Send and receive email from midlet app

I know it has been asked many time in this forum, just want to make it clearer for me. Is it possible to do these from midlet without using servlet? And why many people tend to use servlet than just make it directly from the midlet?
And if I'm trying to encrypt the text being sent, should i encrypt it in the midlet or in the servlet? Thanks.

Is it possible to do these from midlet without using servlet?Yes. You will have to either implement the mail protocol yourself or use some third party implementation for sending and receiving mails.
And why many people tend to use servlet than just make it directly from the midlet?I guess this is because JavaMail apis are readily available which makes the task simpler.

Similar Messages

Can I use iCloud for sending and receiving emails from my own domain name?

Hello,
Hope that someone can help me please.
I have my own unique registered domain name.
Currently I am using the gmail server to transmit and receive email - I am using Mail on a MacBook, and an iPhone. Works just fine.
However, I was wondering if the iCloud can be set up to also provide this same function?
If so how do we achieve this?
Appreciate your comments and advice.

Please ignore this question. Or tell me how to delete it.

I have a Mac Pro and an iPad and an iPhone. I can send and receive emails from my gmail account; however, I have a second account and I can receive emails on all 3 devices, but NOT send any emails on this second account on the iPhone or the iPad

cannot send emails on the second account on iPad and iPhone, yet I can on the Mac Pro

Hello Maria,
Most issues with Mail on your iOS devices can be resolved by following the steps in the article below. For your specific issue, you may need to remove the account and add them back in.
Get help with Mail on iPhone, iPad, and iPod touch
http://support.apple.com/en-us/TS3899
Regards,
-Norm G.

Ipod touch generation 2 ~ I can't send or receive emails from my gmail account. I have gone back to factory settings and updated the device. It will not take my password.

I have not used this Touch iPod for quite some time and thought I would use it for collecting email when I am out. I have wasted a lot of time trying to get this to work and now wonder if the 2nd generation is too old to send and receive email.

I am using imap on all my other devices. I use a Google domain email address. The only divice I have that will not sync is this older generation iTouch. The version without the camera. Model PB528LL. I know my email address is correct and the password works everywhere else.

Can ipod touch 4th generation send and receive messages from a phone number?

I have an iphone number connected to imessage but my iphone broke. On my mac messages app it allows me to be reached at (my phone number). Is it possible on the ipod touch 4th generation to send and receive messages from my phone number as opposed to an email address?

Only if you have an iPhone using with iOS 6 or greater using the same APple ID for Settings>Messages>Send and Recevice.
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage

Can no longer send or receive email from any account after Security Update

Hello,
I have a problem with my email in Mail. I let software update install the latest security update (007) a few days ago. I have not been able to send or receive my email since the update. I have several accounts and use Mail as my client for all. This includes my mac.com account, 3 att.net accounts and my website email. All give me the same error which is an SSL thing and has something to do with the certificates. I am able to receive email if I turn SSL off on the ATT accounts but not the mac.com (and if I try to collect my email with SSL off I get an angry message from ATT warning me I am not allowed to do so) and I cannot send any at all from any account.
The error message reads "unable to connect- there may be a problem with the mail server or network.... The server error encountered was: Mail was unable to verify the identity of this server, which has a certificated issued to "mail.mac.com". The error was: An SSL error occured while trying to read data from the server. Verify this server supports SSL and that your account settings are correct". It then states that the certificate could not be verified.
The certificate date on the mac.com account reads May, 29th , 2010.
I also have an iMac and a MacBook Pro which are also running Tiger. I have not and will not run the security update on these machines until I find out why it has messed up my email on the G5. I can still send and receive email with the exact same account settings on the MacBook so I know it is not the settings but something to do with the Security Update.
Has anyone else had trouble with this update? Any advice?

