any suggestions on what I can use to replace all the fl.controls elements I am currently using?
thanks
Tom

well i got my solution and writing the solution may be it will help some one
the actual problem with my application is am using TLFTEXTFIELD and TLFTEXTFIELD directly not supported in air sdk 3.7 so you can remove the tlftext or use this solution
For Flash CS6, copy this swc: /Applications/Adobe Flash CS6/Common/Configuration/ActionScript 3.0/libs/flash.swc
Into my Flash Builder project using these steps:http://interactivesection.files.wordpress.com/2009/06/include_fl_packages_in_flex_builder- 1.jpg
and then use this link http://curtismorley.com/2013/03/05/app-used-to-work-with-air-3-2-or-3-4-doesnt-work-with-a ir-3-5-or-3-6/#comment-241102

OIM - Self Registration and Virtual Recognition

Does anyone know if it's possible to integrate visual recognition (type in what you see) when a user is creating a self registration request? If possible, what is the level of effort?

Thanks for the reply.
I think for now, we want to go with the out of the box page, except the link to OAM protected url.
It would really be great, if you could please suggest on where & how to provide link to OAM protected url on the OIM self registration page ?
Thanks,
PS

Flash CS6 and the old Packager for iPhone?

Hi,
I was wondering: now that it's possible to select an Air SDK version in Flash CS6, would it also be possible to use Flash CS6 with the old 'packager for iPhone' that came with Flash CS5?
I know, I know, I should get rid of that old thing, but reality is that I used packager for iPhone to create one of my first apps and now I can't update to a newer version of Air. Apple doesn't allow that, because existing users wouldn't be able to update anymore.
It would be great if CS6 can work with the old Packager for iPhone.
Does anyone know the answer to this?

Too bad... I was hoping to kick my old CS5 installation out of the window...

Self registration of the java engine in central sld

hi all,
iam installing solution manager on windows2003, with maxdb..
i have two options one is .1) register in existing sld
and the other is 2) configure local sld
so i chose the 1st one.
need to know how to register it like sld host name, sld port and so on...
Thank you,
ravi.

Hi,
For SLD configuration during installation,
SLD HTTP HOST - can be any name need not be your computer name. E.g <SID>SLD or <SID>SLDSRV or something like that.
SLD HTTP PORT - the port would be 50<instancenumber>00
eg:- 500100 where 01 is instance number.
as SLDDATA SUPPLIER USER and SLD ABAP API USER are automatically populated. just maintain your password.
That's it.
This will solve your problem. Feel free to revert back.
--Ragu

Extended Attributes - Glibc and the 'attr' package

Glibc implements the (semi-standard) EA functions: {,l,f}setxattr, {,l,f}getxattr, {,l,f}removexattr, {,l,f}listxattr. the interface of which is accessible via sys/xattr.h.
In core there is an 'attr' package -required by acl and more- that includes the exact same functions, the interface is in attr/xattr.h.
I see that attr includes some more -mostly convenience- functions, but other then that are they the same? when should one prefer one over the other?
thanks.

That's what I thought first, but look at the (attr) source, it can't go more straight-forward...
most of the other libattr functions are just for compatibility with Irix, (the only exceptions seems to be the attr_copy_* functions).
On Acl-devel they say:
The libattr interfaces predate the glibc interfaces - they were used
when we were originally developing the tools.
These days, you should always use the glibc variant.
thanks anyway.

Self-registration and the WWSSO_API_USER_ADMIN package

Similar Messages

Maybe you are looking for