Hello and Welcome to Apple Discussions ...
I don't know if this is a corrupted preference file or not, but it sure can't hurt to try this.
If Mail is open, Quit Mail.
/Users/YourName/Library/Preferences/com.apple.mail.plist
Drag that .plist file to the Desktop. Launch Mail and see if you can send or receive e-mail. If you can, that .plist file is corrupted. Drag it to the trash, empty the trash and reboot. Your Mac will create a new preference file for you the next time you launch Mail.
Also... run Disk Utility and Repair Disk Permissions. Disk Utility is in your Applications/Utilities folder. Launch DU, select MacintoshHD 10.x.x in the panel on the left, select the FirstAid tab, click Repair Disk Permissions. Quit DU when it's finished and reboot.
Carolyn

I cant send or receive emails from my second email account on my iphone. i have uploaded i0S7 how can i fix this problem?

i cant send or receive emails from my second email account on my iphone. i have loaded i0S7. i was told that it doesnt like two emails with the same address so i changed from a hotmail to a yahoo account and still not working. can anyone tell me whats going on? thank you

Contact the email provider to troubleshoot the issue.
hotmama4278 wrote:
i was told that it doesnt like two emails with the same address
That's a load of manure.

Can't send or receive email from one account

Just bought the iPod Touch last week. Set up Hotmail account with no problems. However my MacDialup.com account (used to be dial up, but is DSL now) won't work at all. They aren't set up to use SSL, so I turned that off after the iPod automatically tried it. I tried IMAP and POP, tried changing incoming server port number from defalt 143 to 110, triple checked spelling on every single entry including password. Tried calling my ISP tech support and talked to a tech who owns an iPhone and lives in the bay area, but he couldn't figure it out. I tried deleting the MacDialup account then syncing the Touch to my iTunes on my MacBook Pro (which has no problem sending or receiving email from this same account) and had the email settings imported from the MacBook Pro - still no luck. Tomorrow I'll try bringing both my MacBook Pro and iPod Touch into the Genious Bar. Maybe they can figure it out.

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

Exchange 2007 - User's mailbox disappeared in EMC but they can still send and receive email

We have a user that was complaining about not being in the address book anymore. After I did a little rooting around in management console I noticed that their mailbox was no longer listed under Recipient Configuration -> Mailbox, but what's weirder
is I can do a search and find her listed in the results - at which point I can right-click her name and do everything I normally can with no problem. Listing all of the mailboxes with PS shows her still there too. As far as I know, she is the only user
having this problem.
She can send and receive email just fine, but like I said, she is no longer in the global address list so other users have trouble sending her stuff. At her computer, I tried repairing her email (under account settings) but the process would fail when
searching for her settings. I don't know if this is a stupid thing to add, but I did run Clean-MailboxDatabase on our first storage group to see if her mailbox had been deleted or disconnected or whatnot but nothing is currently showing up in Recipient
Configuration -> Disconnected Mailbox.
Some info on our setup:
Exchange 2007 on Windows Server 2003r2
AD is on Windows Server 2008r2
Her computer is running Outlook 2010
I did restart our Exchange server 2 days ago to update VMWare tools, but no Windows updates were installed. She couldn't tell me exactly when this problem started, but it was more-than-likely in the last couple of days as she was recently married and
I had to change her name in AD and Exchange - so everything was confirmed 100% functioning 2-3 weeks ago.
I'm at a lost for what the issue could be, but then again Exchange isn't exactly my forte, so any help would be much appreciated.

First things first - is her mailbox hidden from address lists? Run
Get-Mailbox <alias> | Fl HiddenFromAddressListsEnabled to find out. It probably isn't, but we need to clear this, just in case.
Now, assuming it is not hidden, have you searched for both her maiden and married names in your directory? Often, when the name on a mailbox is changed, the display name is not - and vice versa. Also, has her email address also changed?
If so, has a secondary proxy address been added to reflect her maiden name? I'd do this, just to be sure things aren't lost that should be delivered to her.
I can't think of anything else obvious right now. After you've checked these things, get back to us with their results.

Unable to send and receive email for external domain

Hi,
I just installed Exchange Server on my 2K8 domain controller. I have set up the send connector and made necessary changes to the receive connector as well. I have updated the DNS records as well on my domain registrar. I can access OWA from outside my companies
network and is able to send and receive emails for my domain but unable to send or receive emails to any other domain. I have checked the delivery report and it says that the message has been queued on the server.
I also did nslookup. Results mentioned below:
C:\Users\Administrator>nslookup www.google.com
Server: localhost
Address: ::1
Non-authoritative answer:
Name:    www.google.com
Addresses: 2404:6800:4009:802::1014
          74.125.236.145
          74.125.236.148
          74.125.236.146
          74.125.236.144
          74.125.236.147
C:\Users\Administrator>nslookup www.microsoft.com
Server: localhost
Address: ::1
DNS request timed out.
    timeout was 2 seconds.
DNS request timed out.
    timeout was 2 seconds.
*** Request to localhost timed-out
Any help would be much appreciated!

Hi hg01,
According to your description, I notice that you installed Exchange server on a DC.
It is not recommended to install Exchange server on a DC. I suggest install Exchange server on a member server. More details to see:
Installing Exchange on a domain controller is not recommended
http://technet.microsoft.com/en-us/library/ms.exch.setupreadiness.warninginstallexchangerolesondomaincontroller(v=exchg.150).aspx
About your issue, cannot send and receive externally, I suggest make sure the DNS can be resolved first.
Then, check whether Outlook Anywhere has been enabled. If not, please enable it on both Exchange server and Outlook client side.
Last, try to configure both Send Connector and Receive Connector.
More detailed error message will be helpful for the further troubleshooting.
Thanks

I can't send or receive emails from my Mac...please help

I can't send or receive emails from my Mac...please help

OS X Mail: Troubleshooting sending and receiving email messages

I need send and receive emails for edge server 2010

i have exchnage 2010 in our orgnization now working fine , i can send and receive emails for hub and also we have tmg and fortigate firewall(200B) , already install and configuration edge server(configure edge subscribtion file and edge sync) but still message
sent form hub and also receive form hub , what to do to receive from edge ? please help me i have 3 month search to fix his problem.

Hello,
I recommend you use the Test-EdgeSynchronization cmdlet to check if the subscribed Edge Transport servers have a current and accurate synchronization status. If you have configured EdgeSynchronization successfully, please delete send connector
on Hub transport server.
Please uncheck "anonymous users" on receive connector for Hub server.
Please follow the ExchangeITPro's suggestion to check DNS MX record.
Cara Chen
TechNet Community Support

Problems sending and receiving emails using exchange when on wifi - OK when using Sim Card

I've an iphone 4S using Exchange to link up with company server, this works fine when using 3G - phone's Sim Card. But when I join a wifi network I can no longer send and receive emails until I disconnect from the wifi network.
Has anybody any ideas?

Hi Derick,
you need to make sure the following is met:
1- router is correclt setup and antennas are plugged
2- users are withint good range from the router
3- use a good channel for the router, one of either 1, 6 or 11. try to figure out which is the best channel to choose using a freeware site survey tool.
4- ssid configuration doesn´t involve eap and session timeouts.
if you have doubts, let me know
cheers
Serge

I have the latest version of Thunderbird, my hyperlinks used to work fine now they don't work anymore I can send and receive email

I am running version 24.4.0 I can send and receive email but when I get an email that has a hyperlink that I click on and go to. But we don't go anywhere, I tried running in the safe mode that that help, tried rebooting that didn't help. I have an earlier version on my laptop that works fine.

https://support.mozilla.org/en-US/kb/Hyperlinks-in-Messages-Not-Working

How do I send and receive email with my @me email account

I want to drop yahoo as my email provider, so how do I send and receive email using my @me account. Using yahoo, you go to yahoo, then mail and your good to go. I'm not a tech expert and fairly new to apple products and would like the improved security of an apple address.

Hi stephraerae,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
iOS: Adding an email account
http://support.apple.com/kb/ht4810
iCloud is one of the options you can choose for your email provider.
iCloud: Set up iCloud Mail on your devices
http://support.apple.com/kb/PH2621
This article includes the specific iCloud server settings:
iCloud: Mail server information
http://support.apple.com/kb/HT4864
Hope that helps ...
- Judy

Send and receive email from midlet app

Similar Messages

Maybe you are looking for